RESUMEN
We present a facile approach to transform multilayer graphene to single-layer graphene in a gradual thinning process. Our technique is based upon gradual etching of multilayer graphene in a hydrogen and nitrogen plasma environment. High resolution transmission microscopy, selected area electron diffraction and Raman spectroscopy confirm the transformation of multilayer graphene to monolayer graphene at a substrate temperature of â¼ 400 °C. The shift in the position of the G-band peak shows a perfect linear dependence with substrate temperature, which indicates a controlled gradual etching process. Selected area electron diffraction also confirmed the removal of functional groups from the graphene surface due to the plasma treatment. We also show that plasma treatment can be used to engineer graphene nanomesh structures.
RESUMEN
We report the synthesis and fatigue characterization of fiberglass/epoxy composites with various weight fractions of graphene platelets infiltrated into the epoxy resin as well as directly spray-coated on to the glass microfibers. Remarkably only â¼0.2% (with respect to the epoxy resin weight and â¼0.02% with respect to the entire laminate weight) of graphene additives enhanced the fatigue life of the composite in the flexural bending mode by up to 1200-fold. By contrast, under uniaxial tensile fatigue conditions, the graphene fillers resulted in â¼3-5-fold increase in fatigue life. The fatigue life increase (in the flexural bending mode) with graphene additives was â¼1-2 orders of magnitude superior to those obtained using carbon nanotubes. In situ ultrasound analysis of the nanocomposite during the cyclic fatigue test suggests that the graphene network toughens the fiberglass/epoxy-matrix interface and prevents the delamination/buckling of the glass microfibers under compressive stress. Such fatigue-resistant hierarchical materials show potential to improve the safety, reliability, and cost effectiveness of fiber-reinforced composites that are increasingly the material of choice in the aerospace, automotive, marine, sports, biomedical, and wind energy industries.