Enhanced diabetic wound healing using platelet-derived extracellular vesicles and reduced graphene oxide in polymer-coordinated hydrogels.

Impaired wound healing is a significant complication of diabetes. Platelet-derived extracellular vesicles (pEVs), rich in growth factors and cytokines, show promise as a powerful biotherapy to modulate cellular proliferation, angiogenesis, immunomodulation, and inflammation. For practical home-based wound therapy, however, pEVs should be incorporated into wound bandages with careful attention to delivery strategies. In this work, a gelatin-alginate hydrogel (GelAlg) loaded with reduced graphene oxide (rGO) was fabricated, and its potential as a diabetic wound dressing was investigated. The GelAlg@rGO-pEV gel exhibited excellent mechanical stability and biocompatibility in vitro, with promising macrophage polarization and reactive oxygen species (ROS)-scavenging capability. In vitro cell migration experiments were complemented by in vivo investigations using a streptozotocin-induced diabetic rat wound model. When exposed to near-infrared light at 2 W cm- 2, the GelAlg@rGO-pEV hydrogel effectively decreased the expression of inflammatory biomarkers, regulated immune response, promoted angiogenesis, and enhanced diabetic wound healing. Interestingly, the GelAlg@rGO-pEV hydrogel also increased the expression of heat shock proteins involved in cellular protective pathways. These findings suggest that the engineered GelAlg@rGO-pEV hydrogel has the potential to serve as a wound dressing that can modulate immune responses, inflammation, angiogenesis, and follicle regeneration in diabetic wounds, potentially leading to accelerated healing of chronic wounds.

Tooth discoloration and the effects of internal bleaching on the novel endodontic filling material SavDen® MTA.

BACKGROUND/PURPOSE: Mineral trioxide aggregate (MTA) was widely used in endodontic therapy as bioceramic material. Although MTA has high biocompatibility, it may lead to tooth discoloration. The aim of this study was to investigate the discoloration of two different bioceramic materials and the effects of internal bleaching. METHODS: Thirty single-canal mandibular premolars were extracted and randomly assigned to three groups (n = 10), white ProRoot® MTA, SavDen® MTA and a control group. Endodontic access opening, cleaning and shaping were performed, then the teeth were obturated using the two bioceramic materials. Tooth color was recorded at baseline, day 1, and 1, 2, 4, 6, 8, 12, 16, and 24 weeks after treatment. At the end of 24 weeks, sodium perborate was used to perform internal bleaching. Tooth color was recorded at 1, 2, and 6 weeks subsequently. Teeth were measured using a DeguDent® spectrophotometer, and data were transformed into Commission Internationale de l'Eclairage (CIE) L∗a∗b∗ system. RESULTS: Teeth treated with white ProRoot® MTA showed significant color change and decrease in L∗ value. Internal bleaching leaded to decrease of the ΔE∗ value for all three groups and increase in the L∗ value. There was no difference in tooth discoloration between SavDen® MTA and the control group after obturation and internal bleaching. CONCLUSION: In terms of visual perception, white ProRoot® MTA tends to cause black and blue discoloration. SavDen® MTA, formulated with calcium lactate gluconate, could be used to reduce tooth discoloration in endodontic treatment.

Conferring biological activity to native spider silk: A biofunctionalized protein-based microfiber.

Spider silk is an extraordinary material with physical properties comparable to the best scaffolding/structural materials, and as a fiber it can be manipulated with ease into a variety of configurations. Our work here demonstrates that natural spider silk fibers can also be used to organize biological components on and in devices through rapid and simple means. Micron scale spider silk fibers (5-10 µm in diameter) were surface modified with a variety of biological entities engineered with pentaglutamine tags via microbial transglutaminase (mTG). Enzymes, enzyme pathways, antibodies, and fluorescent proteins were all assembled onto spider silk fibers using this biomolecular engineering/biofabrication process. Additionally, arrangement of biofunctionalized fiber should in of itself generate a secondary level of biomolecular organization. Toward this end, as proofs of principle, spatially defined arrangement of biofunctionalized spider silk fiber was shown to generate effects specific to silk position in two cases. In one instance, arrangement perpendicular to a flow produced selective head and neck carcinoma cell capture on silk with antibodies complexed to conjugated protein G. In a second scenario, asymmetric bacterial chemotaxis arose from asymmetric conjugation of enzymes to arranged silk. Overall, the biofabrication processes used here were rapid, required no complex chemistries, were biologically benign, and also the resulting engineered silk microfibers were flexible, readily manipulated and functionally active. Deployed here in microfluidic environments, biofunctional spider silk fiber provides a means to convey complex biological functions over a range of scales, further extending its potential as a biomaterial in biotechnological settings. Biotechnol. Bioeng. 2017;114: 83-95. © 2016 Wiley Periodicals, Inc.

Optimization and Evaluation of a Chitosan/Hydroxypropyl Methylcellulose Hydrogel Containing Toluidine Blue O for Antimicrobial Photodynamic Inactivation.

Photodynamic inactivation (PDI) combined with chitosan has been shown as a promising antimicrobial approach. The purpose of this study was to develop a chitosan hydrogel containing hydroxypropyl methylcellulose (HPMC), chitosan and toluidine blue O (TBO) to improve the bactericidal efficacy for topical application in clinics. The PDI efficacy of hydrogel was examined in vitro against the biofilms of Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). Confocal scanning laser microscopy (CSLM) was performed to investigate the penetration level of TBO into viable S. aureus biofilms. Incorporation of HMPC could increase the physicochemical properties of chitosan hydrogel including the hardness, viscosity as well as bioadhesion; however, higher HMPC concentration also resulted in reduced antimicrobial effect. CSLM analysis further demonstrated that higher HPMC concentration constrained TBO diffusion into the biofilm. The incubation of biofilm and hydrogel was further performed at an angle of 90 degrees. After light irradiation, compared to the mixture of TBO and chitosan, the hydrogel treated sample showed increased PDI efficacy indicated that incorporation of HPMC did improve antimicrobial effect. Finally, the bactericidal efficacy could be significantly augmented by prolonged retention of hydrogel in the biofilm as well as in the animal model of rat skin burn wounds after light irradiation.

Progesterone modulates cell growth via integrin αvß3-dependent pathway in progesterone receptor-negative MDA-MB-231 cells.

Progesterone (P4) plays a pivotal role in regulating the cancer progression of various types, including breast cancer, primarily through its interaction with the P4 receptor (PR). In PR-negative breast cancer cells, P4 appears to function in mediating cancer progression, such as cell growth. However, the mechanisms underlying the roles of P4 in PR-negative breast cancer cells remain incompletely understood. This study aimed to investigate the effects of P4 on cell proliferation, gene expression, and signal transduction in PR-negative MDA-MB-231 breast cancer cells. P4-activated genes, associated with proliferation in breast cancer cells, exhibit a stimulating effect on cell growth in PR-negative MDA-MB-231 cells, while demonstrating an inhibitory impact in PR-positive MCF-7 cells. The use of arginine-glycine-aspartate (RGD) peptide successfully blocked P4-induced extracellular signal-regulated kinase 1/2 (ERK1/2) activation, aligning with computational models of P4 binding to integrin αvß3. Disrupting integrin αvß3 binding with RGD peptide or anti-integrin αvß3 antibody altered P4-induced expression of proliferative genes and modified P4-induced cell growth in breast cancer cells. In conclusion, integrin αvß3 appears to mediate P4-induced ERK1/2 signal pathway to regulate proliferation via alteration of proliferation-related gene expression in PR-negative breast cancer cells.

Development of a zinc chloride-based chemo-mechanical system for potential minimally invasive dental caries removal system.

Background/purpose: The chemo-mechanical caries-removal technique is known to offer advantages of selective dentin caries treatment while leaving healthy dental tissues intact. However, current sodium hypochlorite based reagents usually excessively damage dentin collagen. Therefore, the purpose of this study was to develop a novel chemo-mechanical caries-removal system to preserve the collagen network for subsequent prosthetic restorations. Materials and methods: The calfskin-derived collagen was chosen as a model system to investigate the dissolution behavior of collagen under different operating conditions of chemical-ultrasonic treatment systems. The molecular weight, triple-helix structure, the morphology, and functional group of collagen after treatment were investigated. Results: Various concentrations of sodium hypochlorite or zinc chloride together with ultrasonic machinery were chosen to investigate. The outcomes of circular dichroism (CD) spectra demonstrated stability of the triple-helix structure after treatment of a zinc chloride solution. In addition, two apparent bands at molecular weights (MWs) of 130 and 121 kDa evidenced the stability of collagen network. The positive 222 nm and 195 nm negative CD absorption band indicated the existence of a triple-helix structure for type I collagen. The preservation of the morphology and functional group of the collagen network on the etched dentin surface were investigated by in vitro dentin decalcification model. Conclusion: Unlike NaOCl, the 5 wt% zinc chloride solution combined with ultra-sonication showed dissolution rather than denature as well as degradation of the dentin collagen network. Additional in vivo evaluations are needed to verify its usefulness in clinical applications.

A Novel Endodontic Approach in Removing Smear Layer Using Nano and Submicron Diamonds with Intracanal Oscillation Irrigation.

Sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic acid (EDTA) are commonly recommended for effectively removing organic and inorganic components in the smear layer. This layer is found on root canal walls after root canal instrumentation. However, high-concentration EDTA reduces the strength of dentin and the dissolution efficacy of organic substances in NaOCl solution. The objective of this study was to investigate the efficacy of applying nano and submicron diamonds in irrigation solutions with sonic and ultrasonic oscillation for removing the smear layer during endodontic treatment. Extracted single-rooted human teeth were instrumented with ProTaper® Gold (Dentsply Sirona) nickel-titanium rotary instruments. Subsequently, each canal was irrigated with 3% NaOCl, 17% EDTA, distilled water, and 10-1000 nm-sized nano and submicron diamond irrigation solutions, respectively. Sonic and ultrasonic instruments were compared for oscillating the irrigation solutions. The teeth were processed for scanning electron microscopy to observe the efficiency of smear layer removal on the canal walls. Our results indicated that diamond sizes of 50 nm and above irrigation solutions showed significant effectiveness in removing the smear layer following the oscillation of sonic instruments for 10 s. Ultrasonic assisted 500 nm and 1000 nm diamond solutions significantly differed from the other diamond-sized solution in their ability to remove the smear layer. These results suggest that sonic and ultrasonic oscillation with specific sizes of nano and submicron diamond irrigation solution can be used as an alternative approach to removing the smear layer during endodontic treatment. The potential clinical application of root canal treatments can be expected.

Self-nanoemulsifying drug delivery system (SNEDDS) mediated improved oral bioavailability of thymoquinone: optimization, characterization, pharmacokinetic, and hepatotoxicity studies.

Thymoquinone (TQ) is an antioxidant, anti-inflammatory, and hepatoprotective compound obtained from the black seed oil of Nigella sativa. However, high hydrophobicity, instability at higher pH levels, photosensitivity, and low oral bioavailability hinder its delivery to the target tissues. A self-nanoemulsifying drug delivery system (SNEDDS) was fabricated using the microemulsification technique to address these issues. Its physicochemical properties, thermodynamic stability studies, drug release kinetics, in vivo pharmacokinetics, and hepatoprotective activity were evaluated. The droplet size was in the nano-range (< 90 nm). Zeta potential was measured to be -11.35 mV, signifying the high stability of the oil droplets. In vivo pharmacokinetic evaluation showed a fourfold increase in the bioavailability of TQ-SNEDDS over pure TQ. Furthermore, in a PCM-induced animal model, TQ-SNEDDS demonstrated significant (p < 0.05) hepatoprotective activity compared to pure TQ and silymarin. Reduction in liver biomarker enzymes and histopathological examinations of liver sections further supported the results. In this study, SNEDDS was demonstrated to be an improved oral delivery method for TQ, since it potentiates hepatotoxicity and enhances bioavailability.

Magnetic cryopreservation for dental pulp stem cells.

Magnetic cryopreservation has been successfully used for tooth banking with satisfactory implantation outcomes, suggesting that the method preserves human periodontal ligament cells and dental pulp stem cells (DPSCs). Therefore, magnetic cryopreservation may be applied for the preservation of DPSCs; however, this method has not been evaluated yet. A reliable cryopreservation method for live-cell preservation is important for the clinical applications of regenerative medicine. The conventional slow-freezing procedure with 10% dimethylsulfoxide (DMSO) may not be appropriate for stem cell-based therapies because DMSO is cytotoxic. The objective of this study was to investigate whether magnetic cryopreservation can be applied for DPSC cryopreservation. Cells isolated from human dental pulp were subjected to magnetic cryopreservation. Postthawing cell viability, adhesion, proliferation, expression of markers for mesenchymal stem cells (MSCs), differentiation ability of magnetically cryopreserved DPSCs and DNA stability were compared to those of cells subjected to the conventional slow-freezing method. The results indicated that a serum-free cryopreservation medium (SFM) containing 3% DMSO is optimal for magnetic cryopreservation. Post-thaw magnetically cryopreserved DPSCs express MSC markers, and perform osteogenesis and adipogenesis after induction similarly to fresh MSCs. No significant DNA damage was found in magnetically cryopreserved DPSCs. Magnetic cryopreservation is thus a reliable and effective method for storage of DPSCs. The smaller amount of DMSO required in SFM for cryopreservation is beneficial for the clinical applications of post-thaw cells in regenerative medicine.

The potential effects of cholecalciferol on bone regeneration in dogs.

OBJECTIVES: The aim of this investigation was to evaluate the potential effects of the systemically delivered combination of calcium supplementation and cholecalciferol and of the locally applied biphasic calcium alloplast on the surgically produced alveolar sockets at the early healing stage in a dog model. MATERIALS AND METHODS: The mandibular pre-molars of nine Beagle dogs were extracted first. Three months later, four standardized sockets with a 4 mm in diameter and 6 mm deep cylinder were created bilaterally at healed extraction sites. The sockets on one side were grafted with biphasic calcium phosphate alloplast, whereas the defects on the other side were left un-grafted. The dogs were then randomly divided into two groups; five dogs received oral calcium and cholecalciferol combination (Vit.D/Ca) and were assigned to the test group (Vit.D/Ca Group). The other four dogs without Vit.D/Ca supplement were distributed to the control group (Non-Vit.D/Ca Group). The bone density (Density) and the implant stability quotient (ISQ) at prepared sites were measured 4 weeks later. The drawn bone cores were examined by a histomorphometric analysis for measurement of new bone formation (NBF). The amount of vertical ridge resorption (VRR) was evaluated. RESULTS: The Vit.D/Ca-treated subjects revealed significantly more NBF (P < 0.05), higher bone density (P < 0.05) and significantly less vertical ridge reduction (P < 0.05) in the healing sockets than those without Vit.D/Ca treatment. The non-grafted sockets demonstrated significantly more NBF (P < 0.05), higher bone density (P < 0.05), better ISQ value (P < 0.05) and more vertical ridge reduction (P < 0.05) than those in the grafted sockets. There was no significant difference between the serum data determined before and 4 weeks after experiment in Vit.D/Ca Group or Non-Vit.D/Ca Group. However, the changed value (post-op vs. pre-op) between the two groups was significant in the serum level of phosphate and parathyroid hormone (P = 0.05). CONCLUSION: The results of the present study indicated that the examined calcium phosphate alloplast may perform a function in alveolar ridge preservation while reducing the potential of NBF potential in the healing extraction socket. Also, the combination of calcium supplementation and cholecalciferol may have systemic effects on accelerating bone regeneration.

Bone and joint protection ability of ceramic material with biological effects.

Ceramic materials with biological effects (bioceramic) have been found to modulate various biological effects, especially those effects involved in antioxidant activity and hydrogen peroxide scavenging. As arthropathy and osteopathy are the major chronic diseases of geriatric medicine, we explored the possible activity of bioceramic on these conditions using animal and cell models. Rabbits received intra-articular injections of lipopolysaccharides (LPS) to induce inflammation that mimic rheumatic arthritis. FDG isotopes were then IV injected for PET scan examinations at 16 hours and 7 days after the LPS injection. We examined and compared the bioceramic and control groups to see if bioceramic was capable of relieving inflammation in the joints by subtracting the final and initial uptake amount of FDG (max SUV). We studied the effects in prostaglandin E2 (PGE2) inhibition on the human chondrosarcoma (SW1353) cell line, and the effects on the murine osteoblast (MC3T3-E1) cell line under oxidative stress. All the subtractions between final and initial uptakes of FDG in the left knee joints of the rabbits after LPS injection indicated larger decreases in the bioceramic group than in the control group. This anti-arthritic or inflammatory effect was also demonstrated by the PGE2 inhibition of the SW1353 cells. We further proved that bioceramic treatment of the MC3T3-E1 cells resulted in increased viability of osteoblast cells challenged with hydrogen peroxide toxicity, and increased alkaline phosphatase activity and the total protein production of MC3T3-E1 cells under oxidative stress. Since LPS-induced arthritis is an experimental model that mimics RA, the potential therapeutic effects of bioceramic on arthropathy merit discussion. Bioceramic may contribute to relieving inflammatory arthritis and maintaining bone health.

Characterization and Antibacterial Properties of Polyetherketoneketone Coated with a Silver Nanoparticle-in-Epoxy Lining.

Polyetherketoneketone (PEKK) is an alternative material for use in removable partial denture frameworks; these frameworks must exhibit antibacterial properties to reduce the risk of periodontal disease. In the present study, silver nanoparticles (AgNPs) were synthesized via the reduction of silver nitrate with sodium borohydride in a solution containing polyvinyl pyrrolidone (PVP). Transmission electron microscope images and dynamic light scattering confirmed that metallic nanoparticles had been created with an average size of 32 nm. Furthermore, the coating of the PEKK polymeric substrate with 0.5% AgNPs was carried out using an epoxy resin lining at room temperature. Fourier transform infrared (FTIR) spectra confirmed the successful transfer of the AgNP-in-resin lining onto the polymeric substrate. Scanning electron microscopy and atomic force microscopy confirmed that the AgNPs had been uniformly deposited onto the PEKK specimens. Finally, the antibacterial activity of the specimens was tested against Porphyromonas gingivalis. An inhibition zone of 22.5 mm and an antibacterial rate of 83.47% were found for the PEKK coated with 0.5% AgNPs (0.5% Ag-PEKK) compared to an untreated polyetheretherketone (PEEK) substrate, evidencing that 0.5% Ag-PEKK has potential antibacterial properties for implant applications.

The Processing and Electrical Properties of Isotactic Polypropylene/Copper Nanowire Composites.

Polypropylene (PP), a promising engineering thermoplastic, possesses the advantages of light weight, chemical resistance, and flexible processability, yet preserving insulative properties. For the rising demand for cost-effective electronic devices and system hardware protections, these applications require the proper conductive properties of PP, which can be easily modified. This study investigates the thermal and electrical properties of isotactic polypropylene/copper nanowires (i-PP/CuNWs). The CuNWs were harvested by chemical reduction of CuCl2 using a reducing agent of glucose, capping agent of hexadecylamine (HDA), and surfactant of PEG-7 glyceryl cocoate. Their morphology, light absorbance, and solution homogeneity were investigated by SEM, UV-visible spectrophotometry, and optical microscopy. The averaged diameters and the length of the CuNWs were 66.4 ± 16.1 nm and 32.4 ± 11.8 µm, respectively. The estimated aspect ratio (L/D, length-to-diameter) was 488 ± 215 which can be recognized as 1-D nanomaterials. Conductive i-PP/CuNWs composites were prepared by solution blending using p-xylene, then melt blending. The thermal analysis and morphology of CuNWs were characterized by DSC, polarized optical microscopy (POM), and SEM, respectively. The melting temperature decreased, but the crystallization temperature increasing of i-PP/CuNWs composites were observed when increasing the content of CuNWs by the melt blending process. The WAXD data reveal the coexistence of Cu2O and Cu in melt-blended i-PP/CuNWs composites. The fit of the electrical volume resistivity (ρ) with the modified power law equation: ρ = ρo (V - Vc)-t based on the percolation theory was used to find the percolation concentration. A low percolation threshold value of 0.237 vol% and high critical exponent t of 2.96 for i-PP/CuNWs composites were obtained. The volume resistivity for i-PP/CuNWs composite was 1.57 × 107 Ω-cm at 1 vol% of CuNWs as a potential candidate for future conductive materials.

A Novel One-Pot Synthesis and Characterization of Silk Fibroin/α-Calcium Sulfate Hemihydrate for Bone Regeneration.

This study aims to fabricate silk fibroin/calcium sulfate (SF/CS) composites by one-pot synthesis for bone regeneration applications. The SF was harvested from degummed silkworm cocoons, dissolved in a solvent system comprising of calcium chloride:ethanol:water (1:2:8), and then mixed with a stoichiometric amount of sodium sulfate to prepare various SF/CS composites. The crystal pattern, glass transition temperature, and chemical composition of SF/CS samples were analyzed by XRD, DSC, and FTIR, respectively. These characterizations revealed the successful synthesis of pure calcium sulfate dihydrate (CSD) and calcium sulfate hemihydrate (CSH) when it was combined with SF. The thermal analysis through DSC indicated molecular-level interaction between the SF and CS. The FTIR deconvolution spectra demonstrated an increment in the ß-sheet content by increasing CS content in the composites. The investigation into the morphology of the composites using SEM revealed the formation of plate-like dihydrate in the pure CS sample, while rod-like structures of α-CSH surrounded by SF in the composites were observed. The compressive strength of the hydrated 10 and 20% SF-incorporated CSH composites portrayed more than a twofold enhancement (statistically significant) in comparison to that of the pure CS samples. Reduced compressive strength was observed upon further increasing the SF content, possibly due to SF agglomeration that restricted its uniform distribution. Therefore, the one-pot synthesized SF/CS composites demonstrated suitable chemical, thermal, and morphological properties. However, additional biological analysis of its potential use as bone substitutes is required.

An Insight into Nano Silver Fluoride-Coated Silk Fibroin Bioinspired Membrane Properties for Guided Tissue Regeneration.

The current work focuses on the development of a novel electrospun silk fibroin (SF) nonwoven mat as a GTR membrane with antibacterial, biomineralization and biocompatible properties. The γ-poly glutamic acid (γ-PGA)-capped nano silver fluoride (NSF) and silver diamine fluoride (SDF) were first synthesized, which were dip-coated onto electrospun silk fibroin mats (NSF-SF and SDF-SF). UV-Vis spectroscopy and TEM depicted the formation of silver nanoparticles. NSF-SF and SDF-SF demonstrated antibacterial properties (against Porphyromonas gingivalis) with 3.1 and 6.7 folds higher relative to SF, respectively. Post-mineralization in simulated body fluid, the NSF-SF effectively promoted apatite precipitation (Ca/P ~1.67), while the SDF-SF depicted deposition of silver nanoparticles, assessed by SEM-EDS. According to the FTIR-ATR deconvolution analysis, NSF-SF portrayed ~75% estimated hydroxyapatite crystallinity index (CI), whereas pure SF and SDF-SF demonstrated ~60%. The biocompatibility of NSF-SF was ~82% when compared to the control, while SDF-coated samples revealed in vitro cytotoxicity, further needing in vivo studies for a definite conclusion. Furthermore, the NSF-SF revealed the highest tensile strength of 0.32 N/mm and 1.76% elongation at break. Therefore, it is substantiated that the novel bioactive and antibacterial NSF-SF membranes can serve as a potential candidate, shedding light on further in-depth analysis for GTR applications.

Rehardening and the Protective Effect of Gamma-Polyglutamic Acid/Nano-Hydroxyapatite Paste on Surface-Etched Enamel.

Many revolutionary approaches are on the way pertaining to the high occurrence of tooth decay, which is an enduring challenge in the field of preventive dentistry. However, an ideal dental care material has yet to be fully developed. With this aim, this research reports a dramatic enhancement in the rehardening potential of surface-etched enamels through a plausible synergistic effect of the novel combination of γ-polyglutamic acid (γ-PGA) and nano-hydroxyapatite (nano-HAp) paste, within the limitations of the study. The percentage of recovery of the surface microhardness (SMHR%) and the surface parameters for 9 wt% γ-PGA/nano-HAp paste on acid-etched enamel were investigated with a Vickers microhardness tester and an atomic force microscope, respectively. This in vitro study demonstrates that γ-PGA/nano-HAp treatment could increase the SMHR% of etched enamel to 39.59 ± 6.69% in 30 min. To test the hypothesis of the rehardening mechanism and the preventive effect of the γ-PGA/nano-HAp paste, the surface parameters of mean peak spacing (Rsm) and mean arithmetic surface roughness (Ra) were both measured and compared to the specimens subjected to demineralization and/or remineralization. After the treatment of γ-PGA/nano-HAp on the etched surface, the reduction in Rsm from 999 ± 120 nm to 700 ± 80 nm suggests the possible mechanism of void-filling within a short treatment time of 10 min. Furthermore, ΔRa-I, the roughness change due to etching before remineralization, was 23.15 ± 3.23 nm, while ΔRa-II, the roughness change after remineralization, was 11.99 ± 3.90 nm. This statistically significant reduction in roughness change (p < 0.05) implies a protective effect against the demineralization process. The as-developed novel γ-PGA/nano-HAp paste possesses a high efficacy towards tooth microhardness rehardening, and a protective effect against acid etching.

The role of the calmodulin-dependent pathway in static magnetic field-induced mechanotransduction.

While the effects of static magnetic fields (SMFs) on osteoblastic differentiation are well demonstrated, the mechanotransduction pathways of SMFs are still unclear. The aim of this study was to explore the role of calmodulin in the biophysical effects of SMFs on osteoblastic cells. MG63 cells were exposed to a 0.4 T SMF. The expression of phosphodiesterase RNA in the cytoplasm was tested using real-time polymerase chain reaction. The differentiation of the cells was assessed by detecting changes in alkaline phosphatase activity. The role of calmodulin antagonist W-7 was used to evaluate alterations in osteoblastic proliferation and differentiation after the SMF simulations. Our results showed that SMF exposure increased alkaline phosphatase activity and phosphodiesterase 1C gene expression in MG63 cells. Addition of W-7 significantly inhibited the SMF-induced cellular response. We suggest that one possible mechanism by which SMFs affects osteoblastic maturation is through a calmodulin-dependent mechanotransduction pathway.

Hydrothermal Effect on Mechanical Properties of Nephila pilipes Spidroin.

The superlative mechanical properties of spider silk and its conspicuous variations have instigated significant interest over the past few years. However, current attempts to synthetically spin spider silk fibers often yield an inferior physical performance, owing to the improper molecular interactions of silk proteins. Considering this, herein, a post-treatment process to reorganize molecular structures and improve the physical strength of spider silk is reported. The major ampullate dragline silk from Nephila pilipes with a high ß-sheet content and an adequate tensile strength was utilized as the study material, while that from Cyrtophora moluccensis was regarded as a reference. Our results indicated that the hydrothermal post-treatment (50-70 °C) of natural spider silk could effectively induce the alternation of secondary structures (random coil to ß-sheet) and increase the overall tensile strength of the silk. Such advantageous post-treatment strategy when applied to regenerated spider silk also leads to an increment in the strength by ~2.5-3.0 folds, recapitulating ~90% of the strength of native spider silk. Overall, this study provides a facile and effective post-spinning means for enhancing the molecular structures and mechanical properties of as-spun silk threads, both natural and regenerated.

A Silk Fibroin Based Hydration Accelerator for Root Canal Filling Materials.

Mineral trioxide aggregate (MTA) is widely used in various dental endodontic applications such as root-end filling, furcal perforation repair, and vital pulp therapy. In spite of many attempts to improve handling properties and reduce the discoloration of MTA, the ideal root canal filling material has yet to be fully developed. The objective of this study was to investigate the setting time, mechanical properties, and biocompatibility of MTA set by a silk fibroin solution. A 5 wt% silk fibroin (SF) solution (a novel hydration accelerant) was used to set SavDen® MTA and ProRoot® white MTA (WMTA). Changes in setting time, diametral tensile strength (DTS), material crystallization, in vitro cell viability, and cell morphology were assessed by Vicat needle measurement, a universal testing machine, scanning electron microscopy (SEM), and WST-1 assay, respectively. The initial setting time of ProRoot® MTA and SavDen® MTA experienced a drastic decrease of 83.9% and 42.1% when deionized water was replaced by 5 wt% SF solution as the liquid phase. The DTS of SavDen® MTA showed a significant increase after set by the SF solution in 24 h. A human osteoblast-like cell (MG-63)-based WST-1 assay revealed that both ProRoot® MTA and SavDen® MTA hydrated using SF solution did not significantly differ (p > 0.05) in cell viability. MG-63 cells with pseudopodia attachments and nuclear protrusions represent a healthier and more adherent status on the surface of MTA when set with SF solution. The results suggest that the 5 wt% SF solution may be used as an alternative hydration accelerant for MTA in endodontic applications.

The Antibacterial Efficacy and In Vivo Toxicity of Sodium Hypochlorite and Electrolyzed Oxidizing (EO) Water-Based Endodontic Irrigating Solutions.

The objective of this study was to evaluate the antibacterial efficacy against Enterococcus faecalis and Streptococcus mutans and in vivo toxicity using embryonic zebrafish assays of sodium hypochlorite (NaOCl) and electrolyzed oxidizing (EO) water (containing hypochlorous acid (HOCl))-based root canal irrigating solutions. METHODOLOGY: Using 100 µL microbial count of 1 × 108 cfu/mL Enterococcus faecalis to mix with each 10 mL specimen of NaOCl or HOCl for designed time periods. The above protocol was also repeated for Streptococcus mutans. The concentration of viable microorganisms was estimated based on each standardized inoculum using a plate-count method. Zebrafish embryo assays were used to evaluate acute toxicity. RESULTS: All the HOCl or NaOCl treatment groups showed > 99.9% antibacterial efficacy against Enterococcus faecalis and Streptococcus mutans. Zebrafish embryos showed almost complete dissolution in 1.5% NaOCl within 5 min. Both survival rates after being treated with 0.0125% and 0.0250% HOCl for 0.5 min or 1.0 min were similar to that of E3 medium. CONCLUSIONS: Both NaOCl and HOCl revealed similar antibacterial efficacy (> 99.9%) against Enterococcus faecalis and Streptococcus mutans. While 1.5% NaOCl fully dissolved the Zebrafish embryos, both 0.0125% and 0.0250% HOCl showed little in vivo toxicity, affirming its potential as an alternative irrigation solution for vital pulp therapy.