Calix[3]arene-Analogous Metacyclophanes: Synthesis, Structures and Properties with Infinite Potential.

Calixarene-analogous metacyclophanes (CAMs) are a special class of cyclophanes that are cyclic polyaromatic hydrocarbons containing three or more aromatic rings linked by one or more methylene bridging groups. They can be considered to be analogues of calixarenes, since, in both types of molecules, the component aromatic rings are linked by methylene groups, which are meta to each other. Since the prototype or classical calix[4]arene consists of four benzene rings each linked by methylene bridges, which are also meta to each other, it can be considered to be an example of a functionalized [1.1.1.1]metacyclophane. A metacyclophane (MCP) that consists of three individual hydroxyl-group functionalized aromatic rings linked by methylene groups, e.g., a trihydroxy[1.1.1]MCP may therefore, by analogy, be termed in the broadest sense as a "calix[3]arene" or a "calix[3]arene-analogous metacyclophane". Most of the CAMs reported have been synthesized by fragment coupling approaches. The design, synthesis and development of functionalized CAMs, MCPs, calixarenes and calixarene analogues has been an area of great activity in the past few decades, due their potential applications as molecular receptors, sensors and ligands for metal binding, and for theoretical studies, etc. In this review article, we focus mainly on the synthesis, structure and conformational properties of [1.1.1]CAMs, i.e., "calix[3]arenes" and their analogues, which contain three functionalized aromatic rings and which provide new scaffolds for further explorations in supramolecular and sensor chemistry.

A Hexahomotrioxacalix[3]arene-Based Ditopic Receptor for Alkylammonium Ions Controlled by Ag⁺ Ions.

A receptor cone-1 based on a hexahomotrioxacalix[3]arene bearing three pyridyl groups was successfully synthesized, which has a C3-symmetric conformation and is capable of binding alkylammonium and metal ions simultaneously in a cooperative fashion. It can bind alkylammonium ions through the -cavity formed by three aryl rings. This behaviour is consistent with the cone-in/cone-out conformational rearrangement needed to reorganize the cavity for endo-complexation. As a C3-symmetrical pyridyl-substituted calixarene, receptor cone-1 can also bind an Ag⁺ ion, and the nitrogen atoms are turned towards the inside of the cavity and interact with Ag⁺. After complexation of tris(2-pyridylamide) derivative receptor cone-1 with Ag⁺, the original C3-symmetry was retained and higher complexation selectivity for n-BuNH3⁺ versus t-BuNH3⁺ was observed. Thus, it is believed that this receptor will have a role to play in the sensing, detection, and recognition of Ag⁺ and n-BuNH3+ ions.

Pyrene-Based Approach to Tune Emission Color from Blue to Yellow.

The development of functionalized, luminescent, pyrene-based monomers has been and continues to be an area of great interest in terms of the design and fabrication of optical and electronic devices. Herein, a facile strategy to tune the emission color of pyrene-based chromophores has been established by simple functional group modification at the para position to the diphenylamino on the donor building block. Intriguing photophysical properties were obtained and are described both in different solutions and in the solid state. The results obtained could be explained by the Hammett method and by density functional theory (DFT) calculations. A good correlation was observed between the Hammett σpara constants of the functional groups para to the phenyl and the wavenumber (cm-1) of the emission profile. This positive correlation, namely between the σ constants of the functional groups and the emission properties of the monomers, can be used to develop a predictive method for these types of systems.

Synthesis and conformations of [2.n]metacyclophan-1-ene epoxides and their conversion to [n.1]metacyclophanes.

A series of syn- and anti-[2.n]metacyclophan-1-enes have been prepared in good yields by McMurry cyclizations of 1,n-bis(5-tert-butyl-3-formyl-2-methoxyphenyl)alkanes. Significantly, acid catalyzed rearrangements of [2.n]metacyclophan-1-enes afforded [n.1]metacyclophanes in good yield. The ratios of the products are strongly regulated by the number of methylene bridges present. The percentages of the rearrangement products increase with increasing length of the carbon bridges. Characterization and the conformational studies of these products are described. Single crystal X-ray analysis revealed the adoption of syn- and anti-conformations. DFT calculations were carried out to estimate the energy-minimized structures of the synthesized metacyclophanes.

Functionalization of Pyrene To Prepare Luminescent Materials-Typical Examples of Synthetic Methodology.

Pyrene-based π-conjugated materials are considered to be an ideal organic electro-luminescence material for application in semiconductor devices, such as organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaics (OPVs), and so forth. However, the great drawback of employing pyrene as an organic luminescence material is the formation of excimer emission, which quenches the efficiency at high concentration or in the solid-state. Thus, in order to obtain highly efficient optical devices, scientists have devoted much effort to tuning the structure of pyrene derivatives in order to realize exploitable properties by employing two strategies, 1) introducing a variety of moieties at the pyrene core, and 2) exploring effective and convenient synthetic strategies to functionalize the pyrene core. Over the past decades, our group has mainly focused on synthetic methodologies for functionalization of the pyrene core; we have found that formylation/acetylation or bromination of pyrene can selectly lead to functionalization at K-region by Lewis acid catalysis. Herein, this Minireview highlights the direct synthetic approaches (such as formylation, bromination, oxidation, and de-tert-butylation reactions, etc.) to functionalize the pyrene in order to advance research on luminescent materials for organic electronic applications. Further, this article demonstrates that the future direction of pyrene chemistry is asymmetric functionalization of pyrene for organic semiconductor applications and highlights some of the classical asymmetric pyrenes, as well as the latest breakthroughs. In addition, the photophysical properties of pyrene-based molecules are briefly reviewed. To give a current overview of the development of pyrene chemistry, the review selectively covers some of the latest reports and concepts from the period covering late 2011 to the present day.

An Unprecedented Photochemical Reaction for Anthracene-Containing Derivatives.

A series of anthracene-containing derivatives have been synthesised and characterised. The photochemical behaviour of these derivatives have been investigated by 1 H NMR spectroscopy. An unprecedented photolysis reaction for anthracene-containing derivatives was observed in the case of anthracenes directly armed with a -CH2 O-R group upon UV irradiation. The photolysis reaction process has been demonstrated to occur in three steps. Firstly, the anthracene-containing derivatives are converted into the corresponding endoperoxide intermediate upon UV irradiation in the presence of air; then, the endoperoxide intermediate is decomposed to the corresponding starting compound and 9-anthraldehyde; finally, 9-anthraldehyde is further oxidised to anthraquinone. Additionally, the photolysis reaction of anthracene-containing derivatives is significantly promoted in the presence of a thiacalix[4]arene platform.

Regioselective Substitution at the 1,3- and 6,8-Positions of Pyrene for the Construction of Small Dipolar Molecules.

This article presents a novel asymmetrical functionalization strategy for the construction of dipolar molecules via efficient regioselective functionalization along the Z-axis of pyrene at both the 1,3- and 6,8-positions. Three asymmetrically substituted 1,3-diphenyl-6,8-R-disubsituted pyrenes were fully characterized by X-ray crystallography, photophysical properties, electrochemistry, and density functional theory calculations.

Synthesis and conformational studies of chiral macrocyclic [1.1.1]metacyclophanes containing benzofuran rings.

Macrocyclic [1.1.1]metacyclophanes (MCPs) containing benzene and benzofuran rings linked by methylene bridges and which can be viewed as calixarene analogues, have been synthesized by demethylation of [3.3.1]MCP-diones with trimethylsilyl iodide (TMSI) in MeCN. The [3.3.1]MCP-diones are synthesized by using (p-tolylsulfonyl)methyl isocyanide (TosMIC) as the cyclization reagent in N,N-dimethylformamide (DMF) with an excess of sodium hydride. (1)H NMR spectroscopy revealed that the remaining hydroxyl group on the phenyl ring is involved in intramolecular hydrogen bonding with the oxygen of one of the benzofuran rings. O-Methylation at the lower rim of monohydroxy[1.1.1]MCP in the presence of K2CO3 in acetone afforded a novel and inherently chiral calixarene analogue, namely the macrocyclic [1.1.1]MCP, possessing C1 symmetry. The inherent chirality of the two conformers was characterized by (1)H NMR spectroscopy by addition of an excess of Pirkle's chiral shift reagent, which caused a splitting of the corresponding methylene protons to AB patterns. Single crystal X-ray analysis revealed the adoptation of a hemisphere-shaped cone isomer. DFT calculations were carried out to investigate the energy-minimized structures and the hydrogen bonds of the synthesized MCPs.

The first study about the relationship between the extractability of thiacalix[4]arene derivatives and the position of the coordination binding sites.

Three organic ionophores (2-4) based on the p-tert-butylthiacalix[4]arene backbone, blocked in the 1,3-alternate conformation, bearing two pyridyl coordinating moieties (ortho for 2, meta for 3 and para for 4), have been synthesized and characterized in the solid state. The solvent extraction experiments with the metal ions showed that the ability of these derivatives to complex with Ag(+) appeared to be largely dependent on the position of the nitrogen atoms of the pyridyl ring. Two different complexation modes have been confirmed by 1H NMR titration. Ionophore 2 armed with two pyridyl moieties, complexed with Ag(+) cation through N···Ag(+)···S interactions; however, ionophore 3 and ionophore 4 complexed with Ag(+) through metal-nitrogen (N···Ag(+)) interactions. The DFT computational studies were consistent with the experimental findings. These findings will provide us with an important rule to design an appropriate thiacalix[4]arene ionophore in the future. Another study on the possibility for application of ionophores 2-4 for the treatment of waste water containing Cr(VI) and Cr(III), showed that ionophore 3 was useful in the application of the solvent extraction method in selective treatment of waste water containing Cr(VI) and Cr(III) prior to discharge.

[The Thiacalix [4] arene-Coumarin Fluorescence Probe Recognition for Fe³âº and Bovine Hemoglobin].

1,3-alternate coumarin substituted thiacalix[4]arene fluorescent probe 1 was synthesised from 1,3-alternate diethyl thiacalix[4]arene and 7-hydroxycoumarin by-step reactions. In DMSO/H2O (φ, 3/7, pH 7) solution, the strong fluorescence emission and UV absorption of probe 1 can be selectively quenched or significantly enhanced by Fe³âº ion. The probe 1 showed high Fe³âº selective fluorescence quenching or absorption enhancement over commonly coexistent metal ions in neutral aqueous media, and the limit of detections were obtained as low as 10⁻8 mol · L⁻¹ of Fe³âº by fluorescence and absorption spectrometry. Spectral titration, isothermal titration calorimetry and mass spectrometry were showed that probe and Fe³âº form 1:1 complexes, the constant up to 105 L · mol⁻¹ and coordinate process was spontaneous by the mole binding free energy and entropy of probe with Fe³âº. In addition, the probe can identification bovine hemoglobin (BHb) over other proteins through quenched its fluorescence in DMSO/H2O (φ, 1/9, Tris-HCl, pH 7, 0.1 mol · L⁻¹ NaCl) media. The limit of detection was obtained as 0. 12 µg · mL⁻¹ of BHb, as well as a linearity of 0.2-3.0 µg · mL⁻¹, indicating the probe of high sensitivity and quantitation range. It can be used as a selective recognition Fe³âº and BHb of thiacalix[4] arene fluorescent probe.

A study of allosteric binding behaviour of a 1,3-alternate thiacalix[4]arene-based receptor using fluorescence signal.

A novel heteroditopic thiacalix[4]arene receptor L possessing 1,3-alternate conformation, which contains two pyrene moieties attached to the lower rim via urea linkages together with a crown ether moiety appended at the opposite side of the thiacalix[4]arene cavity, has been synthesized. The complexation behaviour of receptor L was studied by means of fluorescence spectra and (1)H NMR titration experiments in the presence of K(+) ions and a variety of other anions. The results suggested that receptor L can complex efficiently via the urea cavity or the crown ether moiety, and a positive/negative allosteric effect operating in receptor L was observed.

Regulable high-contrast mechanofluorochromic enhancement behaviour based on substituent effects.

Herein, a facile strategy was established to build mechanoresponsive luminogens with high sensitivity to substituents and positional effects. Even in slightly different structures, distinct optical phenomena, including fluorescence efficiency and mechano-responsive properties, were clearly present. Outstanding mechanical-induced emission enhancement (5-100 times) properties and reversibility makes for promising applications in pressure sensors and OLEDs.

Tri-substituted hexahomotrioxacalix[3]arene derivatives bearing imidazole units: synthesis and extraction properties for cations and chromate anions.

The article describes the synthesis and extraction properties of the new hexahomotrioxacalix[3]arenebased derivatives cone- and partial-cone-2 bearing 1-methyl-1H-imidazole moieties at the lower rim. It has been demonstrated that O-alkylation of the flexible macrocycle 1 with 2-(chloromethyl)-1-methyl-1Himidazole hydrochloride affords tri-O-alkylated products with a cone or partial-cone conformation. Alkali metal salts such as NaH and Cs2CO3 can play an important role in the conformer distribution via a template effect. The conformation of receptors 2 has been confirmed by X-ray crystallographic analysis. Furthermore, the complexation properties of receptors 2 toward selected alkali/transition metal cations and alkylammonium ions are reported. The new 1-methyl-1H-imidazole-substituted hexahomotrioxacalix[3] arene frameworks are also efficient extractors of HCr2O7(-)/Cr2O7(2-) anions at low pH.

Pyrene-cored blue-light emitting [4]helicenes: synthesis, crystal structures, and photophysical properties.

The synthesis, crystal structures and photophysical properties of two types of pyrene-cored blue-light emitting [4]helicenes (7 and 9) are reported. The chemical structures of all synthesized compounds were fully confirmed by 1H and 13C NMR spectra, mass spectroscopy as well as elemental analysis. Single-crystal X-ray analysis of these [4]helicenes revealed that there are two types of laterally naphthalene annulated helical architectures, which are clearly influenced by different R substituents. The photophysical properties of the [4]helicenes (7 and 9) were fully investigated in both solutions and films, along with the pre-cyclization products, 4,9- and 4,10-bis(phenylethenyl)pyrenes (6 and 8). Notable optical features were obtained in these compounds, which make them promising candidates for several important applications in modern electronic and optoelectronic devices, such as blue emitters in organic light-emitting devices (OLEDs), or as models for further exploring the development of a new generation of organic materials based on pyrene.

Synthesis and photophysical properties of novel butterfly-shaped blue emitters based on pyrene.

Using 1,3,5,9-tetrabromo-7-tert-butylpyrene as the bromide precursor, a series of novel butterfly-shaped 1,3,5,9-tetraaryl substituted pyrene derivatives were synthesized by the Suzuki-Miyaura cross-coupling reaction. Their thermal, photophysical, electrochemical and related properties were systematically investigated. All compounds were found to exhibit high thermal stabilities with decomposition temperatures (Td) of up to 300 °C. All compounds show highly blue fluorescence emissions in the spectral region of 412-469 nm in solution (Φf: 0.45-0.92) and 410-470 nm in the solid- state (Φf: 0.48-0.75). It is noteworthy that these butterfly-shaped pyrenes 4 possess low-lying HOMO levels ranging from -4.76 to -5.93 eV, which make them promising candidates in OLED applications.

Highly emissive hand-shaped π-conjugated alkynylpyrenes: synthesis, structures, and photophysical properties.

Three alkynyl-functionalised, hand-shaped, highly fluorescent and stable emitters, namely, 2-tert-butyl-4,5,7,9,10-pentakis(p-R-phenylethynyl)pyrenes have been successfully synthesized via a Pd/Cu-catalysed Sonogashira cross-coupling reaction. The chemical structures of the alkynylpyrenes were fully characterized by their (1)H/(13)C NMR spectra, mass spectroscopy and elemental analysis. Synchrotron single-crystal X-ray analysis revealed that there is a 1-D, slipped, face-to-face motif with off-set, head-to-tail stacked columns, which are clearly influenced by the single, bulky, tert-butyl group in the pyrene ring at the 2-position. Detailed studies on the photophysical properties in both solutions and thin films strongly indicate that they might be promising candidates for optoelectronic applications, such as organic light-emitting devices (OLEDs) or as models for investigating the fluorescent structure-property relationship of the alkynyl-functionalised pyrene derivatives.

Hexahomotrioxacalix[3]arene derivatives as ionophores for molecular recognition of dopamine, serotonin and phenylethylamine.

The lower rim functionalized hexahomotrioxacalix[3]arene derivatives cone-3 and cone-5 bearing three benzyl and three N,N-diethyl-2-aminoethoxy groups, respectively, were synthesized from triol 1. Their complexation with 2-(3,4-dihydroxyphenyl)ethylamine (dopamine), 5-hydroxytryptamine (serotonin), and 2-phenylethylamine (phenethylamine), which have biologically important activities, has been studied by (1)H-NMR spectroscopy. The chemical shifts of the aromatic protons of the host and guest molecules and the up-field shifts of the ethyl protons of the guest molecules strongly suggest the formation of inclusion complexes in solution. The formation of the host-guest complexes is assisted by a hydrogen bond and/or an electrostatic interaction between the host and ammonium ion (RNH(3)(+)) of the guest. The structures of receptors cone-3 and cone-5 have been determined by X-ray crystallography.

Ratiometric fluorescent receptors for both Zn2+ and H2PO4(-) ions based on a pyrenyl-linked triazole-modified homooxacalix[3]arene: a potential molecular traffic signal with an R-S latch logic circuit.

A ratiometric fluorescent receptor with a C(3) symmetric structure based on a pyrene-linked triazole-modified homooxacalix[3]arene (L) was synthesized and characterized. This system exhibited an interesting ratiometric detection signal output for targeting cations and anions through switching the excimer emission of pyrene from the "on-off" to the "off-on" type in neutral solution. (1)H NMR titration results suggested that the Zn(2+) center of receptor L·Zn(2+) provided an excellent pathway of organizing anion binding groups for optimal host-guest interactions. It is thus believed that this receptor has potential application in sensing, detection, and recognition of both Zn(2+) and H(2)PO(4)(-) ions with different optical signals. In addition, the fluorescence emission changes by the inputs of Zn(2+) and H(2)PO(4)(-) ions can be viewed as a combinational R-S latch logic circuit at the molecular level.

Novel ion-pair receptors based on hexahomotrioxacalix[3]arene derivatives.

A series of novel heteroditopic hexahomotrioxacalix[3]arene triamide receptors capable of binding an anion and cation simultaneously in a cooperative fashion has been prepared. The lower rim functionalized cone-hexahomotrioxacalix[3]arene derivatives cone-5a-5d bearing three amide groups were synthesized from cone-3 by a stepwise reaction. The crystal structures of 5c and 5d and (1)H NMR studies in nonpolar solvents strongly indicate that a number of interesting intramolecular hydrogen bonding interactions exist in these receptors. The binding abilities of these compounds towards n-butylammonium chloride and bromide salts have been investigated using (1)H NMR titration experiments in CDCl(3) solvent. Owing to the 'flattened cone' conformations and intramolecular hydrogen bonding involving the amide NH and neighbouring O atoms in cone-5a-5d, the affinities toward n-Bu(4)NX (X = Cl(-) and Br(-)) were weakened. However, it should be noted that triamides cone-5a-5d show a single selectivity for halide anions in the presence of n-BuNH(3)(+) through intermolecular hydrogen bonding with the amide NH hydrogen atoms in the receptors in CDCl(3) solution. Association constants were calculated from the chemical shift changes of the amide protons.

Lithium calix[4]arenes: structural studies and use in the ring opening polymerization of cyclic esters.

We have structurally characterized a number of lithiated calix[4]arenes, where the bridge in the calix[4]arene is thia (-S-, LSH4), sulfinyl (-SO-, LSOH4), sulfonyl (-SO2-, LSO2H4), dimethyleneoxa (-CH2OCH2-, LCOCH4) or methylene (-CH2-, LH4). In the case of L4SH4, interaction with LiOtBu led to the isolation of the complex [Li8(L4S)2(THF)4]·5THF (1·5THF), whilst similar interaction of L4SOH4 led to the isolation of [Li6(L4SOH)2(THF)2]·5(THF) (2·5THF). Interestingly, the mixed sulfinyl/sulfonyl complexes [Li8(calix[4]arene(SO)(SO2)(SO1.68)2)2(THF)6]·8(THF) (3·8THF) and [Li5Na(LSO/3SO2H)2(THF)5]·7.5(THF) (4·7.5(THF) have also been characterized. Interaction of LiOtBu with LSO2H4 and LCOCH4 afforded [Li5L4SO2(OH)(THF)4]·2THF (5·2THF) and [Li6(LCOC)2(HOtBu)2]·0.78THF·1.22hexane (6·0.78THF·1.22hexane), respectively. In the case of LH4, reaction with LiOtBu in THF afforded a monoclinic polymorph [LH2Li2(thf)(OH2)2]·3THF (7·3THF) of a known triclinic form of the complex, whilst reaction of the de-butylated analogue of LH4, namely de-BuLH4, afforded a polymeric chain structure {[Li5(de-BuL)(OH)(NCMe)3]·2MeCN} n (8·2MeCN). For comparative catalytic studies, the complex [Li6(LPr)2(H2O)2]·hexane (9 hexane), where LPr2H2 = 1,3-di-n-propyloxycalix[4]areneH2, was also prepared. The molecular crystal structures of 1-9 are reported, and their ability to act as catalysts for the ring opening (co-)/polymerization (ROP) of the cyclic esters ε-caprolactone, δ-valerolactone, and rac-lactide has been investigated. In most of the cases, complex 6 outperformed the other systems, allowing for higher conversions and/or greated polymer M n.