Photoracemization-Based Viedma Ripening of a BINOL Derivative.

Viedma ripening is a deracemization process that has been used to deracemize a range of chiral molecules. The method has two major requirements: the compound needs to crystallize as a conglomerate and it needs to be racemizable under the crystallization conditions. Although conglomerate formation can be induced in different ways, the number of racemization methods is still rather limited. To extend the scope of Viedma ripening, in the present research we applied UV-light-induced racemization in a Viedma ripening process, and report the successful deracemization of a BINOL derivative crystallizing as a conglomerate. Irradiation by UV light activates the target compound in combination with an organic base, required to promote the excited-state proton transfer (ESPT), leading thereafter to racemization. This offers a new tool towards the development of Viedma ripening processes, by using a cheap and "green" catalytic source like UV light to racemize suitable chiral compounds.

Co-crystal Prediction by Artificial Neural Networks*.

A significant amount of attention has been given to the design and synthesis of co-crystals by both industry and academia because of its potential to change a molecule's physicochemical properties. Yet, difficulties arise when searching for adequate combinations of molecules (or coformers) to form co-crystals, hampering the efficient exploration of the target's solid-state landscape. This paper reports on the application of a data-driven co-crystal prediction method based on two types of artificial neural network models and co-crystal data present in the Cambridge Structural Database. The models accept pairs of coformers and predict whether a co-crystal is likely to form. By combining the output of multiple models of both types, our approach shows to have excellent performance on the proposed co-crystal training and validation sets, and has an estimated accuracy of 80 % for molecules for which previous co-crystallization data is unavailable.

Organothiol Monolayer Formation Directly on Muscovite Mica.

Organothiol monolayers on metal substrates (Au, Ag, Cu) and their use in a wide variety of applications have been extensively studied. Here, the growth of layers of organothiols directly onto muscovite mica is demonstrated using a simple procedure. Atomic force microscopy, surface X-ray diffraction, and vibrational sum-frequency generation IR spectroscopy studies revealed that organothiols with various functional endgroups could be self-assembled into (water) stable and adaptable ultra-flat organothiol monolayers over homogenous areas as large as 1 cm2 . The strength of the mica-organothiol interactions could be tuned by exchanging the potassium surface ions for copper ions. Several of these organothiol monolayers were subsequently used as a template for calcite growth.

The Crystalline Sponge Method in Water.

The crystalline sponge method entails the elucidation of the (absolute) structure of molecules from a solution phase using single-crystal X-ray diffraction and eliminates the need for crystals of the target compound. An important limitation for the application of the crystalline sponge method is the instability of the available crystalline sponges that can act as host crystals. The host crystal that is most often used decomposes in protic or nucleophilic solvents, or when guest molecules with Lewis basic substituents are introduced. Here a new class of (water) stable host crystals based on f-block metals is disclosed. It can be shown that these hosts not only increase the scope of the crystalline sponge method to a wider array of solvents and guests, but that they can even be applied to aqueous solutions containing hydrophilic guest molecules, thereby extending the crystalline sponge method to the important field of water-based chemistry.

Epitaxial Crystallization of Insulin on an Ordered 2D Polymer Template.

Two-dimensional polymers (2DP) are a new class of materials that consist of a monolayer of ordered molecular building blocks, which have been covalently linked. One of these monomers was self-assembled on a flat muscovite mica scaffold and subsequently the organic layer was polymerized. The resulting flat and stable 2DP layer was used as a template for protein crystallization. Crystals of insulin were epitaxially grown on the template, whereas insulin crystals grown on clean muscovite mica had a random orientation. The template was selective, considering that no epitaxially ordered crystals formed of hen egg white lysozyme, bovine serum albumin, or talin.

Racemization and Deracemization through Intermolecular Redox Behaviour.

Chiral molecules exhibiting a quinone and/or hydroquinone moiety are ubiquitous in natural products and small molecule drugs. Herein, we describe a chiral quinone-hydroquinone molecule that racemizes through a reversible redox reaction. Using a combined computational and experimental approach, we show that this racemization proceeds via an intermolecular reaction mechanism. Starting from two achiral reactants, this molecule could be obtained in enantiopure form using Viedma ripening.

Deracemization in a Complex Quaternary System with a Second-Order Asymmetric Transformation by Using Phase Diagram Studies.

A productive deracemization process based on a quaternary phase diagram study of a naphthamide derivative is reported. New racemic compounds of an atropisomeric naphthamide derivative have been discovered, and a quaternary phase diagram has been constructed that indicated that four solids are stable in a methanol/H2 O solution. Based on the results of a heterogeneous equilibria study showing the stable domain of the conglomerate, a second-order asymmetric transformation was achieved with up to 97 % ee. Furthermore, this methodology showcases the chiral separation of a stable racemic compound forming system and does not suffer from any of the typical limitations of deracemization, although application is still limited to conglomerate-forming systems. We anticipate that this present study will serve as a fundamental model for the design of sophisticated chiral separation processes.

Deracemization in a Complex Quaternary System with a Second-Order Asymmetric Transformation by Using Phase Diagram Studies.

Invited for the cover of this issue is the group of Gérard Coquerel at Université de Rouen Normandie. The image depicts a pyramid-like tetrahedron of the quaternary phase diagram showing where symmetry breaking can take place. Read the full text of the article at 10.1002/chem.201903338.

Attrition-Enhanced Deracemization of the Antimalaria Drug Mefloquine.

Mefloquine is an important drug for prevention and treatment of malaria. It is commercially available as a racemic mixture, wherein only one enantiomer is active against malaria, while the other one causes severe psychotropic effects. By converting the drug into a compound that crystallizes as a racemizable racemic conglomerate, the deracemization of mefloquine into the desired enantiomer was achieved.

Deracemization of a Racemic Compound by Using Tailor-Made Additives.

Viedma ripening is a process that combines abrasive grinding of a slurry of crystals with solution-phase racemization, resulting in solid-phase deracemization. One of the major disadvantages of Viedma ripening is that the desired compound needs to crystallize as a racemic conglomerate, accounting for only 5-10 % of all chiral molecules. Herein, we show that use of a chiral additive causes deracemization under conditions, in which the compound normally crystallizes as a racemic compound. Although this concerns a single example, it is envisioned that through this new approach the scope of Viedma ripening can be significantly expanded.

Concentration-Dependent Adsorption of CsI at the Muscovite-Electrolyte Interface.

The interfacial structure of muscovite in contact with aqueous CsI solutions was measured using surface X-ray diffraction for several CsI concentrations (2-1000 mM). At CsI concentrations up to 200 mM, Cs+ adsorption is likely hindered by H3O+, as both cations compete for the adsorption site above the muscovite hexagonal cavity. Above this concentration, more Cs+ adsorbs than is required to compensate the negatively charged muscovite surface, which means that coadsorption of an anion takes place. The I- anion does not coadsorb in an ordered manner. Moreover, the hydration ring and water layers do not change significantly as a function of the CsI concentration.

Solid-Liquid Interface Structure of Muscovite Mica in SrCl2 and BaCl2 Solutions.

The structure of the solid-liquid interface formed by muscovite mica in contact with two divalent ionic solutions (SrCl2 and BaCl2) is determined using in situ surface X-ray diffraction using both specular and non-specular crystal truncation rods. The 0.5 monolayer of monovalent potassium present at the surface after cleavage is replaced by approximately 0.25 monolayer of divalent ions, closely corresponding to ideal charge compensation within the Stern layer in both cases. The adsorption site of the divalent ions is determined to be in the surface ditrigonal cavities with minor out-of-plane relaxations that are consistent with their ionic radii. The divalent ions are adsorbed in a partly hydrated state (partial solvation sphere). The liquid ordering induced by the presence of the highly ordered crystalline mica is limited to the first 8-10 Å from the topmost crystalline surface layer. These results partly agree with previous studies in terms of interface composition, but there are significant differences regarding the structural details of these interfaces.

The structure of PbCl2 on the {100} surface of NaCl and its consequences for crystal growth.

The role that additives play in the growth of sodium chloride is a topic which has been widely researched but not always fully understood at an atomic level. Lead chloride (PbCl2) is one such additive which has been reported to have growth inhibition effects on NaCl {100} and {111}; however, no definitive evidence has been reported which details the mechanism of this interaction. In this investigation, we used the technique of surface x-ray diffraction to determine the interaction between PbCl2 and NaCl {100} and the structure at the surface. We find that Pb2+ replaces a surface Na+ ion, while a Cl- ion is located on top of the Pb2+. This leads to a charge mismatch in the bulk crystal, which, as energetically unfavourable, leads to a growth blocking effect. While this is a similar mechanism as in the anticaking agent ferrocyanide, the effect of PbCl2 is much weaker, most likely due to the fact that the Pb2+ ion can more easily desorb. Moreover, PbCl2 has an even stronger effect on NaCl {111}.

Solid-Phase Conversion of Four Stereoisomers into a Single Enantiomer.

Viedma ripening is an emerging method for the solid-phase deracemization of mixtures of enantiomers. Up to now, the scope of the method has remained limited to molecules with a single stereocenter. We show here that this method can be extended to obtain a single enantiomer from a mixture of stereoisomers with two different stereocenters. In addition, we show that by using tailor-made chiral additives, the conversion time can be reduced by a factor of 100.

Observation of Ultrathin Precursor Film Formation during Ge-Si Liquid-Phase Epitaxy from an Undersaturated Solution.

Our in situ X-ray study shows that a silicon substrate in contact with an undersaturated In(Ge) solution is wetted by an approximately 1 nm thin germanium film, which does not grow any thicker. The results can be understood by the use of thickness-dependent correlated interfacial energies. This near-equilibrium heterogeneous interface structure marks the initial stage of crystal growth before the formation of bulk material, which can only form under conditions of supersaturation. This finding uncovers a fundamental aspect of the thermodynamics at solid-liquid interfaces relevant for understanding the transition from equilibrium to supersaturation and is of importance for nanoscale solution growth methods.

Molden 2.0: quantum chemistry meets proteins.

Since the first distribution of Molden in 1995 and the publication of the first article about this software in 2000 work on Molden has continued relentlessly. A few of the many improved or fully novel features such as improved and broadened support for quantum chemistry calculations, preparation of ligands for use in drug design related softwares, and working with proteins for the purpose of ligand docking.

Solid-Liquid Interface Structure of Muscovite Mica in CsCl and RbBr Solutions.

The solid-liquid interface formed by single terminated muscovite mica in contact with two different ionic solutions is analyzed using surface X-ray diffraction. Specular and nonspecular crystal truncation rods of freshly cleaved mica immersed in CsCl or RbBr aqueous solution were measured. The half monolayer of the surface potassium ions present after the cleavage is completely replaced by the positive ions (Cs+ or Rb+) from the solution. These ions are located in the ditrigonal surface cavities with small outward relaxations with respect to the bulk potassium position. We find evidence for the presence of a partly ordered hydration shell around the surface Cs+ or Rb+ ions and partly ordered negative ions in the solution. The lateral liquid ordering induced by the crystalline surface vanishes at distances larger than 5 Å from the surface.

Viedma ripening: a reliable crystallisation method to reach single chirality.

Crystallisation processes have evolved to practical methods that allow isolation of an enantiopure product in high yield. Viedma ripening in particular enables access to enantiopure products in a reliable way, simply through grinding of crystals in a solution. This tutorial review covers the basic principles behind asymmetric crystallisation processes, with an emphasis on Viedma ripening, and shows that to date many novel organic molecules can be obtained in enantiopure solid form.

Enantiopure isoindolinones through Viedma ripening.

Here we demonstrate that deracemization of isoindolinones using Viedma ripening is possible starting from a racemic mixture of conglomerate crystals. Crystals of the enantiopure isoindolinones lose their chiral identity upon dissolution even without the need for a catalyst. This enabled complete deracemization of the reported isoindolinones without a catalyst.

Dibenzo crown ether layer formation on muscovite mica.

Stable layers of crown ethers were grown on muscovite mica using the potassium-crown ether interaction. The multilayers were grown from solution and from the vapor phase and were analyzed with atomic force microscopy (AFM), matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry, and surface X-ray diffraction (SXRD). The results show that the first molecular layer of the three investigated dibenzo crown ethers is more rigid than the second because of the strong interaction of the first molecular layer with the potassium ions on the surface of muscovite mica. SXRD measurements revealed that for all of the investigated dibenzo crown ethers the first molecule lies relatively flat whereas the second lies more upright. The SXRD measurements further revealed that the molecules of the first layer of dibenzo-15-crown-5 are on top of a potassium atom, showing that the binding mechanism of this layer is indeed of the coordination complex form. The AFM and SXRD data are in good agreement, and the combination of these techniques is therefore a powerful way to determine the molecular orientation at surfaces.