Modelling and Thermographic Measurements of LED Optical Power.

This paper presents a simple engineering method for evaluating the optical power emitted by light-emitting diodes (LEDs) using infrared thermography. The method is based on the simultaneous measurement of the electrical power and temperature of an LED and a heat source (resistor) that are enclosed in the same plastic packaging under the same cooling conditions. This ensures the calculation of the optical power emitted by the LED regardless of the value of the heat transfer coefficient. The obtained result was confirmed by comparing it with the standard direct measurement method using an integrated sphere. The values of the estimated optical power using the proposed method and the integrated sphere equipped with a spectrometer were consistent with each other. The tested LED exhibited a high optical energy efficiency, reaching approximately η ≈ 30%. In addition, an uncertainty analysis of the obtained results was performed. Compact modelling based on a thermal resistor network (Rth) and a 3D-FEM analysis were performed to confirm the experimental results.

Thermal Time Constant CNN-Based Spectrometry for Biomedical Applications.

This paper presents a novel method based on a convolutional neural network to recover thermal time constants from a temperature-time curve after thermal excitation. The thermal time constants are then used to detect the pathological states of the skin. The thermal system is modeled as a Foster Network consisting of R-C thermal elements. Each component is represented by a time constant and an amplitude that can be retrieved using the deep learning system. The presented method was verified on artificially generated training data and then tested on real, measured thermographic signals from a patient suffering from psoriasis. The results show proper estimation both in time constants and in temperature evaluation over time. The error of the recovered time constants is below 1% for noiseless input data, and it does not exceed 5% for noisy signals.

Skin Lesion Detection Algorithms in Whole Body Images.

Melanoma is one of the most lethal and rapidly growing cancers, causing many deaths each year. This cancer can be treated effectively if it is detected quickly. For this reason, many algorithms and systems have been developed to support automatic or semiautomatic detection of neoplastic skin lesions based on the analysis of optical images of individual moles. Recently, full-body systems have gained attention because they enable the analysis of the patient's entire body based on a set of photos. This paper presents a prototype of such a system, focusing mainly on assessing the effectiveness of algorithms developed for the detection and segmentation of lesions. Three detection algorithms (and their fusion) were analyzed, one implementing deep learning methods and two classic approaches, using local brightness distribution and a correlation method. For fusion of algorithms, detection sensitivity = 0.95 and precision = 0.94 were obtained. Moreover, the values of the selected geometric parameters of segmented lesions were calculated and compared for all algorithms. The obtained results showed a high accuracy of the evaluated parameters (error of area estimation <10%), especially for lesions with dimensions greater than 3 mm, which are the most suspected of being neoplastic lesions.

Artificial intelligence in the detection of skin cancer: State of the art.

The incidence of melanoma is increasing rapidly. This cancer has a good prognosis if detected early. For this reason, various systems of skin lesion image analysis, which support imaging diagnostics of this neoplasm, are developing very dynamically. To detect and recognize neoplastic lesions, such systems use various artificial intelligence (AI) algorithms. This area of computer science applications has recently undergone dynamic development, abounding in several solutions that are effective tools supporting diagnosticians in many medical specialties. In this contribution, a number of applications of different classes of AI algorithms for the detection of this skin melanoma are presented and evaluated. Both classic systems based on the analysis of dermatoscopic images as well as total body systems, enabling the analysis of the patient's whole body to detect moles and pathologic changes, are discussed. These increasingly popular applications that allow the analysis of lesion images using smartphones are also described. The quantitative evaluation of the discussed systems with particular emphasis on the method of validation of the implemented algorithms is presented. The advantages and limitations of AI in the analysis of lesion images are also discussed, and problems requiring a solution for more effective use of AI in dermatology are identified.