The resin-matrix cement layer thickness resultant from the intracanal fitting of teeth root canal posts: an integrative review.

OBJECTIVE: The aim of this study was to perform an integrative review on the layer thickness and microstructure of resin-matrix cements around custom-made or standard teeth root intracanal posts. MATERIALS AND METHODS: An electronic search was conducted on the PubMed using a combination of the following scientific terms: intraradicular post, root intracanal post, resin cement, thickness, adaptation, endodontic post, layer thickness, fit, shape, and endodontic core. The literature selection criteria accepted articles published in the English language, up to May 2021, involving in vitro analyses, meta-analyses, randomized controlled trials, and prospective cohort studies. RESULTS: The search identified 154 studies, of which 24 were considered relevant to this study. The selected studies provided important data considering cement layer thickness, tooth preparation, endodontic post, and type of resin-matrix cement. The anatomical variability of root canal systems, such as the oval- or C-shaped, represents a challenge in dental restoration with tooth root intracanal posts. The fitting of intracanal posts to different root regions is variable resulting in thick and irregular layers of resin-matrix cement. Defects like pores, micro-cracks, and micro-gaps were detected in the resin-matrix cement microstructure and represent spots of stress concentration and fracture. Custom-made tooth root intracanal posts provide a proper fitting and decrease the layer thickness of resin-matrix cement. CONCLUSIONS: In fact, the layer thickness of resin-matrix cements depends on the fitting of endodontic posts to tooth root canals. An increase of resin cement thickness causes the appearance of defects like pores, micro-cracks, and micro-gaps that can induce stress concentration and fractures at interfaces. CLINICAL RELEVANCE: The fitting of the endodontic post into the teeth root canal determine the layer thickness of the resin-matrix cement to establish an adequate retention. However, the increase in the thickness of the resin-matrix cement layer can lead to a high number of defects like pores or cracks and therefore decrease the strength of the interface.

Accurate peptide fragmentation predictions allow data driven approaches to replace and improve upon proteomics search engine scoring functions.

MOTIVATION: The use of post-processing tools to maximize the information gained from a proteomics search engine is widely accepted and used by the community, with the most notable example being Percolator-a semi-supervised machine learning model which learns a new scoring function for a given dataset. The usage of such tools is however bound to the search engine's scoring scheme, which doesn't always make full use of the intensity information present in a spectrum. We aim to show how this tool can be applied in such a way that maximizes the use of spectrum intensity information by leveraging another machine learning-based tool, MS2PIP. MS2PIP predicts fragment ion peak intensities. RESULTS: We show how comparing predicted intensities to annotated experimental spectra by calculating direct similarity metrics provides enough information for a tool such as Percolator to accurately separate two classes of peptide-to-spectrum matches. This approach allows using more information out of the data (compared with simpler intensity based metrics, like peak counting or explained intensities summing) while maintaining control of statistics such as the false discovery rate. AVAILABILITY AND IMPLEMENTATION: All of the code is available online at https://github.com/compomics/ms2rescore. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

All-optical measurement of the complete waveform of octave-spanning ultrashort light pulses.

We demonstrate the complete temporal characterization of the optical waveform of visible near-infrared octave-spanning ultrashort laser pulses, using an all-optical, all-solid-state, and fully inline dispersion-scan device based only on second-harmonic generation.

Data-Driven Rescoring of Metabolite Annotations Significantly Improves Sensitivity.

When analyzing mass spectrometry imaging data sets, assigning a molecule to each of the thousands of generated images is a very complex task. Recent efforts have taken lessons from (tandem) mass spectrometry proteomics and applied them to imaging mass spectrometry metabolomics, with good results. Our goal is to go a step further in this direction and apply a well established, data-driven method to improve the results obtained from an annotation engine. By using a data-driven rescoring strategy, we are able to consistently improve the sensitivity of the annotation engine while maintaining control of statistics like estimated rate of false discoveries. All the code necessary to run a search and extract the additional features can be found at https://github.com/anasilviacs/sm-engine and to rescore the results from a search in https://github.com/anasilviacs/rescore-metabolites .

Open-Source, Platform-Independent Library and Online Scripting Environment for Accessing Thermo Scientific RAW Files.

Mass spectrometers typically output data in proprietary binary formats. While converter suites and standardized XML formats have been developed in response, these conversion steps come with non-negligible computational time and storage space overhead. As a result, simple, everyday data inspection tasks are often beyond the skills of the mass spectrometrist, who is unable to freely access the acquired data. We therefore here describe the unthermo library for convenient, platform-independent access to Thermo Scientific RAW files and the associated online playground to transform small and easily understandable scriptlets into executable programs for end-users. By fostering the provision of code examples and snippet exchange, the interested mass spectrometrist or researcher can use this playground to quickly assemble custom scripts for their particular purpose. In this way, the data in these RAW files can be mined much more readily and directly by the user, and fast, automated raw data extraction or analysis can finally become part of the daily routine of the mass spectrometrist.

Low-cost wearable data acquisition for stroke rehabilitation: a proof-of-concept study on accelerometry for functional task assessment.

BACKGROUND: An increasingly aging society and consequently rising number of patients with poststroke-related neurological dysfunctions are forcing the rehabilitation field to adapt to ever-growing demands. Although clinical reasoning within rehabilitation is dependent on patient movement performance analysis, current strategies for monitoring rehabilitation progress are based on subjective time-consuming assessment scales, not often applied. Therefore, a need exists for efficient nonsubjective monitoring methods. Wearable monitoring devices are rapidly becoming a recognized option in rehabilitation for quantitative measures. Developments in sensors, embedded technology, and smart textile are driving rehabilitation to adopt an objective, seamless, efficient, and cost-effective delivery system. This study aims to assist physiotherapists' clinical reasoning process through the incorporation of accelerometers as part of an electronic data acquisition system. METHODS: A simple, low-cost, wearable device for poststroke rehabilitation progress monitoring was developed based on commercially available inertial sensors. Accelerometry data acquisition was performed for 4 first-time poststroke patients during a reach-press-return task. RESULTS: Preliminary studies revealed acceleration profiles of stroke patients through which it is possible to quantitatively assess the functional movement, identify compensatory strategies, and help define proper movement. CONCLUSION: An inertial data acquisition system was designed and developed as a low-cost option for monitoring rehabilitation. The device seeks to ease the data-gathering process by physiotherapists to complement current practices with accelerometry profiles and aid the development of quantifiable methodologies and protocols.

Magneto-Enzymatic Microgels for Precise Hydrogel Sculpturing.

The inclusion of hollow channels in tissue-engineered hydrogels is crucial for mimicking the natural physiological conditions and facilitating the delivery of nutrients and oxygen to cells. Although bio-fabrication techniques provide diverse strategies to create these channels, many require sophisticated equipment and time-consuming protocols. Herein, collagenase, a degrading agent for methacrylated gelatin hydrogels, and magnetic nanoparticles (MNPs) are combined and processed into enzymatically active spherical structures using a straightforward oil bath emulsion methodology. The generated microgels are then used to microfabricate channels within biomimetic hydrogels via a novel sculpturing approach that relied on the precise coupling of protein-enzyme pairs (for controlled local degradation) and magnetic actuation (for directional control). Results show that the sculpting velocity can be tailored by adjusting the magnetic field intensity or concentration of MNPs within the microgels. Additionally, varying the magnetic field position or microgel size generated diverse trajectories and channels of different widths. This innovative technology improves the viability of encapsulated cells through enhanced medium transport, outperforming non-sculpted hydrogels and offering new perspectives for hydrogel vascularization and drug/biomolecule administration. Ultimately, this novel concept can help design fully controlled channels in hydrogels or soft materials, even those with complex tortuosity, in a single wireless top-down biocompatible step.

Human Chorionic Membrane-derived Tunable Hydrogels for Vascular Tissue Engineering Strategies.

One of the foremost targets in the advancement of biomaterials to engineer vascularized tissues is not only to replicate the composition of the intended tissue but also to create thicker structures incorporating a vascular network for adequate nutrients and oxygen supply. For the first time, to the best of current knowledge, a clinically relevant biomaterial is developed, demonstrating that hydrogels made from the human decellularized extracellular matrix can exhibit robust mechanical properties (in the kPa range) and angiogenic capabilities simultaneously. These properties enable the culture and organization of human umbilical vein endothelial cells into tubular structures, maintaining their integrity for 14 days in vitro without the need for additional polymers or angiogenesis-related factors. This is achieved by repurposing the placenta chorionic membrane (CM), a medical waste with an exceptional biochemical composition, into a valuable resource for bioengineering purposes. After decellularization, the CM underwent chemical modification with methacryloyl groups, giving rise to methacrylated CM (CMMA). CMMA preserved key proteins, as well as glycosaminoglycans. The resulting hydrogels rapidly photopolymerize and have enhanced strength and customizable mechanical properties. Furthermore, they demonstrate angio-vasculogenic competence in vitro and in vivo, holding significant promise as a humanized platform for the engineering of vascularized tissues.

Comparison of leafy kale populations from Italy, Portugal, and Turkey for their bioactive compound content: phenolics, glucosinolates, carotenoids, and chlorophylls.

BACKGROUND: Kales are primitive leafy Brassica oleracea L. forms, widespread in local farming systems of several European countries and employed in the preparation of traditional recipes. Kales are also potential sources of healthy bioactive phytochemical components. The present study compared the bioactive compound content of kale populations from Italy, Portugal, and Turkey, either from local sources or grown in an experimental field. RESULTS: Total phenolics, glucosinolates (GLS), carotenoids, and chlorophylls were in the ranges 8310-38 110, 755-8580, 135-2354, and 1740-16,924 mg kg(-1) dry matter, respectively. On average, locally harvested samples showed a total GLS content about twice as high as populations from the experiment. Conversely, pigments were significantly more abundant in experimental than in local kales, owing to the higher soil fertility. Portuguese samples showed higher phenolic and GLS amounts than Italian and Turkish kales, whereas some of the Italian samples were the richest in carotenoids. CONCLUSION: This paper represented the first cross-country comparison of local kale accessions with respect to bioactive compound amounts. Both geographic origin and growing environment appeared to be remarkable and discriminating factors in determining bioactive levels in leafy kales, with possible effects on their health-promoting and sensorial attributes.

Magnetic-Based Strategies for Regenerative Medicine and Tissue Engineering.

The fabrication of biological substitutes to repair, replace, or enhance tissue- and organ-level functions is a long-sought goal of tissue engineering (TE). However, the clinical translation of TE is hindered by several challenges, including the lack of suitable mechanical, chemical, and biological properties in one biomaterial, and the inability to generate large, vascularized tissues with a complex structure of native tissues. Over the past decade, a new generation of "smart" materials has revolutionized the conventional medical field, transforming TE into a more accurate and sophisticated concept. At the vanguard of scientific development, magnetic nanoparticles (MNPs) have garnered extensive attention owing to their significant potential in various biomedical applications owing to their inherent properties such as biocompatibility and rapid remote response to magnetic fields. Therefore, to develop functional tissue replacements, magnetic force-based TE (Mag-TE) has emerged as an alternative to conventional TE strategies, allowing for the fabrication and real-time monitoring of tissues engineered in vitro. This review addresses the recent studies on the use of MNPs for TE, emphasizing the in vitro, in vivo, and clinical applications. Future perspectives of Mag-TE in the fields of TE and regenerative medicine are also discussed.

Dynamical behaviour of ultrathin [CoFeB (tCoFeB)/Pd] films with perpendicular magnetic anisotropy.

CoFeB-based ultrathin films with perpendicular magnetic anisotropy are promising for different emerging technological applications such as nonvolatile memories with low power consumption and high-speed performance. In this work, the dynamical properties of [CoFeB (tCoFeB)/Pd (10 Å)]5 multilayered ultrathin films (1 Å ≤ tCoFeB ≤ 5 Å) are studied by using two complementary methods: time-resolved magneto-optical Kerr effect and broadband ferromagnetic resonance. The perpendicular magnetization is confirmed for multilayers with tCoFeB ≤ 4 Å. The effective perpendicular magnetic anisotropy reaches a clear maximum at tCoFeB = 3 Å. Further increase of CoFeB layer thickness reduces the perpendicular magnetic anisotropy and the magnetization became in-plane oriented for tCoFeB ≥ 5 Å. This behaviour is explained by considering competing contributions from surface and magnetoelastic anisotropies. It was also found that the effective damping parameter αeff decreases with CoFeB layer thickness and for tCoFeB = 4 Å reaches a value of ~ 0.019 that is suitable for microwave applications.

Adjustable conduits for guided peripheral nerve regeneration prepared from bi-zonal unidirectional and multidirectional laminar scaffold of type I collagen.

Shortness of donor nerves has led to the development of nerve conduits that connect sectioned peripheral nerve stumps and help to prevent the formation of neuromas. Often, the standard diameters of these devices cannot be adapted at the time of surgery to the diameter of the nerve injured. In this work, scaffolds were developed to form filled nerve conduits with an inner matrix with unidirectional channels covered by a multidirectional pore zone. Collagen type I dispersions (5 mg/g and 8 mg/g) were sequentially frozen using different methods to obtain six laminar scaffolds (P1 to P5) formed by a unidirectional (U) pore/channel zone adjacent to a multidirectional (M) pore zone. The physicochemical and microstructural properties of the scaffolds were determined and compared, as well as their biodegradability, residual glutaraldehyde and cytocompatibility. Also, the Young's modulus of the conduits made by rolling up the bizonal scaffolds from the unidirectional to the multidirectional zone was determined. Based on these comparisons, the proliferation and differentiation of hASC were assessed only in the P3 scaffolds. The cells adhered, aligned in the same direction as the unidirectional porous fibers, proliferated, and differentiated into Schwann-like cells. Adjustable conduits made with the P3 scaffold were implanted in rats 10 mm sciatic nerve lesions to compare their performance with that of autologous sciatic nerve grafted lesions. The in vivo results demonstrated that the tested conduit can be adapted to the diameter of the nerve stumps to guide their growth and promote their regeneration.

Multi-layer pre-vascularized magnetic cell sheets for bone regeneration.

The lack of effective strategies to produce vascularized 3D bone transplants in vitro, hampers the development of thick-constructed bone, limiting the translational of lab-based engineered system to clinical practices. Cell sheet (CS) engineering techniques provide an excellent microenvironment for vascularization since the technique can maintain the intact cell matrix, crucial for angiogenesis. In an attempt to develop hierarchical vascularized 3D cellular constructs, we herein propose the construction of stratified magnetic responsive heterotypic CSs by making use of iron oxide nanoparticles previously internalized within cells. Magnetic force-based CS engineering allows for the construction of thick cellular multilayers. Results show that osteogenesis is achieved due to a synergic effect of human umbilical vein endothelial cells (HUVECs) and adipose-derived stromal cells (ASCs), even in the absence of osteogenic differentiating factors. Increased ALP activity, matrix mineralization, osteopontin and osteocalcin detection were achieved over a period of 21 days for the heterotypic CS conformation (ASCs/HUVECs/ASCs), over the homotypic one (ASCs/ASCs), corroborating our findings. Moreover, the validated crosstalk between BMP-2 and VEGF releases triggers not only the recruitment of blood vessels, as demonstrated in an in vivo CAM assay, as well as the osteogenesis of the 3D cell construct. The in vivo angiogenic profile also demonstrated preserved human vascular structures and human cells showed the ability to migrate and integrate within the chick vasculature.

Modulation of erythrocyte hemorheological properties by band 3 phosphorylation and dephosphorylation.

The objective of the present work was to study the effects of erythrocyte proteins phosphorylation in erythrocyte aggregation and deformability. Human whole blood samples were incubated in vitro in absent and in presence of the phosphorylation/dephosphorilation band 3 inhibitors and also with adenylyl cyclase, guanylate cyclase and PI3K inhibitors and the erythrocyte aggregation index (AIE) and deformability were assayed. The results show that when band 3 is phosphorylated in presence of a PTP inhibitor an increase in erythrocyte aggregation index is observed (p<0.0001). A partial dephosphorylation band 3 state, induced by PTK inhibitors, show a decrease in the erythrocyte aggregation index (p<0.002). However both manipulated states induced lower EAI values than blood samples aliquots controls. The guanylate cyclase and PI3-K inhibitors significantly decrease the erythrocyte aggregation index in relation with the control blood samples. Erythrocyte deformability in presence of all the inhibitors did not showed significant changes. PTP and PI3-K inhibitors showed a significantly increase in the plasma potassium concentrations not associated with EAI values. Methehemoglobin levels were increased significantly when guanylate cyclase inhibitor is present in the blood samples. In conclusion, the results suggest that erythrocyte aggregation index is dependent of the phosphorylated/dephosphorylated state of band 3.