Switching between the [2π+2σ] and Hetero-[4π+2σ] Cycloaddition Reactivity of Bicyclobutanes with Lewis Acid Catalysts Enables the Synthesis of Spirocycles and Bridged Heterocycles.

The exploration of the complex chemical diversity of bicyclo[n.1.1]alkanes and their use as benzene bioisosteres has garnered significant attention over the past two decades. Regiodivergent syntheses of thiabicyclo[4.1.1]octanes (S-BCOs) and highly substituted bicyclo[2.1.1]hexanes (BCHs) using a Lewis acid-catalyzed formal cycloaddition of bicyclobutanes (BCBs) and 3-benzylideneindoline-2-thione derivatives have been established. The first hetero-(4+3) cycloaddition of BCBs, catalyzed by Zn(OTf)2, was achieved with a broad substrate scope under mild conditions. In contrast, the less electrophilic BCB ester undergoes a Sc(OTf)3-catalyzed [2π+2σ] reaction with 1,1,2-trisubstituted alkenes, yielding BCHs with a spirocyclic quaternary carbon center. Control experiments and preliminary theoretical calculations suggest that the diastereoselective [2π+2σ] product formation may involve a concerted cycloaddition between a zwitterionic intermediate and E-1,1,2-trisubstituted alkenes. Additionally, the hetero-(4+3) cycloaddition may involve a concerted nucleophilic ring-opening mechanism.

Hydrogenation of CO2 to Light Olefins over ZnZrOx /SSZ-13.

Converting CO2 to olefins is an ideal route to achieve carbon neutrality. However, selective hydrogenation to light olefins, especially single-component olefin, while reducing CH4 formation remains a great challenge. Herein, we developed ZnZrOx /SSZ-13 tandem catalyst for the highly selective hydrogenation of CO2 to light olefins. This catalyst shows C2 = -C4 = and propylene selectivity up to 89.4 % and 52 %, respectively, while CH4 is suppressed down to 2 %, and there is no obvious deactivation. It is demonstrated that the isolated moderate Brønsted acid sites (BAS) of SSZ-13 promotes the rapid conversion of intermediate species derived from ZnZrOx , thereby enhancing the kinetic coupling of the reactions and inhibit the formation of alkanes and improve the light olefins selectivity. Besides, the weaker BAS of SSZ-13 promote the conversion of intermediates into aromatics with 4-6 methyl groups, which is conducive to the aromatics cycle. Accordingly, more propene can be obtained by elevating the Si/Al ratio of SSZ-13. This provides an efficient strategy for CO2 hydrogenation to light olefins with high selectivity.

Asymmetric Sites on the ZnZrOx Catalyst for Promoting Formate Formation and Transformation in CO2 Hydrogenation.

The role of formate species for CO2 hydrogenation is still under debate. Although formate has been frequently observed and commonly proposed as the possible intermediate, there is no definite evidence for the reaction of formate species for methanol production. Here, formate formation and conversion over the ZnZrOx solid solution catalyst are investigated by in situ/operando diffuse reflectance infrared Fourier transform spectroscopy-mass spectroscopy (DRIFTS-MS) coupled with density functional theory (DFT) calculations. Spectroscopic results show that bidentate carbonate formed from CO2 adsorption is hydrogenated to formate on Zn-O-Zr sites (asymmetric sites), where the Zn site is responsible for H2 activation and the Zr site is beneficial for the stabilization of reaction intermediates. The asymmetric Zn-O-Zr sites with adjacent and inequivalent features on the ZnZrOx catalyst promote not only formate formation but also its transformation. Both theoretical and experimental results demonstrate that the origin of the excellent performance of the ZnZrOx catalyst for methanol formation is associated with the H2 heterolytic cleavage promoted by the asymmetric Zn and Zr sites.

Unprecedentedly high formic acid dehydrogenation activity on an iridium complex with an N,N'-diimine ligand in water.

Hydrogen production from the dehydrogenation of formic acid (FA) is promising. Most of the current catalysts for FA dehydrogenation are effective only in the presence of bases or additives. We report here newly developed iridium complexes containing conjugated N,N'-diimine ligands for FA dehydrogenation in water without the addition of bases or additives. A turnover frequency (TOF) of 487 500 h(-1) with [Cp*Ir(L1)Cl]Cl (L1=2,2'-bi-2-imidazoline) at 90 °C and a turnover number (TON) of 2 400 000 with in situ prepared catalyst from [IrCp*Cl2 ]2 and 2,2'-bi-1,4,5,6-tetrahydropyrimidine (L2) at 80 °C were obtained, the highest values reported for FA dehydrogenation to date. A mechanistic study reveals that the formation of [Ir-H] intermediate species is the rate-determining step in the catalytic cycle.

Graph-based peak alignment algorithms for multiple liquid chromatography-mass spectrometry datasets.

UNLABELLED: Liquid chromatography coupled to mass spectrometry (LC-MS) is the dominant technological platform for proteomics. An LC-MS analysis of a complex biological sample can be visualized as a 'map' of which the positional coordinates are the mass-to-charge ratio (m/z) and chromatographic retention time (RT) of the chemical species profiled. Label-free quantitative proteomics requires the alignment and comparison of multiple LC-MS maps to ascertain the reproducibility of experiments or reveal proteome changes under different conditions. The main challenge in this task lies in correcting inevitable RT shifts. Similar, but not identical, LC instruments and settings can cause peptides to elute at very different times and sometimes in a different order, violating the assumptions of many state-of-the-art alignment tools. To meet this challenge, we developed LWBMatch, a new algorithm based on weighted bipartite matching. Unlike existing tools, which search for accurate warping functions to correct RT shifts, we directly seek a peak-to-peak mapping by maximizing a global similarity function between two LC-MS maps. For alignment tasks with large RT shifts (>500 s), an approximate warping function is determined by locally weighted scatterplot smoothing of potential matched features, detected using a novel voting scheme based on co-elution. For validation, we defined the ground truth for alignment success based on tandem mass spectrometry identifications from sequence searching. We showed that our method outperforms several existing tools in terms of precision and recall, and is capable of aligning maps from different instruments and settings. AVAILABILITY: Available at https://sourceforge.net/projects/rt-alignment/.

Highly selective conversion of CO2 to para-xylene over tandem catalysts.

ZnZrO/Mg-Si-ZSM-5 tandem catalysts enable CO2 hydrogenation to para-xylene (PX) with PX selectivity up to 28% and a proportion of PX in xylene up to 84%. SiO2 and MgO modification increases the PX selectivity by reducing the Brønsted acid sites and reducing the pore size of the zeolite.

CO2 Hydrogenation to Methanol over Cd4/TiO2 Catalyst: Insight into Multifunctional Interface.

Supported metal catalysts have shown to be efficient for CO2 conversion due to their multifunctionality and high stability. Herein, we have combined density functional theory calculations with microkinetic modeling to investigate the catalytic reaction mechanisms of CO2 hydrogenation to CH3OH over a recently reported catalyst of Cd4/TiO2. Calculations reveal that the metal-oxide interface is the active center for CO2 hydrogenation and methanol formation via the formate pathway dominates over the reverse water-gas shift (RWGS) pathway. Microkinetic modeling demonstrated that formate species on the surface of Cd4/TiO2 is the relevant intermediate for the production of CH3OH, and CH2O# formation is the rate-determining step. These findings demonstrate the crucial role of the Cd-TiO2 interface for controlling the CO2 reduction reactivity and CH3OH selectivity.

Hydrogenation of Carbon Dioxide to Methanol over Non-Cu-based Heterogeneous Catalysts.

The increasing atmospheric CO2 level makes CO2 reduction an urgent challenge facing the world. Catalytic transformation of CO2 into chemicals and fuels utilizing renewable energy is one of the promising approaches toward alleviating CO2 emissions. In particular, the selective hydrogenation of CO2 to methanol utilizing renewable hydrogen potentially enables large scale transformation of CO2 . The Cu-based catalysts have been extensively investigated in CO2 hydrogenation. However, it is not only limited by long-term instability but also displays unsatisfactory catalytic performance. The supported metal-based catalysts (Pd, Pt, Au, and Ag) can achieve high methanol selectivity at low temperatures. The mixed oxide catalysts represented by Ma ZrOx (Ma =Zn, Ga, and Cd) solid solution catalysts present high methanol selectivity and catalytic activity as well as excellent stability. This Review focuses on the recent advances in developing Non-Cu-based heterogeneous catalysts and current understandings of catalyst design and catalytic performance. First, the thermodynamics of CO2 hydrogenation to methanol is discussed. Then, the progress in supported metal-based catalysts, bimetallic alloys or intermetallic compounds catalysts, and mixed oxide catalysts is discussed. Finally, a summary and a perspective are presented.

A highly selective and stable ZnO-ZrO2 solid solution catalyst for CO2 hydrogenation to methanol.

Although methanol synthesis via CO hydrogenation has been industrialized, CO2 hydrogenation to methanol still confronts great obstacles of low methanol selectivity and poor stability, particularly for supported metal catalysts under industrial conditions. We report a binary metal oxide, ZnO-ZrO2 solid solution catalyst, which can achieve methanol selectivity of up to 86 to 91% with CO2 single-pass conversion of more than 10% under reaction conditions of 5.0 MPa, 24,000 ml/(g hour), H2/CO2 = 3:1 to 4:1, 320° to 315°C. Experimental and theoretical results indicate that the synergetic effect between Zn and Zr sites results in the excellent performance. The ZnO-ZrO2 solid solution catalyst shows high stability for at least 500 hours on stream and is also resistant to sintering at higher temperatures. Moreover, no deactivation is observed in the presence of 50 ppm SO2 or H2S in the reaction stream.

Intestinal trefoil factor increased the Bcl-2 level in a necrotizingenterocolitis neonate rat model.

BACKGROUND/AIM: The aim of this study was to investigate the therapeutic effect of intestinal trefoil factor (ITF) on necrotizing enterocolitis (NEC) by observing the pathological changes and detecting the protein level differences in Caspase-3, Bax, and Bcl-2 in an NEC neonate rat model. MATERIALS AND METHODS: A Wistar rat model of NEC was established and 30 one-day-old neonate Wistar rats were randomly divided into three groups including a normal control (group A), NEC rats treated with 0.2 ml physiological saline through intraperitoneal (i.p.) injection (group B), and NEC rats treated with 0.2 mg ITF by i.p injection (group C). RESULTS: Compared with group B, there were statistically significant differences in Caspase-3, Bax, and Bcl-2 levels in groups A and C(P < 0.05). Moreover, there was a significant difference in the Bcl-2 level between groups A and B (P < 0.05). CONCLUSION: ITF alleviated injury of the intestinal tract in neonate rats with NEC and this mechanism was possibly related to a reduction in the expression of Caspase-3 and Bax and the increase in Bcl-2 expression.

Effect of Mn and Fe on the Formation of Fe- and Mn-Rich Intermetallics in Al-5Mg-Mn Alloys Solidified Under Near-Rapid Cooling.

Mn was an important alloying element used in Al-Mg-Mn alloys. However, it had to be limited to a low level (<1.0 wt %) to avoid the formation of coarse intermetallics. In order to take full advantage of the benefits of Mn, research was carried out to investigate the possibility of increasing the content of Mn by studying the effect of cooling rate on the formation of Fe- and Mn-rich intermetallics at different content levels of Mn and Fe. The results indicated that in Al-5Mg-Mn alloy with low Fe content (<0.1 wt %), intermetallic Al6(Fe,Mn) was small in size and amount. With increasing Mn content, intermetallic Al6(Fe,Mn) increased, but in limited amount. In high-Fe-containing Al-5Mg-Mn alloys (0.5 wt % Fe), intermetallic Al6(Fe,Mn) became the dominant phase, even in the alloy with low Mn content (0.39 wt %). Cooling rate played a critical role in the refinement of the intermetallics. Under near-rapid cooling, intermetallic Al6(Fe,Mn) was extremely refined. Even in the high Mn and/or high-Fe-containing alloys, it still demonstrated fine Chinese script structures. However, once the alloy composition passed beyond the eutectic point, the primary intermetallic Al6(Fe,Mn) phase displayed extremely coarse platelet-like morphology. Increasing the content of Fe caused intermetallic Al6(Fe,Mn) to become the primary phase at a lower Mn content.

A remarkable difference in CO2 hydrogenation to methanol on Pd nanoparticles supported inside and outside of carbon nanotubes.

An obvious difference was found in CO2 hydrogenation to methanol on Pd nanoparticles (NPs) supported inside and outside of carbon nanotubes (CNTs). The turnover frequency of methanol synthesis on the Pd NPs supported inside of CNTs was 3.7 times those supported outside of CNTs. It was found that the amount of Pd(δ+) species inside of CNTs was much higher than that outside of CNTs. We proposed that one of the major reasons for the difference in CO2 hydrogenation to methanol might be relative to the concentration of the Pd(δ+) species.

The Solidification Behavior of AA2618 Aluminum Alloy and the Influence of Cooling Rate.

In AA2618 aluminum alloy, the iron- and nickel-rich intermetallics formed during solidification are of great effect on the mechanical properties of the alloy at both room temperature and elevated temperatures. However, the solidification behavior of the alloy and the formation mechanism of the intermetallics during solidification of the alloy are not clear. This research fills the gap and contributes to understanding the intermetallic of the alloy. The results showed that cooling rate was of great influence on the formation of the intermetallics. Under the condition of slow cooling, the as-cast microstructures of the alloy were complex with many coarse eutectic compounds including Al9FeNi, Al7(CuNi)5, Si, Al2Cu and Al2CuMg. The phase Al9FeNi was the dominant intermetallic compound, which precipitated at the earlier stage of the solidification by eutectic reaction L → α-Al + Al9FeNi. Increasing the cooling rate would suppress the formation of the coarse eutectic intermetallics. Under the condition of near-rapid cooling, the as-cast microstructures of the alloy consisted of metastable intermetallics Al9FeNi and Al2Cu; the equilibrium eutectic compounds were suppressed. This research concluded that intermetallics could be refined to a great extent by near-rapid cooling.

A high-resolution LC-MS-based secondary metabolite fingerprint database of marine bacteria.

Marine bacteria are the most widely distributed organisms in the ocean environment and produce a wide variety of secondary metabolites. However, traditional screening for bioactive natural compounds is greatly hindered by the lack of a systematic way of cataloguing the chemical profiles of bacterial strains found in nature. Here we present a chemical fingerprint database of marine bacteria based on their secondary metabolite profiles, acquired by high-resolution LC-MS. Till now, 1,430 bacterial strains spanning 168 known species collected from different marine environments were cultured and profiled. Using this database, we demonstrated that secondary metabolite profile similarity is approximately, but not always, correlated with taxonomical similarity. We also validated the ability of this database to find species-specific metabolites, as well as to discover known bioactive compounds from previously unknown sources. An online interface to this database, as well as the accompanying software, is provided freely for the community to use.

[The analysis of hepatitis B virus genetic characterization and ratio of mutation in low-age group of HuNan].

OBJECTIVE: In order to investigate the characterization of mutation and genotype distributing in the younger group which was under the universal vaccination. The sequence of HBV was analyzed to offer the information to control and prevention in the area. METHODS: Young person's sera with positive HBsAg are collected, and the Large S sequence of HBV including preS and S gene are amplified and sequenced. The genotype and serotype were determined by clastwal with the standard genotype sequence. And one virus complete genome is amplified. RESULTS: The virus gene are successful amplified from the 33 sera. The sequence result indicate the 30 of 33 (90.9%) HBV genotype is B and 3 of 33 (9.0%) is C. The HBV serotype including ayw (1), adr (3), adw (29), 5 of 33 mutated in the "a" dominant of HBV, and the percentage is 15.2% . The HBV full length gene of serum number of 5856 is amplified and sequenced. Its genotype is B, serotype is adw and length is 3215 base. CONCLUSIONS: The dominant genotype of HuNan is B, and the dominant serotype is adw.

[Efficacy of recombinant hepatitis B vaccine and low-dose hepatitis B immune globulin in preventing mother-infant transmission of hepatitis B virus infection].

OBJECTIVE: To determine the efficacy of recombinant hepatitis B (rHB) vaccine and low-dose hepatitis B immune globulin (HBIG) in the prevention of mother-infant transmission of hepatitis B virus (HBV) infection. METHODS: rHB vaccine was administered to two groups of healthy neonates born to mothers with both hepatitis B surface antigen and e antigen positive in Guangxi, Hunan and Hebei province. Two hundred eighty-nine subjects were included in active immunization group, receiving triple doses of rHB vaccine given i.m. at 0, 1 and 6 month intervals; while 186 subjects receiving 50 IU HBIG at birth with triple doses of rHB vaccine in the low-dose HBIG group. RESULTS: Efficacy of active immunization alone was 87.8% (95% CI: 83.6 - 91.9). Efficacy of rHB vaccine and HBIG was 91.2% (95% CI: 86.7 - 95.6). No significant differences in efficacy by type of rHB vaccine (P = 0.707 2), immunoprophylaxis programs (P = 0.295 5) and regions of living (P = 0.998 7) were noticed. Seroprotection rates (anti-HBs >or= 10 mIU/ml) were detected in 91.1% and 93.5% in rHB vaccine alone recipients and rHB vaccine plus HBIG recipients, with geometric mean titer (GMT) of 153 mIU/ml and 164 mIU/ml at 1 year of age, respectively. Anti-rHBs decreased significantly with years after vaccination (chi(2) = 60.47, P = 0.000 1). Seroprotection rates of anti-rHBs antibodies decreased to 65.0% and 66.6% at 4 years of age in rHB vaccine alone recipients and rHB vaccine plus HBIG recipients, with GMT of 55 mIU/ml and 56 mIU/ml, respectively. CONCLUSION: These results suggested that the effectiveness of rHB vaccine plus low-dose HBIG was much better than only active plasma-derived vaccine; however, methods used for anti-rHBs assay need to be evaluated and verified.