Iatrogenic necropolitics: forced anal examinations and state-sanctioned homophobia.

In 2016, Human Rights Watch, an international human rights organisation, published a report on the use of forced anal examinations to identify and prosecute putative 'homosexuals'. The report provided detailed descriptions and first-person accounts of these examinations in several countries in the Middle East and Africa. Drawing on theories of iatrogenesis and queer necropolitics, this paper uses these accounts and other reports of forced anal examinations to explore the role of medical providers in the 'diagnosis' and prosecution of homosexuality. The goal of these medical examinations is explicitly punitive rather than therapeutic, making them quintessential examples of iatrogenic clinical encounters which harm rather than heal. We argue that these examinations naturalise socioculturally derived beliefs about bodies and gender that construct homosexuality as 'readable' on the body through close medical inspection. These acts of inspection and 'diagnosis' reveal broader hegemonic state narratives of heteronormative gender and sexuality, both within countries as well as internationally as different state actors circulate and share these narratives. This article highlights the entanglement of medical and state actors, as well as contextualises the practice of forced anal examination within its colonial roots. Our analysis offers the potential for advocacy and holding medical professions and states accountable.

Artificial intelligence in the prediction of venous thromboembolism: A systematic review and pooled analysis.

BACKGROUND: Accurate diagnostic and prognostic predictions of venous thromboembolism (VTE) are crucial for VTE management. Artificial intelligence (AI) enables autonomous identification of the most predictive patterns from large complex data. Although evidence regarding its performance in VTE prediction is emerging, a comprehensive analysis of performance is lacking. AIMS: To systematically review the performance of AI in the diagnosis and prediction of VTE and compare it to clinical risk assessment models (RAMs) or logistic regression models. METHODS: A systematic literature search was performed using PubMed, MEDLINE, EMBASE, and Web of Science from inception to April 20, 2021. Search terms included "artificial intelligence" and "venous thromboembolism." Eligible criteria were original studies evaluating AI in the prediction of VTE in adults and reporting one of the following outcomes: sensitivity, specificity, positive predictive value, negative predictive value, or area under receiver operating curve (AUC). Risks of bias were assessed using the PROBAST tool. Unpaired t-test was performed to compare the mean AUC from AI versus conventional methods (RAMs or logistic regression models). RESULTS: A total of 20 studies were included. Number of participants ranged from 31 to 111 888. The AI-based models included artificial neural network (six studies), support vector machines (four studies), Bayesian methods (one study), super learner ensemble (one study), genetic programming (one study), unspecified machine learning models (two studies), and multiple machine learning models (five studies). Twelve studies (60%) had both training and testing cohorts. Among 14 studies (70%) where AUCs were reported, the mean AUC for AI versus conventional methods were 0.79 (95% CI: 0.74-0.85) versus 0.61 (95% CI: 0.54-0.68), respectively (p < .001). However, the good to excellent discriminative performance of AI methods is unlikely to be replicated when used in clinical practice, because most studies had high risk of bias due to missing data handling and outcome determination. CONCLUSION: The use of AI appears to improve the accuracy of diagnostic and prognostic prediction of VTE over conventional risk models; however, there was a high risk of bias observed across studies. Future studies should focus on transparent reporting, external validation, and clinical application of these models.

Deep Metric Learning for Scalable Gait-Based Person Re-Identification Using Force Platform Data.

Walking gait data acquired with force platforms may be used for person re-identification (re-ID) in various authentication, surveillance, and forensics applications. Current force platform-based re-ID systems classify a fixed set of identities (IDs), which presents a problem when IDs are added or removed from the database. We formulated force platform-based re-ID as a deep metric learning (DML) task, whereby a deep neural network learns a feature representation that can be compared between inputs using a distance metric. The force platform dataset used in this study is one of the largest and the most comprehensive of its kind, containing 193 IDs with significant variations in clothing, footwear, walking speed, and time between trials. Several DML model architectures were evaluated in a challenging setting where none of the IDs were seen during training (i.e., zero-shot re-ID) and there was only one prior sample per ID to compare with each query sample. The best architecture was 85% accurate in this setting, though an analysis of changes in walking speed and footwear between measurement instances revealed that accuracy was 28% higher on same-speed, same-footwear comparisons, compared to cross-speed, cross-footwear comparisons. These results demonstrate the potential of DML algorithms for zero-shot re-ID using force platform data, and highlight challenging cases.

Assessment of In-Use NOx Emissions from Heavy-Duty Diesel Vehicles Equipped with Selective Catalytic Reduction Systems.

This work evaluated the nitrogen oxide (NOx) emissions of 277 heavy-duty diesel vehicles (HDDVs) from three portable emission measurement system testing programs. HDDVs in these programs were properly maintained before emission testing, so the malfunction indicator lamp (MIL) was not illuminated. NOx emissions of some HDDVs were significantly higher than the certification standard even during hot operations where exhaust temperature was ideal for selective catalytic reduction to reduce NOx. For engines certified to the 0.20 g/bhp-hr NOx standard, hot operation NOx emissions increased with engine age at 0.081 ± 0.016 g/bhp-hr per year. The correlation between emissions and mileage was weak because six trucks showed extraordinarily high apparent emission increase rates reaching several multiples of the standard within the first 15,000 miles of operation. The overall annual increase in NOx emissions for the HDDVs in this study was two-thirds of what was observed in real-world emissions for HDDVs at the Caldecott Tunnel over the past decade. The vehicles at the Caldecott Tunnel would include those without proper maintenance, and the inclusion of these vehicles possibly explains the difference in the rate of emission increase. The results suggest that HDDVs need robust strategies to better control in-use NOx emissions.

Lumbar spine loads are reduced for activities of daily living when using a braced arm-to-thigh technique.

PURPOSE: To evaluate the effect of the braced arm-to-thigh technique (BATT) (versus self-selected techniques) on three-dimensional trunk kinematics and spinal loads for three common activities of daily living (ADLs) simulated in the laboratory: weeding (gardening), reaching for an object in a low cupboard, and car egress using the two-legs out technique. METHODS: Ten young healthy males performed each task using a self-selected technique, and then using the BATT. The pulling action of weeding was simulated using a magnet placed on a steel plate. Cupboard and car egress tasks were simulated using custom apparatus representing the dimensions of a kitchen cabinet and a medium-sized Australian car, respectively. Three-dimensional trunk kinematics and L4/L5 spinal loads were estimated using the Lifting Full-Body OpenSim model and compared between techniques. Paired t-tests were used to compare peak values between methods (self-selected vs BATT). RESULTS: The BATT significantly reduced peak extension moments (13-51%), and both compression (27-45%) and shear forces (31-62%) at L4/L5, compared to self-selected techniques for all three tasks (p < 0.05). Lateral bending angles increased with the BATT for weeding and cupboard tasks, but these changes were expected as the BATT inherently introduces asymmetric trunk motion. CONCLUSION: The BATT substantially reduced L4/L5 extension moments, and L4/L5 compression and shear forces, compared to self-selected methods, for three ADLs, in a small cohort of ten young healthy males without prior history of back pain. These study findings can be used to inform safe procedures for these three ADLs, as the results are considered representative of a mature population.

Evolution of surface morphology of Er:YAG laser-machined human bone.

The extensive research on the laser machining of the bone has been, so far, restricted to drilling and cutting that is one- and two-dimensional machining, respectively. In addition, the surface morphology of the laser machined region has rarely been explored in detail. In view of this, the current work employed three-dimensional laser machining of human bone and reports the distinct surface morphology produced within a laser machined region of human bone. Three-dimensional laser machining was carried out using multiple partially overlapped pulses and laser tracks with a separation of 0.3 mm between the centers of consecutive laser tracks to remove a bulk volume of the bone. In this study, a diode-pumped pulse Er:YAG laser (λ = 2940 nm) was employed with continuously sprayed chilled water at the irradiation site. The resulting surface morphology evolved within the laser-machined region of the bone was evaluated using scanning electron microscopy, energy dispersive spectroscopy, and X-ray micro-computed tomography. The distinct surface morphology involved cellular/channeled scaffold structure characterized by interconnected pores surrounded by solid ridges, produced within a laser machined region of human structural bone. Underlying physical phenomena responsible for evolution of such morphology have been proposed and explained with the help of a thermokinetic model.

The Effects of Personalized Versus Generic Scaling of Body Segment Masses on Joint Torques During Stationary Wheelchair Racing.

The anthropometries of elite wheelchair racing athletes differ from the generic, able-bodied anthropometries commonly used in computational biomechanical simulations. The impact of using able-bodied parameters on the accuracy of simulations involving wheelchair racing is currently unknown. In this study, athlete-specific mass segment inertial parameters of the head and neck, torso, upper arm, forearm, hand, thigh, shank, and feet for five elite wheelchair athletes were calculated using dual-energy X-ray absorptiometry (DXA) scans. These were compared against commonly used anthropometrics parameters of data presented in the literature. A computational biomechanical simulation of wheelchair propulsion using the upper extremity dynamic model in opensim assessed the sensitivity of athlete-specific mass parameters using Kruskal-Wallis analysis and Spearman correlations. Substantial between-athlete body mass distribution variances (thigh mass between 7.8% and 22.4% total body mass) and between-limb asymmetries (<62.4% segment mass; 3.1 kg) were observed. Compared to nonathletic able-bodied anthropometric data, wheelchair racing athletes demonstrated greater mass in the upper extremities (up to 3.8% total body mass) and less in the lower extremities (up to 9.8% total body mass). Computational simulations were sensitive to individual body mass distribution, with joint torques increasing by up to 31.5% when the scaling of segment masses (measured or generic) differed by up to 2.3% total body mass. These data suggest that nonathletic, able-bodied mass segment inertial parameters are inappropriate for analyzing elite wheelchair racing motion.

Estimating the Maximum Isometric Force Generating Capacity of Wheelchair Racing Athletes for Simulation Purposes.

For the wheelchair racing population, it is uncertain whether musculoskeletal models using the maximum isometric force generating capacity of non-athletic, able-bodied individuals, are appropriate, as few anthropometric parameters for wheelchair athletes are reported in the literature. In this study, a sensitivity analysis was performed in OpenSim, whereby the maximum isometric force generating capacity of muscles was adjusted in 25% increments to literature defined values between scaling factors of 0.25x to 4.0x for two elite athletes, at three speeds representative of race conditions. Convergence of the solution was used to assess the results. Artificially weakening a model presented unrealistic values, and artificially strengthening a model excessively (4.0x) demonstrated physiologically invalid muscle force values. The ideal scaling factors were 1.5x and 1.75x for each of the athletes, respectively, as was assessed through convergence of the solution. This was similar to the relative difference in limb masses between dual energy X-Ray absorptiometry (DXA) data and anthropometric data in the literature (1.49x and 1.70x), suggesting that DXA may be used to estimate the required scaling factors. The reliability of simulations for elite wheelchair racing athletes can be improved by appropriately increasing the maximum isometric force generating capacity of muscles.

Changes in urinary risk profile after short-term low sodium and low calcium diet in recurrent Swiss kidney stone formers.

BACKGROUND: Kidney stone disease is common in industrialized countries. Recently, it has attracted growing attention, because of its significant association with adverse renal outcomes, including end stage renal disease. Calcium-containing kidney stones are frequent with high recurrence rates. While hypercalciuria is a well-known risk factor, restricted intake of animal protein and sodium, combined with normal dietary calcium, has been shown to be more effective in stone prevention compared with a low-calcium diet. Notably, the average sodium intake in Switzerland is twice as high as the WHO recommendation, while the intake of milk and dairy products is low. METHODS: We retrospectively analyzed Swiss recurrent kidney stone formers (rKSF) to test the impact of a low-sodium in combination with a low-calcium diet on the urinary risk profile. In patients with recurrent calcium oxalate containing stones, we investigated both, the consequence of a low-sodium diet on urinary volume and calcium excretion, and the influence of a low-sodium low-calcium diet on urinary oxalate excretion. RESULTS: Of the 169 patients with CaOx stones, 49 presented with hypercalciuria at baseline. The diet resulted in a highly significant reduction in 24-h urinary sodium and calcium excretion: from 201 ± 89 at baseline to 128 ± 88 mmol/d for sodium (p < 0.0001), and from 5.67 ± 3.01 to 4.06 ± 2.46 mmol/d (p < 0.0001) for calcium, respectively. Urine volume remained unchanged. Notably, no increase in oxalate excretion occurred on the restricted diet (0.39 ± 0.26 vs 0.39 ± 0.19 mmol/d, p = 0.277). Calculated Psf (probability of stone formation) values were only predictive for the risk of calcium phosphate stones. CONCLUSION: A diet low in sodium and calcium in recurrent calcium oxalate stone formers resulted in a significant reduction of urinary calcium excretion, but no change in urine volume. In this population with apparently low intake of dairy products, calcium restriction does not necessarily result in increased urinary oxalate excretion. However, based on previous studies, we recommend a normal dietary calcium intake to avoid a potential increase in urinary oxalate excretion and unfavorable effects on bone metabolism in hypercalciuric KSFs.

'Believe it or not': the medical framing of rectal foreign bodies.

Medical and lay attention to and intervention for rectal foreign bodies, the presence of an object in the rectum most often via insertion through the anus, has long been a source of humour and suspicion in both medical and public discourses. How do the ways medical providers write and talk to each other about rectal foreign bodies shape and reflect understandings of gender, sexuality and the (im)proper use of the anus and rectum? This paper examines the medical literature on rectal foreign bodies to shed light on the ways in which medical providers frame rectal foreign bodies. It develops a set of six frames that demonstrate how the medical literature on rectal foreign bodies (re)produces a variety of normative assumptions about and sociocultural values concerning bodies and sexuality, danger, shame, deception, mental illness and medical professionalism. It concludes with a discussion of how these framings of rectal foreign bodies might potentially contribute to the ongoing stigmatisation not only of rectal foreign body patients, but of non-heteronormative sexualities in general.

The Irrelevance Narrative: Queer (In)Visibility in Medical Education and Practice.

How might heteronormativity be reproduced and become internalized through biomedical practices? Based on in-depth, person-centered interviews, this article explores the ways heteronormativity works into medical education through the hidden curriculum. As experienced by my informants, case studies often reinforce unconscious heteronormative orientations and heterosexist/homophobic stereotypes about queer patients among straight and queer medical students alike. I introduce the concept of the irrelevance narrative to make sense of how queer medical students take up a heteronormative medical gaze. Despite recognizing that being queer affects how they interact with patients, my informants describe being queer as irrelevant to their delivery of care. I conclude with a discussion of how these preliminary findings can inform research on knowledge production in biomedical education and practice with an eye toward the tensions between personal and professional identity among biomedical practitioners.

Excitation of Bloch-like surface waves in quasi-crystals and aperiodic dielectric multilayers.

The existence of Bloch surface waves in periodic dielectric multilayer structures with a surface defect is well known. Not yet recognized is that quasi-crystals and aperiodic dielectric multilayers can also support Bloch-like surface waves. In this work, we numerically show the excitation of Bloch-like surface waves in Fibonacci quasi-crystals and Thue-Morse aperiodic dielectric multilayers using the prism coupling method. We report improved surface electric field intensity and penetration depth of Bloch-like surface waves in the air side in such structures compared to their periodic counterparts.

Effect of being overweight on urinary metabolic risk factors for kidney stone formation.

BACKGROUND: The prevalence and incidence of kidney stone disease have increased markedly during the past several decades, and studies have demonstrated that inappropriate dietary habits are leading to more obesity and overweight (OW) in children and adults, which may be important in stone formation. Obese and OW patients share most of the same risk factors for cardiovascular morbidity, while the impact of being OW, rather than obese, on urinary metabolic parameters of kidney stone formers (KSF) is less well known. The aims of this study were to investigate urinary metabolic parameters, stone composition and probability of stone formation (Psf) in OW KSF when compared with normal weight (NW) and obese KSF. METHODS: The kidney stone database for KSF attending a large metabolic stone clinic was investigated. Patients with a recorded BMI, confirmed diagnosis of kidney stone disease and full metabolic evaluation were divided into three categories: BMI ≤25.0 kg/m(2) (NW group), BMI 25-30 kg/m(2) (OW group) and BMI >30.0 kg/m(2) (obese group). Twenty-four hour urinary volume (U.Vol), pH (U.pH), calcium (U.Ca), oxalate (U.Ox), citrate (U.Cit), uric acid (U.UA), magnesium (U.Mg), sodium (U.Na) and potassium (U.K) excretions, along with stone composition and Psf, were then compared among the groups. RESULTS: A total of 2132 patients were studied, of whom 833 (39%) were NW, 863 (40.5%) were OW and 436 (20.5%) were obese. OW and obese KSF were older (mean age 43 ± 15 in NW, 48 ± 13 in OW and 50 ± 12 years in obese; P for trend <0.001), demonstrated increased female predominance and higher prevalence of diabetes, hypertension and gout. There were no statistically significant differences in U.Vol and U.Mg among the groups. However, significantly higher levels of U.Ca, U.Ox, U.Cit, by crude analysis, and U.UA (3.3 ± 1.1 versus 3.8 ± 1.2 versus 4.0 ± 1.2 mmol/L; P < 0.001 for trend), U.Na (151 ± 57 versus 165 ± 60 versus 184 ± 63 mmol/L; P < 0.001 for trend), and lower U.pH (6.3 ± 0.5 versus 6.1 ± 0.5 versus 6.0 ± 0.6; P < 0.001 for trend) by both crude and multivariate adjusted analysis models were demonstrated in OW and obese KSF. Stone composition data (N = 640) showed a significantly higher incidence of uric acid stones in OW and obese groups (P for trend < 0.001). In addition, higher Psf for CaOx, UA and CaOx/UA stone types were detected in OW and obese compared with NW KSF. CONCLUSIONS: Similar to obese KSF, OW KSF show clear alterations in metabolic urinary profiles that are associated with increased overall risk of stone formation. This greater risk is primarily due to raised U.UA and U.Na, lower U.pH and higher prevalence of hypercalciuria, along with unchanged levels of the commonly measured urinary lithogenesis inhibitors. Moreover, our study established a higher incidence of uric acid, but not calcium, stones in OW KSF. Thus, appropriate evaluation and follow-up may be warranted even in OW patients who are at risk of increased stone formation. Whether modest weight loss in OW KSF will have a favourable impact on their metabolic urinary profiles and thereby diminish the risk of further stone formation needs exploring.

Slow light by Bloch surface wave tunneling.

We demonstrate a slow light configuration that makes use of Bloch Surface Waves as an intermediate excitation in a double-prism tunneling configuration. This method is simple compared to the more usual technique for slowing light using the phenomenon of electromagnetically induced transparency in atomic gases or doped ionic crystals operated at temperatures below 4 K. Using a semi-numerical approach, we show that a 1D photonic crystal, a multilayer structure composed of alternating layers of TiO(2) and SiO(2), can be used to slow down light by a factor of up to 400. The results also show that better control of the speed of light can be achieved by changing the number of bilayers and the air-gap thickness appropriately.

The use of a mono-fluted reamer results in decreased enlargement of the tibial tunnel when using a transtibial ACL reconstruction technique.

PURPOSE: To evaluate whether femoral tunnel preparation using a mono-fluted reamer rather than an acorn reamer would result in less tibial tunnel deformation when using a transtibial technique for anterior cruciate ligament reconstruction. METHODS: Tibial and femoral tunnel preparation was performed in four matched pairs of cadaveric knees. The tibial tunnel was drilled using a standard acorn reamer. The femoral tunnel was prepared using a transtibial technique with a mono-fluted reamer, and then, the same femoral tunnel was re-reamed using an acorn reamer. The anterior-posterior (AP) and medial-lateral (ML) dimensions of the tibial tunnel were recorded after each reamer. We then compared the measurements following the use of each reamer using a paired two-sample t test. RESULTS: There was a significantly larger degree of tibial tunnel deformation following femoral tunnel preparation with the acorn reamer when compared with the mono-fluted reamer. The initial tibial tunnel measured 10.5 and 10.1 mm in the AP and ML dimensions, respectively. The resultant AP diameter of the tibial tunnel after femoral reaming was 16.7 mm (p < 0.001) for the acorn reamer compared with 11.6 mm (p < 0.001) for the mono-fluted reamer. The ML diameters were 11.3 mm (p = 0.003) versus 10.2 mm (p = 0.07) for the acorn and mono-fluted reamer, respectively. CONCLUSION: The use of a mono-fluted reamer for femoral tunnel preparation results in less tibial tunnel deformation during transtibial reaming.

Matrix-induced autologous chondrocyte implantation (MACI) for chondral defects in the patellofemoral joint.

PURPOSE: Both autologous chondrocyte implantation (ACI) and tibial tubercle transfer (TTT) have been used to treat chondral defects in the patellofemoral joint resulting in clinical improvement. Our study investigates the magnetic resonance imaging (MRI) appearance of the matrix-induced autologous chondrocyte implantation (MACI) graft at 5-year follow-up to determine if it provides a durable treatment option in patients with an average age of 42 (standard deviation 11.6). METHODS: Twenty-three patients were available for follow-up. Nine patients required realignment of the extensor mechanism with lateral release and TTT. The MRI magnetic resonance observation of cartilage repair tissue (MOCART) scoring system was used to assess the graft status. Clinical outcomes were assessed at these time periods. RESULTS: The mean weighted MOCART composite score improved from 2.87 at 3 months to 3.39 at 5 years, indicating an intact appearance in most grafts. Graft height measured >50% of the adjacent native cartilage in 82% of patients. Clinical improvement assessed by the Knee Injury and Osteoarthritis Outcome Score, SF-36 (PCS) and the 6-minute walk test was demonstrated between pre-operative scores and final 5-year follow-up. 91% of patients would undergo MACI again. Correlation between MOCART and clinical scores were low in MACI to the patellofemoral joint. No significant difference was found in outcome between those that required realignment surgery compared with those that did not. CONCLUSION: Patellofemoral MACI provides a durable graft on MRI assessment at 5 years with resultant clinical improvement. Further work is needed to determine which defect locations may benefit most from this procedure. LEVEL OF EVIDENCE: IV.

Use of the probability of stone formation (PSF) score to assess stone forming risk and treatment response in a cohort of Brazilian stone formers.

INTRODUCTION: The aim was to confirm that PSF (probability of stone formation) changed appropriately following medical therapy on recurrent stone formers. MATERIALS AND METHODS: Data were collected on 26 Brazilian stone-formers. A baseline 24-hour urine collection was performed prior to treatment. Details of the medical treatment initiated for stone-disease were recorded. A PSF calculation was performed on the 24 hour urine sample using the 7 urinary parameters required: voided volume, oxalate, calcium, urate, pH, citrate and magnesium. A repeat 24-hour urine sample was performed for PSF calculation after treatment. Comparison was made between the PSF scores before and during treatment. RESULTS: At baseline, 20 of the 26 patients (77%) had a high PSF score (> 0.5). Of the 26 patients, 17 (65%) showed an overall reduction in their PSF profiles with a medical treatment regimen. Eleven patients (42%) changed from a high risk (PSF > 0.5) to a low risk (PSF < 0.5) and 6 patients reduced their risk score but did not change risk category. Six (23%) patients remained in a high risk category (> 0.5) during both assessments. CONCLUSIONS: The PSF score reduced following medical treatment in the majority of patients in this cohort.

Effect of Soccer Boot Outsole Configuration on Translational Traction Across Both Natural and Artificial Playing Surfaces.

Background: Soccer boots are produced with different stud patterns and configurations to provide players with extra traction on specific surface types to minimize slipping and improve player performance. Excessive traction, however, can lead to foot fixation injuries, particularly anterior cruciate ligament tears. Purpose/Hypothesis: The purpose of this study was to explore the translational traction properties of 5 different outsole configurations moving in 4 different directions across both natural grass and artificial grass (AG) playing surfaces. It was hypothesized that longer studs or studs with an asymmetric shape would yield a higher traction coefficient compared with the recommended stud configuration for the given playing surface. Study Design: Descriptive laboratory study. Methods: A custom-built testing apparatus recorded the translational traction of 5 different soccer boots moving in an anterior, posterior, medial, or lateral direction on both natural grass and AG playing surfaces. A 3-way analysis of variance was performed to determine the effect of outsole configuration on the traction, and a post hoc Tukey analysis was performed to compare different outsole configurations with a control. Results: For the natural grass playing surface, the longer and asymmetric studs yielded a significantly higher (P < .05) traction coefficient on 75% of loading scenarios, while on AG, they yielded a significantly higher traction on 50% of loading scenarios. Conclusion: Some soccer boots yielded higher traction values compared with the recommended configuration. Clinical Relevance: The results highlight the importance of boot selection on different playing surfaces. Higher traction values could increase the injury risk for players due to excessive traction and foot fixation.

Neck stiffness and range of motion for young males and females.

Well characterised mechanical response of the normal head-neck complex during passive motion is important to inform and verify physical surrogate and computational models of the human neck, and to inform normal baseline for clinical assessments. For 10 male and 10 female participants aged 20 to 29, the range of motion (ROM) of the neck about three anatomical axes was evaluated in active-seated, passive-lying and active-lying configurations, and the neck stiffness was evaluated in passive-lying. Electromyographic signals from the agonist muscles, normalised to maximum voluntary contractions, were used to provide feedback during passive motions. The effect of sex and configuration on ROM, and the effect of sex on linear estimates of stiffness in three regions of the moment-angle curve, were assessed with linear mixed models and generalised linear models. There were no differences in male and female ROM across all motion directions and configurations. Flexion and axial rotation ROM were configuration dependent. The passive-lying moment-angle relationship was typically non-linear, with higher stiffness (slope) closer to end of ROM. When normalising the passive moment-angle curve to active lying ROM, passive stiffness was sex dependent only for lateral bending region 1 and 2. Aggregate moment-angle corridors were similar for males and females in flexion and extension, but exhibited a higher degree of variation in applied moment for males in lateral bending and axial rotation. These data provide the passive response of the neck to low rate bending and axial rotation angular displacement, which may be useful for computational and surrogate modelling of the human neck.

Evaluation of Apparatus and Protocols to Measure Human Passive Neck Stiffness and Range of Motion.

Understanding of human neck stiffness and range of motion (ROM) with minimal neck muscle activation ("passive") is important for clinical and bioengineering applications. The aim of this study was to develop, implement, and evaluate the reliability of methods for assessing passive-lying stiffness and ROM, in six head-neck rotation directions. Six participants completed two assessment sessions. To perform passive-lying tests, the participant's head and torso were strapped to a bending (flexion, extension, lateral bending) or a rotation (axial rotation) apparatus, and clinical bed, respectively. The head and neck were manually rotated by the researcher to the participant's maximum ROM, to assess passive-lying stiffness. Participant-initiated ("active") head ROM was also assessed in the apparatus, and seated. Various measures of apparatus functionality were assessed. ROM was similar for all assessment configurations in each motion direction except flexion. In each direction, passive stiffness generally increased throughout neck rotation. Within-session reliability for stiffness (ICC > 0.656) and ROM (ICC > 0.872) was acceptable, but between-session reliability was low for some motion directions, probably due to intrinsic participant factors, participant-apparatus interaction, and the relatively low participant number. Moment-angle corridors from both assessment sessions were similar, suggesting that with greater sample size, these methods may be suitable for estimating population-level corridors.