RESUMEN
The eutrophication of aquaculture water bodies seriously restricts the healthy development of the aquaculture industry. Among them, microcystins are particularly harmful. Therefore, the development of technologies for degrading microcystins is of great significance for maintaining the healthy development of the aquaculture industry. The feasibility and mechanism of removing microcystins-LR by dielectric barrier discharge (DBD) plasma were studied. DBD discharge power of 49.6 W and a treatment time of 40 min were selected as the more suitable DBD parameters, resulting in microcystin-LR removal efficiency of 90.4%. Meanwhile, the effects of initial microcystin-LR concentration, initial pH value, turbidity, anions on the degradation effect of microcystin-LR were investigated. The removal efficiency of microcystin-LR decreased with the increase of initial microcystin-LR concentration and turbidity. The degradation efficiency of microcystin-LR at pH 4.5 and 6.5 is significantly higher than that at pH 8.5 and 3.5. HCO3- can inhibit the removal efficiency of microcystin-LR. Furthermore, five intermediates products (m/z = 1029.5, 835.3, 829.3, 815.4, 642.1) were identified in this study, and the toxicity analysis of these degradation intermediates indicated that DBD treatment can reduce the toxicity of microcystin-LR. eï¼aq, â¢OH, H2O2, and O3 have been shown to play a major role in the degradation of microcystin-LR, and the contribution ranking of these active species is eï¼aq > â¢OH > H2O2 > O3. The application of DBD plasma technology in microcystin-LR removal and detoxification has certain development potential.
Asunto(s)
Microcistinas , Agua , Microcistinas/análisis , Peróxido de Hidrógeno , Temperatura , AcuiculturaRESUMEN
Tetramethylammonium hydroxide (TMAH) is widely used as a developer and etchant in the thin-film transistor liquid crystal display industry, which is the main component of developer wastewater with low C/N ratio. This study investigated TMAH degradation by combined anaerobic/integrated fixed film activated sludge (A/IFAS) process, especially for nitrogen removal. Effects of process condition on the TMAH degradation were studied, including dissolved oxygen concentration in IFAS reactor and the temperature of anaerobic reactor. Especially, the nitrogen removal was studied through the monitoring of intermediate products during TMAH biodegradation. The results indicated that lower the anaerobic treatment temperature can provide more available organic matters to enhance the denitrification in the subsequent IFAS reactor. Less oxygen supply in the IFAS reactor contributed to simultaneous nitrification and denitrification. Removal efficiency of total organic carbon and total nitrogen was up to 95.8% and 80.7%, when the temperature of anaerobic treatment was controlled at 30 °C with the DO kept at 0.7 mg/L. It indicated that A/IFAS process was efficient in carbon and nitrogen removal for TMAH degradation. The results also confirmed intermediate products of TMAH biodegradation can be used as the electron donor during denitrification, including trimethylamine, dimethylamine and methylamine. Illumina MiSeq sequencing showed that Proteobacteria was the dominant phylum contribute to nitrogen removal. Compared to sludge flocs in IFAS reactor, richer community and higher microbial diversity were observed in the biofilm.
Asunto(s)
Compuestos de Amonio Cuaternario , Aguas del Alcantarillado , Aguas Residuales , Aguas del Alcantarillado/microbiología , Nitrógeno/metabolismo , Desnitrificación , Anaerobiosis , Carbono , Reactores Biológicos/microbiologíaRESUMEN
Harmful cyanobacterial bloom is one of the serious environmental problems worldwide. Microcystis aeruginosa is a representative harmful alga in cyanobacteria bloom. It is of great significance to develop new technologies for the removal of Microcystis aeruginosa and microcystins. The feasibility and mechanism of removing microcystis aeruginosa and degrading microcystins by dielectric barrier discharge (DBD) plasma were studied. The suitable DBD parameters obtained in this study are DBD (41.5 W, 40 min) and DBD (41.5 W, 50 min), resulting in algae removal efficiency of 77.4% and 80.4%, respectively; scanning electron microscope and LIVE-DEATH analysis demonstrate that DBD treatment can disrupt cell structure and lead to cell death; analysis of elemental composition and chemical state indicated that there are traces of oxidation of organic nitrogen and organic carbon in microcystis aeruginosa; further intracellular ROS concentration and antioxidant enzyme activity analysis confirm that DBD damage microcystis aeruginosa through oxidation. Meanwhile, DBD can effectively degrade the microcystin-LR released after cell lysis, the extracellular microcystin-LR concentration in the DBD (41.5 W) group decreased by 88.7% at 60 min compared to the highest concentration at 20 min; further toxicity analysis of degradation intermediates indicated that DBD can reduce the toxicity of microcystin-LR. The contribution of active substances to the inactivation of microcystis aeruginosa is eaq- > â¢OH > H2O2 > O3 > 1O2 > â¢O2- > ONOO-, while on the degradation of microcystin-LR is eaq- > â¢OH > H2O2 > O3 > â¢O2- > 1O2 > ONOO-. The application of DBD plasma technology in microcystis aeruginosa algae removal and detoxification has certain prospects for promotion and application.
Asunto(s)
Cianobacterias , Toxinas Marinas , Microcystis , Microcystis/metabolismo , Floraciones de Algas Nocivas , Microcistinas/química , Peróxido de Hidrógeno/metabolismo , Estudios de Factibilidad , Cianobacterias/metabolismo , Antioxidantes/metabolismoRESUMEN
Cardiovascular diseases are the leading cause of mortality, and accurate segmentation of ventricular regions incardiac magnetic resonance images (MRIs) is crucial for diagnosing and treating these diseases. However, fully automated and accurate right ventricle (RV) segmentation remains challenging due to the irregular cavities with ambiguous boundaries and mutably crescentic structures with relatively small targets of the RV regions in MRIs. In this article, a triple-path segmentation model, called FMMsWC, is proposed by introducing two novel image feature encoding modules, i.e., the feature multiplexing (FM) and multiscale weighted convolution (MsWC) modules, for the RV segmentation in MRIs. Considerable validation and comparative experiments were conducted on two benchmark datasets, i.e., the MICCAI2017 Automated Cardiac Diagnosis Challenge (ACDC), and the Multi-Centre, Multi-Vendor & Multi-Disease Cardiac Image Segmentation Challenge (M&MS) datasets. The FMMsWC outperforms state-of-the-art approaches, and its performance can approach that of the manual segmentation results by clinical experts, facilitating accurate cardiac index measurement for the rapid assessment of cardiac function and aiding diagnosis and treatment of cardiovascular diseases, which has great potential for clinical applications.
Asunto(s)
Enfermedades Cardiovasculares , Ventrículos Cardíacos , Humanos , Ventrículos Cardíacos/diagnóstico por imagen , Imagen por Resonancia Cinemagnética/métodos , Imagen por Resonancia Magnética/métodos , Corazón , Procesamiento de Imagen Asistido por Computador/métodosRESUMEN
Rutin, a flavonoid found in fruits and vegetables, is a potential anticancer compound with strong anticancer activity. Therefore, electrochemical sensor was developed for the detection of rutin. In this study, CoWO4 nanosheets were synthesized via a hydrothermal method, and porous carbon (PC) was prepared via high-temperature pyrolysis. Successful preparation of the materials was confirmed, and characterization was performed by transmission electron microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy. A mixture of PC and CoWO4 nanosheets was used as an electrode modifier to fabricate the electrochemical sensor for the electrochemical determination of rutin. The 3D CoWO4 nanosheets exhibited high electrocatalytic activity and good stability. PC has a high surface-to-volume ratio and superior conductivity. Moreover, the hydrophobicity of PC allows large amounts of rutin to be adsorbed, thereby increasing the concentration of rutin at the electrode surface. Owing to the synergistic effect of the 3D CoWO4 nanosheets and PC, the developed electrochemical sensor was employed to quantitively determine rutin with high stability and sensitivity. The sensor showed a good linear range (5-5000 ng/mL) with a detection limit of 0.45 ng/mL. The developed sensor was successfully applied to the determination of rutin in crushed tablets and human serum samples.
RESUMEN
Rutin,a flavonoid found in fruits and vegetables,is a potential anticancer compound with strong anti-cancer activity.Therefore,electrochemical sensor was developed for the detection of rutin.In this study,CoWO4 nanosheets were synthesized via a hydrothermal method,and porous carbon(PC)was prepared via high-temperature pyrolysis.Successful preparation of the materials was confirmed,and character-ization was performed by transmission electron microscopy,scanning electron microscopy,and X-ray photoelectron spectroscopy.A mixture of PC and CoWO4 nanosheets was used as an electrode modifier to fabricate the electrochemical sensor for the electrochemical determination of rutin.The 3D CoWO4 nanosheets exhibited high electrocatalytic activity and good stability.PC has a high surface-to-volume ratio and superior conductivity.Moreover,the hydrophobicity of PC allows large amounts of rutin to be adsorbed,thereby increasing the concentration of rutin at the electrode surface.Owing to the syn-ergistic effect of the 3D CoWO4 nanosheets and PC,the developed electrochemical sensor was employed to quantitively determine rutin with high stability and sensitivity.The sensor showed a good linear range(5-5000 ng/mL)with a detection limit of O.45 ng/mL.The developed sensor was successfully applied to the determination of rutin in crushed tablets and human serum samples.
RESUMEN
Antimicrobial-resistant infections are an urgent public health threat, and development of novel antimicrobial therapies has been painstakingly slow. Polymicrobial infections are increasingly recognized as a significant source of severe disease and also contribute to reduced susceptibility to antimicrobials. Chronic infections also are characterized by their ability to resist clearance, which is commonly linked to the development of biofilms that are notorious for antimicrobial resistance. The use of engineered cationic antimicrobial peptides (eCAPs) is attractive due to the slow development of resistance to these fast-acting antimicrobials and their ability to kill multidrug-resistant clinical isolates, key elements for the success of novel antimicrobial agents. Here, we tested the ability of an eCAP, WLBU2, to disrupt recalcitrant Pseudomonas aeruginosa biofilms. WLBU2 was capable of significantly reducing biomass and viability of P. aeruginosa biofilms formed on airway epithelium and maintained activity during viral coinfection, a condition that confers extraordinary levels of antibiotic resistance. Biofilm disruption was achieved in short treatment times by permeabilization of bacterial membranes. Additionally, we observed simultaneous reduction of infectivity of the viral pathogen respiratory syncytial virus (RSV). WLBU2 is notable for its ability to maintain activity across a broad range of physiological conditions and showed negligible toxicity toward the airway epithelium, expanding its potential applications as an antimicrobial therapeutic. IMPORTANCE Antimicrobial-resistant infections are an urgent public health threat, making development of novel antimicrobials able to effectively treat these infections extremely important. Chronic and polymicrobial infections further complicate antimicrobial therapy, often through the development of microbial biofilms. Here, we describe the ability of an engineered antimicrobial peptide to disrupt biofilms formed by the ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) pathogen Pseudomonas aeruginosa during coinfection with respiratory syncytial virus. We also observed antiviral activity, indicating the ability of engineered antimicrobial peptides to act as cross-kingdom single-molecule combination therapies.
RESUMEN
ETHNOPHARMACOLOGICAL RELEVANCE: Zeng-Sheng-Ping (ZSP), also called antitumor B, is a marketed Chinese traditional medicine used for cancer prevention. AIM OF THE STUDY: Currently, for the quality control of Chinese traditional medicines, marker compounds are not selected based on bioactivities and pharmaceutical behaviors in most of the cases. Therefore, even if the "quality" of the medicine is controlled, the pharmacological effect could still be inconsistent. The aim of this study is to establish an activity and absorption-based platform to select marker compound(s) for the quality control of Chinese traditional medicines. MATERIALS AND METHODS: We used ZSP as a reference Chinese traditional medicine to establish the platform. Activity guided fractionation approach was used to purify the major components from ZSP. NMR and MS spectra were used to elucidate the structure of the isolated compounds. MTT assay against oral carcinoma cell line (SCC2095) was performed to evaluate the activities. UPLC-MS/MS was used to quantify the pure compounds in ZSP and the active fraction. The permeabilities of the identified compounds were evaluated in the Caco-2 cell culture model. The intracellular accumulation of the isolated compounds was evaluated in the SCC2095 cells. RESULTS: The major compounds were identified from ZSP. The contents, anti-proliferation activities, permeabilities, and intracellular accumulations of these compounds were also evaluated. The structure of these purified compounds were identified by comparing the NMR and MS data with those of references as rutaevine (1), limonin (2), evodol (3), obacunone (4), fraxinellone (5), dictamnine (6), maackiain (7), trifolirhizin (8), and matrine (9). The IC50 of compounds 5, 6, and 7 against SCC2095 cells were significantly lower than that of ZSP. The uptake permeability of compounds 5, 6, and 7 were 2.58 ± 0.3 × 10(-5), 4.33 ± 0.5 × 10(-5), and 4.27 ± 0.8 × 10(-5) respectively in the Caco-2 cell culture model. The intracellular concentrations of these compounds showed that compounds 5, 6, and 7 were significantly accumulated inside the cells. CONCLUSION: Based on the activity against oral carcinoma cell line as well as the absorption permeability, compound 5, 6, and 7 are selected as quality control markers for ZSP. An activity and absorption-based platform was established and successfully used for the quality control of ZSP.
Asunto(s)
Proliferación Celular/efectos de los fármacos , Medicamentos Herbarios Chinos/química , Medicamentos Herbarios Chinos/farmacología , Medicina Tradicional China/normas , Control de Calidad , Alcaloides/análisis , Alcaloides/aislamiento & purificación , Benzofuranos/análisis , Benzofuranos/aislamiento & purificación , Benzoxepinas/análisis , Benzoxepinas/aislamiento & purificación , Línea Celular Tumoral , Glucósidos/análisis , Glucósidos/aislamiento & purificación , Glucósidos/farmacocinética , Compuestos Heterocíclicos de 4 o más Anillos/análisis , Compuestos Heterocíclicos de 4 o más Anillos/aislamiento & purificación , Compuestos Heterocíclicos de 4 o más Anillos/farmacocinética , Humanos , Limoninas/análisis , Limoninas/aislamiento & purificación , Permeabilidad , Pterocarpanos/análisis , Pterocarpanos/aislamiento & purificación , Pterocarpanos/farmacocinética , Quinolinas/análisis , Quinolinas/aislamiento & purificación , Quinolinas/farmacocinética , Quinolizinas/análisis , Quinolizinas/aislamiento & purificación , Triterpenos/análisis , Triterpenos/aislamiento & purificación , MatrinasRESUMEN
The purpose of this study is to develop an UPLC-MS/MS method to quantify 3-hydroxyflavone (3-HF) and its metabolite, 3-hydroxyflavone-glucuronide (3-HFG) from biological samples. A Waters BEH C8 column was used with acetonitrile/0.1% formic acid in water as mobile phases. The mass analysis was performed in an API 5500 Qtrap mass spectrometer via multiple reaction monitoring (MRM) with positive scan mood. The one-step protein precipitation by acetonitrile was used to extract the analytes from blood. The results showed that the linear response range was 0.61-2500.00 nM for 3-HF and 0.31-2500.00 nM for 3-HFG. The intra-day variance is less than 16.5% and accuracy is in 77.7-90.6% for 3-HF and variance less than 15.9%, accuracy in 85.1-114.7% for 3-HFG. The inter-day variance is less than 20.2%, accuracy is in 110.6-114.2% for 3-HF and variance less than 15.6%, accuracy in 83.0-89.4% for 3-HFG. The analysis was done within 4.0 min. Only 10 µl of blood is needed due to the high sensitivity of this method. The validated method was successfully used to pharmacokinetic study in A/J mouse, transport study in the Caco-2 cell culture model, and glucuronidation study using mice liver and intestine microsomes. The applications revealed that this method can be used for 3-HF and 3-HFG analysis in blood as well as in bioequivalent buffers such HBSS and KPI.