Bioleaching of toxic metals from sewage sludge by co-inoculation of Acidithiobacillus and the biosurfactant-producing yeast Meyerozyma guilliermondii.

The aim of this research is to evaluate the influence of co-inoculation of Acidithiobacillus bacteria and the biosurfactant-producing yeast Meyerozyma guilliermondii in bioleaching processes. The tests were carried out using sewage sludge from UASB reactors co-inoculated with cultures of Acidithiobacillus and M. guilliermondii to promote the solubilization of Cd, Cr, Cu, Ni, Pb and Zn which were determined by Inductively Coupled Plasma - Optical Emission Spectrometry (ICP- OES). After 10 days of incubation, 76.5% of Zn, 59.8% of Ni, 22.0% of Cu, 9.8% of Cd, 9.8% Cr and 7.1% of Pb were solubilized. It was observed that the presence of yeast accelerated the time required for Cd solubilization from 240 to 96 h and there was a 20.1% reduction in nitrogen concentration and 7.6% for phosphorus in this assay. After the bioleaching and co-inoculation assays, the product obtained reached the maximum permissible concentrations for soil disposal for all the analyzed metals in the State of São Paulo, United States and also European Community standards.

Analyses of colloidal, truly dissolved, and DGT-labile metal species and phosphorus in mining area surrounded by tailing dams using self-organising maps.

The knowledge of size-distribution and lability of metals and nutrients in freshwater systems is important for estimation of the ecological effects of mining. However, it is still limited in several mining areas such as the Quadrilátero Ferrífero (Brazil) which was severely polluted by the collapse of the Fundão tailings dam in November 2015. In this study, results of an investigation from 2014 using a neural network named self-organising map (SO-Map) into the conditions of selected trace metals that are of particular importance to mining areas (Cr, Cu, Co, Mn, Ni, Pb, Zn) are presented. Additionally, P was considered by its high importance as a nutrient and sites later affected by the dam burst were also included by chance. Water samples were collected at six sites in dry and rainy seasons and filtered and ultrafiltered for determination of total dissolved (<0.45 µm) and truly dissolved (<1 kDa) fractions. Diffusive gradients in thin films (DGT) devices were deployed in situ for determination of the DGT-labile fraction. All data were analysed using SO-Map and Spearman's rank correlation. Phosphorus in the Carmo River occurred mainly in the truly dissolved and DGT-labile fractions. The higher amounts of this element in the river water (up to 263 µg L-1 of total P) might be related to untreated sewage discharge. Moreover, the concentrations of other trace metals (Mn, Cu, Co, Ni, Zn) were high, even under the "natural" conditions (before the dam failure) due to natural and anthropogenic factors such as local lithology and mining.

Determination of labile inorganic and organic species of Al and Cu in river waters using the diffusive gradients in thin films technique.

The diffusive gradients in thin films (DGT) technique, using a diffusive gel or a restrictive gel, was evaluated for the determination of labile inorganic and organic species of Al and Cu in model synthetic solutions and river water samples. Experiments were performed both in situ and in the laboratory. In the solutions containing Al ions, the major labile fraction consisted of inorganic species. The organic complex fractions were mainly kinetically inert. For the model Cu solutions, the most labile fraction consisted of inorganic species; however, significant amounts of labile organic complexes of Cu were also present. A comparison was made between the results obtained using restrictive gel DGT and tangential flow ultrafiltration (TF-UF). The Cu fraction determined by restrictive gel DGT (corresponding to the "free" ions plus the labile fraction of small molecular size complexes) was larger than that determined by TF-UF (corresponding to all small molecular size ions), suggesting that the techniques exhibited different porosities for discrimination of inorganic species. For the river water samples analyzed in the laboratory, less than 45% of the analytes were present in labile forms, with most being organic species. For the in situ measurements, the labile inorganic and organic fractions were larger than those obtained in the laboratory analyses. These differences could have been due to errors incurred during sample collection and storage. All results were consistent with those found using two different methods, namely, solid-phase extraction and the DGT technique employing the apparent diffusion coefficient.

Characterization of biosurfactant from yeast using residual soybean oil under acidic conditions and their use in metal removal processes.

This study aimed at the production of biosurfactants from yeasts under acidic conditions using residual soybean oil as a carbon source, as well as the biosurfactant produced in the solubilization of metals in sewage sludge. The yeast Meyerozyma guilliermondii was considered the best producer in both pH 4.0 and 2.0; therefore, the product obtained by this yeast was characterized by Fourier transform infrared (FT-IR) and 1H nuclear magnetic resonance (NMR) spectroscopy. Moreover, it was applied in metal removal assays in anaerobic sewage sludge. The spectra obtained in FT-IR suggested that M. guilliermondii's biosurfactant had a similar structure to glycolipids from the sophorolipid class, and it was confirmed by 1H NMR spectroscopy. In the bioleaching assays, the application of biosurfactant (2%) produced by M. guilliermondii with pH adjusted to 2.0 was able to solubilize 15.9% of cadmium from the sewage sludge.

Paraquat-loaded alginate/chitosan nanoparticles: preparation, characterization and soil sorption studies.

Agrochemicals are amongst the contaminants most widely encountered in surface and subterranean hydrological systems. They comprise a variety of molecules, with properties that confer differing degrees of persistence and mobility in the environment, as well as different toxic, carcinogenic, mutagenic and teratogenic potentials, which can affect non-target organisms including man. In this work, alginate/chitosan nanoparticles were prepared as a carrier system for the herbicide paraquat. The preparation and physico-chemical characterization of the nanoparticles was followed by evaluation of zeta potential, pH, size and polydispersion. The techniques employed included transmission electron microscopy, differential scanning calorimetry and Fourier transform infrared spectroscopy. The formulation presented a size distribution of 635 ± 12 nm, polydispersion of 0.518, zeta potential of -22.8 ± 2.3 mV and association efficiency of 74.2%. There were significant differences between the release profiles of free paraquat and the herbicide associated with the alginate/chitosan nanoparticles. Tests showed that soil sorption of paraquat, either free or associated with the nanoparticles, was dependent on the quantity of organic matter present. The results presented in this work show that association of paraquat with alginate/chitosan nanoparticles alters the release profile of the herbicide, as well as its interaction with the soil, indicating that this system could be an effective means of reducing negative impacts caused by paraquat.

Controlled release system for ametryn using polymer microspheres: preparation, characterization and release kinetics in water.

The purpose of this work was to develop a modified release system for the herbicide ametryn by encapsulating the active substance in biodegradable polymer microparticles produced using the polymers poly(hydroxybutyrate) (PHB) or poly(hydroxybutyrate-valerate) (PHBV), in order to both improve the herbicidal action and reduce environmental toxicity. PHB or PHBV microparticles containing ametryn were prepared and the efficiencies of herbicide association and loading were evaluated, presenting similar values of approximately 40%. The microparticles were characterized by scanning electron microscopy (SEM), which showed that the average sizes of the PHB and PHBV microparticles were 5.92±0.74 µm and 5.63±0.68 µm, respectively. The ametryn release profile was modified when it was encapsulated in the microparticles, with slower and more sustained release compared to the release profile of pure ametryn. When ametryn was associated with the PHB and PHBV microparticles, the amount of herbicide released in the same period of time was significantly reduced, declining to 75% and 87%, respectively. For both types of microparticle (PHB and PHBV) the release of ametryn was by diffusion processes due to anomalous transport (governed by diffusion and relaxation of the polymer chains), which did not follow Fick's laws of diffusion. The results presented in this paper are promising, in view of the successful encapsulation of ametryn in PHB or PHBV polymer microparticles, and indications that this system may help reduce the impacts caused by the herbicide, making it an environmentally safer alternative.