RESUMEN
Hydroxyl radicals (â¢OH) generated in the photocatalytic process are crucial to the conversion of methane (CH4) to value-added methanol (CH3OH) at room temperature. However, utilizing noble metal-free catalysts and low-energy photons of solar light, such as visible and near-infrared light (vis-NIR), is difficult to provide more electron states to form â¢OH radicals. Here, we developed FeOOH/Li0.1WO3 core-shell nanorods via a two-step in/out co-modification of hexagonal tungsten oxide (h-WO3): (1) lithium ions intercalating into the hexagonal tunnels of h-WO3 to form Li0.1WO3 nanorods and (2) using FeOOH-wrapped Li0.1WO3 to obtain FeOOH/Li0.1WO3 core-shell nanorods. Introduction of lithium induces polaron transition in Li0.1WO3, enabling the absorption of vis-NIR light. Interestingly, FeOOH-based Fenton-like reaction when H2O2 is selected as an oxidant favors the generation of more â¢OH radicals available for CH4 oxidation to CH3OH. Meanwhile, FeOOH with FeIII as an "electron sink" highly improves the separation of photoinduced electrons and holes in Li0.1WO3. Eventually, efficient selective formation of CH4OH is achieved with remarkable generation rates up to â¼342 and â¼160 µmol g-1 at visible light (420-700 nm) and NIR light (≥800 nm), respectively. Our finding opens up new possibilities for developing noble metal-free catalysts for solar energy-driven CH4 conversion to CH3OH under ambient conditions.
Asunto(s)
Metanol , Nanotubos , Compuestos Férricos , Peróxido de Hidrógeno , Luz , Litio , MetanoRESUMEN
Uniform mesoporous anatase hollow spheres with high crystallinity have been fabricated by an efficient method, in which biocompatible ethanedioic acid acts as the chelating agent during the Ostwald ripening process. The combination of high crystallinity, large surface area, and mesoporosity leads to an excellent photocatalytic activity. In solar water splitting, the hollow spheres exhibit remarkably enhanced photocatalytic performance that is 1.4â times of P25.
RESUMEN
The in operando monitoring of catalytic intermediates is crucial for understanding the reaction mechanism and for optimizing the reaction conditions to improve the efficiency of the catalytic protocol; however, until now, this has remained a daunting challenge. Herein, we investigated the interaction of CO2 and H2 with the Cu(111) surface in a CO2 hydrogenation model system by using the in operando technique of near-ambient pressure X-ray photoelectron spectroscopy, which is further assisted by ultraviolet photoemission spectroscopy and low-energy electron diffraction (LEED) measurements. These techniques allowed the direct observation of CO2 dissociation into CO+O on the Cu(111) surface and the adsorption of O on the surface at room temperature. The intermediate HCOO- was unambiguously detected in the CO2 +H2 environment, which corroborated the formate pathway for methanol formation on the Cu(111) surface. We further found that O coverage can prevent the build up of graphitic carbon on the Cu surface. By taking advantage of the competitive interplay between Cu-O and graphitic carbon, we have proposed a feasible strategy for inhibition of the formation of graphitic carbon by tuning the CO2 and H2 partial pressures, which may contribute to sustaining the active Cu catalyst under the reaction conditions.
RESUMEN
The activation of C-H bonds in terminal alkynyl groups at room temperature was achieved in the reaction of 2,5-diethynyl-1,4-bis(4-bromophenylethynyl)benzene on Ag(111). Scanning tunneling microscopy studies showed the formation of organometallic species, whose stabilization was confirmed by density functional theory calculations, at room temperature as the product of C-H bond activation. The partial conversion of organometallic structures into covalent products of the homocoupling between the terminal alkynes was achieved by further annealing the sample at 420 K. Detached Br adatoms were suggested to play a key role in promoting the C-H bond activation. This proposal was supported by the theoretical study based on a simplified model of the system, showing the weakening of the C-H bond in the alkynyl group by an approaching Br atom. The results provide a new strategy for on-surface C-H bond activation under mild conditions, which register great potential applications in on-surface synthesis and bottom-up preparation of functional nanomaterials.
RESUMEN
The synthesis of free-standing two-dimensional titania (2-D TiO2) with a reduced band gap presents complex challenges to synthetic chemists. Here, we report a free-standing 2-D TiO2 sheet synthesized via a one-step solvothermal methodology, with a measured optical onset at â¼1.84 eV. Using first-principles calculations in combination with experiment, we propose that the as-formed 2-D TiO2 sheets are layers of the lepidocrocite TiO2 structure, but with large nonuniform strains consistent with its crumpled morphology. These strains cause a significant change in the quasiparticle band structure and optical absorption spectra, resulting in large absorption in the visible-light region. This narrow band gap 2-D TiO2 can catalyze the formation of singlet oxygen and the degradation of dye pollutants with low-energy photons of solar light. Our work demonstrates that lattice strains intrinsic to 2-D materials, especially its crumpled, free-standing forms, can result in new and useful properties.
RESUMEN
Understanding and manipulating the one half-reaction of photoinduced hole-oxidation to oxygen are of fundamental importance to design and develop an efficient water-splitting process. To date, extensive studies on oxygen evolution from water splitting have focused on visible-light harvesting. However, capturing low-energy photons for oxygen evolution, such as near-infrared (NIR) light, is challenging and not well-understood. This report presents new insights into photocatalytic water oxidation using visible and NIR light. WO2-WO3 hybrid nanorods were in situ fabricated using a wet-chemistry route. The presence of metallic WO2 strengthens light absorption and promotes the charge-carrier separation of WO3. The efficiency of the oxygen evolution reaction over noble-metal-free WO2-WO3 hybrids was found to be significantly promoted. More importantly, NIR light (≥700 nm) can be effectively trapped to cause the photocatalytic water oxidation reaction. The oxygen evolution rates are even up to around 220 (λ = 700 nm) and 200 (λ = 800 nm) mmol g-1 h-1. These results demonstrate that the WO2-WO3 material is highly active for water oxidation with low-energy photons and opens new opportunities for multichannel solar energy conversion.
RESUMEN
The concept of using single molecules as key building blocks for logic gates, diodes and transistors to perform basic functions of digital electronic devices at the molecular scale has been explored over the past decades. However, in addition to mimicking the basic functions of current silicon devices, molecules often possess unique properties that have no parallel in conventional materials and promise new hybrid devices with novel functions that cannot be achieved with equivalent solid-state devices. The most appealing example is the molecular switch. Over the past decade, molecular switches on surfaces have been intensely investigated. A variety of external stimuli such as light, electric field, temperature, tunneling electrons and even chemical stimulus have been used to activate these molecular switches between bistable or even multiple states by manipulating molecular conformations, dipole orientations, spin states, charge states and even chemical bond formation. The switching event can occur either on surfaces or in break junctions. The aim of this review is to highlight recent advances in molecular switches triggered by various external stimuli, as investigated by low-temperature scanning tunneling microscopy (LT-STM) and the break junction technique. We begin by presenting the molecular switches triggered by various external stimuli that do not provide single molecule selectivity, referred to as non-selective switching. Special focus is then given to selective single molecule switching realized using the LT-STM tip on surfaces. Single molecule switches operated by different mechanisms are reviewed and discussed. Finally, molecular switches embedded in self-assembled monolayers (SAMs) and single molecule junctions are addressed.
RESUMEN
An atomic-scale understanding of gas adsorption mechanisms on metal-porphyrins or metal-phthalocyanines is essential for their practical application in biological processes, gas sensing, and catalysis. Intensive research efforts have been devoted to the study of coordinative bonding with relatively active small molecules such as CO, NO, NH3, O2, and H2. However, the binding of single nitrogen atoms has never been addressed, which is both of fundamental interest and indeed essential for revealing the elementary chemical binding mechanism in nitrogen reduction processes. Here, we present a simple model system to investigate, at the single-molecule level, the binding of activated nitrogen species on the single Mn atom contained within the manganese phthalocyanine (MnPc) molecule supported on an inert graphite surface. Through the combination of in situ low-temperature scanning tunneling microscopy, scanning tunneling spectroscopy, ultraviolet photoelectron spectroscopy, X-ray photoelectron spectroscopy, and density functional theory calculations, the active site and the binding configuration between the activated nitrogen species (neutral nitrogen atom) and the Mn center of MnPc are investigated at the atomic scale.
RESUMEN
The reversible selective hydrogenation and dehydrogenation of individual manganese phthalocyanine (MnPc) molecules has been investigated using photoelectron spectroscopy (PES), low-temperature scanning tunneling microscopy (LT-STM), synchrotron-based near edge X-ray absorption fine structure (NEXAFS) measurements, and supported by density functional theory (DFT) calculations. It is shown conclusively that interfacial and intramolecular charge transfer arises during the hydrogenation process. The electronic energetics upon hydrogenation is identified, enabling a greater understanding of interfacial and intramolecular charge transportation in the field of single-molecule electronics.
RESUMEN
To fully achieve potential applications of the double-decker molecules containing rare earth elements as single-molecule magnets in molecular spintronics, it is crucial to understand the 4f states of the rare earth atoms sandwiched in the double-decker molecules by metal electrodes. In this study, low-temperature scanning tunneling microscopy and spectroscopy were employed to investigate the isolated double-decker DyPc2 molecule adsorbed on Au(111) via its differential conductance measurements. The experimental results revealed that the differential conductance maps acquired at a constant height mode simply depicted the authentic molecular orbitals; moreover, the differential conductance maps achieved at a constant current mode could not directly probe the 4f states of the sandwiched Dy atom. This was consistent with the spectra obtained over the molecule center around the Fermi level, indicative of no Kondo feature. Upon decreasing the tip-molecule distance, the CH-mode images presented high-resolution structure but no information of the 4f states. All results indicated that the Dy atom barely contributed to the tunneling current because of the absence of coupling with the microscope tip, echoing the inaccessibility of the Dy 4f states in the double-decker DyPc2 molecule.
RESUMEN
Self-assembled two-dimensional molecular arrays and photoinduced polymerization of 4-bromo-4'-hydroxybiphenyl on Ag(111) were studied using low-temperature scanning tunneling microscopy combined with density functional theory calculations. Square-like self-assembled structures of 4-bromo-4'-hydroxybiphenyl stabilized by intermolecular hydrogen and halogen bonds were transformed into hexagonal nanopores of biphenyl biradicals by 266 nm UV laser irradiation at 80 K. The biradicals further coupled to each other and formed covalently linked polyphenylene polymer chains at room temperature.
RESUMEN
The electrochemical performance of pristine metal-organic xerogels as anodes in lithium-ion batteries is reported for the first time. We propose a novel synthesis approach for the in situ generation of highly dispersed, ultrafine cobalt sulfide nanoparticles on humic acid gels (CoSHA). The CoS nanoparticles in CoSHA have an average diameter of approximately 3 nm. CoSHA electrodes demonstrate enhanced lithium storage capacity, delivering a capacity of 662 mAh g-1 at 0.1 A g-1. They also show stable long-term cycling performance, with no capacity decay after 900 cycles at 1.0 A g-1. Furthermore, our experiments indicate that the improved lithium-ion adsorption results from the oxygen-containing functional groups in humic acid and the ultrafine CoS active sites. This study offers a practical methodology for synthesizing ultrafine metal sulfides and new insights into using pristine gel-based electrodes for energy storage and conversion.
RESUMEN
The manipulation of conductive nanowires (NWs) on semiconductor platforms provides important insights into the fabrication of nanoscale electronic devices. In this work, we directly observed the electric field-induced phase transitions in atomic Au-NWs self-assembled on Ge(001) surfaces using scanning tunneling microscopy (STM). The tunneling electrons and electric fields underneath a STM tip apex can effectively trigger a phase transition in Au-NWs on Ge(001) surfaces. Such phase transitions are associated with a remarkable atomic rearrangement in the Au-NWs, thereby modifying their band structures. Moreover, directly monitoring the dynamic reconstruction of Au-NWs on Ge(001) surfaces helps us to understand the NWs' intricate atomic configurations and their electronic properties. The spatially controlled phase transition at the nanometer scale using STM shows the possibility of modulating NWs' properties at an atomic scale.
RESUMEN
The optoelectronic properties of two-dimensional (2D) transition metal dichalcogenide (TMDC) monolayers such as WS2 are largely dominated by excitons due to strong Coulomb interactions in these 2D confined monolayers, which lead to formation of Rydberg-like excitonic states below the free quasiparticle band gap. The precise knowledge of high order Rydberg excitonic states is of great importance for both fundamental understanding such as many-electron effects and device applications such as optical switching and quantum process information. Bright excitonic states could be probed by linear optical spectroscopy, while probing dark excitonic states generally requires nonlinear optical (NLO) spectroscopy. Conventional optical methods for probing high-order Rydberg excitonic states were generally performed at cryogenic temperatures to ensure enough signal-to-noise ratio (SNR) and narrow line width. Here we have designed a hybrid nanostructure of monolayer WS2 integrated with a plasmonic cavity and investigated their NLO properties at the single particle level. Giant enhancement in NLO responses, stronger excitonic resonance effects, and narrowed line widths of NLO excitation spectra were observed when monolayer WS2 was placed in our carefully designed plasmonic cavity. Optimum enhancement of 1000-, 3000-, and 3800-fold were achieved for two-photon photoluminescence (2PPL), second harmonic generation (SHG), and third-harmonic generation (THG), respectively, in the optimized cavity structure. The line width of SHG excitation spectra was reduced from 43 down to 15 meV. Plasmon enhanced NLO responses brought improved SNR and spectral resolution, which allowed us to distinguish discrete excitonic states with small energy differences at room temperature. By using three complementary NLO techniques in combination with linear optical spectroscopy, energies of Rydberg excitonic states of A (1s, 2s, 2p, 3s, 3p, 4s), B (1s), and C and D excitons of monolayer WS2 have been accurately determined, which allow us to determine exciton binding energy and quasiparticle bandgap. It was interesting to find that the 2p lies 30 meV below 2s, which lends strong support to the theoretical prediction of nonlocal dielectric screening effects based on a non-hydrogenic model. Our results show that plasmon enhanced NLO spectroscopy could serve as a general method for probing high order Rydberg excitonic states of 2D materials.
RESUMEN
Double perovskites with bright emission, low toxicity, and excellent stability have drawn considerable attention. Herein, we report the hydrothermal synthesis of Mn2+-doped Cs2Na1-xAgxBiCl6 double perovskites that exhibit dual emission modes. Introducing Ag+ ions to Cs2NaBiCl6 samples enables a bright self-trapped exciton (STE) emission in orange-red color, whereas Mn2+ dopants induce a yellow-orange emission. Importantly, Mn2+ doping into Cs2Na1-xAgxBiCl6 double perovskites with an indirect bandgap enables a high photoluminescence quantum yield of 49.52 ± 2%. Density functional theory calculations reveal that bringing Ag+ ions into Cs2NaBiCl6 can localize wave function to the [AgCl6]5- octahedron and convert dark transitions to bright STE transitions. Moreover, the 3d orbitals of Mn2+ dopants hybridize with Bi-6p and Cl-3p orbitals at the conduction band minimum, resulting in direct electron transfer from the host to Mn2+ and a significant increase in photoluminescence efficiency. These results shed light on the optical physical process of Mn2+-doped systems, providing useful information for further improvement of the photoluminescence efficiency of double perovskites.
Asunto(s)
Compuestos de Calcio , Electrones , Óxidos , Sulfuros , TitanioRESUMEN
It is a long-standing goal to fabricate conductive molecular nanowires (NWs) on semiconductor surfaces. Anchoring molecules to pre-patterned surface nanostructures is a practical approach to construct molecular NWs on semiconductor surfaces. Previously, well-ordered inorganic Ge NWs were deduced to spontaneously grow onto Pt/Ge(001) surfaces after annealing at an elevated temperature. In this work, we further demonstrate that organic 7,7,8,8-tetracyanoquinodimethane (TCNQ) molecular NWs can self-assemble onto the atomic NWs on Pt/Ge(001) surfaces. The outer nitrogen atoms in TCNQ molecules hybridize with under-coordinated Ge atoms in Ge NWs with an energy release of â¼1.14 eV per molecule, and electrons transfer from Ge NWs to the frontier orbitals of anchored TCNQs resulting in a negatively charged state. This largely tailors the electronic configurations of TCNQs and Pt/Ge(001) surfaces, enhancing the electron transport along the dimer row direction. The TCNQ molecular NWs coupled with the Ge NWs represent an exemplary showcase for the fabrication of molecular NWs on semiconductor surfaces.
RESUMEN
We have prepared photosensitizer-doped conjugated polymer nanoparticles by using a reprecipitation method. The conjugated polymer, poly[9,9-dibromohexylfluorene-2,7-ylenethylene-alt-1,4-(2,5-dimethoxy)phenylene] (PFEMO), was used as the host matrix to disperse tetraphenylporphyrin (TPP). These TPP-doped PFEMO nanoparticles are stable and have a uniform size of â¼50 nm. Efficient intraparticle energy transfer from PFEMO to TPP has been observed. The TPP emission of the nanoparticles was found to be enhanced by 21-fold by PFEMO under two-photon excitation. Enhanced two-photon excitation singlet oxygen generation efficiency in the TPP-doped PFEMO nanoparticles has been demonstrated. Our results suggest that these photosensitizer-doped conjugated polymer nanoparticles can act as novel photosensitizing agents for two-photon photodynamic therapy and related applications.
Asunto(s)
Alquinos/química , Fluorenos/química , Nanopartículas/química , Fotones , Fármacos Fotosensibilizantes/química , Polímeros/química , Oxígeno Singlete/química , Absorción , Transferencia de Energía , Fotoquimioterapia , Porfirinas/química , Agua/químicaRESUMEN
Large-scale tetracene-doped anthracene nanowire arrays were prepared, and the doping effects were studied. The high doping concentration up to 10% (molar ratio) has been achieved, attributed to both the unique long-nanowire geometry and the excellent structural compatibility of anthracene and tetracene. The incorporation of long tetracene molecules into the matrix of short anthracene molecules induced an enlarged interlayer thickness, a decreased nanowire thickness, and an expanded nanowire width. The tetracene molecules were homogeneously embedded into the anthracene matrix at low doping concentrations (<1%). The doping became inhomogeneous at high doping concentrations (≥1%). The energy transfer efficiency between anthracene and tetracene is nearly 100% at doping concentrations ≥1%.
RESUMEN
Three-dimensional (3D) TiO2 architectures have attracted significant attention recently as they can improve the electrochemical stability and realize the full potential of TiO2-based anodes in lithium ion batteries. Here, flower-like rutile TiO2 spheres with radially assembled nanorods (c-channels) were fabricated via a simple hydrothermal method. The 3D radial architecture affords massive active sites to fortify the lithium storage. Moreover, the presence of c-channels facilitates electrolyte infiltration and offers facile pathways for efficient Li+ transport. As a result, this flower-like rutile TiO2 anode gives significantly enhanced specific capacities (615 mA h g-1 at 1 C and 386 mA h g-1 at 2 C after 400 cycles) and a superior long-term cyclability (up to 10 000 cycles with a specific capacity of 67 mA h g-1 at 100 C). Kinetic analysis reveals that the enhanced diffusion-controlled and surface capacitive storage leads to the excellent electrochemical behavior. This work not only exhibits the enormous advantages of 3D architectures with c-channels, but also provides access to structural design and crystal phase selection for TiO2-based anode materials.
RESUMEN
Novel multifunctional nanoparticles that combine two functionalities (a gold nanorod core and a porphyrin-doped mesoporous silica shell) into one entity were synthesized. Due to the encapsulation of mesoporous silica, the porphyrin can be well protected against the external bioenvironment. In addition, the generated singlet oxygen by porphyrin molecules can be easily released from the silica. We have demonstrated that these multifunctional nanoparticles can generate singlet oxygen with relatively higher yield compared to free porphyrin. These multifunctional nanocomposites are attractive candidates for simultaneous photosensitization and two-photon imaging as well as imaging guided therapy.