Modelling of the cathodic and anodic photocurrents from Rhodobacter sphaeroides reaction centres immobilized on titanium dioxide.

As one of a number of new technologies for the harnessing of solar energy, there is interest in the development of photoelectrochemical cells based on reaction centres (RCs) from photosynthetic organisms such as the bacterium Rhodobacter (Rba.) sphaeroides. The cell architecture explored in this report is similar to that of a dye-sensitized solar cell but with delivery of electrons to a mesoporous layer of TiO2 by natural pigment-protein complexes rather than an artificial dye. Rba. sphaeroides RCs were bound to the deposited TiO2 via an engineered extramembrane peptide tag. Using TMPD (N,N,N',N'-tetramethyl-p-phenylenediamine) as an electrolyte, these biohybrid photoactive electrodes produced an output that was the net product of cathodic and anodic photocurrents. To explain the observed photocurrents, a kinetic model is proposed that includes (1) an anodic current attributed to injection of electrons from the triplet state of the RC primary electron donor (PT) to the TiO2 conduction band, (2) a cathodic current attributed to reduction of the photooxidized RC primary electron donor (P+) by surface states of the TiO2 and (3) transient cathodic and anodic current spikes due to oxidation/reduction of TMPD/TMPD+ at the conductive glass (FTO) substrate. This model explains the origin of the photocurrent spikes that appear in this system after turning illumination on or off, the reason for the appearance of net positive or negative stable photocurrents depending on experimental conditions, and the overall efficiency of the constructed cell. The model may be a used as a guide for improvement of the photocurrent efficiency of the presented system as well as, after appropriate adjustments, other biohybrid photoelectrodes.

Green synthesis of rifampicin-loaded copper nanoparticles with enhanced antimicrobial activity.

The antimicrobial properties of copper and rifampicin-loaded copper nanoparticles were investigated using four strains: Staphylococcus aureus, Escherichia coli, Bacillus pumilis and Pseudomonas fluorescens. Spherical-shaped copper nanoparticles were synthesized via green reduction method from the peppermint extract. It was found that adsorption of rifampicin on the copper nanosurface enhances its biological activity and prevents the development of resistance. The interactions between rifampicin-copper nanoparticles and bacteria cells were monitored using atomic force microscopy (AFM) and confocal laser scanning microscopy (CLSM). It was proven that loaded with rifampicin copper nanoparticles were able to damage the S. aureus cell membrane and facilitate the bacteria biofilm matrix disintegration. Moreover, the DNA decomposition of S. aureus treated with copper and rifampicin-copper nanoparticles was confirmed by agarose gel electrophoresis. The results obtained indicate that adsorption of rifampicin on the copper nanoparticles surface might provide the reduction of antibiotic dosage and prevent its adverse side effects.

To attach or not to attach? The effect of carrier surface morphology and topography on attachment of phoretic deutonymphs of Uropoda orbicularis (Acari).

Previous studies on preferences of phoretic deutonymphs of Uropodina for attachment sites have shown that they frequently select smooth and hydrophobic surfaces. The aim of our study was to provide the detailed morphological and topographical characteristics of beetle body surfaces to which deutonymphs frequently attach and to verify how the presence of setae and surface sculpture affects deutonymph attachment. The study was conducted on Uropoda orbicularis (Müller, 1776) and its common beetle carriers: Aphodius prodromus (Brahm, 1790), Aphodius fimetarius (Linnaeus, 1758), Onthophagus nuchicornis (Linnaeus, 1758) and Margarinotus carbonarius (Hoffmann, 1803). Morphology and topography of elytra, femora, propygidia and pygidia of beetles were analysed mainly using SEM methods supported with CLSM and AFM techniques. The hypothesis that deutonymphs may attach to surfaces covered with setae, if seta density is low enough not to disturb mite movement, was tested. The study revealed that deutonymphs attach to surfaces of various types as follows: (i) smooth, (ii) hairy, i.e., covered with setae, (iii) flat and (iv) sculptured. Smooth body parts and body parts covered with setae of low density were most frequently and intensively occupied with deutonymphs. Surfaces of high seta density were avoided by mites. Within elytra of Aphodius beetles, deutonymphs definitely preferred flat surfaces of elytral intervals. On the contrary, densely punctuated propygidium and pygidium in M. carbonarius were heavily infested with deutonymphs. We conclude that carrier surface morphology and topography are important for Uropodina deutonymph attachment, but these two factors cannot fully explain the observed relation.

Electron-phonon coupling in copper intercalated Bi[Formula: see text]Se[Formula: see text].

We report charge and heat transport studies in copper-intercalated topological insulator Bi[Formula: see text]Se[Formula: see text] hybrid devices. Measured conductivity shows impact of quantum corrections, electron-electron and electron-phonon interactions. Our shot noise measurements reveal that heat flux displays a crossover between [Formula: see text] and [Formula: see text] with the increase of temperature. The results might be explained by a model of inelastic electron scattering on disorder, increasing the role of transverse acoustic phonons in the electron-phonon coupling process.

Effect of metal ions on levan synthesis efficiency and its parameters by levansucrase from Bacillus subtilis.

Levan is a fructan whose backbone is composed of ß-(2-6) linkages. It is synthetized by the enzyme levansucrase (EC 2.4.1.10). The effect of Fe3+, K+, Mg2+, Mn2+, and Zn2+ in the range of 0-1 mM on parameters of levan was tested using design of response surface experiment. The bimodal distribution of levan was observed, however, the concentration of high molecular mass fraction (weight average molar mass, Mw = 1.9 ·â€¯107 ±â€¯3.4 ·â€¯104 g/mol and intrinsic viscosity, [η] = 0.206 ±â€¯0.016 dL/g,) was not >4% of the total yield of levan. The metal ions in the reaction medium had an effect on parameters of low molecular mass levan and the efficiency of synthesis. Molar mass distribution of abundant, low molecular mass fraction was in the range of 4.33 ·â€¯104 g/mol to 9.77 ·â€¯104 g/mol; [η] was 0.040-0.075 dL/g while the efficiency of transfructosylation was within the range of 61.4to 69.1%. It was observed that the molar mass of levan depends on Fe3+ concentration while intrinsic viscosity is affected by the concentration of Mn2+ in the reaction medium. The GPC (with triple detection) data was analyzed using response surface methodology (RSM), k-means and principal component analysis (PCA).

The effect of substrate and surface plasmons on symmetry breaking at the substrate interface of the topological insulator Bi2Te3.

A pressing challenge in engineering devices with topological insulators (TIs) is that electron transport is dominated by the bulk conductance, and so dissipationless surface states account for only a small fraction of the conductance. Enhancing the surface-to-volume ratio is a common method to enhance the relative contribution of such states. In thin films with reduced thickness, the confinement results in symmetry-breaking and is critical for the experimental observation of topologically protected surface states. We employ micro-Raman and tip-enhanced Raman spectroscopy to examine three different mechanisms of symmetry breaking in Bi2Te3 TI thin films: surface plasmon generation, charge transfer, and application of a periodic strain potential. These mechanisms are facilitated by semiconducting and insulating substrates that modify the electronic and mechanical conditions at the sample surface and alter the long-range interactions between Bi2Te3 and the substrate. We confirm the symmetry breaking in Bi2Te3 via the emergence of the Raman-forbidden [Formula: see text] mode. Our results suggest that topological surface states can exist at the Bi2Te3/substrate interface, which is in a good agreement with previous theoretical results predicting the tunability of the vertical location of helical surface states in TI/substrate heterostructures.

Synthesis and characterization of magnetite/silver/antibiotic nanocomposites for targeted antimicrobial therapy.

The article is devoted to preparation and characterization of magnetite/silver/antibiotic nanocomposites for targeted antimicrobial therapy. Magnetite nanopowder was produced by thermochemical technique; silver was deposited on the magnetite nanoparticles in the form of silver clusters. Magnetite/silver nanocomposite was investigated by XRD, SEM, TEM, AFM, XPS, EDX techniques. Adsorptivity of magnetite/silver nanocomposite towards seven antibiotics from five different groups was investigated. It was shown that rifampicin, doxycycline, ceftriaxone, cefotaxime and doxycycline may be attached by physical adsorption to magnetite/silver nanocomposite. Electrostatic surfaces of antibiotics were modeled and possible mechanism of antibiotic attachment is considered in this article. Raman spectra of magnetite, magnetite/silver and magnetite/silver/antibiotic were collected. It was found that it is difficult to detect the bands related to antibiotics in the magnetite/silver/antibiotic nanocomposite spectra due to their overlap by the broad carbon bands of magnetite nanopowder. Magnetic measurements revealed that magnetic saturation of the magnetite/silver/antibiotic nanocomposites decreased on 6-19 % in comparison with initial magnetite nanopowder. Pilot study of antimicrobial properties of the magnetite/silver/antibiotic nanocomposites were performed towards Bacillus pumilus.