Reversible Capture Mechanism of CO2 as a Zn(II)-Methylcarbonate.

In this study, we elucidate the reaction mechanism for capturing CO2 with the ZnL1(MeOH) complex (L1=diacetyl-2-(4-methyl-3-thiosemicarbazone)-3-(2-hydrazinatopyridine)) in a methanol solution, using density functional theory calculations. One pathway involves the protonation of ZnL1(MeOH) by methylcarbonic acid, followed by ligand exchange of MeOH with MeOCO2 -. An alternative mechanism suggests a tautomerization between ZnL1(MeOH) and Zn(HL1)(OMe), followed by CO2 insertion. The latter pathway is energetically more favorable than the former and more complex than initially proposed. In fact, we unveiled that the solvent catalyzes tautomerization, as one explicit methanol molecule acts as a proton transfer agent. Then, Zn(HL1)(OMe) captures CO2, yielding a methylcarbonate bound to the metal center. The final step involves a rearrangement that leads to the cleavage of the Zn-O(Me)(COO) bond and the formation of a new Zn-O(COOMe) bond, along with the rotation of the methylcarbonate group. We consider an additional mechanism that combines tautomerization and ligand exchange but is endergonic and requires a high activation barrier for the ligand exchange. Furthermore, we evaluate the ligand basicity through the pKa calculated values of the Zn(II) complexes, the effects of varying the ligand from 4-methyl-thiosemicarbazone to 4-ethyl (L2), 4-phenethyl (L3), and 4-benzyl (L4) derivatives, and reversibility of the reaction in an argon environment.

The quest for a bidirectional auxetic, elastic, and enhanced fracture toughness material: Revisiting the mechanical properties of the BeH2 monolayers.

Herein we show a density functional theory-based study performed on two recently predicted polymorphs of the BeH2 monolayer, α-BeH2 and ß-BeH2 . The α-BeH2 phase possesses an in-plane negative Poisson's ratio (NPR), introducing it into the unique group of auxetic materials. Our assessment delves into the linear-elastic and finite-strain regimes to understand both polymorphs' structural and mechanical responses to deformation. We find that the in-plane NPR is shown to be only parallel to the bonds in α-BeH2 and remains along the uniaxial tensile path. Concomitantly, an out-of-plane transition toward auxetic is also revealed in regions exhibiting conventional Poisson's ratios, making α-BeH2 a bidirectionally auxetic material. While phase transitions in ß-BeH2 are triggered at very short strains, α-BeH2 displays excellent elasticity against tension, superior to that of most currently known 2D materials.

Correction: Structure and bonding of molecular stirrers with formula B7M2- and B8M2 (M = Zn, Cd, Hg).

Correction for 'Structure and bonding of molecular stirrers with formula B7M2- and B8M2 (M = Zn, Cd, Hg)' by Rui Yu et al., Phys. Chem. Chem. Phys., 2020, 22, 12312-12320, https://doi.org/10.1039/D0CP01603A.

Photophysical characterization of tetrahydroxyphenyl porphyrin Zn(II) and V(IV) complexes: experimental and DFT study.

Photodynamic therapy (PDT) is a promising technique for the treatment of various diseases. In this sense, the singlet oxygen quantum yield (Φ∆) is a physical-chemical property that allows to stablish the applicability of a potential photosensitizers (PS) as a drug for PDT. In the herein report, the Φ∆ of three photosensitizers was determined: metal-free tetrahydroxyphenyl porphyrin (THPP), THPP-Zn and the THPP-V metal complexes. Their biological application was also evaluated. Therefore, the in vitro study was carried out to assess their biological activity against Escherichia coli. The metal-porphyrin complexes exhibited highest activities against the bacterial strain Escherichia coli. at the highest concentration (175 µg/mL) and show better activity than the free base ligand (salts and blank solution). Results indicated a relation between Φ∆ and the inhibitory activity against Escherichia coli, thus, whereas higher is the Φ∆, higher is the inhibitory activity. The values of the Φ∆ and the inhibitory activity follows the tendency THPP-Zn > THPP > THPP-V. Furthermore, quantum chemical calculations allowed to gain deep insight into the electronic and optical properties of THPP-Zn macrocycle, which let to verify the most probable energy transfer pathway involved in the singlet oxygen generation.

Influence of LiTaO3 (0001) and KTaO3 (001) Perovskites Structures on the Molecular Adsorption of Styrene and Styrene oxide: A Theoretical Insight by Periodic DFT Calculations.

In this research, the adsorption of styrene and styrene oxide, both biomass derivatives, on KTaO3 (001) and LiTaO3 (0001) perovskite-like structures was studied from a theoretical point of view. The study was carried out using density functional theory (DFT) calculations. The adsorption phenomenon was deeply studied by calculating the adsorption energies (Eads ), adsorbate-surface distances (Å) and evaluating the differences of charge density and charge transfer (ΔCT). For complexes adsorbed on KTaO3 (TaO2 , KO and K(OH)2 exposed layers), the highest Eads was found for styrene oxide, attributed to the oxygen reactivity of the epoxy group describing a strong interaction with the surface. However, when evaluating a K(O)2 model, a more favorable interaction of styrene with the surface is observed, resulting in a high Eads of -9.9 eV and a ΔCT of 3.1e. For LiTaO3 , more favorable interactions are found for both adsorbates compared to KTaO3 , evidenced by the higher adsorption energies and charge density differences, particularly for the styrene complex adsorbed on TaO2 exposed layer (Eads : -10.2 eV). For the LiO termination, the surface exposed oxygens are fundamental for the adsorption of styrene and styrene oxide, leading to a considerable structural distortion. The obtained results thus provide understanding of the structural features, surface reactivity and adsorption sites of LiTaO3 and KTaO3 perovskite in the context of a heterogeneous catalytic process, such as the oxidation of styrene.

Understanding the Deactivating/Activating Mechanisms in Three Optical Chemosensors Based on Crown Ether with Na+ /K+ Selectivity Using Quantum Chemical Tools.

The optical properties and transduction mechanisms in three reported optical chemosensors based on crown ether with selectivity turn-on luminescence toward Na+ over K+ , were investigated using Density Functional Theory/Time-Dependent Density Functional Theory (DFT/TD-DFT). The analysis of the structural stability of the conformers enables us to understand the optical properties of the sensors and their selectivity toward Na+ . The UV-Vis absorption and the radiative channels of the adiabatic S1 excited state were assessed. In these reported sensors, the Photoinduced Electron Transfer (PET) from the nitrogen and the oxygen (O-atoms of the substituted N-phenylaza group) lone pairs to fluorophore groups lead to a nonradiative deactivation process in the fluorophore to p-conjugated anilino-1,2,3-triazol ionophore. This Intramolecular Charge Transfer (ICT) deactivation produced the luminescence quenching in the free sensors and K+ /C1 complexes. The Na+ /sensor interaction produced a Chelation Enhanced Fluorescence (CHEF) due to the inhibition of the PET and ICT, which was confirmed via the calculated oscillator strength of the emission process. The K+ /sensor interaction displayed the possibility of PET in C3; however, this fact was inconclusive to affirm the quenching of luminescence, the CHEF in C2 and C3 and the selectivity toward Na+ over K+ in these systems. For this reason, simulation of the absorption and emissions spectra (calculated oscillator strength), calculation of the kinetic parameters (in charge transfers and radiative deactivations process), analysis of the metal-ligand interaction character, and the analysis of the structural stability of the conformers were determinant factors to understand the selectivity and the optical properties of these chemosensors. The results suggest that these theoretical tools can also be used to predict the optical properties and Na+ /K+ selectivity of optical chemosensors.

Photophysical characterization and in vitro anti-leishmanial effect of 5,10,15,20-tetrakis(4-fluorophenyl) porphyrin and the metal (Zn(II), Sn(IV), Mn(III) and V(IV)) derivatives.

In this report 5 compounds were synthesized and structural and their photophysical characterization was performed (ΦΔ and Φf). Furthermore, in this in vitro study, their biological activity against Leishmania panamensis was evaluated. The photophysical behavior of these compounds was measured and high ΦΔ and low Φf was observed. Besides, DFT quantum calculations on the electronic structures were performed. Finally, the biological activity was determined by means of the compounds capacity to inhibit the viability of parasites using the MTT assay. The inclusion of the metal ions substantially modified the photophysical and biological properties in comparison with the free metal porphyrin (1). In fact, Zn2+ porphyrin derivative (2) showed a marked decrease of Φf and increase of ΦΔ. In this sense, using TDDFT approaches, a luminescent process for Sn4+ derivative (3) was described, where emissive states involve the ML-LCT transition. So, this led to a decrease in the singlet oxygen production (0.82-0.67). Biological results showed that all compounds inhibit the viability of L. panamensis with high efficiency; the decrease in the viability was greater as the concentration of exposure increased. Finally, under light irradiation the IC50 of L. panamensis against the Zn(II)-porphyrin (2) and V(IV)-porphyrin (5) was lower than the IC50 of the Glucantime control (IC50 = 2.2 and 6.95 µM Vs IC50 = 12.7 µM, respectively). We showed that the use of porphyrin and metalloporphyrin-type photosensitizers with exceptional photophysical properties can be successful in photodynamic therapy (PDT) against L. panamensis, being the diamagnetic ion Zn2+ a candidate for the preparation of metalloporphyrins with high singlet oxygen production.

Expanding the Knowledge of the Selective-Sensing Mechanism of Nitro Compounds by Luminescent Terbium Metal-Organic Frameworks through Multiconfigurational ab Initio Calculations.

The current research shows that the excited-state dynamics of the antenna ligand, both in the interacting system sensor/analyte and in the sensor without analyte, is a safe tool for elucidating the detection principle of the luminescent lanthanide-based metal-organic framework sensors. In this report the detection principle of the luminescence quenching mechanism in two Tb-based MOFs sensors is elucidated. The first system is a luminescent Tb-MOF [Tb(BTTA)1.5(H2O)4.5]n (H2BTTA = 2,5-bis(1H-1,2,4-triazol-1-yl) terephthalic acid) selective to nitrobenzene (NB), labeled as Tb-1. The second system is {[Tb(DPYT)(BPDC)1/2(NO3)]·H2O}n (DPYT = 2,5-di(pyridin-4-yl) terephthalic acid, BPDC = biphenyl-4,4'-dicarboxylic acid), reported as a selective chemical sensor to nitromethane (NM) in situ, labeled as Tb-2. The luminescence quenching of the MOFs is promoted by intermolecular interactions with the analytes that induce destabilization of the T1 electronic state of the linker "antenna", altering thus the sensitization pathways of the Tb atoms. This study demonstrates the value of host-guest interaction simulations and the rate constants of the radiative and nonradiative processes in understanding and elucidating the sensing mechanism in Ln-MOF sensors.

A novel series of pyrazole derivatives toward biological applications: experimental and conceptual DFT characterization.

A new series of 13 pyrazole-derivative compounds with potential antifungal activity were synthetized with good yields. The series have the (E)-2-((1-(R)-3,5-dimethyl-1H-pyrazol-4-yl)diazenyl)phenol general structure and were characterized by means of X-ray diffraction, UV-Vis, FTIR, 1H-NMR, 13C-NMR, and two-dimensional NMR experiments. This experimental characterization was complemented by DFT simulations. A deep insight regarding molecular reactivity was accomplished employing a conceptual DFT approach. In this sense, dual descriptors were calculated at HF and DFT level of theory and GGV spin-density Fukui functions. The main reactive region within the molecules was mapped through isosurface and condensed representations. Finally, chemical descriptors that have previously shown to be close related to biological activity were compared within the series. Thus, higher values of chemical potential ω and electrophilicity χ obtained for compounds 10, 9, 8, 6 and 7, in this order, suggest that these molecules are the better candidates as biological agents.

B3Al4+: A Three-Dimensional Molecular Reuleaux Triangle.

We systematically explore the potential energy surface of the B3Al4+ combination of atoms. The putative global minimum corresponds to a structure formed by an Al4 square facing a B3 triangle. Interestingly, the dynamical behavior can be described as a Reuleaux molecular triangle since it involves the rotation of the B3 triangle at the top of the Al4 square. The molecular dynamics simulations, corroborating with the very small rotational barriers of the B3 triangle, show its nearly free rotation on the Al4 ring, confirming the fluxional character of the cluster. Moreover, while the chemical bonding analysis suggests that the multicenter interaction between the two fragments determines its fluxionality, the magnetic response analysis reveals this cluster as a true and fully three-dimensional aromatic system.

DFT/MRCI assessment of the excited-state interplay in a coumarin-schiff Mg2+ fluorescent sensor.

Fluorescent sensors with selectivity and sensitivity to metal ions are an active field in supramolecular chemistry for biochemical, analytical, and environmental problems. Mg2+ is one of the most abundant divalent ions in the cell, and it plays a critical role in many biological processes. Coumarin-based sensors are widely used as desirable fluorophore and binding moieties showing a remarkable sensitivity and fluorometric enhancement for Mg2+ . In this work, density functional theory/multireference configuration interaction (DFT/MRCI) calculations were performed in order to understand the sensing behavior of the organic fluorescent sensor 7-hydroxy-4-methyl-8-((2-(pyridin-2-yl)hydrazono)methyl)-2H-chromen-2-one (PyHC) in ethanol to solvated Mg2+ ions. The computed optical properties reproduce well-reported experimental data. Our results suggest that after photoexcitation of the free PyHC, a photo-induced electron transfer (PET) mechanism may compete with the fluorescence decay to the ground state. In contrast, this PET channel is no longer available in the complex with Mg2+ making the emissive decay more efficient. © 2019 Wiley Periodicals, Inc.

Sensing mechanism elucidation of a europium(III) metal-organic framework selective to aniline: A theoretical insight by means of multiconfigurational calculations.

A theoretical procedure, via quantum chemical computations, to elucidate the detection principle of the turn-off luminescence mechanism of an Eu-based Metal-Organic Framework sensor (Eu-MOF) selective to aniline, is accomplished. The energy transfer channels that take place in the Eu-MOF, as well as understanding the luminescence quenching by aniline, were investigated using the well-known and accurate multiconfigurational ab initio methods along with sTD-DFT. Based on multireference calculations, the sensitization pathway from the ligand (antenna) to the lanthanide was assessed in detail, that is, intersystem crossing (ISC) from the S1 to the T1 state of the ligand, with subsequent energy transfer to the 5 D0 state of Eu3+ . Finally, emission from the 5 D0 state to the 7 FJ state is clearly evidenced. Otherwise, the interaction of Eu-MOF with aniline produces a mixture of the electronic states of both systems, where molecular orbitals on aniline now appear in the active space. Consequently, a stabilization of the T1 state of the antenna is observed, blocking the energy transfer to the 5 D0 state of Eu3+ , leading to a non-emissive deactivation. Finally, in this paper, it was demonstrated that the host-guest interactions, which are not taken frequently into account by previous reports, and the employment of high-level theoretical approaches are imperative to raise new concepts that explain the sensing mechanism associated to chemical sensors.

Structural effects of alkali-metals on the B12 skeleton.

After an exhaustive exploration of the potential energy surface of B12E- and B12E2 (E = Li-Cs) systems, it was found that for the anionic series, a cage-type and a quasi-planar structure (very similar to the naked B12 cluster) compete to be the putative global minimum. For neutral systems, competition arises between the quasi-planar cluster and a double-ring with the alkali-metals on the highest-symmetry axis. The chemical bonding analyses show that for the entire series, the interaction, predominantly electrostatic, is essentially indistinguishable regardless of the alkali-metal and insufficient for determining the isomeric preference. The isomerization energy decomposition analysis (IEDA) reveals that in the anions, the structural change in the lighter complexes is possible because of the relatively low energy required for the boron skeleton deformation, as opposed to the case of heavy metals. In the case of the neutral systems, the factor determining one isomer over the other corresponds to that of the energy deformation of the alkali-metal dimer.

Structure and bonding of molecular stirrers with formula B7M2- and B8M2 (M = Zn, Cd, Hg).

In this work, we systematically explored clusters with formula B7M2- and B8M2 (M = Zn, Cd, Hg). The putative global minima are formed by an M2 dimer and a disk-shaped boron wheel. Moreover, the chemical bonding analysis revealed that charge transfer from the metal atoms to the boron motifs resulted in (B7)3-(M2)2+ and (B8)2-(M2)2+ complexes with double (σ + π) aromatic boron wheels and a single bond for the metallic dimer. Above all, the computed rotational barriers of the M-M fragment with respect to the boron disk and molecular dynamics simulations indicate a virtually barrierless spin, resembling a magnetic stirrer on a baseplate.

New Sensitive and Selective Chemical Sensors for Ni2+ and Cu2+ Ions: Insights into the Sensing Mechanism through DFT Methods.

We report the synthesis and theoretical study of two new colorimetric chemosensors with special selectivity and sensitivity to Ni2+ and Cu2+ ions over other metal cations in the CH3CN/H2O solution. Compounds (E)-4-((2-nitrophenyl)diazenyl)-N,N-bis(pyridin-2-ylmethyl)aniline (A) and (E)-4-((3-nitrophenyl)diazenyl)-N,N-bis(pyridin-2-ylmethyl)aniline (B) exhibited a drastic color change from yellow to colorless, which allows the detection of the mentioned metal cations through different techniques. The interaction of sensors with these metal ions induced a new absorption band with a hypsochromic shift to the characteristic signal of the free sensors. A theoretical study via time-dependent density functional theory (TD-DFT) was performed. This method has enabled us to reproduce the hypsochromic shift in the maximum UV-vis absorption band and explain the selective sensing of the ions. For all of the systems studied, the absorption band is characterized by a π → π* transition centered in the ligand. Instead of Ni2+ and Cu2+ ions, the transition is set toward the σ* molecular orbital with a strong contribution of the 3dx2-y2 transition (π → 3dx2-y2). These absorptions imply a ligand-to-metal charge transfer (LMCT) mechanism that results in the hypsochromic shift in the absorption band of these systems.

Understanding the Selective-Sensing Mechanism of Al3+ Cation by a Chemical Sensor Based on Schiff Base: A Theoretical Approach.

A methodology that allows us to explain the experimental behavior of a turn-on luminescent chemosensor is proposed and verified in 1-[(1H-1,2,4-triazole-3-ylimino)-methyl]-naphthalene-2-ol] (L1), selective to Al3+ cations. This sensor increases its emission when interacting with ions upon excitation at 442 nm, which is denoted as the chelation-enhanced fluorescence effect. Photoinduced electron transfer is responsible for the fluorescence quenching in L1 at 335 nm, in Ni2+/L1 at 385 nm, and in Zn2+/L1 at 378 nm. In Ni2+/L, ligand-to-metal charge transfer (LMCT), from the molecular orbital of the ligand to the Ni 3dx2 - y2 orbital, can contribute to the quenching of fluorescence. Based on oscillator strength, the highest luminescence intensity of L1 at 401 nm and that of Al3+/L1 at 494 nm in relation to the others is evidenced. The consideration of the relative energies of the excited states and the calculation of the rate and lifetime of the electron transfer deactivation are necessary to get a good description of the sensor.

Exploring the relevance of thiophene rings as bridge unit in acceptor-bridge-donor dyes on self-aggregation and performance in DSSCs.

The possibility of dye charge recombination in DSSCs remains a challenge for the field. This consists of: (a) back-transfer from the TiO2 to the oxidized dye and (b) intermolecular electron transfer between dyes. The latter is attributed to dye aggregation due to dimeric conformations. This leads to poor electron injection which decreases the photocurrent conversion efficiency. Most organic sensitizers are characterized by an Acceptor-Bridge-Donor (A-Bridge-D) arrangement that is commonly employed to provide charge separation and, therefore, lowering the unwanted back-transfer. Here, we address the intermolecular electron transfer by studying the dimerization and photovoltaic performance of a group of A-Bridge-D structured dyes. Specifically, eight famous sulfur containing π-bridges were analyzed (A and D remained fixed). Through quantum mechanical and molecular dynamics approaches, it was found that the formation of weakly stabilized dimers is allowed. The dyes with covalently bonded and fused thiophene rings as Bridges, 6d and 7d as well as 8d with a fluorene, would present high aggregation and, therefore, high probability of recombination processes. Conversely, using TiO2 cluster and surface models, delineated the shortest bridges to improve the adsorption energy and the stability of the system. Finally, the elongation of the bridge up to 2 and 3 units and their photovoltaic parameters were studied. These results showed that all the sensitizers are able to provide similar photocurrent outcomes, regardless of whether the bridge is elongated. © 2017 Wiley Periodicals, Inc.

Stable NCNgNSi (Ng=Kr, Xe, Rn) Compounds with Covalently Bound C-Ng-N Unit: Possible Isomerization of NCNSi through the Release of the Noble Gas Atom.

Although the noble gas (Ng) compounds with either Ng-C or Ng-N bonds have been reported in the literature, compounds containing both bonds are not known. The first set of systems having a C-Ng-N bonding unit is predicted herein through the analysis of stability and bonding in the NCNgNSi (Ng=Kr-Rn) family. While the Xe and Rn inserted analogues are thermochemically stable with respect to all dissociation channels, but for the one producing CNSiN and free Ng, NCKrNSi has another additional three-body dissociation channel, NCKrNSi→CN+Kr+NSi, which is exergonic by -9.8 kcal mol-1 at 298 K. This latter dissociation can be hindered by lowering the temperature. Moreover, the NCNgNSi→Ng+CNSiN dissociation is also kinetically prohibited by a quite high free energy barrier ranging from 25.2 to 39.3 kcal mol-1 , with a gradual increase in going from Kr to Rn. Therefore, these compounds are appropriate candidates for experimental realization. A detailed bonding analysis by employing natural bond orbital, electron density, energy decomposition, and adaptive natural density partitioning analyses indicates that both Ng-N and C-Ng bonds in the title compounds are covalent in nature. In fact, the latter analysis indicates the presence of delocalized 3c-3e σ-bond within the C-Ng-N moiety and a totally delocalized 5c-2e σ-bond in these compounds. This is an unprecedented bonding characteristic in the sense that the bonding pattern in Ng inserted compounds is generally represented as the presence of covalent bond in one side of Ng, and the ionic interaction in the other side. Further, the dissociation of Ng from NCNgNSi facilitates the formation of a higher energy isomer of NCNSi, CNSiN, which cannot be formed from bare NCNSi as such, because of the very high free energy barrier associated with the isomeric transformation. Therefore, in the presence of Ng atoms it might be possible to detect the high energy isomer.

Boron Nanowheels with Axles Containing Noble Gas Atoms: Viable Noble Gas Bound M©B10- Clusters (M=Nb, Ta).

The viability of noble gas axled boron nanowheels Ngn M©B10- (Ng=Ar-Rn; M=Nb, Ta; n=1, 2) is explored by ab initio computations. In the resulting Ng2 -M complexes, the Ng-M-Ng nanorod passes through the center of the B10- ring, providing them with an inverse sandwich-like structure. While in the singly Ng bound analogue, the Ng binding enthalpy Hb at 298 K ranges from 2.5 to 10.6 kcal mol-1 , in doubly Ng bound cases it becomes very low for the Ng2 M©B10- →Ng+NgM©B10- dissociation channel, except for the case of Rn, for which the corresponding Hb values are 3.4 (Nb) and 4.0 kcal mol-1 (Ta). For a given Ng, Ta has slightly higher Ng-binding ability than Nb. The corresponding free-energy changes indicate that these systems, particularly the Xe and Rn complexes, are good candidates for experimental realization in a low-temperature matrix. The Ng-M bonds were found to be covalent in nature, as reflected in their large Wiberg bond indices, formation of a 2c-2e σ orbital between Ng and M centers in natural bond orbital and adaptive natural density partitioning (AdNDP) analyses, and the short Ng-M distances. Energy decomposition analysis and a study on the natural orbitals for chemical valence show that the Ng-M contact is supported mainly by the orbital and electrostatic interactions, with almost equal contributions. Although both the Ng→M σ donation and Ng←M π backdonation play roles in the origin of orbital interaction, the former is significantly dominant over the latter. Further, AdNDP analysis indicates that the doubly aromatic character (both σ and π) in MB10- clusters is not perturbed by the interaction with Ng atoms.

Synthesis of Au Nanoparticles Assisted by Linker-Modified TiO2 Nanoparticles.

Plasmonic nanoparticles, especially gold ones, have been widely employed as photosensitizers in photoelectrovoltaic or photocatalytic systems. To improve the system's performance, a greater interaction of the nanoparticles with the semiconductor, generally TiO2, is desired. Moreover, this performance is enhanced when an efficient covering of TiO2 surface by the sensitizer is achieved. The Brust-Schiffrin-like methods are of the most employed approaches for nanoparticles synthesis. In a traditional approach, the reduction of the gold precursor is performed in the presence of a stabilizer (typically a thiol molecule) free in solution. A second step in which the obtained nanoparticles are anchored to the semiconductor surface is necessary in the case of photosensitive applications. Drawbacks like steric hindrance turn more difficult the covering of the semiconductor's surface by nanoparticles. In this paper, we report a variation of this methodology, where the linker is previously anchored to the TiO2 nanoparticles surface. The resulting system is employed as the stabilizer in the gold reduction step. This strategy is carried out in aqueous media in two simple steps. A great covering of the titania surface by gold nanoparticles is achieved in all cases and the gold nanoparticles in the resulting nanoaggregate might be useful for photoelectrovoltaic or photocatalytic applications.