A highly selective mitochondria-targeting fluorescent K(+) sensor.

Regulation of intracellular potassium (K(+) ) concentration plays a key role in metabolic processes. So far, only a few intracellular K(+) sensors have been developed. The highly selective fluorescent K(+) sensor KS6 for monitoring K(+) ion dynamics in mitochondria was produced by coupling triphenylphosphonium, borondipyrromethene (BODIPY), and triazacryptand (TAC). KS6 shows a good response to K(+) in the range 30-500 mM, a large dynamic range (Fmax /F0 ≈130), high brightness (ϕf =14.4 % at 150 mM of K(+) ), and insensitivity to both pH in the range 5.5-9.0 and other metal ions under physiological conditions. Colocalization tests of KS6 with MitoTracker Green confirmed its predominant localization in the mitochondria of HeLa and U87MG cells. K(+) efflux/influx in the mitochondria was observed upon stimulation with ionophores, nigericin, or ionomycin. KS6 is thus a highly selective semiquantitative K(+) sensor suitable for the study of mitochondrial potassium flux in live cells.

Cost or advantage? Intra-sentential language switching could facilitate L2 emotional words' comprehension in auditory modality.

Language switching is encountered commonly and inevitably in bilingual society and often induces costs for target language's production. However, for auditory words' comprehension at sentence level, the limited research showed divergent findings. Some research observed comprehension costs when the language of target words was switched with the code of sentential contexts kept constant; but a potential switch advantage was also showed in non-dominant targets' processing when sentential context switches occurred. Additionally, it's well documented that the words' emotional connotations play a key role in both L1 and L2 word comprehension. Therefore, we aimed to explore which switch effect would occur when bilinguals comprehended L1/L2 emotional target nouns in auditory modality at behavioral and neural level through a visual object selection task. Behaviorally, switch related costs occurred in L1 targets' comprehension, whereas advantage effects were found in L2. Moreover, greater switch advantage occurred for positive and negative targets than for neutral ones. Consistently, larger LPC (Late Positive Component) defection was elicited for L2-Switch trials relative to L2-Nonswitch trials and the differences of LPC's amplitude could predict the behavioral advantageous effects of switching in nondominant targets' comprehension, which suggest that language switching lead to deeper re-analyses for emotional words. Taken together, it's suggested that bilinguals can adaptively utilize top-down (sentential prediction) and bottom-up (words' emotional information) cues to access weaker L2 representations.

Roles of p38 MAPK signalling in intervertebral disc degeneration.

Intervertebral disc degeneration (IVDD) is a common degenerative disease mediated by multiple factors. Because of its complex aetiology and pathology, no specific molecular mechanisms have yet been identified and no definitive treatments are currently available for IVDD. p38 mitogen-activated protein kinase (MAPK) signalling, part of the serine and threonine (Ser/Thr) protein kinases family, is associated with the progression of IVDD, by mediating the inflammatory response, increasing extracellular matrix (ECM) degradation, promoting cell apoptosis and senescence and suppressing cell proliferation and autophagy. Meanwhile, the inhibition of p38 MAPK signalling has a significant effect on IVDD treatment. In this review, we first summarize the regulation of p38 MAPK signalling and then highlight the changes in the expression of p38 MAPK signalling and their impact on pathological process of IVDD. Moreover, we discuss the current applications and future prospects of p38 MAPK as a therapeutic target for IVDD treatment.

[Finite element analysis of the effect of plate placement angle on cervical spine stability in anterior cervical fusion surgery].

OBJECTIVE: Using the method of finite element analysis, to compare the biomechanical properties between the plate deviating from the long axis of the cervical spine and the standard placement of the plate in the anterior cervical fusion surgery. METHODS: A healthy female volunteer was selected and CT scan (C1-T1) was performed. Using Mimics 19.0, Geomagic Studio 2015, Solidworks 2018, Ansys Workbench 17.2 to establish a lower cervical spine (C3-C7) model and to verify the reliability of the model. Subsequently, anterior cervical plates of different angles and lengths were placed to establish an anterior cervical discectomy fusion (ACDF) model. Applying 73.6 N axial pressure and 1 NM pure moment on C3 to make the model produce flexion, extension, lateral bending and rotation activities, observed the model stress cloud diagram and recorded the maximum stress value of the instrument and the intervertebral mobility. RESULTS: The lower cervical spine (C3-C7) finite element model was established and verified against the published literature on the range of motion (ROM) of cervical spine. Effect of steel plate offset axis on stress distribution, maximum stress value and intervertebral ROM of internal fixation apparatus was minimal, and the mechanical effect of steel plate offset was less in double section steel plate than in single section steel plate. CONCLUSION: Little effect on the mechanical stability of the cervical spine was anticipated when the anterior cervical plate was not perfectly aligned with the long axis of the cervical spine. If the tilt of the plate in clinical surgery is less than 20°, there is no need to readjust the position of the plate.

[Research progress on minimally invasive treatment of anterior pelvic ring fracture].

OBJECTIVE: To summarize the related research results of minimally invasive treatment of anterior pelvic ring fracture, and to improve the understanding of minimally invasive treatment of anterior pelvic ring fracture. METHODS: The literature of minimally invasive treatment of anterior pelvic ring fracture at domestic and overseas in recent years was reviewed, and the reduction and fixation methods of minimally invasive treatment were summarized and analyzed. RESULTS: The pelvic reduction frame may be an effective auxiliary method for minimally invasive reduction of pelvis. The fixation methods of anterior pelvic ring include percutaneous screw fixation, stent fixation, and percutaneous plate fixation. CONCLUSION: One kind of fixation is not applicable to all types of anterior pelvic ring fracture, and the fixation method should be selected according to the type of fracture and the patient's condition to minimize the complications.

[Progress of research on the relationship between calcitonin gene-related peptide and RANK/RANKL/OPG system in the bone reconstruction].

OBJECTIVE: To summarize the research progress on the calcitonin gene-related peptide (CGRP) and receptor activator of nuclear factor κB (RANK)/receptor activator of nuclear factor κB ligand (RANKL)/osteoprotegerin (OPG) system during bone reconstruction to provide theoretical basis for further research on the prevention and treatment of bone-related diseases. METHODS: The relevant research results at home and abroad in recent years were analyzed and summarized. RESULTS: CGRP and RANK/RANKL/OPG system play important regulatory roles in the bone reconstruction. CONCLUSION: At present, the research on the mechanism of CGRP and RANK/RANKL/OPG system in bone reconstruction is insufficient. Therefore, it is necessary to study further on the process and interrelation of CGRP and RANK/RANKL/OPG system in bone reconstruction to confirm their mechanism, which will bring new ideas and methods for the treatment of bone related diseases in clinic.

Polarization selective electro-optic polymer waveguide devices by direct electron beam writing.

A novel technique for the fabrication of polarization selective electro-optic polymer waveguide devices with direct electron beam writing was described. Birefringence induced by the electric field poling in the electro-optic polymer film was erased in the electron beam exposed regions. The formed waveguides had stronger confinement for the light polarized along the poling direction. High fabrication resolution on the 100 nm scale or smaller could be achieved. Fabrication of polymer polarizer and polarization selective microring resonators with this technique was reported. The highest polarization extinction ratio was measured to be 21.4 dB.

[Research progress of lateral wall injury of intertrochanteric fracture].

Objective: To summarize the general concept of lateral wall, the causes of lateral wall injury, and surgical strategies in order to improve the understanding of lateral wall and reduce the complications of operation. Methods: The related literature on lateral wall was extensively reviewed, summarized, and analyzed. Results: The superior extent of the lateral wall is vastus lateralis ridge and the inferior extent is the intersection between the lateral femoral cortex and a line drawn at a tangent to the inferior femoral neck. The integrity of the lateral wall is important to prevent the failure of fixation and reoperation of intertrochanteric fractures. The main causes of injury are that there is no suitable typing criteria as a guide, the fracture pattern shown by X-ray does not match with the actual situation of the fracture, the type of fracture is special, and the operation is improper. The main treatment is to reconstruct the lateral wall and choose different reconstruction methods according to different fracture patterns. Conclusion: The lateral wall is very important for the treatment of intertrochanteric fracture. Lateral wall fracture should be internal fixation in order to minimize the risk of reoperation.

Multifunctional PHPMA-Derived Polymer for Ratiometric pH Sensing, Fluorescence Imaging, and Magnetic Resonance Imaging.

In this paper, we report synthesis and characterization of a novel multimodality (MRI/fluorescence) probe for pH sensing and imaging. A multifunctional polymer was derived from poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA) and integrated with a naphthalimide-based-ratiometric fluorescence probe and a gadolinium-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid complex (Gd-DOTA complex). The polymer was characterized using UV-vis absorption spectrophotometry, fluorescence spectrofluorophotometry, magnetic resonance imaging (MRI), and confocal microscopy for optical and MRI-based pH sensing and cellular imaging. In vitro labeling of macrophage J774 and esophageal CP-A cell lines shows the polymer's ability to be internalized in the cells. The transverse relaxation time (T2) of the polymer was observed to be pH-dependent, whereas the spin-lattice relaxation time (T1) was not. The pH probe in the polymer shows a strong fluorescence-based ratiometric pH response with emission window changes, exhibiting blue emission under acidic conditions and green emission under basic conditions, respectively. This study provides new materials with multimodalities for pH sensing and imaging.

Phenyltetraene-based nonlinear optical chromophores with enhanced chemical stability and electrooptic activity.

"Push-pull" phenyltetraene-based chromophores are too sensitive to be incorporated into Diels-Alder-type cross-linkable polymers due to the reactivity of its diene segment with maleimides. A facile synthetic route has been explored to incorporate a methoxy group into the R position of such chromophores, which reduces their diene reactivity during the poling and lattice hardening process. The poled polymers with one of such chromophores doped in a cross-linked polymer lattice showed ultrahigh electro-optic activities, up to 306 pm/V at 1310 nm.

Facile synthesis of highly efficient phenyltetraene-based nonlinear optical chromophores for electrooptics.

[reaction: see text] A facile synthetic route has been developed to convert an electron-rich, sterically hindered dialkylaminodienone into a conjugated dialkylaminotrienal with good yield. The derived dialkylaminotetraene-type nonlinear optical chromophores possess an all-trans conformation and can be functionalized with fluoro-dendron to provide proper shape modification for poling. Polymers doped with two examples of these chromophores in high concentrations have been poled to afford ultra-large electrooptic coefficients (r(33)) of 208 and 262 pm/V, respectively, at the measuring wavelength of 1.31 mum.

Cascading Retro-Diels-Alder Cycloreversion and Sydnone-Maleimide Based Double 1,3-Dipolar Cycloaddition for Quantitative Thermal Cross-Linking of an Amorphous Polymer Solid.

A new approach to polymer cross-linking is investigated using a cascading cycloreversion of a maleimide-furan adduct and a double 1,3-dipolar cycloaddition between a sydnone and maleimide. The cross-linking proceeds quantitatively above 63 °C, despite the polymer possessing no observable glass transition temperature. The resulting polymer network possesses a high thermal stability (>300 °C) due to the irreversibility of the sydnone-maleimide cycloaddition, which releases CO2 during the cross-linking, driving the reaction. The rigid three-dimensional structure of the bis-maleimide-sydnone cycloadduct produced local free volumes in films, decreasing the dielectric constant of the material.

Aggregation induced emission (AIE) of trifluoromethyl substituted distyrylbenzenes.

The AIE properties of two trifluoromethyl substituted distyrylbenzene model compounds were compared. The fluorescence quantum efficiency of these molecules can be modulated by tuning their subtle solid-state intermolecular interactions.

Dipolar Chromophore Facilitated Huisgen Cross-Linking Reactions for Highly Efficient and Thermally Stable Electrooptic Polymers.

Efficient thermal cross-linking protocol for an azide-alkyne-based Huisgen 1,3-dipolar cycloaddition reaction has been developed for making highly efficient electrooptic (EO) polymers. The material system is based on an azide-containing side-chain copolymer and cross-linkable dendronized chromophores that have two pairs of dendritic bispropargyl ether moiety on the periphery. The dendritic chromophore possesses a tetraene conjugating bridge and strong dialkylaminophenyl donor and CF3-TCF acceptor. This material system not only provides adequate accessibility for propargyl ether to react azido-containing moieties for efficient cross-linking but also gives the rotational freedom needed for electric field poling. The site isolation offered by the bispropargyl ether dendron effectively suppresses the unwanted side reactions that are usually associated with the decompositions of azides and chromophores. Due to these concerted efforts, it allows the Huisgen 1,3-dipolar cycloaddition reactions to be carried out at moderate temperatures in polar media that have a high concentration of dipolar polyene chromophores. Through sequential electric field poling and in situ cross-linking, the poled films exhibit very large EO activity (up to 147 pm/V at 1.31 µm) with a long-term alignment stability at 85 °C.

Molecular mobility in self-assembled dendritic chromophore glasses.

Increasing complexity in bottom-up molecular designs of amorphous structures with multiple relaxation modes demands an integrated and cognitive design approach, where chemical synthesis is guided by both analytical tools and theoretical simulations. In particular, this is apparent for novel organic second-order nonlinear optical materials of self-assembling molecular glasses involving dendritic arene stabilization moieties (phenyl, naphthyl, and anthryl) with electro-optical activities above 300 pm/V. In this study, nanoscale thermo-mechanical analyses yield direct insight into the molecular enthalpic and entropic relaxation modes. Arene-perfluoroarene interactions for coarse self-assembly are found to impose three phase relaxation regimes, with intermediate regimes of 8-15 degrees C in width and apparent activation energies between 40 and 60 kcal/mol to be the most effective for poling. Energetic analyses based on intrinsic friction microscopy (IFA) identify increasing temporal stability with increasing arene size for the low-temperature regime. Electric field poling efficiency is found to be inversely proportional to entropic cooperative contributions that can make up 80% of the overall apparent relaxation energy for the high-temperature regime. The origin for the activation energies below the incipient glass transition temperature, based on complementary molecular dynamic simulations, is tied primarily to noncovalent interactions between chromophore (dipole), dendritic (quadrupole) moieties, and combinations thereof.

Terahertz all-optical modulation in a silicon-polymer hybrid system.

Although gigahertz-scale free-carrier modulators have been demonstrated in silicon, intensity modulators operating at terahertz speeds have not been reported because of silicon's weak ultrafast nonlinearity. We have demonstrated intensity modulation of light with light in a silicon-polymer waveguide device, based on the all-optical Kerr effect-the ultrafast effect used in four-wave mixing. Direct measurements of time-domain intensity modulation are made at speeds of 10 GHz. We showed experimentally that the mechanism of this modulation is ultrafast through spectral measurements, and that intensity modulation at frequencies in excess of 1 THz can be obtained. By integrating optical polymers through evanescent coupling to silicon waveguides, we greatly increase the effective nonlinearity of the waveguide, allowing operation at continuous-wave power levels compatible with telecommunication systems. These devices are a first step in the development of large-scale integrated ultrafast optical logic in silicon, and are two orders of magnitude faster than previously reported silicon devices.