RESUMEN
To address the problem of the time-sharing recording of dual-wavelength low-coherence holograms while avoiding the use of customized achromatic optical elements, a snapshot dual-wavelength digital holography with LED and laser hybrid illumination is proposed. In this method, the parallel phase-shifting method is firstly employed to suppress zero-order and twin-image noise, and to record a LED hologram with low speckle noise and full field of view. Secondly, another laser hologram with a different center wavelength affected by speckle noise is recorded simultaneously using the spatial multiplexing technique. Finally, dual-wavelength wrapped phase images are reconstructed from a spatial multiplexing hologram, and then are combined to achieve low-noise phase unwrapping utilizing the iterative algorithm. Simulation and optical experiments on a reflective step with a depth of 1.38µm demonstrate that the proposed method can achieve single-shot and large-range height measurements while maintaining low-noise and full-field imaging.
RESUMEN
An iterative-based method for recovering the complex amplitude field behind scattering media is presented in this Letter. This method compensates the random phase modulation of scattering media by using multiple captured scattered light fields. Complex amplitude reconstruction with local iterative averaging of scattered light fields, and double weighted feedback is efficiently applied. Two feasible types of system setups, with varying detector positions and wavelength, are proposed. Simulations and proof-of-concept experiments are employed to demonstrate the effectiveness of the proposed method in reconstructing complex amplitude of a hidden target.
RESUMEN
With the development of computational imaging, the integration of optical system design and digital algorithms has made more imaging tasks easier to perform. Wavefront coding (WFC) is a typical computational imaging technique that is used to address the constraints of optical aperture and depth of field. In this paper, we demonstrated a low-cost and simple optical system based on WFC and deep learning. We constructed an optimized encoding method for the phase plate under the framework of deep learning, which reduces the requirement for aberration correction in the full field of view. Optical coding was achieved with just a double-bonded lens and a simple cubic phase mask, and digital decoding used the deep residual UNet++ network framework. The final image obtained has good resolution, whereas the depth of field of the system expanded by a factor of 13, which is of great significance for the high-precision inspection and attaching of small parts of machine vision.
RESUMEN
Speckle correlation imaging (SCI) has found tremendous versatility compared with other scattering imaging approaches due to its single-shot data acquisition strategy, relatively simple optical setup, and high-fidelity reconstruction performance. However, this simplicity requires SCI experiments to be performed strictly in a darkroom condition. As background noise increases, the speckle contrast rapidly decreases, making precise interpretation of the data extremely difficult. Here, we demonstrate a method by refining the speckle in the autocorrelation domain to achieve high-performance single-shot imaging. Experiment results prove that our method is adapted to estimate objects in a low signal-to-background ratio (SBR) circumstance even if the SBR is about -23dB. Laboratory and outdoor SCI experiments are performed.
RESUMEN
We present a short-coherence infrared digital holographic interferometry (IRDHI) to quantitatively measure the weak thermal effect in silicon wafer under visible laser pumping. In IRDHI, a superluminescent diode and a narrow-band filter are introduced to eliminate the self-interference fringes and suppress the noise. The effect of coherence length of the detection light source is analyzed and the optimal coherence length range in the proposed configuration is given. Meanwhile, we measure the weak thermal effect in silicon pumped by two different approaches of a continuous visible laser with different powers. The proposed configuration, which shows high stability and sensitivity, can be easily adapted and improved to measure the variation of thermal effect or refractive index in other near infrared transparent materials.
RESUMEN
We propose a method for measuring the full polarization states of a light field by using hybrid polarization-angular multiplexing digital holography based on geometric phase. Through acquiring the geometric phase distribution of the whole light field by only recording a composite hologram, and according to quantitative relationship between the geometric phase and polarization state, the Stokes parameters of a light field can be calculated. Compared with other methods, this method can be used to obtain the complex amplitude information of the light field simultaneously without requiring other complex devices or elements to be adjusted, thus enabling dynamic polarization state measurement. The measurement results of the light fields generated by standard polarized optical elements, vortex half-wave retarder, and liquid crystal depolarizer verified this method's feasibility and validity.
RESUMEN
The premixed ethylene and oxygen flame that is burning in a narrow channel is investigated with digital holographic interferometry (DHI). Combustion in either a narrow tube or channel is quite different. This is caused by the significant effects of the boundary layer. The flame's acceleration rate will be enhanced as the tube diameter decreases. Usually, flame and shock wave propagation, which occurs during the premixed ethylene/oxygen flame combustion in the measurement area, is less than few milliseconds, so that general camera can rarely capture this fast event. This paper demonstrates that, by introducing the high-speed camera to DHI, the propagation of weak compression wave, flame, and shock wave generated in the narrow channel is successfully measured with a temporal resolution of 10 µs. The ultrafast processes of the flame front changing, as well as the shock wave coupling and separating, are clearly shown from the reconstructed phase distributions of the recorded holograms; corresponding density variations are simultaneously calculated. The results could provide references for the micro-scale propulsion and power devices design and use, and this proposed configuration can also easily adapt to other kinds of ultrafast processes in fluids.
RESUMEN
We demonstrate a simple method for quantitative phase imaging of tiny transparent objects such as living cells based on the transport of intensity equation. The experiments are performed using an inverted bright field microscope upgraded with a flipping imaging module, which enables to simultaneously create two laterally separated images with unequal defocus distances. This add-on module does not include any lenses or gratings and is cost-effective and easy-to-alignment. The validity of this method is confirmed by the measurement of microlens array and human osteoblastic cells in culture, indicating its potential in the applications of dynamically measuring living cells and other transparent specimens in a quantitative, non-invasive and label-free manner.
Asunto(s)
Procesamiento de Imagen Asistido por Computador/métodos , Microscopía/métodos , Osteoblastos/fisiología , Algoritmos , Fenómenos Fisiológicos Celulares , HumanosRESUMEN
Surface plasmon holographic microscopy (SPHM), which combines surface plasmon microscopy with digital holographic microscopy, can be applied for amplitude- and phase-contrast surface plasmon resonance (SPR) imaging. In this paper, we propose an improved SPHM with the wavelength multiplexing technique based on two laser sources and a common-path hologram recording configuration. Through recording and reconstructing the SPR images at two wavelengths simultaneously employing the improved SPHM, tiny variation of dielectric refractive index in near field is quantitatively monitored with an extended measurement range while maintaining the high sensitivity. Moreover, imaging onion tissues is performed to demonstrate that the detection sensitivities of two wavelengths can compensate for each other in SPR imaging. The proposed wavelength-multiplexing SPHM presents simple structure, high temporal stability and inherent capability of phase curvature compensation, as well as shows great potentials for further applications in monitoring diverse dynamic processes related with refractive index variations and imaging biological tissues with low-contrast refractive index distributions in the near field.
RESUMEN
We propose a novel digital holographic microscopy (DHM) by integrating surface plasmon holographic microscopy (SPHM) with reflection DHM based on the angular and polarization multiplexing techniques. Taking advantages of the high sensitivity of surface plasmon resonance (SPR) and the high reflectivity of gold film, the tiny variations of specimen's refractive index (RI) can be measured by using SPHM, and meanwhile, the thickness changes of the specimen can be determined by means of reflection DHM. We experimentally monitor the volatilization process of an alcohol-water mixture droplet to verify the validity of the integrated DHM. The proposed microscopy is very promising in the objective-coupling SPR microscopy for multi-information measurements of diverse specimens with low-contrast RI distributions (biomolecules, nanofluids, etc.) in a dynamic and nondestructive way.
RESUMEN
We propose a compact and easy-to-align lateral shearing common-path digital holographic microscopy, which is based on a slightly trapezoid Sagnac interferometer to create two laterally sheared beams and form off-axis geometry. In this interferometer, the two beams pass through a set of identical optical elements in opposite directions and have nearly the same optical path difference. Without any vibration isolation, the temporal stability of the setup is found to be around 0.011 rad. Compared with highly simple lateral shearing interferometer, the off-axis angle of the setup can be easily adjusted and quantitatively controlled, meanwhile the image quality is not degraded. The experiments for measuring the static and dynamic specimens are performed to demonstrate the capability and applicability.
RESUMEN
Phase-shifting infrared digital holographic microscopy based on a homemade all-fiber variable phase shifter is presented to quantitatively obtain the phase distribution of an object wave carrying the information of a transparent specimen in the infrared band. The all-fiber variable phase shifter, which consists of a tubular piezoelectric transducer (PZT) and a single-mode fiber, can accurately produce any phase shift between 0 and 2π by modulating the driving voltage of the tubular PZT. Taking measurements of different staircase structures on a silicon wafer as samples, two configurations are presented based on different phase-shifting implementations: one is a slight off-axis two-step phase shift and the other is an in-line four-step phase shift. The reconstructed results prove the validity of this method.
RESUMEN
We develop a transmission and total internal reflection (TIR) integrated digital holographic microscopy (DHM) by introducing a home-made Dove prism with a polished short side. With the help of angular and polarization multiplexing techniques, the 2D refractive index distribution of a specimen adhered on the prism surface is determined using TIR-DHM. Meanwhile, the thickness profile is unambiguously calculated from the phase information using transmission DHM. This integrated microscopy is nondestructive and dynamic and can be used to simultaneously measure the index distribution and thickness profile of transparent or semi-transparent liquid or solid samples.
RESUMEN
A dual-wavelength common-path digital holographic microscopy based on a single parallel glass plate is presented to achieve quantitative phase imaging, which combines the dual-wavelength technique with lateral shearing interferometry. Two illumination laser beams with different wavelengths (λ1=532 nm and λ2=632.8 nm) are reflected by the front and back surfaces of the parallel glass plate to create the lateral shear and form the digital hologram, and then the hologram is reconstructed to obtain the phase distribution with a synthetic wavelength Λ=3339.8 nm. The experimental configuration is very compact, with the advantages of vibration resistance and measurement range extension. The experimental results of the laser-ablated pit, groove, and staircase specimens show the feasibility of the proposed configuration.
RESUMEN
We propose a method for simultaneously measuring dynamic changes of the refractive index distribution and surface topography, which integrates the transmission and reflection digital holographic microscopy based on polarization and angular multiplexing techniques. The complex amplitudes of the transmitted and reflected object waves can be simultaneously retrieved. The phase information of the reflected object wave is directly used to determine the topography of the specimen which corresponds to its physical thickness. Assuming that the refractive index distribution is uniform in the direction of the specimen thickness, the refractive index distribution can be deduced from the phase distributions of the transmitted and reflected object waves without any approximation. The refractive index distribution and dynamic changes of the topography of a tiny deionized water droplet have been measured for the availability of the proposed method.
RESUMEN
We present a method for dynamically measuring the refractive index distribution in a large range based on the combination of digital holographic interferometry and total internal reflection. A series of holograms, carrying the index information of mixed liquids adhered on a total reflection prism surface, are recorded with CCD during the diffusion process. Phase shift differences of the reflected light are reconstructed exploiting the principle of double-exposure holographic interferometry. According to the relationship between the reflection phase shift difference and the liquid index, two dimensional index distributions can be directly figured out, assuming that the index of air near the prism surface is constant. The proposed method can also be applied to measure the index of solid media and monitor the index variation during some chemical reaction processes.
RESUMEN
We present a kind of harmonic mode locking of bound-state solitons in a fiber laser based on molybdenum disulfide (MoS(2)) saturable absorber (SA). The mode locker is fabricated by depositing MoS(2) nanosheets on a D-shaped fiber (DF). In the fiber laser, two solitons form the bound-state pulses with a temporal separation of 3.4 ps, and the bound-state pulses are equally distributed at a repetition rate of 125 MHz, corresponding to 14th harmonics of fundamental cavity repetition rate (8.968 MHz). Single- and multiple-pulses emissions are also observed by changing the pump power and optimizing the DF based MoS(2) SA. Our experiment demonstrates an interesting operation regime of mode-locked fiber laser, and shows that DF based MoS(2) SA can work as a promising high-power mode locker in ultrafast lasers.