RESUMEN
Materials are more easily damaged during accidents that involve rapid deformation. Here, a design strategy is described for electronic materials comprised of conducting polymers that defies this orthodox property, making their extensibility and toughness dynamically adaptive to deformation rates. This counterintuitive property is achieved through a morphology of interconnected nanoscopic core-shell micelles, where the chemical interactions are stronger within the shells than the cores. As a result, the interlinked shells retain material integrity under strain, while the rate of dissociation of the cores controls the extent of micelle elongation, which is a process that adapts to deformation rates. A prototype based on polyaniline shows a 7.5-fold increase in ultimate elongation and a 163-fold increase in toughness when deformed at increasing rates from 2.5 to 10 000% min-1 . This concept can be generalized to other conducting polymers and highly conductive composites to create "self-protective" soft electronic materials with enhanced durability under dynamic movement or deformation.
RESUMEN
The conductivity and charge transport mobility of conjugated polymers (CPs) are largely correlated with their degree of crystallinity, rendering the crystallization of CPs an important endeavour. However, such tasks can be challenging, especially in the absence of sidechain functionalization. In this study, we demonstrate that the incorporation of a small amount of oligomers, specifically tetraaniline, can induce crystallization of the parent polymer, polyaniline, through a single-step self-assembly process. The resulting crystals are compositionally homogeneous because the oligomers and their parent polymer share the same repeating unit and are both electroactive. Mechanistic studies reveal that the tetraaniline forms a crystalline seed that subsequently guides the assembly of polyaniline due to their structural similarities. Applying this oligomer-assisted crystallization approach to polyaniline with defined molecular weights resulted in single crystalline nanowires for 5000 Da polyaniline, and nanowires with strong preferential chain orientation for those with molecular weights between 10 000 and 100 000 Da. Absorption studies reveal that the polymer chains are in an expanded conformation, which likely contributed to the high degree of packing order. Two-probe, single nanowire measurements show that the crystals have conductivity as high as 19.5 S cm-1. This method is simple, general, and can potentially be applied to other CPs.
RESUMEN
Stroke is a cerebrovascular disease that can lead to severe sequelae such as hemiplegia and mental retardation with a mortality rate of up to 40%. In this paper, we proposed an automatic segmentation network (CHSNet) to segment the lesions in cranial CT images based on the characteristics of acute cerebral hemorrhage images, such as high density, multi-scale, and variable location, and realized the three-dimensional (3D) visualization and localization of the cranial lesions after the segmentation was completed. To enhance the feature representation of high-density regions, and capture multi-scale and up-down information on the target location, we constructed a convolutional neural network with encoding-decoding backbone, Res-RCL module, Atrous Spatial Pyramid Pooling, and Attention Gate. We collected images of 203 patients with acute cerebral hemorrhage, constructed a dataset containing 5998 cranial CT slices, and conducted comparative and ablation experiments on the dataset to verify the effectiveness of our model. Our model achieved the best results on both test sets with different segmentation difficulties, test1: Dice = 0.918, IoU = 0.853, ASD = 0.476, RVE = 0.113; test2: Dice = 0.716, IoU = 0.604, ASD = 5.402, RVE = 1.079. Based on the segmentation results, we achieved 3D visualization and localization of hemorrhage in CT images of stroke patients. The study has important implications for clinical adjuvant diagnosis.
Asunto(s)
Hemorragia Cerebral , Accidente Cerebrovascular , Humanos , Hemorragia Cerebral/diagnóstico por imagen , Accidente Cerebrovascular/diagnóstico por imagen , Progresión de la Enfermedad , Redes Neurales de la Computación , Tomografía Computarizada por Rayos X , Procesamiento de Imagen Asistido por ComputadorRESUMEN
Vertically oriented nanostructures bring unparalleled high surface area, light trapping capability, and high device density to electronic, optoelectronic, and energy storage devices. However, general methods to prepare such structures remain sparse and are typically based on anodized metal oxide templates. Here, we demonstrate a new approach: using vertically oriented tetraaniline nanopillar arrays as templates for creating nanopillars and nanotubes of other materials. The tetraaniline templates are scalable and easy to prepare. Vertical arrays of a variety of materials can be created by directly coating them onto the tetraaniline nanopillars via vapor, solution, or electrodeposition. Since the tetraaniline template is encased within the target material, it does not require post-deposition removal, thus enabling vertical structure formation of sensitive materials. Conversely, removal of the encased tetraaniline template provides vertically oriented nanotube arrays in a lost-wax-type operation. The resulting vertical structures exhibit a high degree of orientation and height uniformity, with tunable feature size, spacing, and array density. Furthermore, the deposition location and shape of the vertical arrays can be patterned at a resolution of 3 µm. Collectively, these attributes should broaden the material repertoire for vertically oriented structures, and lead to advancements in energy storage, electronics, and optoelectronics.
RESUMEN
Conducting polymer hydrogels combine electrical conductivity and tunable water content, rendering them strong candidates for a range of applications including biosensors, cell culture platforms, and energy storage devices. However, these hydrogels are mechanically brittle and prone to damage, prohibiting their use in emerging applications involving dynamic movement and large mechanical deformation. Here, we demonstrate that applying the concept of architecture to conducting polymer hydrogels can circumvent these impediments. A stereolithography 3D printing method is developed to successfully fabricate such hydrogels in complex lattice structures. The resulting hydrogels exhibit elastic compressibility, high fracture strain, enhanced cycling stability, and damage-tolerant properties despite their chemical composition being identical to their brittle, solid counterparts. Furthermore, concentrating the deformation to the 3D geometry, rather than polymer microstructure, effectively decouples the mechanical and electrical properties of the hydrogel lattices from their intrinsic properties associated with their chemical composition. The confluence of these new physical properties for conducting polymer hydrogels opens broad opportunities for a myriad of dynamic applications.