RESUMEN
When planning oil wells with stainless steel components, two possible reasons for depassivation have to be considered-chemical depassivation caused by acidizing jobs and mechanical depassivation caused by various tools and hard particles. The study explores conditions causing chemical activation of investigated steels and circumstances under which repassivation occurs after activation. The main focus of the study is to determine, how quickly various steels can repassivate under different conditions and to find pH values where repassivation will occur after depassivation. The investigated steels were ferritic (martensitic or bainitic) in the cases of 13Cr, 13Cr6Ni2Mo, and 17Cr4Ni2Mo, austenitic in the case of 17Cr12Ni2Mo, and duplex (austenitic and ferritic) in the case of 22Cr5Ni3Mo. Potentiodynamic experiments were employed to obtain electrochemical properties of investigated steels, followed by immersion tests to find ultimate conditions, where the steels still retain their passivity. After obtaining this information, scratch tests were performed to study the repassivation kinetics. It was found that repassivation times are similar for nearly all investigated steels independent of their chemical composition and microstructure.
RESUMEN
We introduce a novel scanning projection field emission microscope (SPFEM) designed to study flat broad-area field emission cathodes. The instrument merges capabilities of measuring the electron field emission current from an individual emitting site and genuine projection of electrons onto a luminescent screen. This is achieved by an optimized shape of the anode probe having a 0.04 mm aperture which generates an uniform macroscopic electric field across the investigated area of the cathode. This fact also enables presentation of the relation between the current density and the applied electric field. The magnification of the electron-optical system alone was calculated by computational modeling for some cathode-probe distances and for some voltages. The unique SPFEM performance is demonstrated on smooth sulfur-doped nanodiamond films synthesized on molybdenum substrates.
RESUMEN
In the paper the results of the acoustic emission (AE) based detection and characterization of stress-corrosion cracking (SCC) in stainless steel are presented. As supportive methods for AE interpretation, electrochemical noise, specimen elongation measurements, and digital imaging of the specimen surface were used. Based on the defined qualitative and quantitative time and power spectra characteristics of the AE bursts, a manual and an automatic procedure for the detection of crack related AE bursts were introduced. The results of the analysis of the crack related AE bursts indicate that the AE method is capable of detecting large scale cracks, where, apart from intergranular crack propagation, also some small ductile fractures occur. The sizes of the corresponding ductile fracture areas can be estimated based on a relative comparison of the energies of the detected AE bursts. It has also been shown that AE burst time and power spectra features can be successfully used for the automatic detection of SCC.