High Molecular Weight Mixed-Linkage Glucan as a Mechanical and Hydration Modulator of Bacterial Cellulose: Characterization by Advanced NMR Spectroscopy.

Bacterial cellulose (BC) consists of a complex three-dimensional organization of ultrafine fibers which provide unique material properties such as softness, biocompatibility, and water-retention ability, of key importance for biomedical applications. However, there is a poor understanding of the molecular features modulating the macroscopic properties of BC gels. We have examined chemically pure BC hydrogels and composites with arabinoxylan (BC-AX), xyloglucan (BC-XG), and high molecular weight mixed-linkage glucan (BC-MLG). Atomic force microscopy showed that MLG greatly reduced the mechanical stiffness of BC gels, while XG and AX did not exert a significant effect. A combination of advanced solid-state NMR methods allowed us to characterize the structure of BC ribbons at ultra-high resolution and to monitor local mobility and water interactions. This has enabled us to unravel the effect of AX, XG, and MLG on the short-range order, mobility, and hydration of BC fibers. Results show that BC-XG hydrogels present BC fibrils of increased surface area, which allows BC-XG gels to hold higher amounts of bound water. We report for the first time that the presence of high molecular weight MLG reduces the density of clusters of BC fibrils and dramatically increases water interactions with BC. Our data supports two key molecular features determining the reduced stiffness of BC-MLG hydrogels, that is, (i) the adsorption of MLG on the surface of BC fibrils precluding the formation of a dense network and (ii) the preorganization of bound water by MLG. Hence, we have produced and fully characterized BC-MLG hydrogels with novel properties which could be potentially employed as renewable materials for applications requiring high water retention capacity (e.g. personal hygiene products).

Supramolecular Amino Acid Based Hydrogels: Probing the Contribution of Additive Molecules using NMR Spectroscopy.

Supramolecular hydrogels are composed of self-assembled solid networks that restrict the flow of water. l-Phenylalanine is the smallest molecule reported to date to form gel networks in water, and it is of particular interest due to its crystalline gel state. Single and multi-component hydrogels of l-phenylalanine are used herein as model materials to develop an NMR-based analytical approach to gain insight into the mechanisms of supramolecular gelation. Structure and composition of the gel fibres were probed using PXRD, solid-state NMR experiments and microscopic techniques. Solution-state NMR studies probed the properties of free gelator molecules in an equilibrium with bound molecules. The dynamics of exchange at the gel/solution interfaces was investigated further using high-resolution magic angle spinning (HR-MAS) and saturation transfer difference (STD) NMR experiments. This approach allowed the identification of which additive molecules contributed in modifying the material properties.

Sliding Contact Dynamic Force Spectroscopy Method for Interrogating Slowly Forming Polymer Cross-Links.

Dynamic single-molecule force spectroscopy (SMFS), conducted most commonly using AFM, has become a widespread and valuable tool for understanding the kinetics and thermodynamics of fundamental molecular processes such as ligand-receptor interactions and protein unfolding. Where slowly forming bonds are responsible for the primary characteristics of a material, as is the case in cross-links in some polymer gels, care must be taken to ensure that a fully equilibrated bond has first formed before its rupture can be interpreted. Here we introduce a method, sliding contact force spectroscopy (SCFS), that effectively eliminates the kinetics of bond formation from the measurement of bond rupture. In addition, it permits bond rupture measurements in systems where one of the binding partners may be introduced into solution prior to binding without tethering to a surface. Taking as an example of a slowly forming bond, the "eggbox" junction cross-links between oligoguluronic acid chains (oligoGs) in the commercially important polysaccharide alginate, we show that SCFS accurately measures the equilibrated bond strength of the cross-link when one chain is introduced into the sample solution without tethering to a surface. The results validate the SCFS technique for performing single-molecule force spectroscopy experiments and show that it has advantages in cases where the bond to be studied forms slowly and where tethering of one of the binding partners is impractical.

Mechanistic and Kinetic Insight into Spontaneous Cocrystallization of Isoniazid and Benzoic Acid.

Solid-state cocrystallization is of contemporary interest because it offers an easy and efficient way to produce cocrystals, which are recognized as prospective pharmaceutical materials. Research explaining solid-state cocrystallization mechanisms is important but still too scarce to give a broad understanding of factors governing and limiting these reactions. Here we report an investigation of the mechanism and kinetics of isoniazid cocrystallization with benzoic acid. This reaction is spontaneous; however, its rate is greatly influenced by environmental conditions (humidity and temperature) and pretreatment (milling) of the sample. The acceleration of cocrystallization in the presence of moisture is demonstrated by kinetic studies at elevated humidity. The rate dependence on humidity stems from moisture facilitated rearrangements on the surface of isoniazid crystallites, which lead to cocrystallization in the presence of benzoic acid vapor. Furthermore, premilling the mixture of the cocrystal ingredients eliminated the induction time of the reaction and considerably increased its rate.

Non-covalent duplex to duplex crosslinking of DNA in solution revealed by single molecule force spectroscopy.

Small molecules that interact with DNA, disrupting the binding of transcription factors or crosslinking DNA into larger structures, have significant potential as cancer therapies and in nanotechnology. Bisintercalators, including natural products such as echinomycin and rationally designed molecules such as the bis-9-aminoacridine-4-carboxamides, are key examples. There is little knowledge of the propensity of these molecules to crosslink duplex DNA. Here we use single molecule force spectroscopy to assay the crosslinking capabilities of bisintercalators. We show that bis-9-aminoacridine-4-carboxamides with both rigid and flexible linkers are able to crosslink duplex strands of DNA, and estimate the equilibrium free energy of a 9-aminoacridine-4-carboxamide bisintercalator from DNA at 5.03 kJ mol(-1). Unexpectedly, we find that echinomycin and its synthetic analogue TANDEM are capable of sequence-specific crosslinking of the terminal base pairs of two duplex DNA strands. In the crowded environment of the nucleosome, small molecules that crosslink neighbouring DNA strands may be expected to have significant effects on transcription, while a small molecule that facilitates sequence-specific blunt-end ligation of DNA may find applications in the developing field of DNA nanotechnology.

Lamellar structures of MUC2-rich mucin: a potential role in governing the barrier and lubricating functions of intestinal mucus.

Mucus is a ubiquitous feature of mammalian wet epithelial surfaces, where it lubricates and forms a selective barrier that excludes a range of particulates, including pathogens, while hosting a diverse commensal microflora. The major polymeric component of mucus is mucin, a large glycoprotein formed by several MUC gene products, with MUC2 expression dominating intestinal mucus. A satisfactory answer to the question of how these molecules build a dynamic structure capable of playing such a complex role has yet to be found, as recent reports of distinct layers of chemically identical mucin in the colon and anomalously rapid transport of nanoparticles through mucus have emphasized. Here we use atomic force microscopy (AFM) to image a MUC2-rich mucus fraction isolated from pig jejunum. In the freshly isolated mucin fraction, we find direct evidence for trigonally linked structures, and their assembly into lamellar networks with a distribution of pore sizes from 20 to 200 nm. The networks are two-dimensional, with little interaction between lamellae. The existence of persistent cross-links between individual mucin polypeptides is consistent with a non-self-interacting lamellar model for intestinal mucus structure, rather than a physically entangled polymer network. We only observe collapsed entangled structures in purified mucin that has been stored in nonphysiological conditions.

The development of thermal nanoprobe methods as a means of characterizing and mapping plasticizer incorporation into ethylcellulose films.

PURPOSE: The phase composition and distribution of ethylcellulose (EC) films containing varying amounts of the plasticizer fractionated coconut oil (FCO) were studied using a novel combination of thermal and mapping approaches. METHODS: The thermal and thermomechanical properties of films containing up to 30% FCO were characterized using modulated temperature differential scanning calorimetry (MTDSC) and dynamic mechanical analysis (DMA). Film surfaces were mapped using atomic force microscopy (AFM; topographic and pulsed force modes) and the composition of specific regions identified using nanothermal probes. RESULTS: Clear evidence of distinct conjugate phases was obtained for the 20-30% FCO/EC film systems. We suggest a model whereby the composition of the distinct phases may be estimated via consideration of the glass transition temperatures observed using DSC and DMA. By combining pulsed force AFM and nano-thermal analysis we demonstrate that it is possible to map the two separated phases. In particular, the use of thermal probes allowed identification of the distinct regions via localized thermomechanical analysis, whereby nanoscale probe penetration is measured as a function of temperature. CONCLUSION: The study has indicated that by using thermal and imaging techniques in conjunction it is possible to both identify and map distinct regions in binary films.

Polymer sequencing by molecular machines: a framework for predicting the resolving power of a sliding contact force spectroscopy sequencing method.

We evaluate an AFM-based single molecule force spectroscopy method for mapping sequences in otherwise difficult to sequence heteropolymers, including glycosylated proteins and glycans. The sliding contact force spectroscopy (SCFS) method exploits a sliding contact made between a nanopore threaded over a polymer axle and an AFM probe. We find that for sliding α- and ß-cyclodextrin nanopores over a wide range of hydrophilic monomers, the free energy of sliding is proportional to the sum of two dimensionless, easily calculable parameters representing the relative partitioning of the monomer inside the nanopore or in the aqueous phase, and the friction arising from sliding the nanopore over the monomer. Using this relationship we calculate sliding energies for nucleic acids, amino acids, glycan and synthetic monomers and predict on the basis of these calculations that SCFS will detect N- and O-glycosylation of proteins and patterns of sidechains in glycans. For these applications, SCFS offers an alternative to sequence mapping by mass spectrometry or newly-emerging nanopore technologies that may be easily implemented using a standard AFM.

Single molecule investigation of the onset and minimum size of the calcium-mediated junction zone in alginate.

One of the principal roles of alginate, both natively and in commercial applications, is gelation via Ca(2+)-mediated crosslinks between blocks of guluronic acid. In this work, single molecule measurements were carried out between well-characterised series of nearly monodisperse guluronic acid blocks ('oligoGs') using dynamic force spectroscopy. The measurements provide evidence that for interaction times on the order of tens of milliseconds the maximum crosslink strength is achieved by pairs of oligoGs long enough to allow the coordination of 4Ca(2+) ions, with both shorter and longer oligomers forming weaker links. Extending the interaction time from tens to hundreds of milliseconds allows longer oligoGs to achieve much stronger crosslinks but does not change the strength of individual links between shorter oligoGs. These results are considered in light of extant models for the onset of cooperative crosslinking in polyelectrolytes and an anisotropic distribution of oligoGs on interacting surfaces and provide a timescale for the formation and relaxation of alginate gels at the single crosslink level.

A rapid screen for molecules that form duplex to duplex crosslinks in DNA.

We describe a gold nanoparticle based assay that can rapidly determine the crosslinking of DNA duplexes by ligands. Such compounds have potential in targeting highly compacted DNA such as that found in the nucleosome.

A new view of pectin structure revealed by acid hydrolysis and atomic force microscopy.

Individual pectin polymers and complexes, isolated from the pericarp of unripe tomato (Lycopersicon esculentum var. Rutgers), were subjected to a mild acid hydrolysis and visualised and characterised by atomic force microscopy (AFM). The AFM images confirm earlier studies showing that individual pectic polysaccharides often possess long branches. The AFM data have been used to construct size and molecular weight distributions for the single molecules and complexes, from which the calculated number-average and weight-average molecular weights can then be compared directly with the published literature data on the rheology of bulk samples. Loss of the neutral sugars arabinose, galactose and rhamnose from the pectin samples does not significantly alter either the size or the branching density of the individual polymers, but is reflected in a breakdown of the complexes. Significant loss of galacturonic acid at long hydrolysis times was found to be accompanied by changes in the size and branching of the single polymers and further breakdown of the complexes. The results suggest that rhamnose, arabinose and galactose are not the major components of the individual polymers but are, instead, confined to the complexes. The polysaccharides represent a previously unrecognised branched homogalacturonan with a minimum mean size some three times larger than that previously reported. The complexes consist of homogalacturonans (HGs) held together by rhamnogalacturonan I (RG-I) regions. Comparison of the rate of depolymerisation of the homogalacturonans and complexes with the published data on changes in the intrinsic viscosity of bulk pectin samples, subjected to similar acid hydrolysis, suggests that the different rates of depolymerisation of RG-I and HG contribute separately to the observed changes in intrinsic viscosity during acid hydrolysis. Thus data obtained using a single molecule microscopy technique provides new insights into the behaviour in the bulk.

Mapping the positions of beads on a string: dethreading rotaxanes by molecular force spectroscopy.

The direct manipulation by atomic force microscopy (AFM) of individual macrocycles within a rotaxane offers a potential route to a new sequencing tool for complex macromolecules such as polysaccharides, glycoproteins and nucleic acids. In this paper we demonstrate for the first time that a sliding contact made between a macrocycle, α-cyclodextrin, and its polymer axle by an AFM tip can be used to map the positions of specific groups along the polymer as if they were beads along a string, thereby generating sequence information. We find very good agreement (linear fit with slope = 1.03, R(2) = 0.968) between the calculated and measured positions of phenylenediamine and benzenetricarboxylic acid groups within polymers of polyethylene oxide (PEO). The rupture force profiles attributable to the dethreading interactions of phenylenediamine and benzenetricarboxylic acid differ observably from each other and, in the latter case, from the rupture of the corresponding host-guest complex. As well as opening the way to a macromolecular sequencing technique, the ability demonstrated by this method to manipulate the dethreading of a rotaxane offers a new tool for investigating the process energetics in a wide array of spontaneously forming and forced rotaxane systems.

The isolated MUC5AC gene product from human ocular mucin displays intramolecular conformational heterogeneity.

Atomic force microscopy (AFM) has been used to show that human ocular mucins contain at least three distinct polymer conformations, separable by isopycnic density gradient centrifugation. In this work we have used affinity purification against the anti(mucin peptide core) monoclonal antibody 45M1 to isolate MUC5AC gene products, a major component of human ocular mucins. AFM images confirm that the affinity-purified polymers adopt distinct conformations that coidentify with two of those observed in the parent population, and further reveal that these two different conformations can be present within the same polymer. AFM images of the complexes formed after incubation of 45M1 with the parent sample reveal different rates of binding to the two MUC5AC polymer types. The variability of gene products within a mucin population was revealed by analyzing the height distributions along the polymer contour and periodicities in distances between occupied antibody binding sites. AFM analysis of mucin polymers at the single molecule level provides new information about the genetic origins of individual polymers and the contributions of glycosylation to the physicochemical properties of mucins, which can be correlated with information obtained from biochemistry, antibody binding assays, and molecular biology techniques.

Glycopolymer charge density determines conformation in human ocular mucin gene products: an atomic force microscope study.

Atomic force microscopy (AFM) has been applied to the study of heterogeneity in the structure and function of individual biopolymers with complex structures such as glycoproteins, polysaccharides and nucleic acids. In this work we describe experiments which shed light on the heterogeneity of human ocular mucin gene products. By separating samples of native human ocular mucins on a caesium chloride density gradient, at least three populations consisting predominantly of products of the gene MUC5AC can be identified. Separation on the caesium chloride density gradient is governed by molecular architecture and charge density, and thus provides a route to the discrimination between different glycoforms within a glycoprotein sample. AFM images of these populations show that each is characterised by different conformational properties and polymer diameters, both of which can be attributed to differences in the degree and nature of glycosylation. These differences in glycosylation are likely to be the result of post-translational processing and may also have functional consequences. The AFM's ability to examine the composition of a predominantly single gene product population at the level of the single molecule allows the consequences of post-translational process heterogeneity to be examined at high resolution.