Triiron Complexes Featuring Azadiphosphine Related to the Active Site of [FeFe]-Hydrogenases: Their Redox Behavior and Protonation.

The design of iron clusters featuring a bimetallic core and several protonation sites in the second coordination sphere of the metal centers is important for modeling the activity of polymetallic active sites such as the H-cluster of [FeFe]-hydrogenases. For this purpose, the syntheses of complexes [Fe3(CO)5(κ2-PPh2NR2)(µ-pdt)2] (R = Ph (1), Bn (2)) and [Fe3(CO)5(κ2-PPh2NR2)(µ-adtBn)(µ-pdt)] (R = Ph (3), Bn (4)) were carried out by reacting hexacarbonyl precursors [Fe2(CO)6(µ-xdt)] (xdt = pdt (propanedithiolate), adtBn (azadithiolate) with mononuclear complexes [Fe(κ2-pdt)(CO)2(κ2-PPh2NR2)] (PPh2NR2 = (PPhCH2NRCH2)2, R = Ph, Bn) in order to introduce amine functions, through well-known PPh2NR2 diphosphine, into the vicinity of the triiron core. The investigation of the reactivity of these triiron species towards the proton (in the presence of CF3SO3H) and the influence of the pendant amines on the redox properties of these complexes were explored using spectroscopic and electrochemical methods. The protonation sites in such triiron clusters and their relationships were identified. The orientation of the first and second protonation processes depends on the arrangement of the second coordination sphere. The similarities and differences, due to the extended metal nuclearity, with their dinuclear counterparts [Fe2(CO)4(κ2-PPh2NR2)(µ-pdt)], were highlighted.

Normal vs. Inverted Ordering of Reduction Potentials in [FeFe]-Hydrogenases Biomimetics: Effect of the Dithiolate Bulk.

Three hexacarbonyl diiron dithiolate complexes [Fe2 (CO)6 (µ-(SCH2 )2 X)] with different substituted bridgeheads (X=CH2 , CEt2 , CBn2 (Bn=CH2 C6 H5 )), have been studied under the same experimental conditions by cyclic voltammetry in dichloromethane [NBu4 ][PF6 ] 0.2 M. DFT calculations were performed to rationalize the mechanism of reduction of these compounds. The three complexes undergo a two-electron transfer whose the mechanism depends on the bulkiness of the dithiolate bridge, which involves a different timing of the structural changes (Fe-S bond cleavage, inversion of conformation and CO bridging) vs redox steps. The introduction of a bulky group in the dithiolate linker has obviously an effect on normally ordered (as for propanedithiolate (pdt)) or inverted (pdtEt2 , pdtBn2 ) reduction potentials. Et→Bn replacement is not theoretically predicted to alter the geometry and energy of the most stable mono-reduced and bi-reduced forms but such a replacement alters the kinetics of the electron transfer vs the structural changes.

C-Cl Bond Activation at Rotated vs Unrotated Dinuclear Site Related to [FeFe]-Hydrogenases.

The novel dinuclear complex related to the [FeFe]-hydrogenases active site, [Fe2(µ-pdt)(κ2-dmpe)2(CO)2] (1), is highly reactive toward chlorinated compounds CHxCl4-x (x = 1, 2) affording selectively terminal or bridging chloro diiron isomers through a C-Cl bond activation. DFT calculations suggest a cooperative mechanism involving a formal concerted regioselective chloronium transfer depending on the unrotated or rotated conformation of two isomers of 1.

Insights into Triazolylidene Ligands Behaviour at a Di-Iron Site Related to [FeFe]-Hydrogenases.

The behaviour of triazolylidene ligands coordinated at a {Fe2(CO)5(µ-dithiolate)} core related to the active site of [FeFe]-hydrogenases have been considered to determine whether such carbenes may act as redox electron-reservoirs, with innocent or non-innocent properties. A novel complex featuring a mesoionic carbene (MIC) [Fe2(CO)5(Pmpt)(µ-pdt)] (1; Pmpt = 1-phenyl-3-methyl-4-phenyl-1,2,3-triazol-5-ylidene; pdt = propanedithiolate) was synthesized and characterized by IR, 1H, 13C{1H} NMR spectroscopies, elemental analyses, X-ray diffraction ,and cyclic voltammetry. Comparison with the spectroscopic characteristics of its analogue [Fe2(CO)5(Pmbt)(µ-pdt)] (2; Pmbt = 1-phenyl-3-methyl-4-butyl-1,2,3-triazol-5-ylidene) showed the effect of the replacement of a n-butyl by a phenyl group in the 1,2,3-triazole heterocycle. A DFT study was performed to rationalize the electronic behaviour of 1, 2 upon the transfer of two electrons and showed that such carbenes do not behave as redox ligands. With highly perfluorinated carbenes, electronic communication between the di-iron site and the triazole cycle is still limited, suggesting low redox properties of MIC ligands used in this study. Finally, although the catalytic performances of 2 towards proton reduction are weak, the protonation process after a two-electron reduction of 2 was examined by DFT and revealed that the protonation process is favoured by S-protonation but the stabilized diprotonated intermediate featuring a {Fe-H⋯H-S} interaction does not facilitate the release of H2 and may explain low efficiency towards HER (Hydrogen Evolution Reaction).

Insights into the Two-Electron Reductive Process of [FeFe]H2 ase Biomimetics: Cyclic Voltammetry and DFT Investigation on Chelate Control of Redox Properties of [Fe2 (CO)4 (κ2 -Chelate)(µ-Dithiolate)].

The electrochemical reduction of complexes [Fe2 (CO)4 (κ2 -phen)(µ-xdt)] (phen=1,10-phenanthroline; xdt=pdt (1), adtiPr (2)) in MeCN-[Bu4 N][PF6 ] 0.2 m is described as a two-reduction process. DFT calculations show that 1 and its monoreduced form 1- display metal- and phenanthroline-centered frontier orbitals (LUMO and SOMO) indicating the non-innocence of the phenanthroline ligand. Two energetically close geometries were found for the doubly reduced species suggesting an intriguing influence of the phenanthroline ligand leading to the cleavage of a Fe-S bond as proposed generally for this type of complex or retaining the electron density and avoiding Fe-S cleavage. Extension of calculations to other complexes with edt, adtiPr bridge and even virtual species [Fe2 (CO)4 (κ2 -phen)(µ-adtR )] (R=CH(CF3 )2 , H) or [Fe2 (CO)4 (κ2 -phen)(µ-pdtR )] (R=CH(CF3 )2 , iPr) showed that the relative stability between both two-electron-reduced isomers depends on the nature of the bridge and the possibility to establish a remote anagostic interaction between the iron center {Fe(CO)3 } and the group carried by the bridged-head atom of the dithiolate group.

Electrocatalytic Proton Reduction by a Cobalt Complex Containing a Proton-Responsive Bis(alkylimdazole)methane Ligand: Involvement of a C-H Bond in H2 Formation.

Homogeneous electrocatalytic proton reduction is reported using cobalt complex [1](BF4 )2 . This complex comprises two bis(1-methyl-4,5-diphenyl-1H-imidazol-2-yl)methane (HBMIM Ph 2 ) ligands that contain an acidic methylene moiety in their backbone. Upon reduction of [1](BF4 )2 by either electrochemical or chemical means, one of its HBMIM Ph 2 ligands undergoes deprotonation under the formation of dihydrogen. Addition of a mild proton source (acetic acid) to deprotonated complex [2](BF4 ) regenerates protonated complex [1](BF4 )2 . In presence of acetic acid in acetonitrile solvent [1](BF4 )2 shows electrocatalytic proton reduction with a kobs of ≈200 s-1 at an overpotential of 590 mV. Mechanistic investigations supported by DFT (BP86) suggest that dihydrogen formation takes place in an intramolecular fashion through the participation of a methylene C-H bond of the HBMIM Ph 2 ligand and a CoII -H bond through formal heterolytic splitting of the latter. These findings are of interest to the development of responsive ligands for molecular (base)metal (electro)catalysis.

A Diiron Hydrogenase Mimic Featuring a 1,2,3-Triazolylidene.

A novel complex featuring a mesoionic carbene [Fe2(CO)5(trz)(µ-pdt)] (1) (trz = 1-phenyl-l,3-methyl,4-butyl-1,2,3-triazol-5-ylidene), was synthesized and spectroscopically and structurally characterized. The reductive behaviour of this compound in the presence and in the absence of acid (CH3CO2H) was examined by cyclic voltammetry (CV) that revealed the lack of efficient activity towards proton reduction.

FeMo Heterobimetallic Dithiolate Complexes: Investigation of Their Electron Transfer Chemistry and Reactivity toward Acids, a Density Functional Theory Rationalization.

The electrochemical behavior of complexes [FeMo(CO)5(κ2-dppe)(µ-pdt)] (1) and [FeMo(CO)4(MeCN)(κ2-dppe)(µ-pdt)] (2), in the absence and in the presence of acid, has been investigated. The reduction of 1 follows at slow scan rates, in CH2Cl2-[NBu4][PF6] and acid-free media, an ECrevE mechanism that is supported by cyclic voltammetry (CV) experiments and digital CV simulations. In MeCN-[NBu4][PF6], the electrochemical reduction of 1 is the same as in dichloromethane and follows an ECE mechanism at slow scan rates, but with a positive shift of the redox potentials. In contrast, the oxidation of 1 is strongly solvent-dependent. In dichloromethane, the oxidation of 1 is reversible and involves a single electron, while in acetonitrile, it is irreversible at moderate and slow scan rates ( v ≤ ca. 1 V s-1), and some chemical reversibility is apparent at higher scan rates ( v = 10 V s-1). Density functional theory calculations revealed that the chemical step in the ECrevE mechanism corresponds to the dissociation of one PPh2 end of the diphosphine ligand and the transfer of the semibridging CO to the Fe atom, similarly to the mechanism observed in the FeFe analogue complex. However, in the case of 1, the subsequent coordination of the phosphine ligand to the other metal is an unfavorable process.

Electrochemical and Theoretical Investigations of the Oxidatively Induced Reactivity of the Complex [Fe2 (CO)4 (κ2 -dmpe)(µ-adtBn )] Related to the Active Site of [FeFe] Hydrogenases.

Electrochemical oxidation of the complex [Fe2 (CO)4 (κ2 -dmpe)(µ-adtBn )] (adtBn =(SCH2 )2 NCH2 C6 H5 , dmpe=Me2 PCH2 CH2 PMe2 ) (1) has been studied by cyclic voltammetry (CV) in acetonitrile and in dichloromethane in the presence of various substrates L (L=MeCN, trimethylphosphite, isocyanide). The oxidized species, [1-MeCN](PF6 )2 , [1-(P(OMe)3 )2 ](PF6 )2 and [1-(RNC)4 ](PF6 )2 (R=tert-butyl, xylyl), have been prepared and characterized by IR and NMR spectroscopies and, except [1-MeCN](PF6 )2 , by X-ray diffraction analysis. The crystallographic structures of the new FeII FeII complexes reveal that the association of one additional ligand (P(OMe)3 or RNC) occurs and, according to the nature of the substrates, further substitutions of one or three carbonyl groups, by P(OMe)3 or RNC, respectively, arise. Density functional theory (DFT) calculations have been performed to elucidate and discriminate, in each case, the mechanisms leading to the corresponding oxidized species. Moreover, the different degree of ligand substitution in the diiron core has been theoretically rationalized.

Influence of the Dithiolate Bridge on the Oxidative Processes of Diiron Models Related to the Active Site of [FeFe] Hydrogenases.

Electrochemical studies of [Fe2 (CO)4 (κ2 -dmpe)(µ-dithiolate)] (dithiolate=adtBn , pdt) and density functional theory (DFT) calculations reveal the striking influence of an amine functionality in the dithiolate bridge on their oxidative properties. [Fe2 (CO)4 (κ2 -dmpe)(µ-adtBn )] (1) undergoes two one-electron oxidation steps, with the first being partially reversible and the second irreversible. When the adtBn bridge is replaced with pdt, a shift of 60 mV towards more positive potentials is observed for the first oxidation whereas 290 mV separate the oxidation potentials of the two cations. Under CO, oxidation of azadithiolate compound 1 occurs according to an ECE process whereas an EC mechanism takes place for the propanedithiolate species 2. The dication species [1-CO]2+ resulting from the two-electron oxidation of 1 has been spectroscopically and structurally characterized. The molecular details underlying the reactivity of oxidized species have been explored by DFT calculations. The differences in the behaviors of 1 and 2 are mainly due to the presence, or not, of favored interactions between the dithiolate bridge and the diiron site depending on the redox states, FeI FeII or FeII FeII , of the complexes.

[FeFe]-Hydrogenase H-Cluster Mimics with Unique Planar µ-(SCH2 )2 ER2 Linkers (E=Ge and Sn).

Analogues of the [2Fe-2S] subcluster of hydrogenase enzymes in which the central group of the three-atom chain linker between the sulfur atoms is replaced by GeR2 and SnR2 groups are studied. The six-membered FeSCECS rings in these complexes (E=Ge or Sn) adopt an unusual conformation with nearly co-planar SCECS atoms perpendicular to the Fe-Fe core. Computational modelling traces this result to the steric interaction of the Me groups with the axial carbonyls of the Fe2 (CO)6 cluster and low torsional strain for GeMe2 and SnMe2 moieties owing to the long C-Ge and C-Sn bonds. Gas-phase photoelectron spectroscopy of these complexes shows a shift of ionization potentials to lower energies with substantial sulfur orbital character and, as supported by the computations, an increase in sulfur character in the predominantly metal-metal bonding HOMO. Cyclic voltammetry reveals that the complexes follow an ECE-type reduction mechanism (E=electron transfer and C=chemical process) in the absence of acid and catalysis of proton reduction in the presence of acid. Two cyclic tetranuclear complexes featuring the sulfur atoms of two Fe2 S2 (CO)6 cores bridged by CH2 SnR2 CH2 , R=Me, Ph, linkers were also obtained and characterized.

Silicon-Heteroaromatic [FeFe] hydrogenase model complexes: insight into protonation, electrochemical properties, and molecular structures.

To learn from Nature how to create an efficient hydrogen-producing catalyst, much attention has been paid to the investigation of structural and functional biomimics of the active site of [FeFe]-hydrogenase. To understand their catalytic activities, the µ-S atoms of the dithiolate bridge have been considered as possible basic sites during the catalytic processes. For this reason, a series of [FeFe]-H2 ase mimics have been synthesized and characterized. Different [FeFe]-hydrogenase model complexes containing bulky Si-heteroaromatic systems or fluorene directly attached to the dithiolate moiety as well as their mono-PPh3 -substituted derivatives have been prepared and investigated in detail by spectroscopic, electrochemical, X-ray diffraction, and computational methods. The assembly of the herein reported series of complexes shows that the µ-S atoms can be a favored basic site in the catalytic process. Small changes in the (hetero)-aromatic system of the dithiolate moiety are responsible for large differences in their structures. This was elucidated in detail by DFT calculations, which were consistent with the experimental results.

A diferrous dithiolate as a model of the elusive H(ox)(inact) state of the [FeFe] hydrogenases: an electrochemical and theoretical dissection of its redox chemistry.

The reduction of the Fe(II)Fe(II) complex [Fe2(CO)2{P(OMe)3}2(κ(2)-IMe-CH2-IMe)(µ-CO)(µ-pdt)](2+) (2P(2+); pdt = S(CH2)3S), which is a synthetic model of the H cluster of the [FeFe] hydrogenases in its inactive state, has been investigated electrochemically and theoretically (by density functional theory, DFT) in order to determine the mechanisms, intermediates, and products of the related processes. The electrochemical reduction of 2P(2+) occurs according to an ECE-type reaction where the intervening chemical step is the loss of one P(OMe)3 ligand. This outcome, which is based on cyclic voltammetric experiments, is strongly supported by DFT calculations that provide additional information on the intermediates and the energetics of the reactions involved. The electrochemical reoxidation of the neutral product of the reduction follows an EEC process where the chemical step is the binding of P(OMe)3 to a dicationic intermediate. DFT calculations reveal that this intermediate has an unusual geometry wherein one of the two C-H bonds of a side methylene from the pdt group forms an agostic interaction with one Fe center. This interaction is crucial to stabilize the 32e(-) diferrous center and concomitantly to preserve Fe(II) from binding of weakly coordinating species. Nonetheless, it could be displaced by a relatively stronger electron donor such as H2, which could be relevant for the design of new oxidation catalysts.

Acid-base control of hemilabile proton-responsive protecting devices in dimolybdenum, thiolate-bridged complexes.

Dimolybdenum thiolate-bridged complexes [Mo2Cp2(µ-SMe)2(µ-SCH2CH2E)] (E = O (2) or NH (4)) with a proton-dependent protecting device have been synthesized by reaction of [Mo2Cp2(µ-SMe)2(µ-Cl)2] (1) with SCH2CH2EH. The reactivity of the resultant quadruply bridged complexes with acid was investigated in the absence and in the presence of a potential ligand (N2, MeCN, RNC). While the protonation of complexes 2 and 4 under N2 in dichloromethane produced only the oxidized derivatives instead of the desired diazenido compound, ligand binding was observed in MeCN or in the presence of RNC (R = t-Bu, Xyl). Whereas acetonitrile loss from [Mo2Cp2(µ-SMe)2(µ-SCH2CH2OH)(MeCN)2](+) (8(+)) prevented the isolation and characterization of this species, the t-BuNC analogue (6(+)) could be characterized by an X-ray crystal structure. The electrochemistry of 2 and 2(+) was investigated in CH2Cl2 and in MeCN, both in the absence and in the presence of acid. While the addition of HBF4·Et2O to a dichloromethane solution of 2 only produced 2(+) (and presumably H2), 8(+) was the major product of the protonation in MeCN.

A new FeMo complex as a model of heterobimetallic assemblies in natural systems: Mössbauer and density functional theory investigations.

The design of the new FeMo heterobimetallic species [FeMo(CO)5(κ(2)-dppe)(µ-pdt)] is reported. Mössbauer spectroscopy and density functional theory calculations give deep insight into the electronic and structural properties of this compound.

New Fe(I) -Fe(I) complex featuring a rotated conformation related to the [2 Fe](H) subsite of [Fe-Fe] hydrogenase.

Rotated geometry: The first example of a dinuclear iron(I)-iron(I) complex featuring a fully rotated geometry related to the active site of [Fe-Fe] hydrogenase is reported.

Electrochemical and theoretical investigations of the role of the appended base on the reduction of protons by [Fe2(CO)4(κ2-PNP(R)(µ-S(CH2)3S] (PNP(R) ={Ph2PCH2}2NR, R=Me, Ph).

The behavior of [Fe(2)(CO)(4)(κ(2)-PNP(R))(µ-pdt)] (PNP(R) =(Ph(2)PCH(2))(2)NR, R=Me (1), Ph (2); pdt=S(CH(2))(3)S) in the presence of acids is investigated experimentally and theoretically (using density functional theory) in order to determine the mechanisms of the proton reduction steps supported by these complexes, and to assess the role of the PNP(R) appended base in these processes for different redox states of the metal centers. The nature of the R substituent of the nitrogen base does not substantially affect the course of the protonation of the neutral complex by CF(3)SO(3)H or CH(3)SO(3)H; the cation with a bridging hydride ligand, 1 µH(+) (R=Me) or 2 µH(+) (R=Ph) is obtained rapidly. Only 1 µH(+) can be protonated at the nitrogen atom of the PNP chelate by HBF(4)·Et(2)O or CF(3)SO(3)H, which results in a positive shift of the proton reduction by approximately 0.15 V. The theoretical study demonstrates that in this process, dihydrogen can be released from a η(2)-H(2) species in the Fe(I)Fe(II) state. When R=Ph, the bridging hydride cation 2 µH(+) cannot be protonated at the amine function by HBF(4)·Et(2)O or CF(3)SO(3)H, and protonation at the N atom of the one-electron reduced analogue is also less favored than that of a S atom of the partially de-coordinated dithiolate bridge. In this situation, proton reduction occurs at the potential of the bridging hydride cation, 2 µH(+). The rate constants of the overall proton reduction processes are small for both complexes 1 and 2 (k(obs) ≈4-7 s(-1)) because of the slow intramolecular proton migration and H(2) release steps identified by the theoretical study.

Geometrical influence on the non-biomimetic heterolytic splitting of H2 by bio-inspired [FeFe]-hydrogenase complexes: a rare example of inverted frustrated Lewis pair based reactivity.

Despite the high levels of interest in the synthesis of bio-inspired [FeFe]-hydrogenase complexes, H2 oxidation, which is one specific aspect of hydrogenase enzymatic activity, is not observed for most reported complexes. To attempt H-H bond cleavage, two disubstituted diiron dithiolate complexes in the form of [Fe2(µ-pdt)L2(CO)4] (L: PMe3, dmpe) have been used to play the non-biomimetic role of a Lewis base, with frustrated Lewis pairs (FLPs) formed in the presence of B(C6F5)3 Lewis acid. These unprecedented FLPs, based on the bimetallic Lewis base partner, allow the heterolytic splitting of the H2 molecule, forming a protonated diiron cation and hydrido-borate anion. The substitution, symmetrical or asymmetrical, of two phosphine ligands at the diiron dithiolate core induces a strong difference in the H2 bond cleavage abilities, with the FLP based on the first complex being more efficient than the second. DFT investigations examined the different mechanistic pathways involving each accessible isomer and rationalized the experimental findings. One of the main DFT results highlights that the iron site acting as a Lewis base for the asymmetrical complex is the {Fe(CO)3} subunit, which is less electron-rich than the {FeL(CO)2} site of the symmetrical complex, diminishing the reactivity towards H2. Calculations relating to the different mechanistic pathways revealed the presence of a terminal hydride intermediate at the apical site of a rotated {Fe(CO)3} site, which is experimentally observed, and a semi-bridging hydride intermediate from H2 activation at the Fe-Fe site; these are responsible for a favourable back-reaction, reducing the conversion yield observed in the case of the asymmetrical complex. The use of two equivalents of Lewis acid allows for more complete and faster H2 bond cleavage due to the encapsulation of the hydrido-borate species by a second borane, favouring the reactivity of each FLP, in agreement with DFT calculations.

Oxidatively induced reactivity of [Fe2(CO)4(κ2-dppe)(µ-pdt)]: an electrochemical and theoretical study of the structure change and ligand binding processes.

The one-electron oxidation of the diiron complex [Fe(2)(CO)(4)(κ(2)-dppe)(µ-pdt)] (1) (dppe = Ph(2)PCH(2)CH(2)PPh(2); pdt = S(CH(2))(3)S) has been investigated in the absence and in the presence of P(OMe)(3), by both electrochemical and theoretical methods, to shed light on the mechanism and the location of the oxidatively induced structure change. While cyclic voltammetric experiments did not allow to discriminate between a two-step (EC) and a concerted, quasi-reversible (QR) process, density functional theory (DFT) calculations favor the first option. When P(OMe)(3) is present, the one-electron oxidation produces singly and doubly substituted cations, [Fe(2)(CO)(4-n){P(OMe)(3)}(n)(κ(2)-dppe)(µ-pdt)](+) (n = 1: 2(+); n = 2: 3(+)) following mechanisms that were investigated in detail by DFT. Although the most stable isomer of 1(+) and 2(+) (and 3(+)) show a rotated Fe(dppe) center, binding of P(OMe)(3) occurs at the neighboring iron center of both 1(+) and 2(+). The neutral compound 3 was obtained by controlled-potential reduction of the corresponding cation, while 2 was quantitatively produced by reaction of 3 with CO. The CO dependent conversion of 3 into 2 as well as the 2(+) ↔ 3(+) interconversion were examined by DFT.

Oxo-functionalised mesoionic NHC nickel complexes for selective electrocatalytic reduction of CO2 to formate.

Strategies for the conversion of CO2 to valuable products are paramount for reducing the environmental risks associated with high levels of this greenhouse gas and offer unique opportunities for transforming waste into useful products. While catalysts based on nickel as an Earth-abundant metal for the sustainable reduction of CO2 are known, the vast majority produce predominantly CO as a product. Here, efficient and selective CO2 reduction to formate as a synthetically valuable product has been accomplished with novel nickel complexes containing a tailored C,O-bidentate chelating mesoionic carbene ligand. These nickel(ii) complexes are easily accessible and show excellent catalytic activity for electrochemical H+ reduction to H2 (from HOAc in MeCN), and CO2 reduction (from CO2-saturated MeOH/MeCN solution) with high faradaic efficiency to yield formate exclusively as an industrially and synthetically valuable product from CO2. The most active catalyst precursor features the 4,6-di-tert-butyl substituted phenolate triazolylidene ligand, tolerates different proton donors including water, and reaches an unprecedented faradaic efficiency of 83% for formate production, constituting the most active and selective Ni-based system known to date for converting CO2 into formate as an important commodity chemical.