The Clinical Utility of Two High-Throughput 16S rRNA Gene Sequencing Workflows for Taxonomic Assignment of Unidentifiable Bacterial Pathogens in Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry.

Bacterial pathogens that cannot be identified using matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) are occasionally encountered in clinical laboratories. The 16S rRNA gene is often used for sequence-based analysis to identify these bacterial species. Nevertheless, traditional Sanger sequencing is laborious, time-consuming, and low throughput. Here, we compared two commercially available 16S rRNA gene sequencing tests that are based on Illumina and Nanopore sequencing technologies, respectively, in their ability to identify the species of 172 clinical isolates that failed to be identified by MALDI-TOF MS. Sequencing data were analyzed by the respective built-in programs (MiSeq Reporter software of Illumina and Epi2me of Nanopore) and BLAST+ (v2.11.0). Their agreement with Sanger sequencing on species-level identification was determined. Discrepancies were resolved by whole-genome sequencing. The diagnostic accuracy of each workflow was determined using the composite sequencing result as the reference standard. Despite the high base-calling accuracy of Illumina sequencing, we demonstrated that the Nanopore workflow had a higher taxonomic resolution at the species level. Using built-in analysis algorithms, the concordance of Sanger 16S with the Illumina and Nanopore workflows was 33.14% and 87.79%, respectively. The agreement was 65.70% and 83.14%, respectively, when BLAST+ was used for analysis. Compared with the reference standard, the diagnostic accuracy of Nanopore 16S was 96.36%, which was identical to that of Sanger 16S and better than that of Illumina 16S (69.07%). The turnaround time of the Illumina workflow and the Nanopore workflow was 78 h and 8.25 h, respectively. The per-sample cost of the Illumina and Nanopore workflows was US$28.5 and US$17.7, respectively.

Territorywide Study of Early Coronavirus Disease Outbreak, Hong Kong, China.

Initial cases of coronavirus disease in Hong Kong were imported from mainland China. A dramatic increase in case numbers was seen in February 2020. Most case-patients had no recent travel history, suggesting the presence of transmission chains in the local community. We collected demographic, clinical, and epidemiologic data from 50 patients, who accounted for 53.8% of total reported case-patients as of February 28, 2020. We performed whole-genome sequencing to determine phylogenetic relationship and transmission dynamics of severe acute respiratory syndrome coronavirus 2 infections. By using phylogenetic analysis, we attributed the community outbreak to 2 lineages; 1 harbored a common mutation, Orf3a-G251V, and accounted for 88.0% of the cases in our study. The estimated time to the most recent common ancestor of local coronavirus disease outbreak was December 24, 2019, with an evolutionary rate of 3.04 × 10-3 substitutions/site/year. The reproduction number was 1.84, indicating ongoing community spread.

Transmission Patterns of Co-Circulation of Omicron Sub-Lineages in Hong Kong SAR, China, a City with Rigorous Social Distancing Measures, in 2022.

OBJECTIVE: This study aimed to characterize the changing landscape of circulating SARS-CoV-2 lineages in the local community of Hong Kong throughout 2022. We examined how adjustments to quarantine arrangements influenced the transmission pattern of Omicron variants in a city with relatively rigorous social distancing measures at that time. METHODS: In 2022, a total of 4684 local SARS-CoV-2 genomes were sequenced using the Oxford Nanopore GridION sequencer. SARS-CoV-2 consensus genomes were generated by MAFFT, and the maximum likelihood phylogeny of these genomes was determined using IQ-TREE. The dynamic changes in lineages were depicted in a time tree created by Nextstrain. Statistical analysis was conducted to assess the correlation between changes in the number of lineages and adjustments to quarantine arrangements. RESULTS: By the end of 2022, a total of 83 SARS-CoV-2 lineages were identified in the community. The increase in the number of new lineages was significantly associated with the relaxation of quarantine arrangements (One-way ANOVA, F(5, 47) = 18.233, p < 0.001)). Over time, Omicron BA.5 sub-lineages replaced BA.2.2 and became the predominant Omicron variants in Hong Kong. The influx of new lineages reshaped the dynamics of Omicron variants in the community without fluctuating the death rate and hospitalization rate (One-way ANOVA, F(5, 47) = 2.037, p = 0.091). CONCLUSION: This study revealed that even with an extended mandatory quarantine period for incoming travelers, it may not be feasible to completely prevent the introduction and subsequent community spread of highly contagious Omicron variants. Ongoing molecular surveillance of COVID-19 remains essential to monitor the emergence of new recombinant variants.

The clinical utility of Nanopore 16S rRNA gene sequencing for direct bacterial identification in normally sterile body fluids.

The prolonged incubation period of traditional culture methods leads to a delay in diagnosing invasive infections. Nanopore 16S rRNA gene sequencing (Nanopore 16S) offers a potential rapid diagnostic approach for directly identifying bacteria in infected body fluids. To evaluate the clinical utility of Nanopore 16S, we conducted a study involving the collection and sequencing of 128 monomicrobial samples, 65 polymicrobial samples, and 20 culture-negative body fluids. To minimize classification bias, taxonomic classification was performed using 3 analysis pipelines: Epi2me, Emu, and NanoCLUST. The result was compared to the culture references. The limit of detection of Nanopore 16S was also determined using simulated bacteremic blood samples. Among the three classifiers, Emu demonstrated the highest concordance with the culture results. It correctly identified the taxon of 125 (97.7%) of the 128 monomicrobial samples, compared to 109 (85.2%) for Epi2me and 102 (79.7%) for NanoCLUST. For the 230 cultured species in the 65 polymicrobial samples, Emu correctly identified 188 (81.7%) cultured species, compared to 174 (75.7%) for Epi2me and 125 (54.3%) for NanoCLUST. Through ROC analysis on the monomicrobial samples, we determined a threshold of relative abundance at 0.058 for distinguishing potential pathogens from background in Nanopore 16S. Applying this threshold resulted in the identification of 107 (83.6%), 117 (91.4%), and 114 (91.2%) correctly detected samples for Epi2me, Emu, and NanoCLUST, respectively, in the monomicrobial samples. Nanopore 16S coupled with Epi2me could provide preliminary results within 6 h. However, the ROC analysis of polymicrobial samples exhibited a random-like performance, making it difficult to establish a threshold. The overall limit of detection for Nanopore 16S was found to be about 90 CFU/ml.

A low-cost TaqMan minor groove binder probe-based one-step RT-qPCR assay for rapid identification of N501Y variants of SARS-CoV-2.

The increasing prevalence of N501Y variants of SARS-CoV-2 has kindled global concern due to their enhanced transmissibility. Genome sequencing is the gold standard method to identify the emerging variants of concern. But it is time-consuming and expensive, limiting the widespread deployment of genome surveillance in some countries. Health authorities surge the development of alternative assay to expand screening capacity with reduced time and cost. In this study, we developed an in-house TaqMan minor groove binder (MGB) probe-based one-step RT-qPCR assay to detect the presence of N501Y mutation in SARS-CoV-2. A total of 168 SARS-CoV-2 positive respiratory specimens were collected to determine diagnostic accuracy of the RT-qPCR assay. As a reference standard, PANGO lineages and the mutation patterns of all samples were characterised by whole-genome sequencing. The analytical sensitivity and the ability of the assay to detect low frequency of N501Y variants were also evaluated. A total of 31 PANGO lineages were identified from 168 SARS-CoV-2 positive cases, in which 34 samples belonged to N501Y variants, including B.1.1.7 (n = 20), B.1.351 (n = 12) and P.3 (n = 2). The N501Y RT-qPCR correctly identified all 34 samples as N501Y-positive and the other 134 samples as wildtype. The limit-of-detection of the assay consistently achieved 1.5 copies/µL on four different qPCR platforms. N501Y mutation was successfully detected at an allele frequency as low as 10 % in a sample with mixed SARS-CoV-2 lineage. The N501Y RT-qPCR is simple and inexpensive (US$1.6 per sample). It enables robust high-throughput screening for surveillance of SARS-CoV-2 variants of concern harbouring N501Y mutation.

The use of high-resolution melting analysis for rapid spa typing on methicillin-resistant Staphylococcus aureus clinical isolates.

Methicillin-resistant Staphylococcus aureus (MRSA) has been endemic in Hong Kong for three decades. This study evaluated the practical use of high-resolution melting (HRM) real-time PCR analysis on MRSA staphylococcal Protein A (spa) typing on local MRSA isolates. Among 55 clinical MRSA isolates collected in 2011, 12 different spa types were observed by the conventional PCR-sequencing method including the locally predominant spa type t1081 and two locally predominant community acquired MRSA spa types t019 and t437. By using the HRM method, it could differentiate all 12 spa genotypes by distinct melting curves and HRM difference plot analysis. These two methods demonstrated 100% concordance whereas the HRM method required only 3h of turnaround time and one-fifth of reagent cost compared to the conventional method. Our study confirmed that the cost effective and rapid HRM typing approach is practically useful for MRSA community transmission monitoring and nosocomial outbreak control in Hong Kong.