RESUMEN
Understanding in multicellular behaviors in three-dimensional (3D) culture models such as organoids is important to help us better comprehend the mechanisms of the morphogenesis and functions of diverse organs in vivo cellular environment. In this study, we elucidated the multicellular behaviors of the osteocytic spheroids in response to the chemically induced osteogenesis supplements (OS). Particularly, we conducted 1) size change measurement, 2) fusion experiment, and 3) collagen embedding experiment of spheroids, in response to the OS. We found out that the OS alters the multicellular behaviors of the spheroid by greater reduction in the size change measurement and slowing down the speed of fusion experiment and collagen embedding experiment of the spheroids. We also highlighted that the driving force of these changes was the tight actin filaments generated on the surface of the spheroids. Hence, the results altogether indicate that the spheroid model exerted the different multicellular behaviors against the differentiation capability. This study will contribute to understanding the multicellular behaviors of the 3D culture model reconstructed by the cells with greater cell-cell interaction force.
Asunto(s)
Osteogénesis , Esferoides Celulares , Diferenciación Celular , Osteocitos , Osteogénesis/fisiologíaRESUMEN
Osteocytes form a three-dimensional (3D) cellular network within the mineralized bone matrix. The cellular network has important roles in mechanosensation and mechanotransduction related to bone homeostasis. We visualized the embedded osteocyte network in chick calvariae and observed the flow-induced Ca2+ signaling in osteocytes using 3D time-lapse imaging. In response to the flow, intracellular Ca2+ ([Ca2+]i) significantly increased in developmentally mature osteocytes in comparison with young osteocytes in the bone matrix. To investigate the differences in response between young and developmentally mature osteocytes in detail, we evaluated the expression of osteocyte-related genes using the osteocyte-like cell line MLO-Y4, which was 3D-cultured within type I collagen gels. We found that the c-Fos, Cx43, Panx3, Col1a1, and OCN mRNA levels significantly increased on day 15 in comparison with day 7. These findings indicate that developmentally mature osteocytes are more responsive to mechanical stress than young osteocytes and have important functions in bone formation and remodeling.
Asunto(s)
Calcio/metabolismo , Osteocitos/metabolismo , Cráneo/anatomía & histología , Cráneo/metabolismo , Imagen de Lapso de Tiempo , Animales , Técnicas de Cultivo de Célula , Diferenciación Celular/genética , Línea Celular , Forma de la Célula , Embrión de Pollo , Perfilación de la Expresión Génica , Regulación de la Expresión Génica , Imagenología Tridimensional , Mecanotransducción Celular/fisiología , Ratones , Osteocitos/citología , Estrés MecánicoRESUMEN
The length of long bones is determined by column formation of proliferative chondrocytes and subsequent chondrocyte hypertrophy in the growth plate during bone development. Despite the importance of mechanical loading in long bone development, the mechanical conditions of the cells within the growth plate, such as the stress field, remain unclear owing to the difficulty in investigating spatiotemporal changes within dynamically growing tissues. In this study, the mechanisms of longitudinal bone growth were investigated from a mechanical perspective through column formation of proliferative chondrocytes within the growth plate before secondary ossification center formation using continuum-based particle models (CbPMs). A one-factor model, which simply describes essential aspects of a biological signaling cascade regulating cell activities within the growth plate, was developed and incorporated into CbPM. Subsequently, the developmental process and maintenance of the growth plate structure and resulting bone morphogenesis were simulated. Thus, stress anisotropy in the proliferative zone that affects bone elongation through chondrocyte column formation was identified and found to be promoted by chondrocyte hypertrophy. These results provide further insights into the mechanical regulation of multicellular dynamics during bone development.
Asunto(s)
Condrocitos , Placa de Crecimiento , Humanos , Anisotropía , Desarrollo Óseo/fisiología , Diferenciación Celular , HipertrofiaRESUMEN
Although the formation of bone-like nodules is regarded as the differentiation process from stem cells to osteogenic cells, including osteoblasts and osteocytes, the precise biological events during nodule formation are unknown. Here we performed the osteogenic induction of human induced pluripotent stem cells using a three-dimensional (3D) culture system using type I collagen gel and a rapid induction method with retinoic acid. Confocal and time-lapse imaging revealed the osteogenic differentiation was initiated with vigorous focal proliferation followed by aggregation, from which cells invaded the gel. Invading cells changed their morphology and expressed osteocyte marker genes, suggesting the transition from osteoblasts to osteocytes. Single-cell RNA sequencing analysis revealed that 3D culture-induced cells with features of periosteal skeletal stem cells, some of which expressed TGFß-regulated osteoblast-related molecules. The role of TGFß signal was further analyzed in the transition from osteoblasts to osteocytes, which revealed that modulation of the TGFß signal changed the morphology and motility of cells isolated from the 3D culture, suggesting that the TGFß signal maintains the osteoblastic phenotype and the transition into osteocytes requires down-regulation of the TGFß signal.
Asunto(s)
Células Madre Pluripotentes Inducidas , Osteocitos , Humanos , Factor de Crecimiento Transformador beta , Osteogénesis/genética , Osteoblastos , Diferenciación Celular/genéticaRESUMEN
Osteocytes differentiated from osteoblasts play significant roles as mechanosensors in modulating the bone remodeling process. While the well-aligned osteocyte network along the trabeculae with slender cell processes perpendicular to the trabeculae surface is known to facilitate the sensing of mechanical stimuli by cells and the intracellular communication in the bone matrix, the mechanisms underlying osteocyte network formation remains unclear. Here, we developed a novel in vitro collagen matrix system exerting a uniaxially-fixed mechanical boundary condition on which mouse osteoblast-like MC3T3-E1 cells were subcultured, evoking cellular alignment along the uniaxial boundary condition. Using a myosin II inhibitor, blebbistatin, we showed that the intracellular tension via contraction of actin fibers contributed to the cellular alignment under the influence of isometric matrix condition along the uniaxially-fixed mechanical boundary condition. Furthermore, the cells actively migrated inside the collagen matrix and promoted the expression of osteoblast and osteocyte genes with their orientations aligned along the uniaxially-fixed boundary condition. Collectively, our results suggest that the intracellular tension of osteoblasts under a uniaxially-fixed mechanical boundary condition is one of the factors that determines the osteocyte alignment inside the bone matrix.
Asunto(s)
Técnicas de Cultivo de Célula , Colágeno/fisiología , Osteoblastos/fisiología , Osteogénesis/fisiología , Animales , Fenómenos Biomecánicos , Línea Celular , Movimiento Celular , Compuestos Heterocíclicos de 4 o más Anillos/farmacología , Ratones , Modelos Biológicos , Osteoblastos/efectos de los fármacos , Osteogénesis/efectos de los fármacos , Osteogénesis/genéticaRESUMEN
Damage accumulation in the bone under continuous daily loading causes local mechanical overloading known to induce osteocyte apoptosis, which promotes bone resorption to repair bone damage. However, only a few studies have investigated the mechanism of apoptosis in mechanically overloaded osteocytes. As mechanically stimulated osteocytes produce nitric oxide (NO), which triggers apoptosis in various cell types, we aimed to elucidate the mechanism underlying apoptosis in mechanically overloaded osteocytes, focusing on intracellular NO. To investigate the effects of force magnitude on apoptosis and intracellular NO production, we isolated osteocytes from DMP1-EGFP mice and subjected them to quantitative local forces via fibronectin-coated micro beads targeting integrin on the cell surface using a magnetic tweezer. Cell shrinkage was microscopically examined, and intracellular NO production was visualized using DAR-4 M. Mechanical stimulation revealed relationships between force magnitude, apoptosis, and intracellular NO production. The application of a smaller force resulted in no significant cell shrinkage or intracellular NO production; however, a larger force caused a rapid increase in intracellular NO production followed by cell shrinkage. Besides, intracellular NOS (NO synthase) inhibition and NO donation revealed the pro-apoptotic roles of NO in osteocytes. L-NAME (NOS inhibitor)-treated cells displayed no significant shrinkage under a larger force, whereas SNP (NO donor)-treated cells showed cell shrinkage and Annexin V fluorescence, indicating apoptosis. Collectively, our study demonstrates that larger force leads to NO production-mediated osteocyte shrinkage, implying an initial apoptotic response and highlighting the importance of NO production in bone damage.
Asunto(s)
Resorción Ósea , Osteocitos , Animales , Apoptosis , Huesos , Ratones , Óxido NítricoRESUMEN
Self-organization of pluripotent stem cells during tissue formation is directed by the adhesion microenvironment, which defines the resulting tissue topography. Although the influence of tissue topography on pluripotency state has been inferred, this aspect of self-organization remains largely unexplored. In this study, to determine the effect of self-organized tissue topography on pluripotency loss, we designed novel island mesh substrates to confine the self-organization process of mouse embryonic stem cells, enabling us to generate isolated cell layers with an island-like topography and overhanging edges. Using immunofluorescence microscopy, we determined that cells at the tissue edge exhibited deformed nuclei associated with low OCT3/4, in contrast with cells nested in the tissue interior which had round-shaped nuclei and exhibited sustained OCT3/4 expression. Interestingly, F-actin and phospho-myosin light chain were visibly enriched at the tissue edge where ERK activation and elevated AP-2γ expression were also found to be localized, as determined using both immunofluorescence microscopy and RT-qPCR analysis. Since actomyosin contractility is known to cause ERK activation, these results suggest that mechanical condition at the tissue edge can contribute to loss of pluripotency leading to differentiation. Thus, our study draws attention to the influence of self-organized tissue topography in stem cell culture and differentiation.
Asunto(s)
Células Madre Embrionarias de Ratones , Células Madre Pluripotentes , Animales , Técnicas de Cultivo de Célula , Diferenciación Celular , Células Madre Embrionarias , RatonesRESUMEN
The recapitulation of bone formation via the in vitro generation of bone-like nodules is frequently used to understand bone development. However, current bone-induction techniques are slow and difficult to reproduce. Here, we report the formation of bone-like nodules within ten days, via the use of retinoic acid (RA) to induce the osteogenic differentiation of human induced pluripotent stem cells (hiPSCs) into osteoblast-like and osteocyte-like cells that create human bone tissue when implanted in calvarial defects in mice. We also show that the induction of bone formation depends on cell signalling through the RA receptors RARα and RARß, which simultaneously activate the BMP (bone morphogenetic protein) and Wnt signalling pathways. Moreover, by using patient-derived hiPSCs, the bone-like nodules recapitulated the osteogenesis-imperfecta phenotype, which was rescued via the correction of disease-causing mutations and partially by an mTOR (mechanistic target of rapamycin) inhibitor. The method of inducing bone nodules may serve as a fast and reproducible model for the study of the formation of both healthy and pathological bone.
Asunto(s)
Huesos/patología , Huesos/fisiología , Células Madre Pluripotentes Inducidas/patología , Células Madre Pluripotentes Inducidas/fisiología , Osteogénesis/fisiología , Animales , Proteínas Morfogenéticas Óseas , Huesos/efectos de los fármacos , Diferenciación Celular , Células Cultivadas , Regulación de la Expresión Génica , Humanos , Técnicas In Vitro , Células Madre Pluripotentes Inducidas/efectos de los fármacos , Masculino , Ratones , Ratones Desnudos , Ratones SCID , Mutación , Osteogénesis/efectos de los fármacos , Osteogénesis/genética , Fenotipo , Receptores de Ácido Retinoico/efectos de los fármacos , Serina-Treonina Quinasas TOR/efectos de los fármacos , Trasplante , Tretinoina/farmacología , Vía de Señalización WntRESUMEN
The human finger is said to be the extension of the brain and can convey the information on mechanical, thermal, and tissue damaging. The quantitative prediction of blood flow rate and heat generation are of great importance for diagnosing blood circulation illness and for the noninvasive measurement of blood glucose. In this study, we developed a coupled thermofluid model to simulate blood flow in large vessels and living tissue. The finite element (FE) model to analyze the blood perfusion and heat transport in the human finger was developed based on the transport theory in porous media. With regard to the blood flow in the large arteries and veins, the systemic blood circulation in the upper limb was modeled based on the one-dimensional flow in an elastic tube. The blood pressure and velocity in each vessel were first computed and the corresponding values for the large vessels in the finger were subsequently transferred to the FE model as the boundary conditions. The realistic geometric model for the human finger was constructed based on the MRI image data. After computing the capillary pressure and blood velocity in the tissue, the temperatures in the large vessels and the tissue of the finger were computed simultaneously by numerically solving the energy equation in porous media. The computed blood flow in tissues is in agreement with the anatomical structure and the measurement. It is believed that this analysis model will have extensive applications in the prediction of peripheral blood flow, temperature variation, and mass transport.
Asunto(s)
Dedos/irrigación sanguínea , Dedos/fisiología , Análisis de Elementos Finitos , Modelos Biológicos , Conductividad Térmica , Velocidad del Flujo Sanguíneo/fisiología , Presión Sanguínea/fisiología , Humanos , Imagen por Resonancia Magnética , Flujo Sanguíneo Regional/fisiologíaRESUMEN
Condensation/aggregation process of rabbit-derived chondrocytes on a fibroin-coated patterned substrate was observed to estimate initial aggregation process in fibroin sponge. Chondrocytes were seeded on array of 160 microm diameter pits in three densities: 5 cells/pit (2.5 x 10(4) cells/cm(2), LOW), 15 cells/pit (7.5 x 10(4) cells/cm(2), MID) and 25 cells/pit (12.5 x 10(4) cells/cm(2), HIGH). In the MID and HIGH groups, cells tended to form aggregates after 24 h after cell seeding. In the LOW group, cell aggregate were not seen in a majority of the pits. Observation of aggregates using confocal laser scanning microscope showed that the chondrocytes at the interface of the fibroin surface tended to extend to the surface, developing an extensive network of stress fibers throughout the cytoplasm. On the other hand, chondrocytes in the other part of the aggregates maintained spherical shape, and most of the actin was localized in the cell cortex as opposed to in stress fibers. These results suggest two functional structures in the aggregates, which may explain the good balance between the maintenance of their differentiated phenotype and proliferation rate in the fibroin sponge.
Asunto(s)
Materiales Biocompatibles/química , Condrocitos/química , Fibroínas/química , Actinas/química , Animales , Cartílago Articular/patología , Adhesión Celular , Movimiento Celular , Condrocitos/citología , Materiales Biocompatibles Revestidos , Citoplasma/metabolismo , Microscopía Confocal/métodos , Conejos , Espectrometría de Fluorescencia/métodos , Propiedades de Superficie , Factores de TiempoRESUMEN
Coupling interactions among mechanical and biochemical factors are important for the realization of various cellular processes that determine cell migration. Although F-actin network dynamics has been the focus of many studies, it is not yet clear how mechanical forces generated by actomyosin contractility spatiotemporally regulate this fundamental aspect of cell migration. In this study, using a combination of fluorescent speckle microscopy and particle imaging velocimetry techniques, we perturbed the actomyosin system and examined quantitatively the consequence of actomyosin contractility on F-actin network flow and deformation in the lamellipodia of actively migrating fish keratocytes. F-actin flow fields were characterized by retrograde flow at the front and anterograde flow at the back of the lamellipodia, and the two flows merged to form a convergence zone of reduced flow intensity. Interestingly, activating or inhibiting actomyosin contractility altered network flow intensity and convergence, suggesting that network dynamics is directly regulated by actomyosin contractility. Moreover, quantitative analysis of F-actin network deformation revealed that the deformation was significantly negative and predominant in the direction of cell migration. Furthermore, perturbation experiments revealed that the deformation was a function of actomyosin contractility. Based on these results, we suggest that the actin cytoskeletal structure is a mechanically self-regulating system, and we propose an elaborate pathway for the spatiotemporal self-regulation of the actin cytoskeletal structure during cell migration. In the proposed pathway, mechanical forces generated by actomyosin interactions are considered central to the realization of the various mechanochemical processes that determine cell motility.
Asunto(s)
Actinas/fisiología , Actomiosina/fisiología , Movimiento Celular/fisiología , Citoesqueleto/fisiología , Queratinocitos/fisiología , Proteínas Motoras Moleculares/fisiología , Animales , Células Cultivadas , Peces , Estrés MecánicoRESUMEN
Risk factors for acquiring hepatitis E among individuals in industrialized countries including Japan are not fully understood. We investigated whether Japanese blood donors with or without an elevated alanine aminotransferase (ALT) level are likely to have hepatitis E virus (HEV) infection. Serum samples were collected from 5,343 voluntary blood donors including 1,087 donors with elevated ALT of 61-966 IU/L and 4,256 donors with normal ALT (< or = 60 IU/L) at two Japanese Red Cross Blood Centers, and were tested for the presence of anti-HEV IgG by in-house enzyme-linked immunosorbent assay (ELISA). Overall, 200 donors (3.7%) were positive for anti-HEV IgG, including 32 (2.9%) with elevated ALT and 168 (3.9%) with normal ALT. Serum samples with anti-HEV IgG were further tested for the presence of anti-HEV IgM by in-house ELISA and for HEV RNA by reverse transcription (RT)-polymerase chain reaction (PCR). Three donors with ALT of 966, 62 or 61 IU/L were positive for anti-HEV IgM and HEV RNA. The HEV isolates obtained from the three viremic donors segregated into genotype 3, were 91.5-93.4% similar to each other in the 412 nucleotide sequence of open reading frame 2, and had the highest identity of 91.5-94.9% with the JRA1 isolate which was recovered from a Japanese patient with sporadic acute hepatitis E who had never been abroad, suggesting that these three HEV isolates are indigenous to Japan. This study suggests that a small but significant proportion of blood donors in Japan with or without elevated ALT are viremic and are potentially able to cause transfusion-associated hepatitis E.