RESUMEN
OBJECTIVE: This study investigated the long-term cytotoxic response of thermoplastic polyamide and conventional polymethyle metacrylate (PMMA) denture base materials. MATERIALS AND METHODS: Twenty discs were prepared for each polyamide, heat and cold cured PMMA denture base resins (totally 60) and divided into four sub-groups (n = 5). Cytotoxicity was assessed with the direct cell contact method using cell viability and neutral red (NR) uptake assay. Each sub-group was tested at initial and after being aged for 24 h, 1 week and 8 weeks with artificial saliva according to ISO 10993 standards. RESULTS: There were no significantly difference among the materials and control groups after initial, 24 h and 1 week testing. In 24 h testing, only Deflex was more toxic according to the Control group (p < 0.05). After 8 weeks of aging with artificial saliva, all materials were significantly cytotoxic when compared to the control group. QC20 was more toxic than Deflex and SC Cold Cure (p < 0.05). There were significant differences between the 8 week aging group and the initial, 24 h and 1 week testing for all materials (p < 0.05). CONCLUSIONS: Cytotoxicity of all tested denture base materials increased significantly after the long-term aging. Therefore, long-term aging may be useful to determine a dental material's toxicity. Polyamide denture base material had a similar toxicity profile with conventional heat- and cold-cured PMMA.
Asunto(s)
Bases para Dentadura , Fibroblastos/efectos de los fármacos , Nylons/toxicidad , Polimetil Metacrilato/toxicidad , Células Cultivadas , Fibroblastos/citología , Humanos , Técnicas In VitroRESUMEN
PURPOSE: To investigate the void parameters within the resin cements used for fiber post cementation by micro-CT (µCT) and regional push-out bonding strength. MATERIALS AND METHODS: Twenty-one, single and round shaped roots were enlarged with a low-speed drill following by endodontic treatment. The roots were divided into three groups (n=7) and fiber posts were cemented with Maxcem Elite, Multilink N and Superbond C&B resin cements. Specimens were scanned using µCT scanner at resolution of 13.7 µm. The number, area, and volume of voids between dentin and post were evaluated. A method of analysis based on the post segmentation was used, and coronal, middle and apical thirds considered separately. After the µCT analysis, roots were embedded in epoxy resin and sectioned into 2 mm thick slices (63 sections in total). Push-out testing was performed with universal testing device at 0.5 mm/min cross-head speed. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests (α=.05). RESULTS: Overall, significant differences between the resin cements and the post level were observed in the void number, area, and volume (P<.05). Super-Bond C&B showed the most void formation (44.86 ± 22.71). Multilink N showed the least void surface (3.51 ± 2.24 mm(2)) and volume (0.01 ± 0.01 mm(3)). Regional push-out bond strength of the cements was not different (P>.05). CONCLUSION: µCT proved to be a powerful non-destructive 3D analysis tool for visualizing the void parameters. Multilink N had the lowest void parameters. When efficiency of all cements was evaluated, direct relationship between the post region and push-out bonding strength was not observed.
RESUMEN
BACKGROUND: Glass ionomer cements (GIC) have been widely used in dentistry for many years. In recent years, GIC have also been used for ossiculoplasty. The bond strength of GIC used in ossiculoplasty and the way they may change over the years in the cementation area are being questioned. The bonding strength of the substance may be of importance for long-term outcomes. AIMS: The aim of this study was to investigate the bond strength of different GIC on ossicles. STUDY DESIGN: In vitro study. METHODS: Twenty ossicles were obtained from patients who had undergone ear surgery. All specimens were randomly divided into four subgroups. All specimens were inserted into a specially designed apparatus for shear bond strength (SBS) testing. The tested materials [Aqua Meron (AM), Aqua Cem (AC), Ketac Cem (KC), and Otomimix CPB (OH)] were prepared and applied according to the manufacturer's instructions. The SBS was tested using a universal testing machine at a crosshead speed of 0.5 mm/min. RESULTS: The mean SBSs were found to be 13.28 MPa, 23.43 MPa, 8.51MPa, and 1.78 MPa for AM, AC, KC, and OH, respectively. AC had the highest SBS, which was statistically significantly different from that of KC and OH (p<0.05). Both AM and KC had higher SBS than OH (p<0.05). CONCLUSION: The results obtained in this study by investigating the bone-bonding strength of cements widely used in ossiculoplasty demonstrate that some of these substances have a greater ability to bond to ossicles compared to others. Further clinical investigations are needed to test different parameters.
RESUMEN
OBJECTIVE: The purpose of this study was to evaluate the shear bond strength of a resin cement to yttrium-stabilized tetragonal zirconia (Y-TZP) surfaces treated with air abrasion, silica coating, or CO(2), Er:YAG, or Nd:YAG laser irradiation, or irradiated by each laser after air abrasion. BACKGROUND DATA: Optimized methods are needed to improve the adhesive bonding between resin cement and Y-TZP ceramic. METHODS: Twelve specimens were irradiated with each laser at different parameters and examined by scanning electron microscopy to determine which parameters to use in this study. One hundred forty-one Y-TZP discs were assigned to nine groups: C, no treatment; AA, air abrasion; CJ, silica coating; ER, Er:YAG laser; ND, Nd:YAG laser; CO, CO(2) laser; AA+ER, air abrasion + Er:YAG laser; AA+ND, air abrasion + Nd:YAG laser; AA+CO, air abrasion + CO(2) laser. The composite cylinders were fabricated. After the surface treatments, the specimens were silanized and composite cylinders were cemented with the resin cement. The shear bond strength test was performed after specimens were stored in water for 24 h and after thermocycling for 500 cycles. RESULTS: The highest bond strength was obtained in the AA group and was similar to that of the CJ group. In C, ER, CO, ND, AA+ND, and AA+CO groups, the shear bond strengths were similar to each other according to the Duncan test results. The lowest bond value was obtained in the AA+ER group. CONCLUSION: Although air abrasion and silica coating were the most effective surface treatment methods, CO(2) and Er:YAG laser irradiation alone or Nd:YAG laser irradiation after air abrasion may be used as an alternative treatment method to increase the bond strength between resin cement and Y-TZP material.