RESUMEN
We report the first observation of birefringent in-phase supermode operation of a phase-locked multicore fiber laser. The in-phase mode operation of our 12-core rectangular-array microstructured fiber laser was confirmed by the near-field distribution, the far-field diffraction pattern, and the optical spectrum. The birefringence of the in-phase mode in propagation constant Deltay was measured as ~ 4 x 10(-6) 1/mum. The break of the polarization degeneracy indicates the possibility of single polarization operation of phase-locked multicore fiber lasers and amplifiers.
RESUMEN
Utilizing phosphate glass fiber with photonic crystal cladding and highly doped, large area core a cladding-pumped, single-frequency fiber oscillator is demonstrated. The fiber oscillator contains only 3.8 cm of active fiber in a linear cavity and operates in the 1.5 micron region. Spectrally broad, multimode pump light from semiconductor laser diodes is converted into a single-mode, single-frequency light beam with an efficiency of about 12% and the oscillator output power reached 2.3 W.
Asunto(s)
Tecnología de Fibra Óptica/instrumentación , Vidrio , Láseres de Semiconductores , Modelos Teóricos , Refractometría/instrumentación , Simulación por Computador , Diseño Asistido por Computadora , Diseño de EquipoRESUMEN
A fully 3-dimensional finite element model has been developed that simulates the internal temperature distribution of short-length high-power fiber lasers. We have validated the numerical model by building a short, cladding-pumped, Er-Yb-codoped fiber laser and measuring the core temperature during laser operation. A dual-end-pumped, actively cooled, fiber laser has generated >11 W CW output power at 1535 nm from only 11.9 cm of active fiber. Simulations indicate power-scaling possibilities with improved fiber and cooling designs.
RESUMEN
An alternative original approach to achieve single-transverse-mode laser emissions from multimode (MM) active fibers is demonstrated. The fiber cavity is constructed by simply splicing a conventional passive single-mode fiber (SMF-28) onto a few centimeters-long active MM fiber section whose length is precisely controlled. Owing to the self-imaging property of multimode interference (MMI) in the MM fiber, diffraction-limited laser output is obtained from the end of the SMF-28, and the MMI fiber laser is nearly as efficient as the corresponding MM fiber laser. Moreover, because of the spectral filtering effect during in-phase MMI, the bandwidth of the MMI fiber laser is below 0.5 nm.
RESUMEN
We report a compact multicore fiber laser that utilizes an all-fiber approach for phase locking and in-phase supermode selection. By splicing passive coreless fibers of controlled lengths to both ends of an active 19-core fiber, we demonstrate that the fundamental in-phase supermode can be selectively excited with a completely monolithic fiber device, instead of conventional free-space and bulk optics, to achieve phase-locked operation for a multiemitter laser device.
RESUMEN
We report fabrication and testing of the first phosphate glass microstructured fiber lasers with large Er-Yb-codoped cores. For an 11-cm-long cladding-pumped fiber laser, more than 3 W of continuous wave output power is demonstrated, and near single-mode beam quality is obtained for an active core area larger than 400 microm2.
RESUMEN
We present what is, to the best of our knowledge, the first systematic study on how negative core-cladding index difference influences microstructured optical fiber's modal behavior. Single-mode lasing has been realized for short-length cladding-pumped phosphate glass microstructured fibers with large depressed-index Er(3+)-Yb(3+)-codoped cores.