Femoral Coronal Malalignment is Associated With Failure in Mobile-Bearing Medial Unicompartmental Knee Arthroplasty.

BACKGROUND: Femur-first (FF) technique for mobile-bearing medial unicompartmental knee arthroplasty (UKA) has been described as an alternative to tibia-first (TF) technique. The aim of this study was to compare the radiographic results in UKAs using FF or TF techniques and their influence on failure rates. METHODS: We retrospectively reviewed 288 UKAs with a minimum 2-year follow-up. There were 147 knees in the TF and 141 knees in the FF cohorts. Alignment parameters and overhang were assessed as outliers and far outliers. The mean follow-up was 6 years (range, 2 to 16), the mean age was 63 years (range, 27 to 92), and 45% of patients were women. Univariate and multivariate statistical analyses were carried out with Cox regression models. RESULTS: There were 13 and 6 revisions in the TF and FF cohorts, respectively. The FF had lower rates of femoral coronal alignment (FCA) or femoral sagittal alignment outliers compared to the TF (5.7% versus 19%, P = .011). Tibial coronal alignment and tibial sagittal alignment did not significantly differ between the techniques (22.7% in FF versus 29.9% in TF, P = .119). Overhang outliers did not differ significantly between the groups. Younger age was associated with a higher revision rate (P = .006), while FF versus TF, sex, body mass index, and postoperative mechanical axis did not show statistically significant associations. In multivariate analysis, FCA outliers and younger age were significantly associated with revision. CONCLUSIONS: The FF technique in mobile-bearing UKA resulted in fewer FCA outliers compared to TF. Despite improved knee alignment with the FF technique, FCA outliers and younger age were associated with a higher revision rate, independent of technique.

A Randomized Clinical Trial of Direct Anterior Versus Mini-Posterior Total Hip Arthroplasty: Small, Early Functional Differences Did Not Lead to Meaningful Clinical Differences at 7.5 Years.

BACKGROUND: Our previously reported randomized clinical trial of direct anterior approach (DAA) versus mini-posterior approach (MPA) total hip arthroplasty showed slightly faster initial recovery for patients who had a DAA and no differences in complications or clinical or radiographic outcomes beyond 8 weeks. The aims of the current study were to determine if early advantages of DAA led to meaningful clinical differences beyond 5 years and to identify differences in midterm complications. METHODS: Of the 101 original patients, 93 were eligible for follow-up at a mean of 7.5 years (range, 2.1 to 10). Clinical outcomes were compared with Harris Hip, 12-Item Short Form Health Survey, and Hip Disability and Osteoarthritis Outcomes Scores (HOOS) scores and subscores, complications, reoperations, and revisions. RESULTS: Harris Hip scores were similar (95.3 ± 6.0 versus 93.5 ± 10.3 for DAA and MPA, respectively, P = .79). The 12-Item Short Form Health Survey physical and mental scores were similar (46.2 ± 9.3 versus 46.2 ± 10.6, P = .79, and 52.3 ± 7.1 versus 55.2 ± 4.5, P = .07 in the DAA and MPA groups, respectively). The HOOS scores were similar (97.4 ± 7.9 versus 96.3 ± 6.7 for DAA and MPA, respectively, P = .07). The HOOS quality of life subscores were 96.9 ± 10.8 versus 92.3 ± 16.0 for DAA and MPA, respectively (P = .046). No clinical outcome met the minimally clinically important difference. There were 4 surgical complications in the DAA group (1 femoral loosening requiring revision, 1 dislocation treated closed, and 2 wound dehiscences requiring debridement), and 6 surgical complications in the MPA group (3 dislocations, 2 treated closed, and 1 revised to dual mobility; 2 intraoperative fractures treated with a cable; and 1 wound dehiscence treated nonoperatively). CONCLUSIONS: At a mean of 7.5 years, this randomized clinical trial demonstrated no clinically meaningful differences in outcomes, complications, reoperations, or revisions between DAA and MPA total hip arthroplasty. LEVEL OF EVIDENCE: IV.

Highly Porous Acetabular Cup and Augment Constructs in Complex Revision Total Hip Arthroplasty: What Predicts 10-Year Implant Survivorship?

BACKGROUND: Porous tantalum acetabular cup and augment constructs have demonstrated favorable outcomes up to 5 years postsurgery despite severe bone loss during revision total hip arthroplasty (THA). Prior literature lacks long-term studies with substantial case numbers. This study aims to assess long-term clinical and radiographic outcomes 10 years postsurgery in patients undergoing revision THA with porous tantalum acetabular cup-augment constructs and determine factors associated with long-term survivorship. METHODS: Between 2000 and 2012, 157 revision THAs were performed in cases with major acetabular defects (mainly Paprosky type IIIA and IIIB) utilizing porous tantalum cup-augment constructs. Pelvic discontinuity was noted intraoperatively in 17 hips (11%). Postoperative radiographs were evaluated at regular intervals for implant stability and radiolucent lines. There were 49 patients who had complete radiographic follow-up at 10 years or longer postsurgery. RESULTS: The 10-year survivorship free of revision of the cup-augment construct for aseptic loosening was 93%, free of any acetabular construct revision was 91%, free of any hip rerevision was 77%, and free of any reoperation was 75%. Pelvic discontinuity was associated with increased risk of reoperation (hazard ratio [HR] = 2.8), any hip rerevision (HR = 3.2), any cup-augment construct revision (HR = 11.8), and aseptic construct revision (HR = 10.0). Of unrevised cases with radiographs at 10 years, 4 hips showed radiographic loosening. Mean Harris hip scores improved from 47 preoperatively to 79 at 10 years. CONCLUSIONS: Porous tantalum acetabular cup-augment constructs used in revision THA with severe acetabular bone loss provide excellent implant survivorship at 10 years when the acetabulum is intact. Due to lower survivorship of cup-augment constructs in cases of pelvic discontinuity, additional construct fixation or stabilization methods are recommended, when a discontinuity is present. LEVEL OF EVIDENCE: IV.

The Frank Stinchfield Award: Assembly and Dissociation Forces Differ Between Commonly Used Dual Mobility Implants: A Biomechanical Study.

BACKGROUND: Intraprosthetic dissociation (IPD) is a complication unique to dual mobility (DM) implants where the outer polyethylene head dissociates from the inner femoral head. Increasing reports of IPD at the time of closed reduction of large head DM dislocations prompted this biomechanical study evaluating the assembly and dissociation forces of DM heads. METHODS: We tested 17 polyethylene DM heads from 5 vendors. Of the heads, 12 were highly cross-linked polyethylene (4 vendors) and 5 were infused with vitamin E (2 vendors). Heads were between 46 and 47 mm in diameter, accepting a 28 mm-inner ceramic head. Implants were assembled and disassembled using a servohydraulic machine that recorded the forces and torques applied during testing. Dissociation was tested via both axial pull-out and lever-out techniques, where lever-out simulated stem-on-acetabular component impingement. RESULTS: The initial maximum assembly force was significantly different between all vendors (P < .01) and decreased for all implants with subsequent assembly. Vendor 4-E (Link with vitamin E) heads required the highest assembly force (1,831.9 ± 81.95 N), followed by Vendor 3 (Smith & Nephew), Vendor 5 (DePuy Synthes), Vendor 1-E (Zimmer Biomet with vitamin E), Vendor 2 (Stryker), and Vendor 1 (Zimmer Biomet Arcom). Vendor 4-E implants showed the greatest dissociation resistance in both pull-out (2,059.89 N, n = 1) and lever-out (38.95 ± 2.79 Nm) tests. Vendor 1-E implants with vitamin E required higher assembly force, dissociation force, and energy than Vendor 1 heads without vitamin E. CONCLUSIONS: There were notable differences in DM assembly and dissociation forces between implants. Diminishing force was required for assembly with each additional trial across vendors. Vendor 4-E DM heads required the highest assembly and dissociation forces. Vitamin E appeared to increase the assembly and dissociation forces. Based on these results, DM polyethylene heads should not be reimplanted after dissociation, and there may be a role for establishing a minimum dissociation energy standard to minimize IPD risk.

International Delphi Study on Wound Closure and Incision Management in Joint Arthroplasty Part 2: Total Hip Arthroplasty.

BACKGROUND: This modified Delphi study aimed to develop a consensus on optimal wound closure and incision management strategies for total hip arthroplasty (THA). Given the critical nature of wound care and incision management in influencing patient outcomes, this study sought to synthesize evidence-based best practices for wound care in THA procedures. METHODS: An international panel of 20 orthopedic surgeons from Europe, Canada, and the United States evaluated a targeted literature review of 18 statements (14 specific to THA and 4 related to both THA and total knee arthroplasty). There were 3 rounds of anonymous voting per topic using a modified 5-point Likert scale with a predetermined consensus threshold of ≥ 75% agreement necessary for a statement to be accepted. RESULTS: After 3 rounds of voting, consensus was achieved for all 18 statements. Notable recommendations for THA wound management included (1) the use of barbed sutures over non-barbed sutures (shorter closing times and overall cost savings); (2) the use of subcuticular sutures over skin staples (lower risk of superficial infections and higher patient preferences, but longer closing times); (3) the use of mesh-adhesives over silver-impregnated dressings (lower rate of wound complications); (4) for at-risk patients, the use of negative pressure wound therapy over other dressings (lower wound complications and reoperations, as well as fewer dressing changes); and (5) the use of triclosan-coated sutures (lower risk of surgical site infection) over standard sutures. CONCLUSIONS: Through a structured modified Delphi approach, a panel of 20 orthopedic surgeons reached consensus on all 18 statements pertaining to wound closure and incision management in THA. This study provides a foundational framework for establishing evidence-based best practices, aiming to reduce variability in patient outcomes and to enhance the overall quality of care in THA procedures.

International Delphi Study on Wound Closure and Dressing Management in Joint Arthroplasty: Part 1: Total Knee Arthroplasty.

BACKGROUND: The purpose of this modified Delphi study was to obtain consensus on wound closure and dressing management in total knee arthroplasty (TKA). METHODS: The Delphi panel included 20 orthopaedic surgeons from Europe and North America. There were 26 statements identified using a targeted literature review. Consensus was developed for the statements with up to three rounds of anonymous voting per topic. Panelists ranked their agreement with each statement on a five-point Likert scale. An a priori threshold of ≥ 75% was required for consensus. RESULTS: All 26 statements achieved consensus after three rounds of anonymous voting. Wound closure-related interventions that were recommended for use in TKA included: 1) closing in semi-flexion versus extension (superior range of motion); 2) using aspirin for venous thromboembolism prophylaxis over other agents (reduces wound complications); 3) barbed sutures over non-barbed sutures (lower wound complications, better cosmetic appearances, shorter closing times, and overall cost savings); 4) mesh-adhesives over other skin closure methods (lower wound complications, higher patient satisfaction scores, lower rates of readmission); 5) silver-impregnated dressings over standard dressings (lower wound complications, decreased infections, fewer dressing changes); 6) in high-risk patients, negative pressure wound therapy over other dressings (lower wound complications, decreased reoperations, fewer dressing changes); and 7) using triclosan-coated over non-antimicrobial-coated sutures (lower risks of surgical site infection). CONCLUSIONS: Using a modified Delphi approach, the panel achieved consensus on 26 statements pertaining to wound closure and dressing management in TKA. This study forms the basis for identifying critical evidence supported by clinical practice for wound management to help reduce variability, advance standardization, and ultimately improve outcomes during TKA. The results presented here can serve as the foundation for knowledge, education, and improved clinical outcomes for surgeons performing TKAs.

Total knee replacement with an accelerometer-based, hand-held navigation system improves knee alignment: reliable in all patients.

BACKGROUND: Achieving adequate alignment has traditionally been an important goal in total knee arthroplasty to achieve long-term implant survival. While accelerometer-based hand-held navigation systems (ABN) has been introduced as a way to achieve alignment, there is a limited body of evidence on its accuracy, especially in patients under 65 years with differing etiologies for knee arthritis. This study aimed to assess the precision of a specific ABN system in restoring the mechanical axis and report surgical variables and complications, with particular attention to younger patients. METHODS: We conducted a retrospective review of 310 primary TKA performed with ABN from May 2016 to February 2021. The mean patient age was 67.4 (SD 8.9) years, with 43% under 65 years and mean body mass index of 33.2 (SD 6.8). The average surgical time was 96.8 min (57-171) and the average follow-up was 3.3 years (1.9-6.7). Data regarding length of stay, pain, range of motion (ROM), complications, and reinterventions were collected from the institutional joint arthroplasty registry and the medical records. Preoperative mechanical axis measurements and postoperative radiological data, including mechanical axis, component alignment and mechanical alignment outliers were analyzed. RESULTS: The mean preoperative mechanical axis was 175.4° (SD 7.6), with 248 knees (80%) in preoperative varus. The mean postoperative mechanical axis was 179.5° (SD 1.96) with 98% of knees falling within ± 3° of the neutral mechanical axis. Only 6 knees (2 varus, 4 valgus) fell outside the ± 3° range. And 3 knees (1 varus, 2 valgus) fell outside the ± 5° range. In the sagittal plane, 296 knees (95.5%) knees were within ± 3° of goal of 3 degrees of femoral flexion and 302 (97.4%) knees were within ± 2° of goal 1° of slope for tibial component. Far outliers (alignment outside ± 5° of targeted position) were found in 3 knees. Factors such as posttraumatic arthrosis, previous surgery, presence of retained hardware, and age below 65 years were not associated with increase in alignment outliers and far outliers. No complications related to the navigation system were observed. There were 22 complications and 20 reoperations, including 2 revisions for periprosthetic joint infection and 1 revision for flexion instability. Patients that required knee manipulation achieved an ultimate flexion of 110° (SD 14.1). CONCLUSIONS: The ABN system proved to be user-friendly and accurate in reducing alignment outliers in both coronal and sagittal planes in all patient populations. It offers a straightforward navigation solution while preserving surgeon autonomy and the use of traditional surgical tools. These findings advocate for the integration of this navigation system as a valuable tool to enhance the precision of TKA surgery in all patient groups.

Making the cut: a technical note and literature review of Bernese periacetabular osteotomy techniques with special attention to ischial osteotomy initiation and completion with an inside to anterior curved osteotomy.

Periacetabular osteotomy includes a fluoroscopy-guided ischial cut without direct visualization. Previously described techniques include a mediolateral ischial cortex cut, which is associated with the risk of injuring nearby nerves. Another drawback of that technique is the difficulty connecting an ischial cortex cut with a retroacetabular cut due to orthogonal nature of the osteotomy. In general, an additional cut from medial to lateral is required. The present study aimed to describe a technique that eliminates those problems due to use of only a central cut of the ischium and the curved nature of the osteotomy.

Osteoid osteomas of the hip: a well-recognized entity with a proclivity for misdiagnosis.

OBJECTIVES: The diagnosis of osteoid osteomas (OO) about the hip can be challenging as presenting symptoms can mimic other, more common, periarticular pathologies. Our aims were to identify the most common misdiagnoses and treatments, mean delay in diagnosis, characteristic imaging features and provide tips for avoiding diagnostic imaging pitfalls for patients with OO of the hip. METHODS: We identified 33 patients (34 tumors) with OO about the hip who were referred for radiofrequency ablation between 1998 and 2020. Imaging studies reviewed included radiographs (n = 29), CT (n = 34), and MRI (n = 26). RESULTS: The most common initial diagnoses were femoral neck stress fracture (n = 8), femoroacetabular impingement (FAI) (n = 7), and malignant tumor or infection (n = 4). The mean time from symptom onset to diagnosis of OO was 15 months (range, 0.4-84). The mean time from initial incorrect diagnosis to OO diagnosis was 9 months (range, 0-46). CONCLUSIONS: The diagnosis of OO of the hip is challenging, with up to 70% of cases initially misdiagnosed as a femoral neck stress fracture, FAI, bone tumor, or other joint pathology in our series. Consideration of OO in the differential diagnosis of hip pain in adolescent patients and awareness of the characteristic imaging findings are critical for making an accurate diagnosis. KEY POINTS: • The diagnosis of osteoid osteoma of the hip can be challenging, as demonstrated by long delays in time to initial diagnosis and high rates of misdiagnoses which can lead to inappropriate interventions. • Familiarity with the spectrum of imaging features of OO, especially on MRI, is imperative given the increase in the utilization of this modality for the evaluation of young patients with hip pain and FAI. • Consideration of OO in the differential diagnosis of hip pain in adolescent patients and awareness of the characteristic imaging findings, including bone marrow edema and the utility of CT, are critical for making a timely and accurate diagnosis.

Femur-First Technique for Mobile Bearing Unicompartmental Knee Arthroplasty Results in Decreased Implant Variability and Early Improvements in Function and Survivorship.

BACKGROUND: Higher failure rates of unicompartmental knee arthroplasty (UKA) are seen with lower surgical volume. Surgical techniques that introduce less variability improving implant positioning may lead to improved survivorship. A femur-first (FF) technique has been described, but survivorship data compared to traditional tibia-first (TF) technique are under-reported. We report the results of mobile-bearing UKA using the FF technique compared to the TF technique with emphasis on implant position and survivorship. METHODS: A total of 430 UKAs were performed by a single surgeon between 2007 and 2020. After 2012, there were 141 consecutive UKAs performed with the FF technique which were compared with 147 consecutive UKAs prior. Mean follow-up was 6 years (range, 2 to 13 years), average age was 63 years (range, 23 to 92 years), and there were 132 women. Postoperative radiographs were reviewed to determine implant positioning. Survivorship analyses were performed using Kaplan-Meier curves. RESULTS: The FF resulted in significantly thinner polyethylene (3.4 ± 0.7 mm versus 3.7 ± 0.9 mm) (P = .002) and 4 mm or less bearing thickness in 94% of cases. At 5 years, there was an early trend toward improved survivorship free from component revision (98% for the FF group and 94% for the TF [P = .35]). The FF cohort had higher Knee Society Functional scores at final follow-up (P < .001). CONCLUSION: Compared to traditional TF technique, the FF was more bone-preserving and improved radiographic positioning. The FF technique is an alternative method for mobile-bearing UKA and was associated with an improvement in implant survivorship and function.

Radiographic Accuracy of Malseated Dual-Mobility Liners Varies Based on Implant Design.

BACKGROUND: Dual-mobility constructs have gained popularity to mitigate dislocations after high-risk primary and revision total hip arthroplasties. Contemporary data have indicated that malseating of modular dual-mobility liners occurs in up to 6% of cases. The purpose of this cadaveric-based radiographic study was to determine the ability to accurately determine if modular dual-mobility liners were seated. METHODS: There were 10 hips (5 cadaveric pelvic specimens) used to implant modular dual-mobility liners of 2 designs. One had a liner that seated flush and the other had an extended rim. There were 20 constructs that were well-seated and 20 constructs were intentionally malseated. A comprehensive series of radiographs was reviewed by 2 blinded surgeons. Statistical analyses included Chi-squared testing, logistic regressions, and kappa statistics. RESULTS: Radiographic assessment of liner malseating was not accurate with an elevated rim design with misdiagnosis in 40% (16 of 40). The flush design had diagnostic errors in 5% (2 of 40; P = .0002). Logistic regressions demonstrated a significantly higher risk of misdiagnosing a malseated liner in the elevated rim group (odds ratio 13). There were 12 of 16 misdiagnoses in the elevated rim group failing to recognize a malseated liner. Each surgeon had almost perfect agreement for intraobserver reliability for flush designs (k 0.90) and fair agreement in the elevated rim design (k 0.35). CONCLUSION: A comprehensive series of plain radiographs can reliably detect a malseated modular dual-mobility liner with a flush rim design in 95% of cases. However, elevated rim designs are more difficult to accurately identify malseating on plain radiographs.

Can Selected Use of Cemented and Uncemented Femoral Components in a Broad Population Produce Comparable Results Following Primary Total Hip Arthroplasty for Osteoarthritis?

BACKGROUND: Registry data have demonstrated lower rates of revision and periprosthetic fracture in select cohorts with cemented femoral fixation at primary total hip arthroplasty. Whether this is true of all component designs is not known. We hypothesized that selected use of ream-and-broach triple-tapered uncemented stem designs may provide comparable results to cemented stems. METHODS: From 2000 to 2018, 5,809 primary total hip arthroplasties were performed with either a cemented (1,304) or ream-and-broach triple-tapered uncemented stem (4,505). Implant choice was at surgeon discretion. The cemented group was older, more often women, and had slightly lower body mass index. A subgroup analysis was performed on patients ≥75 years of age. Statistical weighting accounted for baseline cohort differences. RESULTS: At 10 years, there was a trend toward higher all-cause revision (hazards ratio (HR) 1.6, P = .053) and higher all-cause reoperation (HR 1.6, P = .02) in the cemented fixation cohort. The cemented fixation group had fewer intraoperative periprosthetic fractures (HR 0.21, P < .001) but no difference in postoperative fractures (HR 0.99, P = .96). The same was true in patients ≥75 years. In the ≥75-years subgroup, there was no difference in revision or reoperation at 10 years. CONCLUSION: Compared to cemented stems, the use of ream-and-broach triple-tapered uncemented stems in select patients, including those ≥75 years, was associated with more intraoperative fractures but no difference in 10-year implant survivorship. These findings are different than some registry data and suggest that specific uncemented components, implanted in selected patients by experienced surgeons, can perform as well as cemented implants in a broad patient population.

Frank Stinchfield Award: Creation of a Patient-Specific Total Hip Arthroplasty Periprosthetic Fracture Risk Calculator.

BACKGROUND: Many risk factors have been described for periprosthetic femur fracture (PPFFx) following total hip arthroplasty (THA), yet a patient-specific risk assessment tool remains elusive. The purpose of this study was to develop a high-dimensional, patient-specific risk-stratification nomogram that allows dynamic risk modification based on operative decisions. METHODS: We evaluated 16,696 primary nononcologic THAs performed between 1998 and 2018. During a mean 6-year follow-up, 558 patients (3.3%) sustained a PPFFx. Patients were characterized by individual natural language processing-assisted chart review on nonmodifiable factors (demographics, THA indication, and comorbidities), and modifiable operative decisions (femoral fixation [cemented/uncemented], surgical approach [direct anterior, lateral, and posterior], and implant type [collared/collarless]). Multivariable Cox regression models and nomograms were developed with PPFFx as a binary outcome at 90 days, 1 year, and 5 years, postoperatively. RESULTS: Patient-specific PPFFx risk based on comorbid profile was wide-ranging from 0.4-18% at 90 days, 0.4%-20% at 1 year, and 0.5%-25% at 5 years. Among 18 evaluated patient factors, 7 were retained in multivariable analyses. The 4 significant nonmodifiable factors included the following: women (hazard ratio (HR) = 1.6), older age (HR = 1.2 per 10 years), diagnosis of osteoporosis or use of osteoporosis medications (HR = 1.7), and indication for surgery other than osteoarthritis (HR = 2.2 for fracture, HR = 1.8 for inflammatory arthritis, HR = 1.7 for osteonecrosis). The 3 modifiable surgical factors were included as follows: uncemented femoral fixation (HR = 2.5), collarless femoral implants (HR = 1.3), and surgical approach other than direct anterior (lateral HR = 2.9, posterior HR = 1.9). CONCLUSION: This patient-specific PPFFx risk calculator demonstrated a wide-ranging risk based on comorbid profile and enables surgeons to quantify risk mitigation based on operative decisions. LEVEL OF EVIDENCE: Level III, Prognostic.

Comparative Survival of Contemporary Cementless Acetabular Components Following Revision Total Hip Arthroplasty.

BACKGROUND: The advent of highly porous ingrowth surfaces and highly crosslinked polyethylene has been expected to improve implant survivorship in revision total hip arthroplasty. Therefore, we sought to evaluate the survival of several contemporary acetabular designs following revision total hip arthroplasty. METHODS: Acetabular revisions performed from 2000 to 2019 were identified from our institutional total joint registry. We studied 3,348 revision hips, implanted with 1 of 7 cementless acetabular designs. These were paired with highly crosslinked polyethylene or dual-mobility liners. A historical series of 258 Harris-Galante-1 components, paired with conventional polyethylene, was used as reference. Survivorship analyses were performed. For the 2,976 hips with minimum 2-year follow-up, the median follow-up was 8 years (range, 2 to 35 years). RESULTS: Contemporary components with adequate follow-up had survivorship free of acetabular rerevision of ≥95% at 10-year follow-up. Relative to Harris-Galante-1 components, 10-year survivorship free of all-cause acetabular cup rerevision was significantly higher in Zimmer Trabecular Metarevision (hazard ratio (HR) 0.3, 95% confidence interval (CI) 0.2-0.45), Zimmer Trabecular MetaModular (HR 0.34, 95% CI 0.13-0.89), Zimmer Trilogy (HR 0.4, 95% CI 0.24-0.69), DePuy Pinnacle Porocoat (HR 0.24, 95% CI 0.11-0.51), and Stryker Tritanium revision (HR 0.46, 95% CI 0.24-0.91) shells. Among contemporary components, there were only 23 rerevisions for acetabular aseptic loosening and no rerevisions for polyethylene wear. CONCLUSION: Contemporary acetabular ingrowth and bearing surfaces were associated with no rerevisions for wear and aseptic loosening was uncommon, particularly with highly porous designs. Therefore, it appears that contemporary revision acetabular components have dramatically improved upon historical results at available follow-up.

Minimum 10-Year Survivorship of Mobile-Bearing Unicompartmental Arthroplasty: Single Surgeon, North American Non-Designer Consecutive Series.

BACKGROUND: Mobile-bearing unicompartmental knee arthroplasty (UKA) provides a durable option for the surgical treatment of monocompartmental knee arthritis. Despite its availability in the United States since 2004, there is only 1 published North American series reporting on the minimum 10-year results of mobile-bearing UKA. The purpose of this study is to determine the survivorship, reasons for failure, and patient-reported outcomes of the Oxford mobile-bearing UKA at minimum 10-year follow-up. METHODS: One hundred fifty-seven knees were eligible for inclusion in this study based on the date of their index surgery allowing for a minimum 10-year follow-up. The mean follow-up from implantation was 11.4 years (range 10.0-13.8). Failures were reviewed for potential etiologic factors. Survivorship free of reoperation for any reason and free of revision was determined using Kaplan-Meier curves. Functional outcomes were assessed using the Knee Society Knee and Function scores. RESULTS: There were 17 revisions (10.6%). Six were secondary to progression of lateral compartment arthritis, 5 for persistent pain, 3 for femoral component aseptic loosening, 2 polyethylene dislocations, and 1 deep infection. The mean time to revision was 4 years (range 0.1-11). The survivorship free from revision at minimum 10-year follow-up was 85%. At final follow-up, the mean Knee Society Knee Score was 93 (range 66-100) and the mean functional score was 80 (range 30-100). CONCLUSION: This single surgeon series demonstrated a survivorship of 85% at minimum 10-year follow-up. These results are comparable to published data from North America, but survivorship is lower than European series.

Collarless Taper Slip and Collared Composite Beam Stems Differ in Failure Modes and Reoperation Rates.

BACKGROUND: Cemented femoral components are used in older patients based on lower risk of periprosthetic fracture and implant loosening. This study reports the survivorship free of periprosthetic femoral fracture (PPFX), femoral loosening, all-cause revision, and reoperation between 2 philosophies of cemented stems. METHODS: In total, 1,306 primary hybrid total hip arthroplasties were performed for osteoarthritis between 2000 and 2018 in a retrospective single center study. Cemented stems included 798 EON composite beam (CB) and 508 Exeter collarless taper slip (CTS) stems. Mean age was 77 years. An inverse treated probability weighted model was utilized to control for risk factors including age, gender, body mass index, year, and surgeon. RESULTS: There was no difference in risk of PPFX at 10 years (CTS 9% vs CB 5%; hazard ratio [HR] 1.4, P = .47). There was an increased risk of intraoperative fractures requiring fixation in the CB cohort (7/798 [5 calcar, 2 greater trochanter] vs 0/508, P < .001), while there was an increased risk of Vancouver B2 PPFX in the CTS cohort (7/508 vs 0/798; P < 001). There was a higher risk of femoral loosening in the CB cohort (6/798 vs 0/508; P < .0001). Higher survivorship free of revision (98% vs 91%; HR 4, P = .001) and free of reoperation (96% vs 88%; HR 2.5, P = .002) was seen at 10 years in the CB cohort. CONCLUSION: The risk of PPFX requiring implant revision was increased in the CTS cohort, while there was an increased risk of femoral component loosening and intraoperative fractures seen in the CB cohort. Surgeons should be aware of the different failure modes when choosing implant design for their patient.

Diagnosis and Treatment of Femoral Head Osteonecrosis: A Protocol for Development of Evidence-Based Clinical Practice Guidelines.

INTRODUCTION: There are many treatment options for patients who have osteonecrosis of the femoral head (ONFH) and management strategies vary widely both among and within individual countries. Although many researchers have attempted to elucidate the optimal strategies for managing this disease, the lack of large-scale randomized control trials and the lack of agreement on disease staging have curtailed the development of clear-cut guidelines. MATERIALS AND METHODS: The Association Research Circulation Osseous (ARCO) group sought to address three questions for the management of patients who have ONFH: 1) What imaging studies are most sensitive and specific for the diagnostic evaluation of patients who have ONFH?; 2) What is the best treatment strategy for preventing disease progression in patients who have pre-collapse lesions?; and 3) What is the best treatment strategy for patients who have post-collapse disease? The Patient, Intervention, Comparison, and Outcome (PICO) format was used to formulate the search strategy for each research question. A systematic review will be performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. ARCO participants have been allocated to three groups, each representing one of the PICO questions. After qualitative and quantitative analysis of the data extracted from studies pertaining to each of the three research questions, a set of evidence-based clinical practice guidelines will be proposed for the management of patients who have ONFH. DISCUSSION: It is not always clear which treatment method is optimal for the management of ONFH. Thus, many surgeons have developed and performed various procedures based on patient-specific factors. As there is no consensus on the optimal treatment for various stages of disease, it was clear that developing evidence-based clinical practice guidelines would provide more structure and uniformity to management of these patients. Therefore, the results of this systematic review will lead to the development guidelines that may improve patient-care strategies and result in better outcomes for patients who have ONFH.

Tripolar Articulations as a "High Stability Bearing" for Revision Total Hip Arthroplasty: Success Rates and Risk Factors for Failure.

BACKGROUND: Unconstrained tripolar articulations have been theorized to increase hip stability. The purpose of this study is to report the performance of tripolar articulations in revision THA and identify factors associated with success and failure. METHODS: Between 1994 and 2016, 67 revision THAs were performed with an unconstrained tripolar articulation. Mean follow-up was 5.4 years. Patient charts were retrospectively reviewed emphasizing factors associated with risk of instability. There were 21 patients with neither a history of instability (HI) nor abductor insufficiency (AI), 20 patients with HI alone, 13 with AI alone, and 13 had both HI and AI. RESULTS: Twelve THAs sustained at least one postrevision dislocation at an average of 2.1 years. One bipolar dissociation occurred early (1.2 y). Nine hips had a re-revision to address these complications. Survival free from dislocation at 2, 5, and 10 years was 88%, 85%, and 74%, respectively. Survival free from re-revision at 2, 5, and 10 years was 91%, 84%, and 65%, respectively. Patients with combined AI and HI had the worst survivorship free from dislocation at 2, 5, and 10 years (77%, 68%, and 55%), respectively. In contrast, patients with neither HI nor AI experienced zero dislocations. There were no failures associated with bearing wear. CONCLUSION: Off-the-shelf tripolar articulations were associated with reasonable survival at midterm follow-up. In patients with both AI and HI, the risks and benefits of alternative options such as dual mobility or constrained liners should be explored as the risk of dislocation at 10 years approached 50%.

Total Hip Arthroplasty in Patients With Osteogenesis Imperfecta.

BACKGROUND: Osteogenesis imperfecta (OI) comprises a spectrum of disorders that result in bone fragility. This presents unique challenges when performing total joint arthroplasty in patients with OI. The purpose of this study is to determine the survivorship and clinical outcomes of total hip arthroplasty (THA) in patients with OI. METHODS: We retrospectively reviewed our institution's total joint registry from 1969 to 2018 for all primary THAs in patients with a history of OI. There were 11 patients (13 hips) with a mean follow-up of 13 years (range 6-20). Survivorship free of component revision was determined using Kaplan-Meier analysis. Patient-reported clinical outcomes were assessed using Harris Hip Scores. RESULTS: At final follow-up, the status of the implant was known in all 13 hips. One patient (1 hip) was deceased. Four hips (31%) underwent revision surgery at a mean of 9 years (range 5-17). Survivorship free of component revision was 52% at 20 years. Mean Harris Hip Scores at final follow-up were fair (75, 47-97), but significantly improved compared to available preoperative scores (P = .0015). No intraoperative complications occurred during the 13 primary THAs. CONCLUSION: THA in patients with OI is associated with high revision rates and low survivorship at long-term follow-up. Although this is a very challenging patient population, THA provided these patients with improved functional outcomes. To the authors' knowledge, this is the largest series of primary THA in patients with OI reported in the literature and therefore provides surgeons with important data regarding the expected outcomes following THA in this unique patient population. LEVEL OF EVIDENCE: Level IV.

Survey of AAHKS International Members on the Impact of COVID-19 on Hip and Knee Arthroplasty Practices.

BACKGROUND: Coronavirus disease 2019 (COVID-19) pandemic poses an important risk to global health. METHODS: This study surveyed 370 international orthopedic surgeons affiliated with the American Association of Hip and Knee Surgeons to help identify the global impact of the COVID-19 pandemic on patient care. RESULTS: A total of 99 surgeons (27% of those surveyed) completed the questionnaire representing 32 different countries. Except for surgeons in Japan, all respondents noted that their practice had been affected to some degree and 70% of the surgeons have canceled elective procedures. More than a third of the surgeons have had to close their practices altogether and the remaining open practices were estimated to be sustainable for 7 weeks on average given their current situation. CONCLUSION: The COVID-19 pandemic has resulted in marked changes to the majority of international arthroplasty practices.