Nanoscale surface potential variation correlates with local S/Se ratio in solution-processed CZTSSe solar cells.

Thin film solar cells made from Cu, Zn, Sn, and S/Se can be processed from solution to yield high-performing kesterite (CZTS or CZTSSe) photovoltaics. We present a microstructural study of solution-deposited CZTSSe films prepared by nanocrystal-based ink approaches using scanning probe microscopy (SPM) and scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS). We correlate scanning Kelvin probe microscopy (SKPM) maps of local surface potential with SEM/EDS images of the exact same regions of the film, allowing us to relate observed variations in surface potential to local variations in stoichiometry. Specifically, we find a correlation between surface potential and the S/(S + Se) composition ratio. In particular, we find that regions with high S/(S + Se) ratios are often associated with regions of more negative surface potential and thus higher work function. The change in work function is larger than the expected change in the valence band position with these small changes in sulfur, and thus the data suggest an increase in acceptor-like defects with increasing sulfur. These findings provide new experimental insight into the microscopic relationships between composition, structure, and electronic properties in these promising photovoltaic materials.

Adjusting the energy of interfacial states in organic photovoltaics for maximum efficiency.

A critical bottleneck for improving the performance of organic solar cells (OSC) is minimising non-radiative losses in the interfacial charge-transfer (CT) state via the formation of hybrid energetic states. This requires small energetic offsets often detrimental for high external quantum efficiency (EQE). Here, we obtain OSC with both non-radiative voltage losses (0.24 V) and photocurrent losses (EQE > 80%) simultaneously minimised. The interfacial CT states separate into free carriers with ≈40-ps time constant. We combine device and spectroscopic data to model the thermodynamics of charge separation and extraction, revealing that the relatively high performance of the devices arises from an optimal adjustment of the CT state energy, which determines how the available overall driving force is efficiently used to maximize both exciton splitting and charge separation. The model proposed is universal for donor:acceptor (D:A) with low driving forces and predicts which D:A will benefit from a morphology optimization for highly efficient OSC.

Cyclotron Splittings in the Plasmon Resonances of Electronically Doped Semiconductor Nanocrystals Probed by Magnetic Circular Dichroism Spectroscopy.

A fundamental understanding of the rich electronic structures of electronically doped semiconductor nanocrystals is vital for assessing the utility of these materials for future applications from solar cells to redox catalysis. Here, we examine the use of magnetic circular dichroism (MCD) spectroscopy to probe the infrared localized surface plasmon resonances of p-Cu2-xSe, n-ZnO, and tin-doped In2O3 (n-ITO) nanocrystals. We demonstrate that the MCD spectra of these nanocrystals can be analyzed by invoking classical cyclotron motions of their excess charge carriers, with experimental MCD signs conveying the carrier types (n or p) and experimental MCD intensities conveying the cyclotron splitting magnitudes. The experimental cyclotron splittings can then be used to quantify carrier effective masses (m*), with results that agree with bulk in most cases. MCD spectroscopy thus offers a unique measure of m* in free-standing colloidal semiconductor nanocrystals, raising new opportunities to investigate the influence of various other synthetic or environmental parameters on this fundamentally important electronic property.

Electrical Detection of Quantum Dot Hot Electrons Generated via a Mn2+-Enhanced Auger Process.

An all-solid-state quantum-dot-based photon-to-current conversion device is demonstrated that selectively detects the generation of hot electrons. Photoexcitation of Mn2+-doped CdS quantum dots embedded in the device is followed by efficient picosecond energy transfer to Mn2+ with a long-lived (millisecond) excited-state lifetime. Electrons injected into the QDs under applied bias then capture this energy via Auger de-excitation, generating hot electrons that possess sufficient energy to escape over a ZnS blocking layer, thereby producing current. This electrically detected hot-electron generation is correlated with a quench in the steady-state Mn2+ luminescence and the introduction of a new nonradiative excited-state decay process, consistent with electron-dopant Auger cross-relaxation. The device's efficiency at detecting hot-electron generation provides a model platform for the study of hot-electron ionization relevant to the development of novel photodetectors and alternative energy-conversion devices.

Suppression of Thermally Induced Fullerene Aggregation in Polyfullerene-Based Multiacceptor Organic Solar Cells.

A novel main-chain polyfullerene, poly[fullerene-alt-2,5-bis(octyloxy)terephthalaldehyde] (PPC4), is investigated for its hypothesized superior morphological stability as an electron-accepting material in organic photovoltaics relative to the widely used fullerene phenyl-C61-butyric acid methyl ester (PCBM). When mixed with poly(3-hexylthiophene-2,5-diyl) (P3HT), PPC4 affords low-charge-generation yields because of poor intermixing within the blend. The adoption of a multiacceptor system, by introducing PCBM into the P3HT:polyfullerene blend, was found to lead to a 3-fold enhancement in charge generation, affording power conversion efficiencies very close to that of the prototypical P3HT:PCBM binary control. Upon thermal stressing and in contrast to the P3HT:PCBM binary, photovoltaic devices based on the multiacceptor system demonstrated significantly improved stability, outperforming the control because of suppression of the PCBM migration and aggregation processes responsible for rapid device failure. We rationalize the influence of the fullerene miscibility and its implications on the device performance in terms of a thermodynamic model based on Flory-Huggins solution theory. Finally, the potential universal applicability of this approach for thermal stabilization of organic solar cells is demonstrated, utilizing an alternative low-band-gap polymer-donor system.

Combined Computational Approach Based on Density Functional Theory and Artificial Neural Networks for Predicting The Solubility Parameters of Fullerenes.

The solubility of organic semiconductors in environmentally benign solvents is an important prerequisite for the widespread adoption of organic electronic appliances. Solubility can be determined by considering the cohesive forces in a liquid via Hansen solubility parameters (HSP). We report a numerical approach to determine the HSP of fullerenes using a mathematical tool based on artificial neural networks (ANN). ANN transforms the molecular surface charge density distribution (σ-profile) as determined by density functional theory (DFT) calculations within the framework of a continuum solvation model into solubility parameters. We validate our model with experimentally determined HSP of the fullerenes C60, PC61BM, bisPC61BM, ICMA, ICBA, and PC71BM and through comparison with previously reported molecular dynamics calculations. Most excitingly, the ANN is able to correctly predict the dispersive contributions to the solubility parameters of the fullerenes although no explicit information on the van der Waals forces is present in the σ-profile. The presented theoretical DFT calculation in combination with the ANN mathematical tool can be easily extended to other π-conjugated, electronic material classes and offers a fast and reliable toolbox for future pathways that may include the design of green ink formulations for solution-processed optoelectronic devices.

Low-Temperature Solution-Processed Kesterite Solar Cell Based on in Situ Deposition of Ultrathin Absorber Layer.

The production of high-performance, solution-processed kesterite Cu2ZnSn(Sx,Se1-x)4 (CZTSSe) solar cells typically relies on high-temperature crystallization processes in chalcogen-containing atmosphere and often on the use of environmentally harmful solvents, which could hinder the widespread adoption of this technology. We report a method for processing selenium free Cu2ZnSnS4 (CZTS) solar cells based on a short annealing step at temperatures as low as 350 °C using a molecular based precursor, fully avoiding highly toxic solvents and high-temperature sulfurization. We show that a simple device structure consisting of ITO/CZTS/CdS/Al and comprising an extremely thin absorber layer (∼110 nm) achieves a current density of 8.6 mA/cm(2). Over the course of 400 days under ambient conditions encapsulated devices retain close to 100% of their original efficiency. Using impedance spectroscopy and photoinduced charge carrier extraction by linearly increasing voltage (photo-CELIV), we demonstrate that reduced charge carrier mobility is one limiting parameter of low-temperature CZTS photovoltaics. These results may inform less energy demanding strategies for the production of CZTS optoelectronic layers compatible with large-scale processing techniques.

Electron accumulation on metal nanoparticles in plasmon-enhanced organic solar cells.

Plasmonic metal nanoparticles have been used to enhance the performance of thin-film devices such as organic photovoltaics based on polymer/fullerene blends. We show that silver nanoprisms accumulate long-lived negative charges when they are in contact with a photoexcited bulk heterojunction blend composed of poly(3-hexylthiophene)/phenyl-C61-butyric acid methyl ester (P3HT/PCBM). We report both the charge modulation and electroabsorption spectra of silver nanoprisms in solid-state devices and compare these spectra with the photoinduced absorption spectra of P3HT/PCBM blends containing silver nanoprisms. We assign a previously unidentified peak in the photoinduced absorption spectra to the presence of photoinduced electrons on the silver nanoprisms. We show that coating the nanoprisms with a 2.5 nm thick insulating layer can completely inhibit this charging. These results may inform methods for limiting metal-mediated losses in plasmonic solar cells.