Quantum Photoinitiators: Toward Emerging Photocuring Applications.

Semiconductor nanocrystals are promising photocatalysts for a wide range of applications, ranging from alternative fuel generation to biomedical and environmental applications. This stems from their diverse properties, including flexible spectral tunability, stability, and photocatalytic efficiencies. Their functionality depends on the complex influence of multiple parameters, including their composition, dimensions, architecture, surface coating, and environmental conditions. A particularly promising direction for rapid adoption of these nanoparticles as photocatalysts is their ability to act as photoinitiators (PIs) for radical polymerization. Previous studies served to demonstrate the proof of concept for the use of quantum confined semiconductor nanocrystals as photoinitiators, coining the term Quantum PIs, and provided insights for their photocatalytic mechanism of action. However, these early reports suffered from low efficiencies while requiring purging with inert gases, use of additives, and irradiation by high light intensities with very long excitation durations, which limited their potential for real-life applications. The progress in nanocrystal syntheses and surface engineering has opened the way to the introduction of the next generation of Quantum PIs. Herein, we introduce the research area of nanocrystal photocatalysts, review their studies as Quantum PIs for radical polymerization, from suspension polymerization to novel printing, as well as in a new family of polymerization techniques, of reversible deactivation radical polymerization, and provide a forward-looking view for the challenges and prospects of this field.

Neck Barrier Engineering in Quantum Dot Dimer Molecules via Intraparticle Ripening.

Coupled colloidal quantum dot (CQD) dimers represent a new class of artificial molecules composed of fused core/shell semiconductor nanocrystals. The electronic coupling and wave function hybridization are enabled by the formation of an epitaxial connection with a coherent lattice between the shells of the two neighboring quantum dots where the shell material and its dimensions dictate the quantum barrier characteristics for the charge carriers. Herein we introduce a colloidal approach to control the neck formation at the interface between the two CQDs in such artificial molecular constructs. This allows the tailoring of the neck barrier in prelinked homodimers formed via fusion of multifaceted wurtzite CdSe/CdS CQDs. The effects of reaction time, temperature, and excess ligands are studied. The neck filling process follows an intraparticle ripening mechanism at relatively mild reaction conditions while avoiding interparticle ripening. The degree of surface ligand passivation plays a key role in activating the surface atom diffusion to the neck region. The degree of neck filling strongly depends also on the initial relative orientation of the two CQDs, where homonymous plane attachment allows for facile neck growth, unlike the case of heteronymous plane attachment. Upon neck filling, the observed red-shift of the absorption and fluorescence measured both for ensemble and single dimers is assigned to enhanced hybridization of the confined wave function in CQD dimer molecules, as supported by quantum calculations. The fine-tuning of the particle interface introduced herein provides therefore a powerful tool to further control the extent of hybridization and coupling in CQD molecules.

Semiconductor Bow-Tie Nanoantenna from Coupled Colloidal Quantum Dot Molecules.

Top-down fabricated nanoantenna architectures of both metallic and dielectric materials show powerful functionalities for Raman and fluorescence enhancement with relevance to single molecule sensing while inducing directionality of chromophore emission with implications for single photon sources. We synthesize the smallest bow-tie nanoantenna by selective tip-to-tip fusion of two tetrahedral colloidal quantum dots (CQDs) forming a dimer. While the tetrahedral monomers emit non-polarized light, the bow-tie architecture manifests nanoantenna functionality of enhanced emission polarization along the bow-tie axis, as predicted theoretically and revealed by single-particle spectroscopy. Theory also predicts the formation of an electric-field hotspot at the bow-tie epicenter. This is utilized for selective light-induced photocatalytic metal growth at that location, unlike growth on the free tips in dark conditions, thus demonstrating bow-tie dimer functionality as a photochemical reaction center.

Liposomes of Quantum Dots Configured for Passive and Active Delivery to Tumor Tissue.

The majority of developed and approved anticancer nanomedicines have been designed to exploit the dogma of the enhanced permeability and retention (EPR) effect, which is based on the leakiness of the tumor's blood vessels accompanied by impeded lymphatic drainage. However, the EPR effect has been under scrutiny recently because of its variable manifestation across tumor types and animal species and its poor translation to human cancer therapy. To facilitate the EPR effect, systemically injected NPs should overcome the obstacle of rapid recognition and elimination by the mononuclear phagocyte system (MPS). We hypothesized that circulating monocytes, major cells of the MPS that infiltrate the tumor, may serve as an alternative method for achieving increased tumor accumulation of NPs, independent of the EPR effect. We describe here the accumulation of liposomal quantum dots (LipQDs) designed for active delivery via monocytes, in comparison to LipQDs designed for passive delivery (via the EPR effect), following IV administration in a mammary carcinoma model. Hydrophilic QDs were synthesized and entrapped in functionalized liposomes, conferring passive ("stealth" NPs; PEGylated, neutral charge) and active (monocyte-mediated delivery; positively charged) properties by differing in their lipid composition, membrane PEGylation, and charge (positively, negatively, and neutrally charged). The various physicochemical parameters affecting the entrapment yield and optical stability were examined in vitro and in vivo. Biodistribution in the blood, various organs, and in the tumor was determined by the fluorescence intensity and Cd analyses. Following the treatment of animals (intact and mammary-carcinoma-bearing mice) with disparate formulations of LipQDs (differing by their lipid composition, neutrally and positively charged surfaces, and hydrophilic membrane), we demonstrate comparable tumor uptake of QDs delivered by the passive and the active routes (mainly by Ly-6Chi monocytes). Our findings suggest that entrapping QDs in nanosized liposomal formulations, prepared by a new facile method, imparts superior structural and optical stability and a suitable biodistribution profile leading to increased tumor uptake of fluorescently stable QDs.

Fear and C-reactive protein cosynergize annual pulse increases in healthy adults.

Recent international terror outbreaks notably involve long-term mental health risks to the exposed population, but whether physical health risks are also anticipated has remained unknown. Here, we report fear of terror-induced annual increases in resting heart rate (pulse), a notable risk factor of all-cause mortality. Partial least squares analysis based on 325 measured parameters successfully predicted annual pulse increases, inverse to the expected age-related pulse decline, in approximately 4.1% of a cohort of 17,380 apparently healthy active Israeli adults. Nonbiased hierarchical regression analysis among 27 of those parameters identified pertinent fear of terror combined with the inflammatory biomarker C-reactive protein as prominent coregulators of the observed annual pulse increases. In comparison, basal pulse primarily depended on general physiological parameters and reduced cholinergic control over anxiety and inflammation, together indicating that consistent exposure to terror threats ignites fear-induced exacerbation of preexisting neuro-immune risks of all-cause mortality.

Rapid Three-Dimensional Printing in Water Using Semiconductor-Metal Hybrid Nanoparticles as Photoinitiators.

Additive manufacturing processes enable fabrication of complex and functional three-dimensional (3D) objects ranging from engine parts to artificial organs. Photopolymerization, which is the most versatile technology enabling such processes through 3D printing, utilizes photoinitiators that break into radicals upon light absorption. We report on a new family of photoinitiators for 3D printing based on hybrid semiconductor-metal nanoparticles. Unlike conventional photoinitiators that are consumed upon irradiation, these particles form radicals through a photocatalytic process. Light absorption by the semiconductor nanorod is followed by charge separation and electron transfer to the metal tip, enabling redox reactions to form radicals in aerobic conditions. In particular, we demonstrate their use in 3D printing in water, where they simultaneously form hydroxyl radicals for the polymerization and consume dissolved oxygen that is a known inhibitor. We also demonstrate their potential for two-photon polymerization due to their giant two-photon absorption cross section.

Carbon Nanotube and Semiconductor Nanorods Hybrids: Preparation, Characterization, and Evaluation of Photocurrent Generation.

Carbon nanotubes (CNTs) and semiconductor nanocrystals (SCNCs) are known to be interesting donor-acceptor partners due to their unique optical and electronic properties. These exciting features have led to the development of novel composites based on these two nanomaterials and to their characterization for use in various applications, such as components in sensors, transistors, solar cells and biomedical devices. Two approaches based on covalent and noncovalent methods have been suggested for coupling the SCNCs to CNTs. Most covalent conjugation methods used so far were found to disrupt the electronic structure of the CNTs or interfere with charge transfer in the CNT-SCNC interface. Moreover, it offers random and poorly organized nanoparticle coatings. Therefore, noncovalent methods are considered to be ideal for better electronic coupling. However, a key common drawback of noncovalent methods is the lack of stability which hampers their applicability. In this article, a method has been developed to couple semiconductor seeded nanorods onto CNTs through π-π interactions. The CNTs and pyrene conjugated SCNC hybrid materials were characterized by both microscopic and spectroscopic techniques. Fluorescence and photocurrent measurements suggest the proposed pi-stacking approach results in a strong electronic coupling between the CNTs and the SCNCs leading to better photocurrent efficiency than that of a covalent conjugation method reported using similar SCNC material. Overall, the CNT-SCNC films reported in the present study open the scope for the fabrication of optoelectronic devices for various applications.

Photocatalytic Reactive Oxygen Species Formation by Semiconductor-Metal Hybrid Nanoparticles. Toward Light-Induced Modulation of Biological Processes.

Semiconductor-metal hybrid nanoparticles manifest efficient light-induced spatial charge separation at the semiconductor-metal interface, as demonstrated by their use for hydrogen generation via water splitting. Here, we pioneer a study of their functionality as efficient photocatalysts for the formation of reactive oxygen species. We observed enhanced photocatalytic activity forming hydrogen peroxide, superoxide, and hydroxyl radicals upon light excitation, which was significantly larger than that of the semiconductor nanocrystals, attributed to the charge separation and the catalytic function of the metal tip. We used this photocatalytic functionality for modulating the enzymatic activity of horseradish peroxidase as a model system, demonstrating the potential use of hybrid nanoparticles as active agents for controlling biological processes through illumination. The capability to produce reactive oxygen species by illumination on-demand enhances the available peroxidase-based tools for research and opens the path for studying biological processes at high spatiotemporal resolution, laying the foundation for developing novel therapeutic approaches.

Effect of surface coating on the photocatalytic function of hybrid CdS-Au nanorods.

Hybrid semiconductor-metal nanoparticles are interesting materials for use as photocatalysts due to their tunable properties and chemical processibility. Their function in the evolution of hydrogen in photocatalytic water splitting is the subject of intense current investigation. Here, the effects of the surface coatings on the photocatalytic function are studied, with Au-tipped CdS nanorods as a model hybrid nanoparticle system. Kinetic measurements of the hydrogen evolution rate following photocatalytic water reduction are performed on similar nanoparticles but with different surface coatings, including various types of thiolated alkyl ligands and different polymer coatings. The apparent hydrogen evolution quantum yields are found to strongly depend on the surface coating. The lowest yields are observed for thiolated alkyl ligands. Intermediate values are obtained with L-glutathione and poly(styrene-co-maleic anhydride) polymer coatings. The highest efficiency is obtained for polyethylenimine (PEI) polymer coating. These pronounced differences in the photocatalytic efficiencies are correlated with ultrafast transient absorption spectroscopy measurements, which show a faster bleach recovery for the PEI-coated hybrid nanoparticles, consistent with faster and more efficient charge separation. These differences are primarily attributed to the effects of surface passivation by the different coatings affecting the surface trapping of charge carriers that compete with effective charge separation required for the photocatalysis. Further support of this assignment is provided from steady-state emission and time-resolved spectral measurements, performed on related strongly fluorescing CdSe/CdS nanorods. The control and understanding of the effect of the surface coating of the hybrid nanosystems on the photocatalytic processes is of importance for the potential application of hybrid nanoparticles as photocatalysts.

Semiconductor nanorod-carbon nanotube biomimetic films for wire-free photostimulation of blind retinas.

We report the development of a semiconductor nanorod-carbon nanotube based platform for wire-free, light induced retina stimulation. A plasma polymerized acrylic acid midlayer was used to achieve covalent conjugation of semiconductor nanorods directly onto neuro-adhesive, three-dimensional carbon nanotube surfaces. Photocurrent, photovoltage, and fluorescence lifetime measurements validate efficient charge transfer between the nanorods and the carbon nanotube films. Successful stimulation of a light-insensitive chick retina suggests the potential use of this novel platform in future artificial retina applications.

Decline in serum cholinesterase activities predicts 2-year major adverse cardiac events.

Parasympathetic activity influences long-term outcome in patients with cardiovascular disease, but the underlying mechanism(s) linking parasympathetic activity and the occurrence of major adverse cardiovascular events (MACEs) are incompletely understood. The aim of this pilot study was to evaluate the association between serum cholinesterase activities as parasympathetic biomarkers and the risk for the occurrence of MACEs. Cholinergic status was determined by measuring the cumulative capacity of serum acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) to hydrolyze the AChE substrate acetylthiocholine. Cholinergic status was evaluated in randomly selected patients undergoing cardiac catheterization. The patients were divided into two groups of 100 patients in each group, with or without occurrence of MACEs during a follow-up period of 40 months. Cox regression models adjusted for potential clinical, metabolic and inflammatory confounders served to evaluate association with clinical outcome. We found that patients with MACE presented lower cholinergic status and AChE values at catheterization (1,127 ± 422 and 359 ± 153 nmol substrate hydrolyzed per minute per milliliter, respectively) than no-MACE patients (1,760 ± 546 and 508 ± 183 nmol substrate hydrolyzed per minute per milliliter, p < 0.001 and p < 0.001, respectively), whose levels were comparable to those of matched healthy controls (1,622 ± 303 and 504 ± 126 nmol substrate hydrolyzed per minute per milliliter, respectively). In a multivariate analysis, patients with AChE or total cholinergic status values below median showed conspicuously elevated risk for MACE (hazard ratio 1.85 [95% confidence interval [CI] 1.09-3.15, p = 0.02] and 2.21 [95% CI 1.22-4.00, p = 0.009]) compared with those above median, even after adjusting for potential confounders. We conclude that parasympathetic dysfunction expressed as reduced serum AChE and AChE activities in patients compared to healthy controls can together reflect impaired parasympathetic activity. This impairment predicts the risk of MACE up to 40 months in such patients. Monitoring these parasympathetic parameters might help in the risk stratification of patients with cardiovascular disease.

ZnO Quantum Photoinitiators as an All-in-One Solution for Multifunctional Photopolymer Nanocomposites.

Nanocomposites are constructed from a matrix material combined with dispersed nanosized filler particles. Such a combination yields a powerful ability to tailor the desired mechanical, optical, electrical, thermodynamic, and antimicrobial material properties. Colloidal semiconductor nanocrystals (SCNCs) are exciting potential fillers, as they display size-, shape-, and composition-controlled properties and are easily embedded in diverse matrices. Here we present their role as quantum photoinitiators (QPIs) in acrylate-based polymer, where they act as a catalytic radical initiator and endow the system with mechanical, photocatalytic, and antimicrobial properties. By utilizing ZnO nanorods (NRs) as QPIs, we were able to increase the tensile strength and elongation at break of poly(ethylene glycol) diacrylate (PEGDA) hydrogels by up to 85%, unlike the use of the same ZnO NRs acting merely as fillers. Simultaneously, we endowed the PEGDA hydrogels with post-polymerization photocatalytic and antimicrobial activities and showed their ability to decompose methylene blue and significantly eradicate antibiotic-resistant bacteria and viral pathogens. Moreover, we demonstrate two fabrication showcase methods, traditional molding and digital light processing printing, that can yield hydrogels with complex architectures. These results position SCNC-based systems as promising candidates to act as all-in-one photoinitiators and fillers in nanocomposites for diverse biomedical applications, where specific and purpose-oriented characteristics are required.

Sulfide Ligands in Hybrid Semiconductor-Metal Nanocrystal Photocatalysts: Improved Hole Extraction and Altered Catalysis.

Hybrid semiconductor-metal nanocrystals manifest efficient photocatalytic activity related to the metal domain promoting charge carrier separation and providing an active catalytic site. The surface properties of such nanoparticles are also of paramount importance in determining their photocatalytic activity. Addressing the combination of surface effects in catalysis on metals, with the electronic properties of hybrid nanoparticles, we examined the effect of coating CdS-Au hybrid nanoparticles with sulfide, an anion that is expected to bind strongly to both domains, on the photocatalytic functionality. Upon sulfide coating, one-electron processes - namely the oxidative production of hydroxyl radicals and the reductive production of superoxide - were increased, whereas the activity for two-electron reduction processes - H2 and hydrogen peroxide generation - was hampered. These findings indicate a double-edged sword effect for sulfide coating that on one side relieves the hole extraction bottleneck from the semiconductor segment and, on the other hand, poisons the metal domain restricting its reductive capacity for the two-electron processes requiring a chemisorption step on the metal surface. The work further demonstrates the importance of surface properties for the photocatalytic action of such hybrid nanoparticle systems.

Flow synthesis of photocatalytic semiconductor-metal hybrid nanocrystals.

Semiconductor-metal hybrid nanostructures are promising materials for photocatalytic applications, providing high efficiencies compared to their composing counterparts. So far, the synthesis of such hybrid nanoparticles was limited to batch reactors, achieving tunability while demonstrating how each of the nanocrystals' characteristics affects photocatalytic performances. Yet, new methodologies should be established to increase the synthetic yield while maintaining high control over the resulting structures. Herein, scalable advanced flow techniques are introduced, yielding ZnSe-metal hybrid nanoparticles either in a thermal growth or photo-induced growth regime. Firstly, thermal gold growth in the flow reactor is achieved with good control over the metal tip size and the nanoparticle morphology. We address the dependence of the reaction on temperature, the precursor to nanorod molar ratios, and additional parameters. Additionally, light-induced growth by the flow reactor is demonstrated for platinum clusters. The quality of the resulting hybrids is directly demonstrated by their functionality in photocatalytic hydrogen generation by water reduction, displaying enhanced activity compared to bare ZnSe nanorods. The fairly straightforward adaptation of such powerful flow-reaction techniques to scale-up photocatalytic hybrid nanoparticle syntheses takes them one step forwards towards the realization of their potential in real-life application scenarios.

Butyrylcholinesterase interactions with amylin may protect pancreatic cells in metabolic syndrome.

The metabolic syndrome (MetS) is a risk factor for type 2 diabetes mellitus (T2DM). However, the mechanisms underlying the transition from MetS to T2DM are unknown. Our goal was to study the potential contribution of butyrylcholinesterase (BChE) to this process. We first determined the hydrolytic activity of BChE in serum from MetS, T2DM and healthy individuals. The 'Kalow' variant of BChE (BChE-K), which has been proposed to be a risk factor for T2DM, was genotyped in the last two groups. Our results show that in MetS patients serum BChE activity is elevated compared to T2DM patients and healthy controls (P < 0.001). The BChE-K genotype showed similar prevalence in T2DM and healthy individuals, excluding this genotype as a risk factor for T2DM. However, the activity differences remained unexplained. Previous results from our laboratory have shown BChE to attenuate the formation of ß-amyloid fibrils, and protect cultured neurons from their cytotoxicity. Therefore, we next studied the in vitro interactions between recombinant human butyrylcholinesterase and amylin by surface plasmon resonance, Thioflavine T fluorescence assay and cross-linking, and used cultured pancreatic ß cells to test protection by BChE from amylin cytotoxicity. We demonstrate that BChE interacts with amylin through its core domain and efficiently attenuates both amylin fibril and oligomer formation. Furthermore, application of BChE to cultured ß cells protects them from amylin cytotoxicity. Taken together, our results suggest that MetS-associated BChE increases could protect pancreatic ß-cells in vivo by decreasing the formation of toxic amylin oligomers.

Morphology effect on zinc oxide quantum photoinitiators for radical polymerization.

Semiconductor nanocrystal based photoinitiators, quantum PIs, are a viable alternative to organic photoinitiators demonstrating unique advantages, including a broad and tunable excitation window, limited migration, and more. Aiming towards efficient quantum PIs with tunable properties, a deeper understanding of the relationships between the nanoparticle properties and their efficiency is required. Herein, we studied the morphological effect on ZnO nanocrystals functioning as photoinitiators in both water-based and solvent-free formulations by comparing rod and pyramidal shaped particles of similar volumes and nearly identical surface area. Superior polymerization performances are measured for the nanorods. Photocatalytic characterization including oxygen consumption and reactive oxygen species formation as well as dyes reduction and oxidation, also showed enhanced activities for the nanorods. The different performances were attributed to the anisotropic nanorod morphology which is beneficial for charge separation as well as to the presence of a reactive [0001] facet in the nanorods, which is known to increase the adsorption of molecular oxygen and anionic molecules, thus affecting the catalytic activity. These observations, along with the higher photoinitiation efficiency of the ZnO nanorods, bring them closer to functionality as photoinitiators in numerous photopolymerization applications.

Targeting and imaging of monocyte-derived macrophages in rat's injured artery following local delivery of liposomal quantum dots.

Quantum dots offer superior optical features and hold a great potential as an imaging tool in comparison to 'conventional' fluorescent dyes. However, in vivo application in inflammatory-associated disorders is limited due to potential toxicity following systemic administration. Vascular inflammation contributes to cardiovascular diseases such as restenosis (re-narrowing of the artery following angioplasty), and poor prognosis is associated with the increased number of monocytes-derived macrophages (MDMs) in the arterial wall. Local administration of a suitable delivery system targeting MDMs could provide effective fluorescent imaging while minimizing systemic exposure and toxicity. We report here on the physicochemical characteristics and the structural stability of MDMs-targeted liposomal QDs (LipQDs), cellular uptake and cytotoxicity, the systemic biodistribution of LipQDs following local intra-luminal administration of LipQDs in carotid-injured rats vs. systemic administration, and imaging of QDs in the arterial tissue. The local treatment with LipQDs was found to be a suitable approach for targeting QDs to MDMs in the injured artery. In contrast to free QDs, the LipQDs formulation exhibited unique properties including structural and fluorescent stability, increased accumulation and retention for up to 24 h, and targeting properties enabling imaging of MDMs. MDMs imaging by targeted nanoparticles (NPs) could potentially serve for the detection of MDMs density in the injured artery for diagnostic purposes.

Blood acetylcholinesterase activity is associated with increased 10 year all-cause mortality following coronary angiography.

BACKGROUND AND AIMS: Parasympathetic dysfunction is associated with increased risk for major adverse cardiovascular events (MACE). However, clinically validated biomarkers that reflect parasympathetic activity are not yet available. We sought to assess the ability of serum cholinesterase activity to predict long term survival in patients undergoing coronary angiography. METHODS: We prospectively followed 1002 consecutive patients undergoing clinically indicated coronary angiography (acute coronary syndrome or stable angina). We measured blood acetylcholinesterase (AChE) activity using the acetylcholine analog acetylthiocholine. Mortality rates were determined up to 10 years of follow-up. We divided our cohort into 3 groups with low, intermediate and high AChE activity by a Chi-square automatic interaction detection method (CHAID). RESULTS: Patients with lower than cutoff levels of AChE (<300 nmol/min/ml) had higher mortality rates over 10 years of follow-up, after adjusting for conventional risk factors, biomarkers, clinical indication, and use of medications (HR = 1.6, 95% CI 1.1-2.5, p = 0.02). Patients with intermediate levels of AChE (300-582 nmol/min/ml) were also at increased risk for death (HR = 1.4, 95% CI 1.1-1.9, p = 0.02). AChE was inversely correlated with C-reactive protein, troponin I, fibrinogen and neutrophil/lymphocyte ratio levels. CONCLUSIONS: Patients presenting for coronary angiography with low levels of serum AChE activity are at increased risk for death during long term follow-up.

A clear solution: semiconductor nanocrystals as photoinitiators in solvent free polymerization.

Semiconductor nanocrystals have been shown to have unique advantages over traditional organic photoinitiators for polymerization in solution. However, efficient photoinitiation with such nanoparticles in solvent-free and additive-free formulations so far has not been achieved. Herein, the ability to use semiconductor nanocrystals for efficient bulk polymerization as sole initiators is reported, operating under modern UV-blue-LED light sources found in 3D printers and other photocuring applications. Hybrid semiconductor-metal nanorods exhibit superior photoinitiation capability to their pristine semiconductor counterparts, attributed to the enhanced charge separation and oxygen consumption in such systems. Moreover, photoinitiation by semiconductor nanocrystals overcoated by inorganic ligands is reported, thus increasing the scope of possible applications and shedding light on the photoinitiation mechanism; in light of the results, two possible pathways are discussed - ligand-mediated and cation-coordinated oxidation. A demonstration of the unique attributes of the quantum photoinitiators is reported in their use for high-resolution two-photon printing of optically fluorescing microstructures, demonstrating a multi-functionality capability. The bulk polymerization demonstrated here can be advantageous over solvent based methods as it alleviates the need of post-polymerization drying and reduces waste and exposure to toxic solvents, as well as broadens the possible use of quantum photoinitiators for industrial and research uses.

Strain-controlled shell morphology on quantum rods.

Semiconductor heterostructure nanocrystals, especially with core/shell architectures, are important for numerous applications. Here we show that by decreasing the shell growth rate the morphology of ZnS shells on ZnSe quantum rods can be tuned from flat to islands-like, which decreases the interfacial strain energy. Further reduced growth speed, approaching the thermodynamic limit, leads to coherent shell growth forming unique helical-shell morphology. This reveals a template-free mechanism for induced chirality at the nanoscale. The helical morphology minimizes the sum of the strain and surface energy and maintains band gap emission due to its coherent core/shell interface without traps, unlike the other morphologies. Reaching the thermodynamic controlled growth regime for colloidal semiconductor core/shell nanocrystals thus offers morphologies with clear impact on their applicative potential.