RESUMEN
The gastrointestinal tract is inhabited by a vast community of microorganisms, termed the gut microbiota. Large colonies can pose a health threat, but the gastrointestinal mucus system protects epithelial cells from microbiota invasion. The human colon features a bilayer of mucus lining. Due to imbalances in intestinal homeostasis, bacteria may successfully penetrate the inner mucus layer, which can lead to severe gut diseases. However, it is hard to tease apart the competing mechanisms that lead to this penetration. To probe the conditions that permit bacteria penetration into the inner mucus layer, we develop an agent-based model consisting of bacteria and an inner mucus layer subject to a constant flux of nutrient fields feeding the bacteria. We find that there are three important variables that determine bacterial invasion: the bacterial reproduction rate, the contact energy between bacteria and mucus, and the rate of bacteria degrading the mucus. Under healthy conditions, all bacteria are naturally eliminated by the constant removal of mucus. In diseased states, imbalances between the rates of bacterial degradation and mucus secretion lead to bacterial invasion at certain junctures. We conduct uncertainty quantification and sensitivity analysis to compare the relative impact between these parameters. The contact energy has the strongest influence on bacterial penetration, which, in combination with bacterial degradation rate and growth rate, greatly accelerates bacterial invasion of the human gut mucus lining. Our findings will serve as predictive indicators for the etiology of intestinal diseases and highlight important considerations when developing gut therapeutics.
Asunto(s)
Colon , Modelos Biológicos , Moco , Humanos , Colon/microbiología , Moco/metabolismo , Moco/microbiología , Bacterias/metabolismo , Microbioma GastrointestinalRESUMEN
Materials are more easily damaged during accidents that involve rapid deformation. Here, a design strategy is described for electronic materials comprised of conducting polymers that defies this orthodox property, making their extensibility and toughness dynamically adaptive to deformation rates. This counterintuitive property is achieved through a morphology of interconnected nanoscopic core-shell micelles, where the chemical interactions are stronger within the shells than the cores. As a result, the interlinked shells retain material integrity under strain, while the rate of dissociation of the cores controls the extent of micelle elongation, which is a process that adapts to deformation rates. A prototype based on polyaniline shows a 7.5-fold increase in ultimate elongation and a 163-fold increase in toughness when deformed at increasing rates from 2.5 to 10 000% min-1 . This concept can be generalized to other conducting polymers and highly conductive composites to create "self-protective" soft electronic materials with enhanced durability under dynamic movement or deformation.
RESUMEN
Foaming effect strongly impacts the physical and mechanical properties of foam glass materials, but an understanding of its mechanism especially at the molecular level is still limited. In this study, the foaming effects of dextrin, a mixture of dextrin and carbon, and different carbon allotropes are investigated with respect to surface morphology as well as physical and mechanical properties, in which 1 wt.% carbon black is identified as an optimal choice for a well-balanced material property. More importantly, the different foaming effects are elucidated by all-atomistic molecular dynamics simulations with molecular-level insights into the structure-property relationships. The results show that smaller pores and more uniform pore structure benefit the mechanical properties of the foam glass samples. The foam glass samples show excellent chemical and thermal stability with 1 wt.% carbon as the foaming agent. Furthermore, the foaming effects of CaSO4 and Na2HPO4 are investigated, which both create more uniform pore structures. This work may inspire more systematic approaches to control foaming effect for customized engineering needs by establishing molecular-level structure-property-process relationships, thereby, leading to efficient production of foam glass materials with desired foaming effects.
RESUMEN
Birefringent hydrogels have a strong potential for applications in biomedicine and optics as they can modulate the optical and mechanical anisotropy in confined two-dimensional geometries. However, production of birefringent hydrogels with hierarchical structures, mechanical properties, and biorelated behavior that are analogous to biological tissues is still challenging. Starting from the silk fibroin (SF)-ionic liquid solution system, this study aimed to rationally design a "binary solvent-exchange-induced self-assembly (BSEISA)" strategy to produce birefringent SF hydrogels (SFHs). In this method, the conformational transition rate of SF can be effectively controlled by the exchange rate of the binary solvents. Therefore, this method provides the possibility of controlling the conformation and orientation of SF. Molecular simulations confirmed that methanol is more effective in driving ß-sheet formation than other often used solvents, such as formic acid and water. The formed ß-sheets act as the physical cross-links that connect disparate protein chains, thereby forming continuous and stable three-dimensional (3D) hydrogel networks. The resultant BSEISA-SFHs are transparent and birefringent with mechanical characteristics similar to those of soft biological tissues, such as lens and cartilage. Interestingly, our results revealed that the evolution of experimental birefringent fringes perfectly matched the changes in stress distribution predicted using finite element analysis. Owing to the unique birefringence of BSEISA-SFHs, together with the advantages in mechanical performance, these hydrogels are anticipated to act as good tissue surrogates for understanding the mechanical response of biological tissues.
Asunto(s)
Fibroínas , Birrefringencia , Cartílago , Hidrogeles , Seda , SolventesRESUMEN
Hydrogels have been the focus of extensive research due to their potential use in fields including biomedical, pharmaceutical, biosensors, and cosmetics. However, the general weak mechanical properties of hydrogels limit their utility. Here, we generate pristine silk fibroin (SF) hydrogels with excellent mechanical properties via a binary solvent induced conformation transition (BSICT) strategy. In this method, the conformational transition of SF is regulated by moderate binary solvent diffusion and SF/solvent interactions. ß-sheet formation serves as the physical crosslinks that connect disparate protein chains to form continuous 3D hydrogel networks, avoiding complex chemical and/or physical treatments. The Young's modulus of these new BSICT-silk fibroin hydrogels can reach up to 6.5±0.2 MPa, tens to hundreds of times higher than that of conventional hydrogels (0.01-0.1 MPa). These new materials filled the "empty soft materials space" in the elastic modulus/strain Ashby plot. More remarkably, the BSICT-SF hydrogels can be processed into different constructions through different polymer and/or metal based processing techniques, such as molding, laser cutting, and machining. Thus, these new hydrogel systems exhibit potential utility in many biomedical and engineering fields.
RESUMEN
We investigate the effect of varying carbon nanotube (CNT) size on the desalination performance through slit confinements formed by horizontally aligned CNTs stacked on top of one another. By increasing the CNT size, the results obtained from this study indicate a corresponding increase in the water flow rate, accompanied by a slight reduction in salt rejection performance. However, due to the increase in the membrane area with CNT size, the permeability performance is observed to reduce as the CNT size increases. Nevertheless, a comparison with nanoporous 2D membranes shows that the permeability of an outer-wall CNT slit membrane remains significantly higher for all CNT sizes considered. This indicates that precise dimensions of the CNTs are not highly crucial for achieving ultra-high permeability performance in such membranes, as long as the critical slit size is maintained. In-depth analytical studies were further conducted to correlate the influence of curvature effects due to increasing CNT size on the flow characteristcis of the outer-wall CNT membrane. These include the analysis of the measured velocity profiles, oxygen density mapping, potential of mean force profile and friction profile. The present numerical results demonstrate the superb desalination performance of the outer-wall CNT slit membrane, regardless of the size of CNTs used. In addition, an extensive analysis conducted provides detailed characterization of how the curvature affects flow across outer-wall CNTs, and can be used to guide future design and fabrication for experimental testing.
RESUMEN
In the 50 years that succeeded Richard Feynman's exposition of the idea that there is "plenty of room at the bottom" for manipulating individual atoms for the synthesis and manufacturing processing of materials, the materials-by-design paradigm is being developed gradually through synergistic integration of experimental material synthesis and characterization with predictive computational modeling and optimization. This paper reviews how this paradigm creates the possibility to develop materials according to specific, rational designs from the molecular to the macroscopic scale. We discuss promising techniques in experimental small-scale material synthesis and large-scale fabrication methods to manipulate atomistic or macroscale structures, which can be designed by computational modeling. These include recombinant protein technology to produce peptides and proteins with tailored sequences encoded by recombinant DNA, self-assembly processes induced by conformational transition of proteins, additive manufacturing for designing complex structures, and qualitative and quantitative characterization of materials at different length scales. We describe important material characterization techniques using numerous methods of spectroscopy and microscopy. We detail numerous multi-scale computational modeling techniques that complements these experimental techniques: DFT at the atomistic scale; fully atomistic and coarse-grain molecular dynamics at the molecular to mesoscale; continuum modeling at the macroscale. Additionally, we present case studies that utilize experimental and computational approaches in an integrated manner to broaden our understanding of the properties of two-dimensional materials and materials based on silk and silk-elastin-like proteins.
RESUMEN
The gastrointestinal (GI) tract's mucus layer serves as a critical barrier and a mediator in drug nanoparticle delivery. The mucus layer's diverse molecular structures and spatial complexity complicates the mechanistic study of the diffusion dynamics of particulate materials. In response, we developed a bi-component coarse-grained mucus model, specifically tailored for the colorectal cancer environment, that contained the two most abundant glycoproteins in GI mucus: Muc2 and Muc5AC. This model demonstrated the effects of molecular composition and concentration on mucus pore size, a key determinant in the permeability of nanoparticles. Using this computational model, we investigated the diffusion rate of polyethylene glycol (PEG) coated nanoparticles, a widely used muco-penetrating nanoparticle. We validated our model with experimentally characterized mucus pore sizes and the diffusional coefficients of PEG-coated nanoparticles in the mucus collected from cultured human colorectal goblet cells. Machine learning fingerprints were then employed to provide a mechanistic understanding of nanoparticle diffusional behavior. We found that larger nanoparticles tended to be trapped in mucus over longer durations but exhibited more ballistic diffusion over shorter time spans. Through these discoveries, our model provides a promising platform to study pharmacokinetics in the GI mucus layer.
Asunto(s)
Moco , Nanopartículas , Polietilenglicoles , Humanos , Nanopartículas/química , Difusión , Polietilenglicoles/química , Moco/metabolismo , Moco/química , Mucina 2/metabolismo , Mucina 2/química , Mucina 5AC/metabolismo , Mucina 5AC/química , Mucosa Intestinal/metabolismo , Tracto Gastrointestinal/metabolismo , Células Caliciformes/metabolismo , Modelos BiológicosRESUMEN
Protein hydrogels with tailored stimuli-responsive features and tunable stiffness have garnered considerable attention due to the growing demand for biomedical soft robotics. However, integrating multiple responsive features toward intelligent yet biocompatible actuators remains challenging. Here, we report a facile approach that synergistically combines genetic and chemical engineering for the design of protein hydrogel actuators with programable complex spatial deformation. Genetically engineered silk-elastin-like proteins (SELPs) were encoded with stimuli-responsive motifs and enzymatic crosslinking sites via simulation-guided genetic engineering strategies. Chemical modifications of the recombinant proteins were also used as secondary control points to tailor material properties, responsive features, and anisotropy in SELP hydrogels. As a proof-of-concept example, diazonium coupling chemistry was exploited to incorporate sulfanilic acid groups onto the tyrosine residues in the elastin domains of SELPs to achieve patterned SELP hydrogels. These hydrogels can be programmed to perform various actuations, including controllable bending, buckling, and complex deformation under external stimuli, such as temperature, ionic strength, or pH. With the inspiration of genetic and chemical engineering in natural organisms, this work offers a predictable, tunable, and environmentally sustainable approach for the fabrication of programmed intelligent soft actuators, with implications for a variety of biomedical materials and bio-robotics needs. This article is protected by copyright. All rights reserved.
RESUMEN
Chemical permeation enhancers (CPEs) represent a prevalent and safe strategy to enable noninvasive drug delivery across skin-like biological barriers such as the tympanic membrane (TM). While most existing CPEs interact strongly with the lipid bilayers in the stratum corneum to create defects as diffusion paths, their interactions with the delivery system, such as polymers forming a hydrogel, can compromise gelation, formulation stability, and drug diffusion. To overcome this challenge, differing interactions between CPEs and the hydrogel system are explored, especially those with sodium dodecyl sulfate (SDS), an ionic surfactant and a common CPE, and those with methyl laurate (ML), a nonionic counterpart with a similar length alkyl chain. Notably, the use of ML effectively decouples permeation enhancement from gelation, enabling sustained delivery across TMs to treat acute otitis media (AOM), which is not possible with the use of SDS. Ciprofloxacin and ML are shown to form a pseudo-surfactant that significantly boosts transtympanic permeation. The middle ear ciprofloxacin concentration is increased by 70-fold in vivo in a chinchilla AOM model, yielding superior efficacy and biocompatibility than the previous highest-performing formulation. Beyond improved efficacy and biocompatibility, this single-CPE formulation significantly accelerates its progression toward clinical deployment.
Asunto(s)
Antibacterianos , Chinchilla , Ciprofloxacina , Otitis Media , Tensoactivos , Membrana Timpánica , Animales , Otitis Media/tratamiento farmacológico , Antibacterianos/química , Antibacterianos/farmacología , Antibacterianos/farmacocinética , Antibacterianos/administración & dosificación , Tensoactivos/química , Membrana Timpánica/efectos de los fármacos , Ciprofloxacina/química , Ciprofloxacina/farmacología , Ciprofloxacina/farmacocinética , Ciprofloxacina/administración & dosificación , Sistemas de Liberación de Medicamentos/métodos , Hidrogeles/química , Dodecil Sulfato de Sodio/química , PermeabilidadRESUMEN
Biofilms pose significant problems for engineers in diverse fields, such as marine science, bioenergy, and biomedicine, where effective biofilm control is a long-term goal. The adhesion and surface mechanics of biofilms play crucial roles in generating and removing biofilm. Designing customized nanosurfaces with different surface topologies can alter the adhesive properties to remove biofilms more easily and greatly improve long-term biofilm control. To rapidly design such topologies, we employ individual-based modeling and Bayesian optimization to automate the design process and generate different active surfaces for effective biofilm removal. Our framework successfully generated optimized functional nanosurfaces for improved biofilm removal through applied shear and vibration. Densely distributed short pillar topography is the optimal geometry to prevent biofilm formation. Under fluidic shearing, the optimal topography is to sparsely distribute tall, slim, pillar-like structures. When subjected to either vertical or lateral vibrations, thick trapezoidal cones are found to be optimal. Optimizing the vibrational loading indicates a small vibration magnitude with relatively low frequencies is more efficient in removing biofilm. Our results provide insights into various engineering fields that require surface-mediated biofilm control. Our framework can also be applied to more general materials design and optimization.
Asunto(s)
Antiinfecciosos , Adhesión Bacteriana , Teorema de Bayes , BiopelículasRESUMEN
Biofilm growth and transport in confined systems frequently occur in natural and engineered systems. Designing customizable engineered porous materials for controllable biofilm transportation properties could significantly improve the rapid utilization of biofilms as engineered living materials for applications in pollution alleviation, material self-healing, energy production, and many more. We combine Bayesian optimization (BO) and individual-based modeling to conduct design optimizations for maximizing different porous materials' (PM) biofilm transportation capability. We first characterize the acquisition function in BO for designing 2-dimensional porous membranes. We use the expected improvement acquisition function for designing lattice metamaterials (LM) and 3-dimensional porous media (3DPM). We find that BO is 92.89% more efficient than the uniform grid search method for LM and 223.04% more efficient for 3DPM. For all three types of structures, the selected characterization simulation tests are in good agreement with the design spaces approximated with Gaussian process regression. All the extracted optimal designs exhibit better biofilm growth and transportability than unconfined space without substrates. Our comparison study shows that PM stimulates biofilm growth by taking up volumetric space and pushing biofilms' upward growth, as evidenced by a 20% increase in bacteria cell numbers in unconfined space compared to porous materials, and 128% more bacteria cells in the target growth region for PM-induced biofilm growth compared with unconfined growth. Our work provides deeper insights into the design of substrates to tune biofilm growth, analyzing the optimization process and characterizing the design space, and understanding biophysical mechanisms governing the growth of biofilms.
Asunto(s)
Biopelículas , Porosidad , Teorema de Bayes , Simulación por ComputadorRESUMEN
Due to their remarkable mechanical and chemical properties, Ti-Al-based materials are attracting considerable interest in numerous fields of engineering, such as automotive, aerospace, and defense. With their low density, high strength, and resistance to corrosion and oxidation, these intermetallic alloys and metal-compound composites have found diverse applications. However, additive manufacturing and heat treatment of Ti-Al alloys frequently lead to brittleness and severe formation of defects. The present study delves into the interfacial dynamics of these Ti-Al systems, particularly focusing on the behavior of Ti and Al atoms in the presence of TiAl3 grain boundaries under experimental heat treatment conditions. Using a combination of molecular dynamics and Markov state modeling, we scrutinize the kinetic processes involved in the formation of TiAl3. The molecular dynamics simulation indicates that at the early stage of heat treatment, the predominating process is the diffusion of Al atoms toward the Ti surface through the TiAl3 grain boundaries. Markov state modeling identifies three distinct dynamic states of Al atoms within the Ti/Al mixture that forms during the process, each exhibiting a unique spatial distribution. Using transition time scales as a qualitative measure of the rapidness of the dynamics, it is observed that the Al dynamics is significantly less rapid near the Ti surface compared to the Al surface. Put together, the results offer a comprehensive understanding of the interfacial dynamics and reveal a three-stage diffusion mechanism. The process initiates with the premelting of Al, proceeds with the prevalent diffusion of Al atoms toward the Ti surface, and eventually ceases as the Ti concentration within the mixture progressively increases. The insights gained from this study could contribute significantly to the control and optimization of manufacturing processes for these high-performing Ti-Al-based materials.
RESUMEN
The dearth of knowledge on the diverse structures and functions in bacterial collagen-like proteins is in stark contrast to the deep grasp of structures and functions in mammalian collagen, the ubiquitous triple-helical scleroprotein that plays a central role in tissue architecture, extracellular matrix organization, and signal transduction. To fill and highlight existing gaps due to the general paucity of data on bacterial CLPs, we comprehensively reviewed the latest insight into their functional and structural diversity from multiple perspectives of biology, computational simulations, and materials engineering. The origins and discovery of bacterial CLPs were explored. Their genetic distribution and molecular architecture were analyzed, and their structural and functional diversity in various bacterial genera was examined. The principal roles of computational techniques in understanding bacterial CLPs' structural stability, mechanical properties, and biological functions were also considered. This review serves to drive further interest and development of bacterial CLPs, not only for addressing fundamental biological problems in collagen but also for engineering novel biomaterials. Hence, both biology and materials communities will greatly benefit from intensified research into the diverse structures and functions in bacterial collagen-like proteins.
Asunto(s)
Proteínas Bacterianas , Colágeno , Animales , Proteínas Bacterianas/genética , Proteínas Bacterianas/química , Colágeno/metabolismo , Materiales Biocompatibles , Mamíferos/metabolismoRESUMEN
The ability to fabricate anisotropic collagenous materials rapidly and reproducibly has remained elusive despite decades of research. Balancing the natural propensity of monomeric collagen (COL) to spontaneously polymerize in vitro with the mild processing conditions needed to maintain its native substructure upon polymerization introduces challenges that are not easily amenable with off-the-shelf instrumentation. To overcome these challenges, we have designed a platform that simultaneously aligns type I COL fibrils under mild shear flow and builds up the material through layer-by-layer assembly. We explored the mechanisms propagating fibril alignment, targeting experimental variables such as shear rate, viscosity, and time. Coarse-grained molecular dynamics simulations were also employed to help understand how initial reaction conditions including chain length, indicative of initial polymerization, and chain density, indicative of concentration, in the reaction environment impact fibril growth and alignment. When taken together, the mechanistic insights gleaned from these studies inspired the design, iteration, fabrication, and then customization of the fibrous collagenous materials, illustrating a platform material that can be readily adapted to future tissue engineering applications.
Asunto(s)
Colágeno , Colágenos Fibrilares , Ingeniería de Tejidos , Colágeno Tipo IRESUMEN
A transition from a linear to a circular economy is the only alternative to reduce current pressures in natural resources. Our society must redefine our material sources, rethink our supply chains, improve our waste management, and redesign materials and products. Valorizing extensively available biomass wastes, as new carbon mines, and developing biobased materials that mimic nature's efficiency and wasteless procedures are the most promising avenues to achieve technical solutions for the global challenges ahead. Advances in materials processing, and characterization, as well as the rise of artificial intelligence, and machine learning, are supporting this transition to a new materials' mining. Location, cultural, and social aspects are also factors to consider. This perspective discusses new alternatives for carbon mining in biomass wastes, the valorization of biomass using available processing techniques, and the implementation of computational modeling, artificial intelligence, and machine learning to accelerate material's development and process engineering.
RESUMEN
Positioned within the eye, the lens supports vision by transmitting and focusing light onto the retina. As an adaptive glassy material, the lens is constituted primarily by densely-packed, polydisperse crystallin proteins that organize to resist aggregation and crystallization at high volume fractions, yet the details of how crystallins coordinate with one another to template and maintain this transparent microstructure remain unclear. The role of individual crystallin subtypes (α, ß, and γ) and paired subtype compositions, including how they experience and resist crowding-induced turbidity in solution, is explored using combinations of spectrophotometry, hard-sphere simulations, and surface pressure measurements. After assaying crystallin combinations, ß-crystallins emerged as a principal component in all mixtures that enabled dense fluid-like packing and short-range order necessary for transparency. These findings helped inform the design of lens-like hydrogel systems, which are used to monitor and manipulate the loss of transparency under different crowding conditions. When taken together, the findings illustrate the design and characterization of adaptive materials made from lens proteins that can be used to better understand mechanisms regulating transparency.
Asunto(s)
Cristalinas , Cristalino , Animales , Cristalinas/análisis , Cristalinas/química , Cristalinas/metabolismo , Cristalino/metabolismo , VertebradosRESUMEN
Lithium-sulfur batteries represent an attractive option for energy storage applications. A deeper understanding of the multistep lithium-sulfur reactions and the electrocatalytic mechanisms are required to develop advanced, high-performance batteries. We have systematically investigated the lithium-sulfur redox processes catalyzed by a cobalt single-atom electrocatalyst (Co-SAs/NC) via operando confocal Raman microscopy and x-ray absorption spectroscopy (XAS). The real-time observations, based on potentiostatic measurements, indicate that Co-SAs/NC efficiently accelerates the lithium-sulfur reduction/oxidation reactions, which display zero-order kinetics. Under galvanostatic discharge conditions, the typical stepwise mechanism of long-chain and intermediate-chain polysulfides is transformed to a concurrent pathway under electrocatalysis. In addition, operando cobalt K-edge XAS studies elucidate the potential-dependent evolution of cobalt's oxidation state and the formation of cobalt-sulfur bonds. Our work provides fundamental insights into the mechanisms of catalyzed lithium-sulfur reactions via operando methods, enabling a deeper understanding of electrocatalysis and interfacial dynamics in electrical energy storage systems.
RESUMEN
Silk-elastin-like protein (SELP) is an excellent biocompatible and biodegradable material for hydrogels with tunable properties that can respond to multiple external stimuli. By integrating fully atomistic, replica exchange molecular dynamics simulations with detailed experiments, we predict and measure structural responses to changes in temperature and ion concentration of a novel SELP sequence, as well as a diazonium-coupled version. A single SELP molecule shrinks at high temperatures, whereas diazonium coupling decreases this thermo-responsiveness. Diazonium coupling weakens electrostatic interactions, leading to an insignificant ionic response in the single chain, while also decreasing gelation rates by reducing the number of exposed dityrosine crosslink sites and their solvent-accessible surface areas. With further data from our coarse-grained crosslinked SELP model and our experiments, we find that three effects are critical for SELP cluster's physical response to external stimuli: (1) the structural transition of SELPs at high temperature, (2) the geometry restraints in hydrogel networks, and (3) the electrostatic interactions between molecules. This molecular understanding of the thermal and ion response in single molecules of SELPs and their crosslinked networks may further improve and help innovate SELP's stimuli-responsive properties, creating significant opportunities for applications in biomedical devices and other engineering applications.
Asunto(s)
Elastina , Seda , Secuencia de Aminoácidos , Elastina/química , Hidrogeles/química , Seda/químicaRESUMEN
Some of the most abundant biomass on earth is sequestered in fibrous biopolymers like cellulose, chitin, and silk. These types of natural materials offer unique and striking mechanical and functional features that have driven strong interest in their utility for a range of applications, while also matching environmental sustainability needs. However, these material systems are challenging to process in cost-competitive ways to compete with synthetic plastics due to the limited options for thermal processing. This results in the dominance of solution-based processing for fibrous biopolymers, which presents challenges for scaling, cost, and consistency in outcomes. However, new opportunities to utilize thermal processing with these types of biopolymers, as well as fibrillation approaches, can drive renewed opportunities to bridge this gap between synthetic plastic processing and fibrous biopolymers, while also holding sustainability goals as critical to long-term successful outcomes.