Three octave visible to mid-infrared supercontinuum generation seeded by multimode silica fiber pumped at 1064†nm.

Hyperspectral spectroscopy requires light sources with wide spectral ranges from the visible to the mid-infrared. Here, we demonstrate the first fiber-based mid-infrared supercontinuum covering three octaves of frequency by leveraging 1-µm laser technology. The process consists in spectral broadening of a 1064-nm pump toward 0.48-2.5 µm in a graded-index multimode fiber, followed by a fluoro-indate fiber used to reach deeper into the near infrared (4.3 µm). Finally, an arsenic selenide chalcogenide fiber allows us to reach the 6-µm wavelength region, providing a 0.75-6-µm supercontinuum. We illustrate the potential of this light source by recording mid-infrared absorption spectra of organic compounds.

Tunable four-wave mixing enabled by a self-phase modulation of chirped pulses.

We experimentally demonstrate how a concatenation of the standard and microstructure fiber segments permits adjusting the four-wave mixing sideband position over a large spectral range by varying the chirp of an input pulsed pump at a fixed wavelength in the presence of a self-phase modulation. The blue- and redshifted sidebands can stand aside over ∼200 nm and ∼450 nm from the pump, respectively, which agrees well with the numerical simulations. We validate our approach by showing the feasibility of CARS imaging.

Continuous spatial self-cleaning in GRIN multimode fiber for self-referenced multiplex CARS imaging.

We demonstrate how spatial beam self-cleaning and supercontinuum generation in graded-index multimode optical fibers can be directly applied in multiplex coherent anti-Stokes Raman Scattering (M-CARS) spectroscopy. Although supercontinuum generation causes pump depletion mainly in the center of the beam, the partial recovery of the pump brightness due to self-cleaning may enable self-referenced M-CARS, with no additional delay lines to synchronize pump and Stokes waves. As a proof-of-principle, we report examples of imaging of single chemical compounds and polystyrene beads. The new scheme paves the way towards simpler M-CARS systems based on multimode fiber sources.

Helical plasma filaments from the self-channeling of intense femtosecond laser pulses in optical fibers.

We experimentally and numerically study the ignition of helical-shaped plasma filaments in standard optical fibers. Femtosecond pulses with megawatt peak power with proper off-axis and tilted coupling in the fiber core produce plasma skew rays. These last for distances as long as 1000 wavelengths thanks to a combination of linear waveguiding and the self-channeling effect. Peculiar is the case of graded-index multimode fibers; here the spatial self-imaging places constraints on the helix pitch. These results may find applications for fabricating fibers with helical-shaped core micro-structuration as well as for designing laser components and three-dimensional optical memories.

Helical plasma filaments from the self-channeling of intense femtosecond laser pulses in optical fibers: publisher's note.

This publisher's note contains a correction to Opt. Lett.47, 1 (2022)10.1364/OL.445321.

Experimental observation of self-imaging in SMF-28 optical fibers.

Spatial self-imaging, consisting of the periodic replication of the optical transverse beam profile along the propagation direction, can be achieved in guided wave systems when all excited modes interfere in phase. We exploited material defects photoluminescence for directly visualizing self-imaging in a few-mode, nominal singlemode SMF-28 optical fiber. Visible luminescence was excited by intense femtosecond infrared pulses via multiphoton absorption processes. Our method permits us to determine the mode propagation constants and the cutoff wavelength of transverse fiber modes.

Frequency-resolved spatial beam mapping in multimode fibers: application to mid-infrared supercontinuum generation.

We present a new, to the best of our knowledge, spatial-spectral mapping technique permitting measurement of the beam intensity at the output of a graded-index multimode fiber (GIMF) with sub-nanometric spectral resolution. We apply this method to visualize the fine structure of the beam shape of a sideband generated at 1870 nm by geometric parametric instability (GPI) in a GIMF. After spatial-spectral characterization, we amplify the GPI sideband with a thulium-doped fiber amplifier to obtain a microjoule-scale picosecond pump whose spectrum is finally broadened in a segment of InF3 optical fiber to achieve a supercontinuum ranging from 1.7 up to 3.4 µm.

3D time-domain beam mapping for studying nonlinear dynamics in multimode optical fibers.

Characterization of the complex spatiotemporal dynamics of optical beam propagation in nonlinear multimode fibers requires the development of advanced measurement methods, capable of capturing the real-time evolution of beam images. We present a new space-time mapping technique, permitting the direct detection, with picosecond temporal resolution, of the intensity from repetitive laser pulses over a grid of spatial samples from a magnified image of the output beam. By using this time-resolved mapping, we provide, to the best of our knowledge, the first unambiguous experimental observation of instantaneous intrapulse nonlinear coupling processes among the modes of a graded index fiber.

Socioeconomic inequalities and temporomandibular joint disorders in adolescents: contributions from a Maranhão cohort.

AIM: To assess the prevalence of temporomandibular disorder (TMD) in adolescents and estimate possible associations with poverty. BASIC RESEARCH DESIGN: A cross-sectional study nested within a prospective birth cohort study conducted in São Luís, Maranhão, Brazil. PARTICIPANTS: 2,412 adolescents aged 18-19 years. MATERIAL AND METHODS: The presence of TMD, classified according to the Fonseca Anamnestic Index, was used as the outcome. The following explanatory variables were assessed: gender, household head, paved/asphalted street, piped water, and socioeconomic background, based on the Brazilian Association of Market Research criteria and the poverty income ratio (PIR). Logistic regression analysis was performed with the estimation of odds ratios (OR) and 95% confidence intervals. RESULTS: TMD was common (51.4%) and was associated with poverty, as it was more frequent among adolescents from social classes D-E (OR=2.60; 95% CI: 1.48-4.55) and C (OR=1.82; 95% CI: 1.12-2.99) compared to A/B, and among poor adolescents using the PIR (OR=1.50; 95% CI: 1.02-2.33). CONCLUSIONS: The prevalence of TMD in socioeconomically disadvantaged adolescents in São Luís is high, and these data allow the early identification of at-risk groups. We recommend carrying out other population-based studies, using diagnostic strategies with greater accuracy.

Highly efficient few-mode spatial beam self-cleaning at 1.5µm.

We experimentally demonstrate that spatial beam self-cleaning can be highly efficient when obtained with a few-mode excitation in graded-index multimode optical fibers. By using 160 ps long, highly chirped (6 nm bandwidth at -3dB) optical pulses at 1562 nm, we demonstrate a one-decade reduction of the power threshold for spatial beam self-cleaning, with respect to previous experiments using pulses with laser wavelengths at 1030-1064 nm. Self-cleaned beams remain spatio-temporally stable for more than a decade of their peak power variation. The impact of input pulse temporal duration is also studied.

Wavefront shaping for optimized many-mode Kerr beam self-cleaning in graded-index multimode fiber.

We report experimental results, showing that the Kerr beam self-cleaning of many low-order modes in a graded-index multimode fiber can be controlled thanks to optimized wavefront shaping of the coherent excitation beam. Adaptive profiling of the transverse input phase was utilized for channeling the launched power towards a specific low-order fiber mode, by exploiting nonlinear coupling among all guided modes. Experiments were carried out with 7 ps pulses at 1064 nm injected in a five meters long multimode fiber operating in the normal dispersion regime. Optimized Kerr beam self-cleaning of five different LP modes is reported, with a power threshold that increases with the mode order.

Spatial beam self-cleaning and supercontinuum generation with Yb-doped multimode graded-index fiber taper based on accelerating self-imaging and dissipative landscape.

We experimentally demonstrate spatial beam self-cleaning and supercontinuum generation in a tapered Ytterbium-doped multimode optical fiber with parabolic core refractive index profile when 1064 nm pulsed beams propagate from wider (122 µm) into smaller (37 µm) diameter. In the passive mode, increasing the input beam peak power above 20 kW leads to a bell-shaped output beam profile. In the active configuration, gain from the pump laser diode permits to combine beam self-cleaning with supercontinuum generation between 520-2600 nm. By taper cut-back, we observed that the dissipative landscape, i.e., a non-monotonic variation of the average beam power along the MMF, leads to modal transitions of self-cleaned beams along the taper length.

Interplay of Kerr and Raman beam cleaning with a multimode microstructure fiber.

We experimentally study the competition between Kerr beam self-cleaning and Raman beam cleanup in a multimode air-silica microstructure optical fiber. Kerr beam self-cleaning of the pump is observed for a certain range of input powers only. Stokes Raman beam generation and cleanup lead to both depletion and degradation of beam quality for the pump. The interplay of modal four-wave mixing and Raman scattering in the infrared domain leads to the generation of a multimode supercontinuum ranging from 500 nm up to 1800 nm.

Kerr self-cleaning of pulsed beam in an ytterbium doped multimode fiber.

We experimentally demonstrate that Kerr spatial self-cleaning of a pulsed beam can be obtained in an amplifying multimode optical fiber. An input peak power of 500 W only was sufficient to produce a quasi-single-mode emission from the double-clad ytterbium doped multimode fiber (YMMF) with non-parabolic refractive index profile. We compare the self-cleaning behavior observed in the same fiber with loss and with gain. Laser gain introduces new opportunities to achieve spatial self-cleaning of light in multimode fibers at a relatively low power threshold.

Nonlinear beam self-cleaning in a coupled cavity composite laser based on multimode fiber.

We study a coupled cavity laser configuration where a passively Q-switched Nd:YAG microchip laser is combined with an extended cavity, including a doped multimode fiber. For appropriate coupling levels with the extended cavity, we observed that beam self-cleaning was induced in the multimode fiber thanks to nonlinear modal coupling, leading to a quasi-single mode laser output. In the regime of beam self-cleaning, laser pulse duration was reduced from 525 to 225 ps. We also observed a Q-switched mode-locked operation, where spatial self-cleaning was accompanied by far-detuned nonlinear frequency conversion in the active multimode fiber.

Intermodal modulational instability in graded-index multimode optical fibers.

We report on the experimental observation of an intermodal noise-seeded modulational instability process (MI) taking place in the normal dispersion regime of a few-mode graded-index optical fiber. Strong power dependence of the MI spectra is observed, with a peak gain modulation frequency that scales as the square root of the injected light power. These observations are in excellent agreement with the predictions of a bimodal-MI model.

Second harmonic generation in multimode graded-index fibers: spatial beam cleaning and multiple harmonic sideband generation.

We study experimentally and numerically the spectral and spatial dynamics of second harmonic generation in an all-optically poled multimode graded-index fiber. In contrast with poled single-mode fibers, in a multimode graded-index fiber a pump can generate a series of sharp sidebands around its second harmonic (SH) that originate from the sub-millimetric periodic evolution of the intensity at the fundamental frequency. The mutual interaction between the fundamental and its SH may also strongly affect the spatial distribution of guided light for both colors: when increasing the pump power, both fundamental and SH output beams evolve from disordered multimode speckles into two bell-shaped beams.

Far-detuned cascaded intermodal four-wave mixing in a multimode fiber.

We demonstrate far-detuned parametric frequency conversion processes in a few mode graded-index optical fibers pumped by a Q-switched picosecond laser at 1064 nm. Through a detailed analytical and numerical analysis, we show that the multiple sidebands are generated through a complex cascaded process involving inter-modal four-wave mixing. The resulting parametric wavelength detuning spans in the visible down to 405 nm and in the near-infrared up to 1355 nm.

Spatiotemporal characterization of supercontinuum extending from the visible to the mid-infrared in a multimode graded-index optical fiber.

We experimentally demonstrate that pumping a graded-index multimode fiber with sub-ns pulses from a microchip Nd:YAG laser leads to spectrally flat supercontinuum generation with a uniform bell-shaped spatial beam profile extending from the visible to the mid-infrared at 2500 nm. We study the development of the supercontinuum along the multimode fiber by the cut-back method, which permits us to analyze the competition between the Kerr-induced geometric parametric instability and stimulated Raman scattering. We also performed a spectrally resolved temporal analysis of the supercontinuum emission.

Combining efficiency degraded by gain in passively phase-locked laser arrays: contribution of the spectral filtering.

Passive phase-locking of laser arrays is usually less efficient when the operating point is far above the laser threshold. We investigated the contribution due to the spectral filtering effect induced by the coupled cavities. Experiments carried out on a basic dual-arm laser as well as modeling show that some laser combining losses arise from the spectral filtering whose transmission windows have a non-uniform profile. A simple analytical model of the laser confirms this interpretation.