RESUMEN
Over the past decades, tactile sensing technology has made significant advances in the fields of health monitoring and robotics. Compared to conventional sensors, self-powered tactile sensors do not require an external power source to drive, which makes the entire system more flexible and lightweight. Therefore, they are excellent candidates for mimicking the tactile perception functions for wearable health monitoring and ideal electronic skin (e-skin) for intelligent robots. Herein, the working principles, materials, and device fabrication strategies of various self-powered tactile sensing platforms are introduced first. Then their applications in health monitoring and robotics are presented. Finally, the future prospects of self-powered tactile sensing systems are discussed.
RESUMEN
Due to their potential applications in physiological monitoring, diagnosis, human prosthetics, haptic perception, and human-machine interaction, flexible tactile sensors have attracted wide research interest in recent years. Thanks to the advances in material engineering, high performance flexible tactile sensors have been obtained. Among the representative pressure sensing materials, 2D layered nanomaterials have many properties that are superior to those of bulk nanomaterials and are more suitable for high performance flexible sensors. As a class of 2D inorganic compounds in materials science, MXene has excellent electrical, mechanical, and biological compatibility. MXene-based composites have proven to be promising candidates for flexible tactile sensors due to their excellent stretchability and metallic conductivity. Therefore, great efforts have been devoted to the development of MXene-based composites for flexible sensor applications. In this paper, the controllable preparation and characterization of MXene are introduced. Then, the recent progresses on fabrication strategies, operating mechanisms, and device performance of MXene composite-based flexible tactile sensors, including flexible piezoresistive sensors, capacitive sensors, piezoelectric sensors, triboelectric sensors are reviewed. After that, the applications of MXene material-based flexible electronics in human motion monitoring, healthcare, prosthetics, and artificial intelligence are discussed. Finally, the challenges and perspectives for MXene-based tactile sensors are summarized.
Asunto(s)
Inteligencia Artificial , Estereognosis , Humanos , Conductividad Eléctrica , ElectricidadRESUMEN
Flexible sensors are the essential foundations of pressure sensing, microcomputer sensing systems, and wearable devices. The flexible tactile sensor can sense stimuli by converting external forces into electrical signals. The electrical signals are transmitted to a computer processing system for analysis, realizing real-time health monitoring and human motion detection. According to the working mechanism, tactile sensors are mainly divided into four types-piezoresistive, capacitive, piezoelectric, and triboelectric tactile sensors. Conventional silicon-based tactile sensors are often inadequate for flexible electronics due to their limited mechanical flexibility. In comparison, polymeric nanocomposites are flexible and stretchable, which makes them excellent candidates for flexible and wearable tactile sensors. Among the promising polymers, conjugated polymers (CPs), due to their unique chemical structures and electronic properties that contribute to their high electrical and mechanical conductivity, show great potential for flexible sensors and wearable devices. In this paper, we first introduce the parameters of pressure sensors. Then, we describe the operating principles of resistive, capacitive, piezoelectric, and triboelectric sensors, and review the pressure sensors based on conjugated polymer nanocomposites that were reported in recent years. After that, we introduce the performance characteristics of flexible sensors, regarding their applications in healthcare, human motion monitoring, electronic skin, wearable devices, and artificial intelligence. In addition, we summarize and compare the performances of conjugated polymer nanocomposite-based pressure sensors that were reported in recent years. Finally, we summarize the challenges and future directions of conjugated polymer nanocomposite-based sensors.
Asunto(s)
Nanocompuestos , Dispositivos Electrónicos Vestibles , Humanos , Polímeros , Inteligencia Artificial , Nanocompuestos/química , TactoRESUMEN
On-site monitoring of heavy metals in drinking water has become crucial because of several high profile instances of contamination. Presently, reliable techniques for trace level heavy metal detection are mostly laboratory based, while the detection limits of contemporary field-based methods are barely meeting the exposure limits set by regulatory bodies such as the World Health Organization (WHO). Here, we show an on-site deployable, Pb2+ sensor on a dual-gated transistor platform whose lower detection limit is 2 orders of magnitude better than the traditional sensor and 1 order of magnitude lower than the exposure limit set by WHO. The enhanced sensitivity of our design is verified by numerically solving PNP (Planck-Nernst-Poisson) model. We demonstrate that the enhanced sensitivity is due to the suppression of ionic flux. The simplicity and the robustness of the design make it applicable for on-site screening, thereby facilitating rapid response to contamination events.
Asunto(s)
Agua Potable/química , Plomo/análisis , Iones , Límite de Detección , Metales Pesados/análisis , Contaminantes Químicos del Agua/análisisRESUMEN
Intrinsic Ge nanowires (NWs) with a Ge core covered by a thick Ge oxide shell are utilized to achieve nanoscale field-effect transistor nonvolatile memories, which show a large memory window and a high ON/OFF ratio with good retention. The retainable surface charge trapping is considered to be responsible for the memory effect, and the Ge oxide shell plays a key role as the insulating tunneling dielectric which must be thick enough to prevent stored surface charges from leaking out. Annealing the device in air is demonstrated to be a simple and effective way to attain thick Ge oxide on the Ge NW surface, and the Ge-NW-based memory corresponding to thick Ge oxide exhibits a much better retention capability compared with the case of thin Ge oxide.
RESUMEN
With the arrival of the Internet of Things era, the demand for tactile sensors continues to grow. However, traditional sensors mostly require an external power supply to meet real-time monitoring, which brings many drawbacks such as short service life, environmental pollution, and difficulty in replacement, which greatly limits their practical applications. Therefore, the development of a passive self-power supply of tactile sensors has become a research hotspot in academia and the industry. In this review, the development of self-powered tactile sensors in the past several years is introduced and discussed. First, the sensing principle of self-powered tactile sensors is introduced. After that, the main performance parameters of the tactile sensors are briefly discussed. Finally, the potential application prospects of the tactile sensors are discussed in detail.
RESUMEN
The research found that after doping with rare earth elements, a large number of electrons and holes will be produced on the surface of AlN, which makes the material have the characteristics of spontaneous polarization. A new type of ferroelectric material has made a new breakthrough in the application of nitride-materials in the field of integrated devices. In this paper, the application prospects and development trends of ferroelectric material ScAlN in memristors are reviewed. Firstly, various fabrication processes and structures of the current ScAlN thin films are described in detail to explore the implementation of their applications in synaptic devices. Secondly, a series of electrical properties of ScAlN films, such as the current switching ratio and long-term cycle durability, were tested to explore whether their electrical properties could meet the basic needs of memristor device materials. Finally, a series of summaries on the current research studies of ScAlN thin films in the synaptic simulation are made, and the working state of ScAlN thin films as a synaptic device is observed. The results show that the ScAlN ferroelectric material has high residual polarization, no wake-up function, excellent stability and obvious STDP behavior, which indicates that the modified material has wide application prospects in the research and development of memristors.
RESUMEN
Metal-organic frameworks (MOFs) have attained broad research attention in the areas of sensors, resistive memories, and optoelectronic synapses on the merits of their intriguing physical and chemical properties. In this review, recent progress on the synthesis of MOFs and their electronic applications is introduced and discussed. Initially, the crystal structures and properties of MOFs encompassing optical, electrical, and chemical properties are discussed in brief. Subsequently, advanced synthesis methods for MOFs are introduced, categorized into hydrothermal approach, microwave synthesis, mechanochemical synthesis, and electrochemical deposition. After that, the various roles of MOFs in widespread applications, including sensing, information storage, optoelectronic synapses, machine learning, and artificial intelligence, are discussed, highlighting their versatility and the innovative solutions they provide to long-standing challenges. Finally, an outlook on remaining challenges and a future perspective for MOFs are proposed.
RESUMEN
Today's computing systems, to meet the enormous demands of information processing, have driven the development of brain-inspired neuromorphic systems. However, there are relatively few optoelectronic devices in most brain-inspired neuromorphic systems that can simultaneously regulate the conductivity through both optical and electrical signals. In this work, the Au/MXene/Y:HfO2/FTO ferroelectric memristor as an optoelectronic artificial synaptic device exhibited both digital and analog resistance switching (RS) behaviors under different voltages with a good switching ratio (>103). Under optoelectronic conditions, optimal weight update parameters and an enhanced algorithm achieved 97.1% recognition accuracy in convolutional neural networks. A new logic gate circuit specifically designed for optoelectronic inputs was established. Furthermore, the device integrates the impact of relative humidity to develop an innovative three-person voting mechanism with a veto power. These results provide a feasible approach for integrating optoelectronic artificial synapses with logic-based computing devices.
RESUMEN
In recent years, extensive research has been conducted on the development of high-performance flexible tactile sensors, pursuing the next generation of highly intelligent electronics with diverse potential applications in self-powered wearable sensors, human-machine interactions, electronic skin, and soft robotics. Among the most promising materials that have emerged in this context are functional polymer composites (FPCs), which exhibit exceptional mechanical and electrical properties, enabling them to be excellent candidates for tactile sensors. Herein, this review provides a comprehensive overview of recent advances in FPCs-based tactile sensors, including the fundamental principle, the necessary property parameter, the unique device structure, and the fabrication process of different types of tactile sensors. Examples of FPCs are elaborated with a focus on miniaturization, self-healing, self-cleaning, integration, biodegradation, and neural control. Furthermore, the applications of FPC-based tactile sensors in tactile perception, human-machine interaction, and healthcare are further described. Finally, the existing limitations and technical challenges for FPCs-based tactile sensors are briefly discussed, offering potential avenues for the development of electronic products.
RESUMEN
Pressure sensors show significant potential applications in health monitoring, bio-sensing, electronic skin, and tactile perception. Consequently, tremendous research interest has been devoted to the development of high-performance pressure sensors. In this paper, recent progress on the polymer composite-based flexible pressure sensor is reviewed. The parameters of pressure sensors, including sensitivity, linear response range, detection limit, response speed, and reliability, are first introduced. Secondly, representative types of pressure sensors and relevant working principles are introduced and discussed. After that, the applications in human physiology monitoring, health monitoring, artificial skin, and self-powered smart system are listed and discussed in detail. Finally, the remaining challenges and outlook of polymer composite-based flexible sensors are summarized at the end of this review paper. This work should have some impact on the development of high-performance flexible pressure sensors.
RESUMEN
In the last two decades, nanogenerators have been studied inorder to solve the power supply problems of electronic devices. Triboelectric nanogenerators (TENGs) have gained widespread attention due to their excellent properties and wide range of applications. However, previous studies frequently ignored numerous application-related issues and even wasted some of the benefits of the TENG itself in favor of enhanced performance. Here, we propose a TENG based on BaTiO3 (BTO)-polydimethylsiloxane (PDMS) composite films with low cost and simple preparation, where its maximum output performance is obtained when the mass proportion of BTO to PDMS is 40%. In addition, we demonstrate how the single-electrode TENG may be used as a self-powered touch sensor that can communicate with a microcontroller unit (MCU) to turn LED lights on and off. This practical example will provide a valuable reference for the application of low-cost self-powered sensors in wearable devices, Internet of Things, human-machine interactions and other fields. Furthermore, we discovered a number of issues that were rarely or never addressed in previous studies and provide some solutions, such as a signal processing method for a TENG-based self-powered sensor. It serves as a foundation for future investigations on the performance assessment and application of TENGs.
RESUMEN
Flexible tactile sensors with high sensitivity, a broad pressure detection range, and high resolution are highly desired for the applications of health monitoring, robots, and the human-machine interface. However, it is still challenging to realize a tactile sensor with high sensitivity and resolution over a wide detection range. Herein, to solve the abovementioned problem, we demonstrate a universal route to develop a highly sensitive tactile sensor with high resolution and a wide pressure range. The tactile sensor is composed of two layers of microstructured flexible electrodes with high modulus and conductive cotton fabric with low modulus. By optimizing the sensing films, the fabricated tactile sensor shows a high sensitivity of 8.9 × 104 kPa-1 from 2 Pa to 250 kPa because of the high structural compressibility and stress adaptation of the multilayered composite films. Meanwhile, a fast response speed of 18 ms, an ultrahigh resolution of 100 Pa over 100 kPa, and excellent durability over 20 000 loading/unloading cycles are demonstrated. Moreover, a 6 × 6 tactile sensor array is fabricated and shows promising potential application in electronic skin (e-skin). Therefore, employing multilayered composite films for tactile sensors is a novel strategy to achieve high-performance tactile perception in real-time health monitoring and artificial intelligence.
RESUMEN
Adhesion between flexible devices and skin surface facilitates portability of devices and reliable signal acquisition from human body, which is essential for medical therapy devices or monitoring systems. Here, we utilize a simple, cost-effective, and scalable layer-by-layer dip-coating method to fabricate a skin-adhesive multifunctional textile-based device, consisting of three parts: low-cost and easily available airlaid paper (AP) substrate, conductive MXene sensitive layer, and adhesive polydimethylsiloxane (PDMS). The adhesive layer of lightly cross-linked PDMS enables the device to form conformal contact with skin even during human joint bending. The smart textile device exhibits excellent electro-thermal and photo-thermal conversion performance with good cycling stability and tunability. Furthermore, the textile electronics show good electromagnetic interference (EMI) shielding properties due to the good electrical conductivity, as well as sensitive and stable pressure sensing properties for human motion detection. Consequently, this efficient strategy provides a possible way to design multifunctional and wearable electronic textiles for medical applications.
Asunto(s)
Dispositivos Electrónicos Vestibles , Humanos , Adhesivos , Calefacción , Textiles , Electrónica , Conductividad EléctricaRESUMEN
Antibiotics play an essential role in the treatment of various diseases. However, the overuse of antibiotics has led to the pollution of water bodies and food safety, affecting human health. Herein, we report a dual-emission MOF-based flexible sensor for the detection of antibiotics in water, which was prepared by first encapsulating rhodamine B (RhB) by a zeolite imidazolium ester skeleton (ZIF-8) and then blending it with polyvinylidene difluoride (PVDF). The luminescent properties, structural tunability, and flexible porosity of the MOF-based composites were combined with the processability and flexibility of polymers to prepare luminescent membranes. The sensor is capable of dual-emission ratiometric fluorescence sensing of nitrofurantoin (NFT) and oxytetracycline (OTC), exhibiting sensitive detection of fluorescence burst and fluorescence enhancement, respectively, with detection limits of 0.012 µM and 8.9 nM. With the advantages of visual detection, high sensitivity, short detection time, and simplicity, the highly sensitive ratiometric fluorescent flexible sensor has great potential for detecting antibiotics in an aqueous environment. It will further stimulate interest in luminescent MOF-based mixed matrix membranes and their sensing applications.
RESUMEN
Histamine, which is a naturally occurring chemical in seafood, is known to cause undesirable inflammatory response when consumed in large amounts. Histamine is produced in unsafe amounts in colored seafood when improperly stored for just a few hours. Food and health regulatory bodies across the world have guidelines limiting the amount of histamine in fresh as well as processed seafood. Conventional histamine detection is performed in testing labs, which is a slow process and results in bottlenecks in the seafood supply-chain system. A system to rapidly detect the seafood histamine levels on site is very desirable for seafood suppliers. Herein, we describe an impedance-based histamine detection sensor built on a flexible substrate that can detect histamine in the range of 100-500 ppm. Moreover, our sensor discriminates histamine in the presence of DL-histidine and other biogenic amines, with the selectivity provided by molecular imprinting technology. As a proof of concept, a smartphone controlled, portable semi-quantitative histamine sensing device was fabricated that gave out reliable testing results for histamine in different test solutions as well as for real seafood. We believe this technology can be extended towards determination of other food contaminants in aqueous solutions.
Asunto(s)
Histamina , Impresión Molecular , Aminas Biogénicas , Polímeros Impresos MolecularmenteRESUMEN
Flexible piezoresistive pressure sensors obtain global research interest owing to their potential applications in healthcare, human-robot interaction, and artificial nerves. However, an additional power supply is usually required to drive the sensors, which results in increased complexity of the pressure sensing system. Despite the great efforts in pursuing self-powered pressure sensors, most of the self-powered devices can merely detect the dynamic pressure and the reliable static pressure detection is still challenging. With the help of redox-induced electricity, a bioinspired graphite/polydimethylsiloxane piezoresistive composite film acting both as the cathode and pressure sensing layer, a neoteric electronic skin sensor is presented here to detect not only the dynamic forces but also the static forces without an external power supply. Additionally, the sensor exhibits a fascinating pressure sensitivity of â¼103 kPa-1 over a broad sensing range from 0.02 to 30 kPa. Benefiting from the advanced performance of the device, various potential applications including arterial pulse monitoring, human motion detecting, and Morse code generation are successfully demonstrated. This new strategy could pave a way for the development of next-generation self-powered wearable devices.
Asunto(s)
Dimetilpolisiloxanos/química , Grafito/química , Dispositivos Electrónicos Vestibles , Técnicas Biosensibles , Conductividad Eléctrica , Suministros de Energía Eléctrica , Técnicas Electroquímicas , Electrodos , Humanos , Monitoreo Fisiológico , Oxidación-Reducción , Presión , Pulso ArterialRESUMEN
Piezoresistive microsensors are considered to be essential components of the future wearable electronic devices. However, the expensive cost, complex fabrication technology, poor stability, and low yield have limited their developments for practical applications. Here, we present a cost-effective, relatively simple, and high-yield fabrication approach to construct highly sensitive and ultrastable piezoresistive sensors using a bioinspired hierarchically structured graphite/polydimethylsiloxane composite as the active layer. In this fabrication, a commercially available sandpaper is employed as the mold to develop the hierarchical structure. Our devices exhibit fascinating performance including an ultrahigh sensitivity (64.3 kPa-1), fast response time (<8 ms), low limit of detection of 0.9 Pa, long-term durability (>100 000 cycles), and high ambient stability (>1 year). The applications of these devices in sensing radial artery pulses, acoustic vibrations, and human body motion are demonstrated, exhibiting their enormous potential use in real-time healthcare monitoring and robotic tactile sensing.
Asunto(s)
Piel , Grafito , Humanos , Movimiento (Física) , TactoRESUMEN
Many low density lipoprotein (LDL) apheresis systems have been applied to patients with hyperlipidemia, but these systems usually work on the basis of complicated equipment and the cost of treatment is expensive. In order to achieve effective treatment of hyperlipidemia at a lower cost, we developed a new LDL apheresis system with dextran sulfate (LAS-DS). In this study, 50 patients with hyperlipidemia were treated 120 times with the new LAS-DS. In each treatment, 600 +/- 100 mL of plasma (equal to approximately 25% of the total plasma of patients) was collected by apheresis, and DS solution and calcium chloride solution were added into the collected plasma as LDL absorber and catalyzer, respectively. DS selectively binds LDL cholesterol (LDL-C) under the catalysis of calcium ion and the LDL-C-DS complex is removed by centrifugation. The treated plasma was transfused back into the patients and the excessive calcium in the plasma was removed by the cation exchange column integrated in the transfusion set. After treatment with our new system, the acute mean LDL-C reduction was 97% in the apheresis plasma of hyperlipidemia patients. The corresponding reduction was 55.2% and 69.4% for total cholesterol and total triglyceride. There were insignificant reductions of high density lipoprotein cholesterol (HDL-C) and albumin. The new LDL apheresis system with DS that we developed is very simple to operate without relying on complicated equipment, and it can achieve significant clinical results at a much lower cost compared with existing systems. Based on this study we think the new system can provide a safe, effective and much cheaper means for the treatment of hyperlipidemia patients.
Asunto(s)
Eliminación de Componentes Sanguíneos/métodos , Hiperlipidemias/terapia , Técnicas de Inmunoadsorción , Lipoproteínas LDL/sangre , Adulto , Anciano , Eliminación de Componentes Sanguíneos/economía , Sulfato de Dextran , Femenino , Humanos , Hiperlipidemias/sangre , Hiperlipidemias/economía , Masculino , Persona de Mediana EdadRESUMEN
For following the trend of miniaturization as per Moore's law, increasing efforts have been made to develop single devices with versatile functionalities for Internet of Things (IoT). In this work, organic optical memory devices with excellent dual optoelectronic functionality including light sensing and data storage have been proposed. The Au@Ag core-shell nanorods (NRs)-based memory device exhibits large memory window up to 19.7 V due to the well-controlled morphology of Au@Ag NRs with optimum size and concentration. Furthermore, since the extinction intensity of Au@Ag NRs gradually enhance with the increase in Ag shell thickness, the phototunable behaviors of memory device were systematically studied by varying the thickness of Ag shell. Multilevel data storage can be achieved with the light assistant. Finally, the simulation results demonstrate that the phototunable memory property is originated from the multimode localized surface plasmon resonance (LSPR) of Au@Ag NRs, which is in consistent with the experimental results. The Au@Ag core-shell NRs-based memories may open up a new strategy toward developing high-performance optoelectronic devices.