Ligand Conformation Fixation Strategy for Expanding the Structural Diversity of Copper-Tricarboxylate Frameworks and C2H2 Purification Performance Studies.

Structural and functional expansion of metal-organic frameworks (MOFs) is fundamentally important because it not only enriches the structural chemistry of MOFs but also facilitates the full exploration of their application potentials. In this work, by employing a dual-site functionalization strategy to lock the ligand conformation, we designed and synthesized a pair of biphenyl tricarboxylate ligands bearing dimethyl and dimethoxy groups and fabricated their corresponding framework compounds through coordination with copper(II) ions. Compared to the monofunctionalized version, introduction of two side groups can significantly fix the ligand conformation, and as a result, the dual-methoxy compound exhibited a different network structure from the mono-methoxy counterpart. Although only one almost orthogonal conformation was observed for the two ligands, their coordination framework compounds displayed distinct topological structures probably due to different solvothermal conditions. Significantly, with a hierarchical cage-type structure and good hydrostability, the dimethyl compound exhibited promising practical application value for industrially important C2H2 separation and purification, which was comprehensively demonstrated by equilibrium/dynamic adsorption measurements and the corresponding Clausius-Clapeyron/IAST/DFT theoretical analyses.

Substituent Engineering-Enabled Structural Rigidification and Performance Improvement for C2/CO2 Separation in Three Isoreticular Coordination Frameworks.

Construction of porous solid materials applied to the adsorptive removal of CO2 from C2 hydrocarbons is highly demanded thanks to the important role C2 hydrocarbons play in the chemical industry but quite challenging owing to the similar physical parameters between C2 hydrocarbons and CO2. In particular, the development of synthetic strategies to simultaneously enhance the uptake capacity and adsorption selectivity is very difficult due to the trade-off effect frequently existing between both of them. In this work, a combination of the dicopper paddlewheel unit and 4-pyridylisophthalate derivatives bearing different substituents afforded an isoreticular family of coordination framework compounds as a platform. Their adsorption properties toward C2 hydrocarbons and CO2 were systematically investigated, and subsequent IAST and density functional theory calculations combined with column breakthrough experiments verified their promising potential for C2/CO2 separations. Furthermore, the substituent engineering endowed the resulting compounds with simultaneous enhancement of uptake capacity and adsorption selectivity and thus better C2/CO2 separation performance compared to their parent compound. The substituent introduction not only mitigated the framework distortion via fixing the ligand conformation for establishment of better permanent porosity required for gas adsorption but also polarized the framework surface for host-guest interaction improvement, thus resulting in enhanced separation performance.

Rational Construction and Performance Regulation of an In(III)-Tetraisophthalate Framework for One-Step Adsorption-Phase Purification of C2H4 from C2 Hydrocarbons.

The development of porous materials for ethylene (C2H4) separation and purification, a very important separation process in the chemical industry, is urgently needed but quite challenging. In particular, the realization of selectivity-reversed adsorption (namely, C2H4 is not preferentially adsorbed) and the simultaneous capture of multinary coexisting impurities such as ethane (C2H6) and acetylene (C2H2) will significantly simplify process design and reduce energy and cost consumption, but such porous materials are quite difficult to design and have not yet been fully explored. In this work, by employing an aromatic-rich bithiophene-based tetraisophthalate ligand, we solvothermally fabricated an anionic In(III)-based framework termed ZJNU-115 featuring In(COO)4 as an inorganic secondary building unit as well as one-dimensional channels. Due to the absence of unsaturated metallic sites, together with aromatic-rich channel surface decorated with abundant hydrogen-bonding acceptors of carboxylate oxygen and thiophene sulfur atoms, desolvated ZJNU-115 exhibited an unusual adsorption relationship with respect to C2 hydrocarbons, namely, simultaneous and preferable capture of C2H6 and C2H2 over C2H4 at the temperatures investigated, thus representing a rare metal-organic framework (MOF) with the promising potential for one-step adsorption-phase purification of C2H4 from a trinary C2 hydrocarbon mixture. Compared to a few of the MOFs reported for such an application, ZJNU-115 displayed simultaneously good adsorption selectivities of both C2H2 and C2H6 over C2H4. Furthermore, its separation potential can be postsynthetically tailored by substituting dimethylammonium (Me2NH2+) counterions with tetraalkyl ammonium ions (NR4+; R = Me, Et, or n-Pr). More importantly, ZJNU-115 was stable in various organic solvents as well as aqueous solutions with pH values ranging from 5 to 9, thus laying a solid foundation for its practical applications. The design principle and the performance regulation strategy adopted in this work will offer valuable guidance for the contrapuntal construction of porous MOFs employed for direct multicomponent purification of C2H4 with improved performance.

Lanthanide-Organic Frameworks Featuring Three-Dimensional Inorganic Connectivity for Multipurpose Hydrocarbon Separation.

Implementation of lanthanide-organic frameworks (LOFs) as solid adsorbents has been frequently handicapped by their permanent porosity being difficult to establish owing to the remarkable flexibility and diversity of lanthanide ions in terms of coordination number and geometry. Construction of robust LOFs with permanent porosity for industrially important hydrocarbon separation will greatly expand their application potential. In this work, by distributing N and O donors into an m-terphenyl skeleton, we rationally synthesized a heterofunctional linker, and constructed a pair of isostructural LOFs. Due to the inclusion of a rarely observed three-dimensional metal-carboxylate backbone serving as a highly connected inorganic secondary building unit, their permanent porosities were successfully established by diverse gas isotherms. They can be applied as separating media not only for natural gas purification and removal of carbon dioxide from C2 hydrocarbons but also more importantly for single-step ethylene (C2H4) purification from a three-component C2Hn mixture during the adsorption process. The latter separation is very challenging and has been less reported in the literature. This work provides a unique example of LOFs featuring three-dimensional inorganic connectivity applied to multipurpose hydrocarbon separations.

A Microporous MOF Constructed by Cross-Linking Helical Chains for Efficient Purification of Natural Gas and Ethylene.

Natural gas (NG) and ethylene (C2H4) are two raw materials of significant value for manufacturing versatile fine chemicals and/or polymers, and thus the development of solid adsorbing agents such as metal-organic frameworks (MOFs) applied to their depuration is very crucial but remains highly challenging. In this research, we designed and synthesized a ligand containing mixed N and O coordination donors, which was solvothermally assembled with Cu(II) ions to generate a microporous MOF. X-ray crystallography revealed that the title MOF incorporates one-dimensional (1D) homochiral helical chains that are datively cross-linked to form open channels in the three-periodic coordination framework. Furthermore, the behaviors of C1-C2 hydrocarbons and carbon dioxide (CO2) adsorbed in the title MOF were systematically investigated, revealing its promising potential for the purification of both NG and C2H4. At 109 kPa and 298 K, the C2/methane (CH4), CO2/CH4, and acetylene (C2H2)/C2H4 adsorption selectivities are impressive, reaching as high as 62.9, 28.6, and 3.5, respectively. This work represents a unique MOF based on cross-linked homochiral helical chains exhibiting dual-function separation potentials for NG and C2H4 purifications.

A Series of Metal-Organic Framework Isomers Based on Pyridinedicarboxylate Ligands: Diversified Selective Gas Adsorption and the Positional Effect of Methyl Functionality.

Solvothermal assembly of copper(II) cations and 5-(pyridine-3-yl)isophthalate linkers bearing different position-substituted methyl groups afforded four ligand-induced metal-organic framework (MOF) isomers as a platform for investigating diverse selective gas adsorption properties and understanding the positional effect of methyl functionality. Single-crystal X-ray diffraction (SCXRD) analyses showed that, when the methyl substituent is at the para position with respect to the pyridinic N atom, the resultant framework compound ZJNU-27 features an eea-type topology, while the other three solids possess an isoreticular structure with an rtl-type topology when the methyl group is situated at the other positions. As revealed by N2 physi-adsorption measurements at 77 K, they exhibit moderate specific surface areas ranging from 584 to 1182 m2 g-1 and distinct degrees of framework flexibility, which are heavily dependent on the methyl position. Comprehensive gas adsorption studies show that they are capable of effectively separating three pairs of binary gas mixtures including C2H2-CH4, CO2-CH4, and CO2-N2 couples. Moreover, their uptake capacities and adsorption selectivities can be tailored by altering the methyl position. In addition, their framework hydro-stability is also influenced by the methyl position. Compared to ZJNU-27 and ZJNU-28, ZJNU-26 and ZJNU-29 exhibit poorer stability against H2O, although the methyl group is more close to inorganic secondary building units (SBUs), which are believed to originate from the steric effect of the methyl group. Overall, the four MOFs display the methyl position-dependent network architectures, framework flexibilities, and selective gas adsorption properties as well as hydrostabilities. The findings observed in this work not only demonstrate the importance of the positional effect of the functional group but also highlight that engineering the substituent position is a potential strategy for achieving the modulation of MOF structures and properties.

Modulation of Topological Structures and Adsorption Properties of Copper-Tricarboxylate Frameworks Enabled by the Effect of the Functional Group and Its Position.

To push forward the structural development and fully explore the potential utility, it is highly desired but challenging to regulate in a controllable manner the structures and properties of MOFs. In this work, we reported the structural and functional modulation of Cu(II)-tricarboxylate frameworks by employing a strategy of engineering the functionalities and their positions. Two pairs of unsymmetrical biaryl tricarboxylate ligands modified with a methyl group and a pyridinic-N atom at distinct positions were logically designed and synthesized, and their corresponding Cu(II)-based MOFs were solvothermally constructed. Diffraction analyses revealed that the variation of functionalities and their positions furnished three different types of topological structures, which we ascribed to the steric effect exerted by the methyl group and the chelating effect involving the pyridinic-N atom. Furthermore, gas adsorption studies showed that three of them are potential candidates as solid separation media for acetylene (C2H2) purification, with the separation potential tailorable by altering functionalities and their locations. At 106.7 kPa and 298 K, the C2H2 uptake capacity varies from 64.1 to 132.4 cm3 (STP) g-1, while the adsorption selectivities of C2H2 over its coexisting components of CO2 and CH4 fall in the ranges of 3.28-4.60 and 14.1-21.9, respectively.

Porous metal-organic frameworks for hydrogen storage.

The high gravimetric energy density and environmental benefits place hydrogen as a promising alternative to the widely used fossil fuels, which is however impeded by the lack of safe, energy-saving and cost-effective H2 storage systems. The use of solid adsorbents as candidate materials offers a less energy-intensive way of storing hydrogen. The exceptional diversity and tunability of the chemical composition, topological structure, and surface chemistry together with large surface area position porous metal-organic frameworks as promising hydrogen storage material candidates. In this review, we first introduce several classes of important metal-organic frameworks for hydrogen storage, and then highlight the progress associated with the key challenges to be addressed, including the improvement of hydrogen-framework interaction required for enhancing room-temperature hydrogen storage capacities, and the optimization/balance of both gravimetric and volumetric storage/working capacities. In particular, the strategies used to tune and enhance hydrogen binding energies have been comprehensively reviewed. Future development prospects and related challenges of using porous metal-organic frameworks as hydrogen storage materials are also outlined. This feature review provides a wide perspective and insightful thoughts and suggestions for hydrogen storage using metal-organic frameworks, and promotes the further development of hydrogen storage materials to realize a hydrogen economy.

Improving Ethane/Ethylene Separation Performance of Isoreticular Metal-Organic Frameworks via Substituent Engineering.

The preferential capture of ethane (C2H6) over ethylene (C2H4) presents a very cost-effective and energy-saving means applied to adsorptive separation and purification of C2H4 with a high product purity, which is however challenged by low selectivity originating from their similar molecular sizes and physical properties. Substituent engineering has been widely employed for selectivity regulation and improvement, but its effect on C2H6/C2H4 separation has been rarely explored to date. In this work, four isoreticular coordination framework compounds based on 5-(pyridin-3-yl)isophthalate ligands bearing different substituents were rationally constructed. As revealed by isotherm measurements, thermodynamic studies, and IAST computations, they exhibited promising utility for C2H6/C2H4 separation with moderate adsorption heat and a high uptake amount at a relatively low-pressure domain. Furthermore, the C2H6/C2H4 separation potential can be finely tuned and optimized via purposeful substituent alteration. Most remarkably, functionalization with a nonpolar methyl group yielded an improved separation efficiency compared to its parent compound. This work offers a good reference value for enhancing the C2H6/C2H4 separation efficiency of MOFs by engineering the pore microenvironment and dimensions via substituent manipulation.

Ligand Bent-Angle Engineering for Tuning Topological Structures and Acetylene Purification Performances of Copper-Diisophthalate Frameworks.

To enrich structural chemistry and widen the application prospects of MOFs (metal-organic frameworks), the development of a synthetic strategy to realize structural and functional modulation is highly demanded. By implementation of the linker bent-angle engineering strategy, three banana-like diisophthalate linkers with distinct bent angles were designed and synthesized. The inclusion of the targeted linkers into MOFs through solvothermal assembly with CuCl2·2H2O under identical conditions yielded three crystalline solids featuring diversified topological structures as revealed by X-ray crystallographic studies. Furthermore, functional explorations indicated that they are promising solid adsorbents for acetylene (C2H2) purification application with structurally dependent separation potentials. The results reported in this study illustrated a rare example of modulating the topological structures and separation efficiencies of MOFs by engineering the ligand bent angles.