Removal and reduction mechanism of Cr (VI) in Leersia hexandra Swartz constructed wetland-microbial fuel cell coupling system.

Cr (VI) is extremely harmful to both the environment and human health, and it can linger in the environment for a very long period. In this research, the Leersia hexandra Swartz constructed wetland-microbial fuel cell (CW-MFC) system was constructed to purify Cr (VI) wastewater. By comparing with the constructed wetland (CW) system, the system electricity generation, pollutants removal, Cr enrichment, and morphological transformation of the system were discussed. The results demonstrated that the L. hexandra CW-MFC system promoted removal of pollutants and production of electricity of the system. The maximum voltage of the system was 499 mV, the COD and Cr (VI) removal efficiency was 93.73% and 97.00%. At the same time, it enhanced the substrate and L. hexandra ability to absorb Cr and change it morphologically transformation. Additionally, the results of XPS and XANES showed that the majority of the Cr in the L. hexandra and substrate was present as Cr (III). In the L. hexandra CW-MFC system, Geobacter also functioned as the primary metal catabolic reducing and electrogenic bacteria. As a result, L. hexandra CW-MFC system possesses the added benefit of removing Cr (VI) while producing energy compared to the traditional CW system.

Peroxymonosulfate activation by CuMn-LDH for the degradation of bisphenol A: Effect, mechanism, and pathway.

The remediation of water contaminated with bisphenol A (BPA) has gained significant attention. In this study, a hydrothermal composite activator of Cu3Mn-LDH containing coexisting phases of cupric nitrate (Cu(NO3)2) and manganous nitrate (Mn(NO3)2) was synthesized. Advanced oxidation processes were employed as an effective approach for BPA degradation, utilizing Cu3Mn-LDH as the catalyst to activate peroxymonosulfate (PMS). The synthesis of the Cu3Mn-LDH material was characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). According to the characterization data and screening experiments, Cu3Mn-LDH was selected as the best experimental material. Cu3Mn-LDH exhibits remarkable catalytic ability with PMS, demonstrating good degradation efficiency of BPA under neutral and alkaline conditions. With a PMS dosage of 0.25 g·L-1 and Cu3Mn-LDH dosage of 0.10 g·L-1, 10 mg·L-1 BPA (approximately 17.5 µM) can be completely degraded within 40 min, of which the TOC removal reached 95%. The reactive oxygen species present in the reaction system were analyzed by quenching experiments and EPR. Results showed that sulfate free radicals (SO4•-), hydroxyl free radicals (•OH), superoxide free radicals (•O2-), and nonfree radical mono-oxygen were generated, while mono-oxygen played a key role in degrading BPA. Cu3Mn-LDH exhibits excellent reproducibility, as it can still completely degrade BPA even after four consecutive cycles. The degradation intermediates of BPA were detected by GCMS, and the possible degradation pathways were reasonably predicted. This experiment proposes a nonradical degradation mechanism for BPA and analyzes the degradation pathways. It provides a new perspective for the treatment of organic pollutants in water.

Compost-derived humic and fulvic acid coupling with Shewanella oneidensis MR-1 for the bioreduction of Cr(â ¥).

The compost-derived humic acids (HA) and fulvic acids (FA) contain abundant active functional groups with strong redox capacity, which can function as an electron shuttles for promoting the reduction of heavy metals, thus changing the form of the pollutants in the environment and reducing their toxicity. Therefore, in this study, UV-Vis, FTIR, 3D-EEM, electrochemical analysis were applied to study the spectral characteristics and electron transfer capacity (ETC) of HA and FA. Upon analysis, the results showed an increasing trend of ETC and humification degree (SUVA254) for both HA and FA during composting. However, the aromatic degree (SUVA280) of HA was higher than FA. After 7 days of culture, 37.95% of Cr (Ⅵ) was reduced by Shewanella oneidensis MR-1 (MR-1) alone. Whereas, only if HA or FA existed, the diminution of Cr (Ⅵ) reached 37.43% and 40.55%, respectively. However, the removal rate of Cr (Ⅵ) by HA/MR-1 and FA/MR-1 increased to 95.82% and 93.84% respectively. It indicated that HA and FA acted as electron shuttles, mediating the transfer of electrons between MR-1 and the final electron acceptor, effectively facilitating the bioreduction of Cr (Ⅵ) to Cr (Ⅲ) and also determined via correlation analysis. This study suggested compost-derived HA and FA coupling with MR-1 exhibited excellent performance for the bioreduction of Cr (Ⅵ) to Cr (Ⅲ).

Application of Non-invasive Micro-test Technology (NMT) in environmental fields: A comprehensive review.

Non-invasive Micro-test Technology (NMT) is a selective microelectrode technique which can detect the flux rates and three-dimensional motion directions of ions or molecules into and out of living organisms in situ without damaging the sample. It has the advantages of maintaining sample integrity, high temporal and spatial resolution, and being able to measure multiple sites simultaneously. In this paper we provide a comprehensive review on the development of NMT in recent years. Its principles, characteristics, and the differences with other microelectrode techniques are introduced. We discuss the applications of NMT in the field of phytoremediation, plant resistance, water quality monitoring, and toxicity mechanisms of heavy metals on organisms. Furthermore, the challenges and future prospects of NMT in the environmental field are presented.

Phytoextraction of cadmium-contaminated soils: comparison of plant species and low molecular weight organic acids.

To select suitable plants for phytoextraction of Cd-contaminated soils, we evaluated the phytoextraction potential of five local Cd-accumulators: Amaranthus hypochondriacus L., Solanum nigrum L., Phytolacca acinosa Roxb., Celosia argentea L., and Sedum spectabile Boreau. The plants were grown in three naturally contaminated soils with different total Cd levels (1.57, 3.89, and 22.4 mg kg-1). Throughout the experimental period, no plants showed any visible symptoms of metal toxicity. The Cd uptake of C. argentea was the greatest in the S-YS soil (105 µg plant-1) and among the greatest in the S-HC soil and S-TJ soil. Besides, C. argentea exhibited the highest bioconcentration factor (12.3) in three soils. To improve the phytoextraction efficiency of C. argentea, we applied four low molecular weight organic acids (LMWOAs): tartaric acid, malic acid, oxalic acid, and citric acid. Malic acid was more effective in enhancing Cd uptake by C. argentea than the other LMWOAs. Therefore, C. argentea may be a potential choice in actual remediation projects. Moreover, application of malic acid is an effective way to increase the phytoextraction efficiency of C. argentea.

Activated Sludge and other Aerobic Suspended Culture Processes.

This is a literature review for the year 2014 and contains information specifically associated with suspended growth processes including activated sludge and sequencing batch reactors. This review is a subsection of the treatment systems section of the annual literature review. The review encompasses modeling and kinetics, nutrient removal, system design and operation. Compared to past reviews, many topics show increase in activity in 2014. These include, nitrogen and phosphorus control, fate and effect of xenobiotics, industrial wastes treatment, and some new method for the determination of activated sludge. These topics are referred to the degradation of constituents in activated sludge. Other sections include population dynamics, process microbiology of activated sludge, modeling and kinetics. Many of the subsections in the industrial wastes: converting sewage sludge into fuel gases, thermos-alkali hydrolysis of Waste Activated Sludge (WAS), sludge used as H2 S adsorbents were also mentioned in this review.

Sustainability.

This review on Sustainability covers selected 2014 publications on the focus of the following sections: • Sustainable water and wastewater utilities • Sustainable water resources management • Stormwater and green infrastructure • Sustainability in wastewater treatment • Life cycle assessment (LCA) applications • Sustainability and energy in wastewater industry, • Sustainability and asset management.

Mixing and Transport.

This section covers research published during the calendar year 2014 on mixing and transport processes. The review covers mixing of anaerobic digesters, mixing of heat transfer, and environmental fate and transport.

Stream, Lake, and Reservoir Management.

This review on stream, lake, and reservoir management covers selected 2014 publications on the focus of the following sections: • Biota • Climate effect • Models • Remediation and restoration • Reservoir operations • Stream, Lake, and Reservoir Management • Water quality.

Feasibility of constructed wetland planted with Leersia hexandra Swartz for removing Cr, Cu and Ni from electroplating wastewater.

As a low-cost treatment technology for effluent, the constructed wetlands can be applied to remove the heavy metals from wastewater. Leersia hexandra Swartz is a metal-accumulating hygrophyte with great potential to remove heavy metal from water. In this study, two pilot-scale constructed wetlands planted with L. hexandra (CWL) were set up in greenhouse to treat electroplating wastewater containing Cr, Cu and Ni. The treatment performance of CWL under different hydraulic loading rates (HLR) and initial metal concentrations were also evaluated. The results showed that CWL significantly reduced the concentrations of Cr, Cu and Ni in wastewater by 84.4%, 97.1% and 94.3%, respectively. High HLR decreased the removal efficiencies of Cr, Cu and Ni; however, the heavy metal concentrations in effluent met Emission Standard of Pollutants for Electroplating in China (ESPE) at HLR less than 0.3 m3/m2 d. For the influent of 5 mg/L Cr, 10 mg/L Cu and 8 mg/L Ni, effluent concentrations were below maximum allowable concentrations in ESPE, indicating that the removal of Cr, Cu and Ni by CWL was feasible at considerably high influent metal concentrations. Mass balance showed that the primary sink for the retention of contaminants within the constructed wetland system was the sediment, which accounted for 59.5%, 83.5%, and 73.9% of the Cr, Cu and Ni, respectively. The data from the pilot wetlands support the view that CWL could be used to successfully remove Cr, Cu and Ni from electroplating wastewater.

Enhanced arsenic removal by graphene oxide chitosan composites through FeOx decoration: Influences and mechanism.

Iron decoration has been recognized as one of the most important paths to enhance contaminant adsorption by carbon-based composites. In this study, varying amounts of Fe (II) are used for the modification of graphene oxide chitosan (GOCS) materials to assess the impact of iron oxide (FeOx) morphology on the composites and their efficiency in arsenic (As) removal. Results show that incorporating 0.08 mol Fe(II) into GOCS yields better As removal performance, leading to a remarkable enhancement by 5 times for As(V) and 6 times for As(III). The iron minerals in the material consist of goethite (FeO(OH)) and magnetite (Fe3O4), with FeO(OH) playing a predominant role in As removal through the complexation and electrostatic attraction of -OH and Fe - O groups. The adsorption capacity for As (Qe) decreases with the increasing pH and the mass and volume ratio (m/v) but increases with the increasing initial concentration (C0). Besides, the presence of SO42- and HPO42- can significantly reduce As removal by the FeOx-modified GOCS. Under the conditions of pH = 3, m/v = 1.0 g/L, and C0 = 10 mg/L, a maximum Qe value reaches 61.94 mg/g. The adsorption is well-fitted to a pseudo-second-order kinetic model and is an endothermic, spontaneous, and monolayer adsorption process.

Effect of Mn on Cd2+ uptake by protoplasts of the Cd/Mn hyperaccumulator Celosia argentea Linn. differs by treatment method.

The effect mechanism of Mn on Cd uptake by Celosia argentea was investigated via a series of hydroponics experiments. The results showed that different manganese treatments had different effects on Cd uptake by C. argentea. Mn pretreatment increased Cd uptake by root protoplasts at Cd concentrations (4 and 6 µM). Protoplasts reached peak Cd uptake rate at 6 µM Cd and 25 °C, with 67.71 ± 0.13 µM h-1 mL-1 in the control, and 77.99 ± 0.49 µM h-1 mL-1 in the 50 µM Mn pretreatment group. However, simultaneous treatment with Cd and Mn reduced the Cd2+ uptake by root protoplasts. This discrepancy may be attributed to the fact that cadmium and manganese share some transporters in root cells. The transcriptome analysis in roots revealed that ten genes (including ABCC, ABCA, ABCG, ABCB, ABC1, BZIP19, and ZIP5) were significantly upregulated in response to Mn stress (p < 0.05). These genes regulate the expression of transporters belonging to the ABC, and ZIP families, which may be involved in Cd uptake by root cells of C. argentea. Mn pretreatment upregulates the expression of Mn/Cd transporters, enhancing Cd uptake by root protoplasts. For the simultaneous treatment of Cd and Mn, inhibition of Cd uptake was due to the competition of the same transporters. These findings provide helpful insights for understanding the mechanism of Mn and Cd uptake in hyperaccumulators and give implications to improve the phytoremediation of Cd-contaminated soil by C. argentea.

Composite Polysaccharide Hydrogel Loaded with Scutellaria baicalensis Extract for Diabetic Wound Treatment.

Diabetic wounds present significant burdens to both patients and the healthcare system due to their prolonged inflammatory phase and adverse microenvironment. Traditional Chinese medicine (TCM), particularly Scutellaria baicalensis extract (SE), has shown promise in wound healing. Herein, sesbania gum (SG) was oxidized and formed hydrogel with carboxymethyl chitosan (CMCS) through the imine bond. Then, SE was loaded into the hydrogel as a wound dressing (CMCS-OSG@SE hydrogel). In vitro experiments demonstrated the mechanical properties and ROS scavenging efficiency of the hydrogel, as well as the release of SE and its biocompatibility. In an vivo study, diabetic mice with S. aureus infection were used, and the CMCS--OSG@SE hydrogel dressing accelerated wound healing by promoting epidermal regeneration and collagen deposition. This composite polysaccharide hydrogel loaded with SE shows great potential for diabetic wound treatment.

A review of the degradation of antibiotic contaminants using advanced oxidation processes: modification and application of layered double hydroxides based materials.

In recent years, the treatment of organic pollutants has become a global concern due to the threat to human health posed by emerging contaminants, especially antibiotic contamination. Advanced oxidation processes (AOPs) can solve the organic pollution problem well, which have been identified as a promising solution for the treatment of hard-to-handle organic compounds including antibiotic contaminants. Layered double hydroxides (LDHs) are excellent catalysts because of their flexible tunability, favorable thermal stability, abundant active sites, and facile exchangeability of intercalated anions. This paper conducted a systematic review of LDHs-based materials used for common antibiotic removal by three significant AOP technologies, such as photocatalysis, the Fenton-like processes, and peroxymonosulfate catalysis. The degradation effects studied in various studies were reviewed, and the mechanisms were discussed in detail based on the type of AOPs. Finally, the challenges and the application trends of AOPs that may arise were prospected. The aim of this study is to suggest ways to provide practical guidance for the screening and improvement of LDH materials and the rational selection of AOPs to achieve efficient antibiotic degradation. This could lead to the development of more efficient and environmentally friendly materials and processes for degrading antibiotics, with significant implications for our ecological conservation by addressing water pollution.

Mn Pretreatment Improves the Physiological Resistance and Root Exudation of Celosia argentea Linn. to Cadmium Stress.

Phytoextraction using Celosia argentea Linn. by Mn pretreatment can potentially decontaminate Cd-contaminated soils. However, the mechanism that accelerates the Cd bioaccumulation is still unknown. In order to study the effect and mechanism of Mn pretreatment on Cd bioaccumulation in C. argentea, the hydroponic experiments were set to determine the chlorophyll content, antioxidant enzyme activity, malondialdehyde content, and root exudation of C. argentea. The results indicated that after seven days of Mn pretreatment, both the biomass and Cd concentrations in plants increased compared to the control group. One of the mechanisms for this was the improvement in the physiological resistance of C. argentea following pretreatment with Mn. Compared with Cd stress alone, Mn pretreatment increased photosynthesis and reduced membrane lipid peroxidation. Meanwhile, the activities of superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and ascorbate peroxidase (APX) were significantly reduced in leaves of C. argentea after Mn pretreatment through the reduction in the production of reactive oxygen species. In addition, Mn promoted the exudation of organic acids in the roots of C. argentea. The contents of citric and malic acids increased by 55.3% and 26.4%, respectively, which may be another important reason for Mn pretreatment increasing Cd bioaccumulation in C. argentea. Therefore, the present work shows that the pretreatment of seedlings with Mn can provide a meaningful strategy to improve the remediation efficiency of Cd-contaminated soils by C. argentea.

Effective adsorption of Pb(ii) from wastewater using MnO2 loaded MgFe-LD(H)O composites: adsorption behavior and mechanism.

Pb(ii) adsorption by MnO2/MgFe-layered double hydroxide (MnO2/MgFe-LDH) and MnO2/MgFe-layered metal oxide (MnO2/MgFe-LDO) materials was experimentally studied in lab-scale batches for remediation property and mechanism analysis. Based on our results, the optimum adsorption capacity for Pb(ii) was achieved at the calcination temperature of 400 °C for MnO2/MgFe-LDH. Langmuir and Freundlich adsorption isotherm models, pseudo-first-order and pseudo-second-order kinetics, Elovich model, and thermodynamic studies were used for exploring the Pb(ii) adsorption mechanism of the two composites. In contrast to MnO2/MgFe-LDH, MnO2/MgFe-LDO400 °C has a stronger adsorption capacity and the Freundlich adsorption isotherm model (R2 > 0.948), the pseudo-second-order kinetic model (R2 > 0.998), and the Elovich model (R2 > 0.950) provide great fits to the experimental data, indicating that the adsorption occurs predominantly via chemisorption. The thermodynamic model suggests that MnO2/MgFe-LDO400 °C is spontaneously heat-absorbing during the adsorption process. The maximum adsorption capacity of MnO2/MgFe-LDO400 °C for Pb(ii) was 531.86 mg g-1 at a dosage of 1.0 g L-1, pH of 5.0, and temperature of 25 °C. Through characterization analysis, the main mechanisms involved in the adsorption process were precipitation action, complexation with functional groups, electrostatic attraction, cation exchange and isomorphic replacement, and memory effect. Besides, MnO2/MgFe-LDO400 °C has excellent regeneration ability in five adsorption/desorption experiments. The above results highlight the powerful adsorption capacity of MnO2/MgFe-LDO400 °C and may inspire the development of new types of nanostructured adsorbents for wastewater remediation.

A comprehensive study of potentially toxic element contamination and source quantitative assessment by positive matrix factorization model: risk from the fine road dust of Chehe mining area, China.

Extreme mining activities can risk human life and the environment via potentially toxic elements (PTEs) in road dust, thus making their quantification and assessment unavoidable. For this purpose, we collected 50 fine road dust samples from the Chehe mining area, China, to quantify the level of contamination and ecological and health risks of PTEs comprising As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sb, and Zn, and their quantitative source apportionment using the positive matrix factorization model (PMF). Results indicated that the average values of Cd, Sb, As, Zn, Pb, and Cu in road dust were 1555.21, 586.78, 429.68, 429.43, 72.88, and 26.61 times higher than their background values. Pollution indices of PTEs revealed a strong level of contamination by Cd, Sb, As, Zn, and Pb, which were extremely polluted in the study area. The average values of the Nemerow integrated risk index (NIRI) and potential ecological risk index (RI) were 104.09 and 86.49 times the highest risk limit, respectively, which are extremely high ecological risks. Based on PMF for quantitative source identification, mining activities and fuel combustion were the main sources of PTEs in road dust contributing 57.25% and 35.95%, respectively. Furthermore, the health risk assessment indicated that Sb, As, Cr, Cd, and Pb in the Chehe road dust could lead to significantly serious carcinogenic and non-carcinogenic risks to both children and adults. The results of this study could be used to opt for strategies to mitigate the ecological and human health risk in the mining area of Hechi, China.

Integrated transcriptome and metabolome analysis reveals the mechanism of tolerance to manganese and cadmium toxicity in the Mn/Cd hyperaccumulator Celosia argentea Linn.

Understanding the molecular mechanism of tolerance to heavy metals in hyperaccumulators is important for improving the efficiency of phytoremediation and is interesting for evolutionary studies on plant adaption to abiotic stress. Celosia argentea Linn. was recently discovered to hyperaccumulate both manganese (Mn) and cadmium (Cd). However, the molecular mechanisms underlying Mn and Cd detoxification in C. argentea are poorly understood. Laboratory studies were conducted using C. argentea seedlings exposed to 360 µM Mn and 8.9 µM Cd hydroponic solutions. Plant leaves were analyzed using transcriptional and metabolomic techniques. A total of 3960 differentially expressed genes (DEGs) in plants were identified under Cd stress, among which 17 were associated with metal transport, and 10 belonged to the ATP transporter families. Exposures to Mn or Cd led to the differential expression of three metal transport genes (HMA3, ABCC15, and ATPase 4). In addition, 33 and 77 differentially expressed metabolites (DEMs) were identified under Mn and Cd stresses, respectively. Metabolic pathway analysis showed that the ABC transporter pathway was the most affected in Mn/Cd exposed seedlings. Conjoint transcriptome and metabolome analysis showed that the glutathione (GSH) metabolic pathway was over-represented in the KEGG pathway of both DEGs and DEMs. Our results confirm that the ABC transporter and GSH metabolic pathways play important roles in Mn and Cd detoxification. These findings provide new insight into the molecular mechanisms of tolerance to Mn and Cd toxicity in plants.

Cadmium uptake and membrane transport in roots of hyperaccumulator Amaranthus hypochondriacus L.

Hyperaccumulator Amaranthus hypochondriacus L. has huge potential in the remediation of cadmium (Cd)-contaminated soils and is necessary to understand the mechanism of Cd uptake by the roots. In this study, the mechanism of Cd uptake into the root of A. hypochondriacus was investigated using the non-invasive micro-test technology (NMT) by analyzing the rate of Cd2+ fluxes at different regions of the root tip; also we assessed the impact of different channel blockers and inhibitors on the Cd accumulation in the roots, the real-time Cd2+ fluxes, and the distribution of Cd along the roots. The results showed that the Cd2+ influx was greater near the root tip (within 100 µm of the tip). All the inhibitors, ion-channel blockers, and metal cations had different degrees of inhibition on the absorption of Cd in the roots of A. hypochondriacus. The net Cd2+ flux in the roots was significantly decreased by the Ca2+ channel blockers lanthanum chloride (LaCl3) by up to 96% and verapamil by up to 93%; as for the K+ channel blocker tetraethylammonium (TEA), it also caused a 68%-reduction on the net Cd2+ flux in the roots. Therefore, we infer that the uptake by A. hypochondriacus roots is mainly through the Ca2+ channels. The Cd absorption mechanism appears to be related to the synthesis of plasma membrane P-type ATPase and phytochelatin (PC), which is reflected by the inhibition of Ca2+ upon addition of inorganic metal cations. In conclusion, access of Cd ions into the roots of A. hypochondriacus is achieved through various ion channels, with the most important being the Ca2+ channel. This study will further enhance the literature regarding Cd uptake and pathways of membrane transport in roots of Cd hyperaccumulators.

Enhancing mechanism of arsenic(iii) adsorption by MnO2-loaded calcined MgFe layered double hydroxide.

The use of MnO2/MgFe-layered double hydroxide (MnO2/MgFe-LDH) and MnO2/MgFe-layered double oxide (MnO2/MgFe-LDO400 °C) for arsenic immobilization from the aqueous medium is the subject of this research. Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy were used to characterise MnO2/MgFe-LDH and MnO2/MgFe-LDO400 °C. Based on our developed method, MnO2 was spread on the clay composites' surfaces in the form of a chemical bond. The clay composite exhibited a good adsorption effect on arsenic. The experimental findings fit the pseudo-second-order model well, indicating that the chemisorption mechanism played a significant role in the adsorption process. Furthermore, the Freundlich model suited the adsorption isotherm data of all adsorbents well. The recycling experiment showed that MnO2/MgFe-LDH and MnO2/MgFe-LDO400 °C exhibited good stability and reusability. In summary, MnO2/MgFe-LDH and MnO2/MgFe-LDO400 °C are promising for developing processes for efficient control of the pollutant arsenic.