Where are we with pre-exposure prophylaxis use in Central and Eastern Europe? Data from the Euroguidelines in Central and Eastern Europe (ECEE) Network Group.

OBJECTIVES: Pre-exposure prophylaxis (PrEP) for HIV infection is an important intervention for control of the HIV epidemic. The incidence of HIV infection is increasing in the countries of Central and Eastern Europe (CEE). Therefore, we investigated the change in PrEP use in CEE over time. METHODS: The Euroguidelines in Central and Eastern Europe (ECEE) Network Group was initiated in February 2016 to compare standards of care for HIV and viral hepatitis infections in CEE. Data on access to PrEP were collected from 23 countries through online surveys in May-June 2017 (76 respondents) and in November 2018-May 2019 (28 respondents). RESULTS: About 34.2% of respondents stated that tenofovir/emtricitabine (TDF/FTC) was licensed for use in their country in 2017, and 66.7% that it was licensed for use in 2018 (P = 0.02). PrEP was recommended in national guidelines in 39.5% of responses in 2017 and 40.7% in 2018 (P = 0.378). About 70.7% of respondents were aware of "informal" PrEP use in 2017, while 66.6% were aware of this in 2018 (P = 0.698). In 2018, there were 53 centres offering PreP (the highest numbers in Poland and Romania), whereas six countries had no centres offering PreP. The estimated number of HIV-negative people on PreP in the region was 4500 in 2018. Generic TDF/FTC costs (in Euros) ranged from €10 (Romania) to €256.92 (Slovakia), while brand TDF/FTC costs ranged from €60 (Albania) to €853 (Finland). CONCLUSIONS: Although the process of licensing TDF/FTC use for PrEP has improved, this is not yet reflected in the guidelines, nor has there been a reduction in the "informal" use of PrEP. PrEP remains a rarely used preventive method in CEE countries.

Liver stiffness regression after successful Hepatitis C treatment is independent of HIV coinfection.

OBJECTIVES: The aim of the study was to assess the regression of liver stiffness after successful direct-acting antiviral (DAA) treatment in patients with hepatitis C virus (HCV) monoinfection and HCV/-HIV coinfection. In addition, we aimed to identify factors associated with liver stiffness regression. METHODS: We studied patients treated with interferon-free DAA regimens with a sustained virological response at week 12 (SVR12 ) or 24 (SVR24 ) post-treatment. Liver stiffness was assessed by transient elastography (TE) before the initiation and after the end of treatment (median 12 weeks). RESULTS: Of 214 enrolled patients, 85 (40%) were HCV monoinfected and 129 (60%) HCV/HIV coinfected. Baseline median TE values were 7.8 kPa [interquartile range (IQR) 5.9-12.0 kPa] in mono-infected patients and 10.7 kPa (IQR 7.8-17.0 kPa) in coinfected patients. Overall, the median TE value decreased from 10.1 to 6.8 kPa (n = 214; P < 0.0001). There was no difference between mono- and coinfected patients (-2.2 versus -3.3 kPa, respectively; P = 0.88), which was verified by an analysis of covariance (ANCOVA) adjusting for baseline TE values. Significant (≥ 30%) regression of liver stiffness was achieved by 45% of patients (54% with baseline TE ≥ 7.1 kPa). In multivariate analysis, a prior HCV treatment was a negative predictor of liver stiffness regression [odds ratio (OR) 0.31; P = 0.001]. A higher baseline TE value was positively associated with achieving a significant regression (OR 1.06; P = 0.02). HIV coinfection status, HCV genotype, age, sex, treatment duration, controlled attenuation parameter value, bilirubin concentration, platelet count and aspartate aminotransferase concentration were not associated with liver stiffness regression. CONCLUSIONS: Regression of liver stiffness after successful DAA treatment did not differ in patients with HCV monoinfection and those with HCV/HIV coinfection. Half of all patients achieved a significant (≥ 30%) regression. Prior treatment for HCV was a negative predictor for this endpoint, while a higher baseline TE value was positively associated with regression.

HIV health care providers are ready to introduce pre-exposure prophylaxis in Central and Eastern Europe and neighbouring countries: data from the Euroguidelines in Central and Eastern Europe (ECEE) Network Group.

OBJECTIVES: Pre-exposure prophylaxis (PrEP) for HIV infection has been introduced in only a few European countries. We investigated the potential to provide PrEP in the Central and Eastern European region, and in neighbouring countries. METHODS: The Euroguidelines in Central and Eastern Europe (ECEE) Network Group was formed in February 2016 to review standards of care for HIV infection in the region. Information related to PrEP was collected through on-line surveys. Respondents were recruited by ECEE members based on their involvement in HIV care. RESULTS: Seventy-six respondents from 23 countries participated in the survey. Twenty-six (34.2%) respondents reported that PrEP [tenofovir disoproxil fumarate (TDF)/emtricitabine (FTC)] was registered by the drug registration authority in their country. Fifty-three (70.7%) respondents reported being aware of 'informal' PrEP use in their country. If they had access to PrEP, 56 (74.7%) would advise its use in their practice. Forty-five (59.2%) respondents had concerns regarding PrEP use, and 10 (13.3%) expressed the need for more training. Most of the respondents (88.2%) would provide PrEP to people with high-risk behaviours. CONCLUSIONS: PrEP is already used informally in some countries in the region. Physicians are keen to use PrEP if and when it is accessible. Obstacles towards implementing PrEP in those countries were mostly related to lack of national guidelines, drug registration and governmental strategy.

HIV care in times of the COVID-19 crisis - Where are we now in Central and Eastern Europe?

INTRODUCTION: The SARS-CoV-2 pandemic has hit the European region disproportionately. Many HIV clinics share staff and logistics with infectious disease facilities, which are now on the frontline in tackling COVID-19. Therefore, this study investigated the impact of the current pandemic situation on HIV care and continuity of antiretroviral treatment (ART) supplies in CEE countries. METHODS: The Euroguidelines in Central and Eastern Europe (ECEE) Network Group was established in February 2016 to review standards of care for HIV in the region. The group consists of professionals actively involved in HIV care. On March 19, 2020 we decided to review the status of HIV care sustainability in the face of the emerging SARS-CoV-2 pandemic in Europe. For this purpose, we constructed an online survey consisting of 23 questions. Respondents were recruited from ECEE members in 22 countries, based on their involvement in HIV care, and contacted via email. RESULTS: In total, 19 countries responded: Albania, Armenia, Belarus, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Estonia, Georgia, Greece, Hungary, Lithuania, Macedonia, Poland, Republic of Moldova, Russia, Serbia, Turkey, and Ukraine. Most of the respondents were infectious disease physicians directly involved in HIV care (17/19). No country reported HIV clinic closures. HIV clinics were operating normally in only six countries (31.6%). In 11 countries (57.9%) physicians were sharing HIV and COVID-19 care duties. None of the countries expected shortage of ART in the following 2 weeks; however, five physicians expressed uncertainty about the following 2 months. At the time of providing responses, ten countries (52.6%) had HIV-positive persons under quarantine. CONCLUSIONS: A shortage of resources is evident, with an impact on HIV care inevitable. We need to prepare to operate with minimal medical resources, with the aim of securing constant supplies of ART. Non-governmental organizations should re-evaluate their earlier objectives and support efforts to ensure continuity of ART delivery.

Influence of microstructural modifications induced by ultrasonic impact treatment on hardening and corrosion behavior of wrought Co-Cr-Mo biomedical alloy.

In this work, biomedical Co-28Cr-6Mo alloy is subjected to ultrasonic impact treatment (UIT). XRD, TEM and SAED analyses show that the plastic deformation induced by the UIT process results in a complex microstructural formation in surface layer of Co-28Cr-6Mo alloy. The peculiar feature observed in the alloy structure by TEM is the formation of Lomer-Cottrell locks originated by simultaneous sliding of Shockley partial dislocations in intersecting planes. At the beginning of the UIT process (till the strain extent e ≈ 0.2), dislocation pile-ups are gathered in front of the Lomer-Cottrell locks stimulating the formation of a great number of chaotic stacking faults (SFs) packets (incompletely transformed martensite), which are predominant with regard to the occurrence of ε-martensite and micro-twins. The incompletely transformed martensite hinders the shear translation through the twin boundaries and suppresses grain subdivision in surface layer of Co-28Cr-6Mo alloy at the UIT process used. On-going deformation to e ≈ 0.4 leads to further modification of microstructure in the micron-scale γ-grains, which consists of numerous Lomer-Cottrell locks, chaotic subtraction SFs, intersected nano-twins and fine lathes of ε-martensite with average size of approx. 50-100 nm. The observed structural features (at e ≈ 0.4) allow adequately explaining noticeable increase in microhardness without any cracks/cleavages in surface layer. Enhanced corrosion resistance of Co-28Cr-6Mo alloy, which manifests itself with less negative corrosion potential and lower corrosion and passivity currents in potentiodynamic curve, is promoted by the UIT induced oxide films and the following structural features: the CSL type of γ/ε interfacial boundaries, uniformly distributed fine carbides, and high fraction of the grains oriented with close packed (111)γ and (0002)ε planes parallel to the surface of the UIT-processed specimen.