RESUMEN
In this study, n-type Cu and Zn metal nanoparticle decorated Bi2(Te0.9Se0.1)3 ingots were prepared by a large-scale zone melting technique, with the concept of 'nanoparticle-in-alloy' to separately tune the electrical and thermal transport properties. Cu and Zn additions play multiple but different roles in the materials, whereas both of them form metal nanoinclusions embedded in van der Waals gaps or grain boundaries, exerting influences on thermoelectric properties. Cu addition, accommodated in the tetrahedral vacancies formed by four Te(1) atoms, effectively adjusts the electron concentration by donating its valence electron, and appreciably optimizes the power factor. Coupled with the significant frustration of heat-carrying phonons by Cu nanoinclusions, a highest ZT of 1.15 can be achieved for the 1 at.% Cu sample, which is an â¼20% improvement compared with that of commercial halogen-doped ingots. Zn addition, however, acting as weak donor, noticeably increases the density of state effective mass and Seebeck coefficient, and gives rise to a high ZT of 1.1. In particular, the kilogram-grade production technique coupled with the high ZT makes metal nanoparticle decorated n-type materials very promising for commercial applications.
RESUMEN
The effects of drying temperature and air velocity on the drying characteristics, color, bioactive compounds, rehydration ratio, and microstructure of Ophiopogonis Radix during hot air impingement drying (HAID) were explored in the current study. The experimental results showed that the drying temperature and air velocity had a significant impact on the drying characteristics and quality attributes of dried products except for the rehydration ratio. The drying time decreased from 720 to 240 min with the increase of drying temperature from 50 to 70 °C. Increasing the air velocity from 6 to 12 m/s enhanced the drying process of Ophiopogonis Radix, while the extension of air velocity to 15 m/s lowered the drying rate. The samples that were dried at a lower drying temperature obtained lower color difference. Properly increasing the drying temperature or air velocity could increase the total polysaccharide and flavonoid contents of dried products. Additionally, a back-propagation neural network (BPNN) model was developed to predict the moisture ratio of Ophiopogonis Radix during the drying process. The optimal BPNN with 3-11-1 topology were obtained to predict the moisture ratio of Ophiopogonis Radix during HAID and performed with an acceptable performance.
RESUMEN
Effects of vacuum freeze drying (VFD), air impingement drying (AID), hot air drying based on temperature and humidity control (TH-HAD), pulsed vacuum drying (PVD), and medium- and short-wave infrared radiation drying (MSIRD) on the drying characteristics and physicochemical properties of garlic slices were investigated in the current work. Based on the experimental results, the Weibull model fitted the experimental results better (R2 > 0.99) than the Wang and Singh model. Samples dried with PVD showed the smallest color difference (ΔE*), better rehydration capacity and desirable reducing sugar content. In response to thermal effects and pressure pulsations, the cell walls gradually degraded, and the cell and organelle membranes ruptured. The allicin and soluble pectin contents of garlic slices treated with PVD were higher by 8.0-252.3% and 49.5-92.2%, respectively, compared to those of the samples dried by other techniques. VFD maintained a complete garlic slice structure with the minimum shrinkage and the best appearance. The MSIRD process produced the densest structure, and caused an additional loss of color and phytochemical contents. The findings in current work implied that PVD could be a promising drying technique for garlic slices.
RESUMEN
The prognostic significance of perineural invasion in patients with gastric cancer (GC) is controversial. This study aimed to determine the prognostic value of perineural invasion in patients with stage II/III GC undergoing radical surgery. A total of 1913 patients with stage II/III GC who underwent curative resection between 1994 and 2015 were recruited. Clinicopathological factors, tumor recurrence patterns, disease-free survival, and cancer-specific survival were compared in terms of perineural invasion. The prognostic factors of disease-free survival and cancer-specific survival were determined using univariate and multivariate analyses. Perineural invasion was found in 57.1% of the patients. Age of <65 years, female sex, large tumor size, upper tumor location, total gastrectomy, advanced tumor invasion depth and nodal involvement, greater metastatic to examined lymph node ratio, undifferentiated tumor, and presence of lymphatic or vascular invasion were significantly associated with perineural invasion. The patients with perineural invasion had higher locoregional/peritoneal recurrence rates than those without. Perineural invasion was independently associated with disease-free survival and cancer-specific survival. In conclusion, perineural invasion positivity is associated with aggressive tumor behaviors and higher locoregional/peritoneal recurrence rates in patients with stage II/III GC undergoing curative surgery. It is an independent unfavorable prognostic factor of disease recurrence and cancer-specific survival.
RESUMEN
Herein, we report the synthesis of multiscale nanostructured p-type (Bi,Sb)(2)Te(3) bulk materials by melt-spinning single elements of Bi, Sb, and Te followed by a spark plasma sintering process. The samples that were most optimized with the resulting composition (Bi(0.48)Sb(1.52)Te(3)) and specific nanostructures showed an increase of approximately 50% or more in the figure of merit, ZT, over that of the commercial bulk material between 280 and 475 K, making it suitable for commercial applications related to both power generation and refrigeration. The results of high-resolution electron microscopy and small angle and inelastic neutron scattering along with corresponding thermoelectric property measurements corroborate that the 10-20 nm nanocrystalline domains with coherent boundaries are the key constituent that accounts for the resulting exceptionally low lattice thermal conductivity and significant improvement of ZT.
RESUMEN
Despite developments in surgery and chemotherapy, effective treatment of breast cancer is still an urgent problem owing to recurrence and metastasis. By combining the advantages of curcumin (Cur), zeolitic imidazolate framework-8 nanoparticles (ZIF-8), and hyaluronic acid (HA) in breast cancer therapy, Cur-loaded and HA-coated ZIF-8 (Cur@ZIF-8@HA) were synthesized using a method based on the pH-dependent solubility of Cur and the electrostatic interactions between zinc ions and carboxyl groups of HA. Cur@ZIF-8 were also prepared as a control group. Comprehensive comparisons of the physicochemical properties and anticancer activities of Cur@ZIF-8@HA and Cur@ZIF-8 were conducted. The results indicated that the degradation of Cur during the synthesis of Cur@ZIF-8 was negligible. The obtained Cur@ZIF-8 and Cur@ZIF-8@HA were truncated cubes with hydrodynamic diameters of 174 and 217 nm, respectively. Cur@ZIF-8@HA possessed better stability during storage in different media, a slower drug release rate under neutral and acidic conditions, and a greater inhibitory effect on breast cancer than Cur@ZIF-8. For 4T1 cells, treatment using Cur@ZIF-8@HA induced more cellular uptake and higher cytotoxicity, accompanied by higher lactate dehydrogenase release, cell cycle arrest in G2/M and S phases, production of reactive oxygen species, and apoptosis. In 4T1 tumor-bearing mice models, Cur@ZIF-8@HA showed a stronger inhibitory effect on tumor growth and pulmonary metastasis. Therefore, Cur@ZIF-8@HA might hold great potential as an agent for the effective therapy of breast cancer.
Asunto(s)
Antineoplásicos , Neoplasias de la Mama , Curcumina , Nanopartículas , Animales , Antineoplásicos/farmacología , Antineoplásicos/uso terapéutico , Neoplasias de la Mama/tratamiento farmacológico , Línea Celular Tumoral , Curcumina/farmacología , Curcumina/uso terapéutico , Portadores de Fármacos/uso terapéutico , Femenino , Humanos , Ácido Hialurónico , RatonesRESUMEN
Membrane exposure is a common complication after the guided bone regeneration (GBR) procedure and has a detrimental influence on the bone regeneration outcomes, while the commercially available GBR membranes show limited exposure tolerance. Recently, zinc (Zn) has been suggested as a promising material to be used as a barrier membrane in GBR therapy for bone augmentation. In this study, the degradation behavior in artificial saliva solution, cytotoxicity and antibacterial activity of pure Zn were investigated to explore its degradation and associated biocompatibility in the case of premature membrane exposure. The results indicated that the degradation rate of Zn in artificial saliva solution was about 31.42 µm year-1 after 28 days of immersion. The corrosion products on the Zn surface were mainly composed of Zn3(PO4)2, Ca3(PO4)2, CaHPO4, Zn5(CO3)2(OH)6 and ZnO. Besides, Zn presented an acceptable in vitro HGF cytocompatibility and a high antibacterial activity against Porphyromonas gingivalis. The preliminary results demonstrate that pure Zn exhibits appropriate degradation behavior, adequate cell compatibility and favorable antibacterial properties in the oral environment and is thus believed to sustain profitable function when membrane exposure occurs. The results provided new insights for understanding the exposure tolerance of Zn based membranes and are beneficial to their clinical applications.
Asunto(s)
Antibacterianos/farmacología , Materiales Biocompatibles/farmacología , Porphyromonas gingivalis/efectos de los fármacos , Zinc/farmacología , Antibacterianos/química , Materiales Biocompatibles/química , Regeneración Ósea/efectos de los fármacos , Línea Celular , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Técnicas Electroquímicas , Humanos , Pruebas de Sensibilidad Microbiana , Zinc/químicaRESUMEN
Photocatalytic transformation of biomass into value-added chemicals coupled with co-production of hydrogen provides an explicit route to trap sunlight into the chemical bonds. Here, we demonstrate a rational design of Zn1-xCdxS solid solution homojunction photocatalyst with a pseudo-periodic cubic zinc blende (ZB) and hexagonal wurtzite (WZ) structure for efficient glucose conversion to simultaneously produce hydrogen and lactic acid. The optimized Zn0.6Cd0.4S catalyst consists of a twinning superlattice, has a tuned bandgap, and displays excellent efficiency with respect to hydrogen generation (690 ± 27.6 µmol·h-1·gcat. -1), glucose conversion (~90%), and lactic acid selectivity (~87%) without any co-catalyst under visible light irradiation. The periodic WZ/ZB phase in twinning superlattice facilitates better charge separation, while superoxide radical (â O2 -) and photogenerated holes drive the glucose transformation and water oxidation reactions, respectively. This work demonstrates that rational photocatalyst design could realize an efficient and concomitant production of hydrogen and value-added chemicals from glucose photocatalysis.
RESUMEN
The applications of mixed ionic-electronic conductors are limited due to phase instability under a high direct current and large temperature difference. Here, it is shown that Cu2 Se is stabilized through regulating the behaviors of Cu+ ions and electrons in a Schottky heterojunction between the Cu2 Se host matrix and in-situ-formed BiCuSeO nanoparticles. The accumulation of Cu+ ions via an ionic capacitive effect at the Schottky junction under the direct current modifies the space-charge distribution in the electric double layer, which blocks the long-range migration of Cu+ and produces a drastic reduction of Cu+ ion migration by nearly two orders of magnitude. Moreover, this heterojunction impedes electrons transferring from BiCuSeO to Cu2 Se, obstructing the reduction reaction of Cu+ into Cu metal at the interface and hence stabilizes the ß-Cu2 Se phase. Furthermore, incorporation of BiCuSeO in Cu2 Se optimizes the carrier concentration and intensifies phonon scattering, contributing to the peak figure of merit ZT value of ≈2.7 at 973 K and high average ZT value of ≈1.5 between 400 and 973 K for the Cu2 Se/BiCuSeO composites. This discovery provides a new avenue for stabilizing mixed ionic-electronic conduction thermoelectrics, and gives fresh insights into controlling ion migration in these ionic-transport-dominated materials.
RESUMEN
Catalytic incineration is one of the cost-effective technologies to deal with odor cooking oil fumes (COFs). Hydrophobic carbon nanotubes (CNT) supported Pt catalysts were prepared by incipient wetness impregnation method. The 2.0â¯wt.%Pt/CNT catalyst gave the highest activity with the lowest light-off temperature near 200⯰C. The catalyst was further coated on the carbonized honeycomb which offered low-pressure drop and high surface area per unit volume. Toward feasibility application, hydrophobic honeycomb supported Pt/CNT catalyst achieved an excellent catalytic performance with the conversion of 88.0-91.3 % in gas hourly space velocity (GHSV) ranging from 5,700 to 17,200 h-1 at 300⯰C. Importantly, the honeycomb supported Pt/CNT catalyst could remove COFs substantially under simulated cooking conditions. Only a slight amount of heptane remained after catalytic incineration. In addition, the honeycomb support used much less Pt/CNT catalyst by maintaining the same performance, compared with powder catalyst. Our research outcome provides an excellent opportunity to apply the honeycomb supported Pt/CNT catalyst for moderate-temperature catalytic incineration of odor exhaust from kitchen hood.
RESUMEN
BiCuSeO oxyselenides are promising thermoelectric materials, yet further thermoelectric figure of merit ZT improvement is largely limited by the inferior electrical transport properties. The established literature on these materials shows only one power factor maximum upon carrier concentration optimization, which is typical for most thermoelectric semiconductors. Surprisingly, we found three power factor maxima when doping Bi with Pb. Based on our first-principles calculations, numerical modeling, and experimental investigation, we attribute the three maxima to the Fermi energy optimization, band convergence, and compositing effect due to in situ formed PbSe precipitates. Consequently, three ZT peaks of 0.9, 1.1, and 1.3 at 873 K are achieved for 4, 10, and 14 at.% Pb-doped samples, respectively, revealing the significance of complex electronic structure and multiple roles of Pb in BiCuSeO. The results establish an accurate band structure characterization for BiCuSeO and identify the role of band convergence and nanoprecipitation as the driving mechanism for high ZT.
RESUMEN
Low-cost, environment-friendly aqueous Zn batteries have great potential for large-scale energy storage, but the intercalation of zinc ions in the cathode materials is challenging and complex. Herein, the critical role of structural H2 O on Zn2+ intercalation into bilayer V2 O5 ·nH2 O is demonstrated. The results suggest that the H2 O-solvated Zn2+ possesses largely reduced effective charge and thus reduced electrostatic interactions with the V2 O5 framework, effectively promoting its diffusion. Benefited from the "lubricating" effect, the aqueous Zn battery shows a specific energy of ≈144 Wh kg-1 at 0.3 A g-1 . Meanwhile, it can maintain an energy density of 90 Wh kg-1 at a high power density of 6.4 kW kg-1 (based on the cathode and 200% Zn anode), making it a promising candidate for high-performance, low-cost, safe, and environment-friendly energy-storage devices.
RESUMEN
We have demonstrated an effective intercalation of multi-walled carbon nanotubes (MWCNTs) for the green and scalable synthesis of graphene nanoribbons (GNRs) using an intercalation-assisted longitudinal unzipping of MWCNTs. The key step is to introduce an intercalation treatment of raw MWCNTs with KNO3 and H2SO4, making it promising to decrease the strong van der Waals attractions in the MWCNTs bundles and between the coaxial graphene walls of CNTs. Systematic micro Raman, X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) characterizations suggest that potassium, nitrate, and sulfate ions play an important role in the CNT intertube and intratube intercalations during the pretreatment. Detailed scanning electron microscopy (SEM), transmission electron microscopy, XRD, and micro Raman characterizations indicate that the developed methodology possesses the ability to synthesis GNRs effectively with an improved CNT concentration in H2SO4 of 10 mg/ml at 70 °C, which is amenable to industrial-scale production because of the decreased amount of strong acid. Our work provides a scientific understanding how to enhance the GNR formation by accelerating the CNT longitudinal unzipping via suitable molecular intercalation.
RESUMEN
Rashba semiconductors are of great interest in spintronics, superconducting electronics and thermoelectrics. Bulk BiTeI is a new Rashba system with a giant spin-split band structure. 2D-like thermoelectric response has been found in BiTeI. However, as optimizing the carrier concentration, the bipolar effect occurs at elevated temperature and deteriorates the thermoelectric performance of BiTeI. In this paper, band gap engineering in Rashba semiconductor BiTeI through Br-substitution successfully reduces the bipolar effect and improves the thermoelectric properties. By utilizing the optical absorption and Burstein-Moss-effect analysis, we find that the band gap in Rashba semiconductor BiTeI increases upon bromine substitution, which is consistent with theoretical predictions. Bipolar transport is mitigated due to the larger band gap, as the thermally-activated minority carriers diminish. Consequently, the Seebeck coefficient keeps increasing with a corresponding rise in temperature, and thermoelectric performance can thus be enhanced with a ZT = 0.5 at 570 K for BiTeI0.88Br0.12.
RESUMEN
Intriguing experimental results raised the question about the fundamental mechanisms governing the electron-hole coupling induced bipolar thermal conduction in semiconductors. Our combined theoretical analysis and experimental measurements show that in semiconductors bipolar thermal transport is in general a "conductivity-limiting" phenomenon, and it is thus controlled by the carrier mobility ratio and by the minority carrier partial electrical conductivity for the intrinsic and extrinsic cases, respectively. Our numerical method quantifies the role of electronic band structure and carrier scattering mechanisms. We have successfully demonstrated bipolar thermal conductivity reduction in doped semiconductors via electronic band structure modulation and/or preferential minority carrier scatterings. We expect this study to be beneficial to the current interests in optimizing thermoelectric properties of narrow gap semiconductors.
RESUMEN
The low weighted carrier mobility has long been considered to be the key challenge for improvement of thermoelectric (TE) performance in BiTeI. The Rashba-effect-induced two-dimensional density of states in this bulk semiconductor is beneficial for thermopower enhancement, which makes it a prospective compound for TE applications. In this report, we show that intercalation of minor Cu-dopants can substantially alter the equilibria of defect reactions, selectively mediate the donor-acceptor compensation, and tune the defect concentration in the carrier conductive network. Consequently, the potential fluctuations responsible for electron scattering are reduced and the carrier mobility in BiTeI can be enhanced by a factor of two to three between 10 K and 300 K. The carrier concentration can also be optimized by tuning the Te/I composition ratio, leading to higher thermopower in this Rashba system. Cu-intercalation in BiTeI gives rise to higher power factor, slightly lower lattice thermal conductivity, and consequently improved figure of merit. Compared with pristine BiTe0.98I1.02, the TE performance in Cu0.05BiTeI reveals a 150% and 20% enhancement at 300 and 520 K, respectively. These results demonstrate that defect equilibria mediated by selective doping in complex TE and energy materials could be an effective approach to carrier mobility and performance optimization.