[Design and simulation study of positive pressure ventilation system in a simulated human biological lung].

Simulation of the human biological lung is a crucial method for medical professionals to learn and practice the use of new pulmonary interventional diagnostic and therapeutic devices. The study on ventilation effects of the simulation under positive pressure ventilation mode provide valuable guidance for clinical ventilation treatment. This study focused on establishing an electrical simulation ventilation model, which aims to address the complexities in parameter configuration and slow display of air pressure and airflow waveforms in simulating the human biological lung under positive pressure ventilation mode. A simulated ventilation experiment was conducted under pressure-regulated volume control (PRVC) positive pressure ventilation mode, and the resulting ventilation waveform was compared with that of normal adults. The experimental findings indicated that the average error of the main reference index moisture value was 9.8% under PRVC positive pressure ventilation mode, effectively simulating the ventilatory effect observed in normal adults. So the established electrical simulation ventilation model is feasible, and provides a foundation for further research on the simulation of human biological lung positive pressure ventilation experimental platform.

Recognition Method for Broiler Sound Signals Based on Multi-Domain Sound Features and Classification Model.

In view of the limited number of extracted sound features, the lack of in-depth analysis of applicable sound features, and the lack of in-depth study of the selection basis and optimization process of classification models in the existing broiler sound classification or recognition research, the author proposes a recognition method for broiler sound signals based on multi-domain sound features and classification models. The implementation process is divided into the training stage and the testing stage. In the training stage, the experimental area is built, and multiple segments of broiler sound signals are collected and filtered. Through sub-frame processing and endpoint detection, the combinations of start frames and end frames of multiple sound types in broiler sound signals are obtained. A total of sixty sound features from four aspects of time domain, frequency domain, Mel-Frequency Cepstral Coefficients (MFCC), and sparse representation are extracted from each frame signal to form multiple feature vectors. These feature vectors are labeled manually to build the data set. The min-max standardization method is used to process the data set, and the random forest is used to calculate the importance of sound features. Then, thirty sound features that contribute more to the classification effect of the classification model are retained. On this basis, the classification models based on seven classification algorithms are trained, the best-performing classification model based on k-Nearest Neighbor (kNN) is obtained, and its inherent parameters are optimized. Then, the optimal classification model is obtained. The test results show that the average classification accuracy achieved by the decision-tree-based classifier (abbreviated as DT classifier) on the data set before and after min-max standardization processing is improved by 0.6%, the average classification accuracy achieved by the DT classifier on the data set before and after feature selection is improved by 3.1%, the average classification accuracy achieved by the kNN-based classification model before and after parameter optimization is improved by 1.2%, and the highest classification accuracy is 94.16%. In the testing stage, for a segment of the broiler sound signal collected in the broiler captivity area, the combinations of the start frames and end frames of multiple sound types in the broiler sound signal are obtained through signal filtering, sub-frame processing, endpoint detection, and other steps. Thirty sound features are extracted from each frame signal to form the data set to be predicted. The optimal classification model is used to predict the labels of each piece of data in the data set to be predicted. By performing majority voting processing on the predicted labels of the data combination corresponding to each sound type, the common labels are obtained; that is, the predicted types are obtained. On this basis, the definition of recognition accuracy for broiler sound signals is proposed. The test results show that the classification accuracy achieved by the optimal classification model on the data set to be predicted is 93.57%, and the recognition accuracy achieved on the multiple segments of the broiler sound signals is 99.12%.

[A heart sound classification method based on complete ensemble empirical modal decomposition with adaptive noise permutation entropy and support vector machine].

Heart sound signal is a kind of physiological signal with nonlinear and nonstationary features. In order to improve the accuracy and efficiency of the phonocardiogram (PCG) classification, a new method was proposed by means of support vector machine (SVM) in which the complete ensemble empirical modal decomposition with adaptive noise (CEEMDAN) permutation entropy was as the eigenvector of heart sound signal. Firstly, the PCG was decomposed by CEEMDAN into a number of intrinsic mode functions (IMFs) from high to low frequency. Secondly, the IMFs were sifted according to the correlation coefficient, energy factor and signal-to-noise ratio. Then the instantaneous frequency was extracted by Hilbert transform, and its permutation entropy was constituted into eigenvector. Finally, the accuracy of the method was verified by using a hundred PCG samples selected from the 2016 PhysioNet/CinC Challenge. The results showed that the accuracy rate of the proposed method could reach up to 87%. In comparison with the traditional EMD and EEMD permutation entropy methods, the accuracy rate was increased by 18%-24%, which demonstrates the efficiency of the proposed method.

A novel vessel segmentation algorithm for pathological en-face images based on matched filter.

The vascular information in fundus images can provide important basis for detection and prediction of retina-related diseases. However, the presence of lesions such as Coroidal Neovascularization can seriously interfere with normal vascular areas in optical coherence tomography (OCT) fundus images. In this paper, a novel method is proposed for detecting blood vessels in pathological OCT fundus images. First of all, an automatic localization and filling method is used in preprocessing step to reduce pathological interference. Afterwards, in terms of vessel extraction, a pore ablation method based on capillary bundle model is applied. The ablation method processes the image after matched filter feature extraction, which can eliminate the interference caused by diseased blood vessels to a great extent. At the end of the proposed method, morphological operations are used to obtain the main vascular features. Experimental results on the dataset show that the proposed method achieves 0.88 ± 0.03, 0.79 ± 0.05, 0.66 ± 0.04, results in DICE, PRECISION and TPR, respectively. Effective extraction of vascular information from OCT fundus images is of great significance for the diagnosis and treatment of retinal related diseases.

Research on removal algorithm of EOG artifacts in single-channel EEG signals based on CEEMDAN-BD.

Single-channel electroencephalography (EEG) signals are more susceptible to electro-oculography (EOG) interference, which could be attributed to the acquisition device of the single-channel. To realize EOG artifacts separation in this paper, the blind deconvolution (BD) model was investigated based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN). The CEEMDAN method was firstly used to decompose the EEG data contained artifacts into several intrinsic mode functions (IMF). After that, the modal component used as the observed signal was provided to the BD model, which was formed by the source signal of the EEG signal and the EOG artifacts. Consequently, we successfully realized the separation of EEG signal and EOG artifacts by the constructing cost function iteratively, and our results demonstrated that the separation effect of this method on EOG artifacts is better than previous studies. Further, the correlation coefficient of real-life data after CEEMDAN-BD algorithm processing reaches 0.81. Moreover, the modal aliasing problem was solved with most of the original EEG signal components retained. In a word, this novel method provides theory and practice references for the processing of EEG signals and other physiological signals.