Image-based computer modeling assessment of microwave ablation for treatment of adrenal tumors.

PURPOSE: To assess the feasibility of delivering microwave ablation for targeted treatment of aldosterone producing adenomas using image-based computational models. METHODS: We curated an anonymized dataset of diagnostic 11C-metomidate PET/CT images of 14 patients with aldosterone producing adenomas (APA). A semi-automated approach was developed to segment the APA, adrenal gland, and adjacent organs within 2 cm of the APA boundary. The segmented volumes were used to implement patient-specific 3D electromagnetic-bioheat transfer models of microwave ablation with a 2.45 GHz directional microwave ablation applicator. Ablation profiles were quantitatively assessed based on the extent of the APA target encompassed by an ablative thermal dose, while limiting thermal damage to the adjacent normal adrenal tissue and sensitive critical structures. RESULTS: Across the 14 patients, adrenal tumor volumes ranged between 393 mm3 and 2,395 mm3. On average, 70% of the adrenal tumor volumes received an ablative thermal dose of 240CEM43, while limiting thermal damage to non-target structures, and thermally sparing 83.5-96.4% of normal adrenal gland. Average ablation duration was 293 s (range: 60-600 s). Simulations indicated coverage of the APA with an ablative dose was limited when the axis of the ablation applicator was not well aligned with the major axis of the targeted APA. CONCLUSIONS: Image-based computational models demonstrate the potential for delivering microwave ablation to APA targets within the adrenal gland, while limiting thermal damage to surrounding non-target structures.

System for delivering microwave ablation to subcutaneous tumors in small-animals under high-field MRI thermometry guidance.

PURPOSE: Bio-effects following thermal treatments are a function of the achieved temperature profile in tissue, which can be estimated across tumor volumes with real-time MRI thermometry (MRIT). Here, we report on expansion of a previously developed small-animal microwave hyperthermia system integrated with MRIT for delivering thermal ablation to subcutaneously implanted tumors in mice. METHODS: Computational models were employed to assess suitability of the 2.45 GHz microwave applicators for delivering ablation to subcutaneous tumor targets in mice. Phantoms and ex-vivo tissues were heated to temperatures in the range 47-67 °C with custom-made microwave applicators for validating MRIT with the proton resonance frequency shift method against fiberoptic thermometry. HAC15 tumors implanted in nude mice (n = 6) were ablated in vivo and monitored with MRIT in multiple planes. One day post ablation, animals were euthanized, and excised tumors were processed for viability assessment. RESULTS: Average absolute error between temperatures from fiberoptic sensors and MRIT was 0.6 °C across all ex-vivo ablations. During in-vivo experiments, tumors with volumes ranging between 5.4-35.9 mm3 (mean 14.2 mm3) were ablated (duration: 103-150 s) to achieve 55 °C at the tumor boundary. Thermal doses ≥240 CEM43 were achieved across 90.7-98.0% of tumor volumes for four cases. Ablations were incomplete for remaining cases, attributed to motion-affected thermometry. Thermal dose-based ablative tumor coverage agreed with viability assessment of excised tumors. CONCLUSIONS: We have developed a system for delivering microwave ablation to subcutaneous tumors in small animals under MRIT guidance and demonstrated its performance in-vivo.

Transmission Coefficient-Based Monitoring of Microwave Ablation: Development and Experimental Evaluation in Ex Vivo Tissue.

OBJECTIVES: To assess the feasibility of monitoring transient evolution of thermal ablation zones with a microwave transmission coefficient-based technique. METHODS: Microwave ablation was performed in ex vivo bovine liver with two 2.45 GHz directional antennas. A custom apparatus was developed to enable periodic switching between "heating mode" when power from the generator was coupled to the antennas, and "monitoring mode", when antennas were coupled to a network analyzer for broadband transmission coefficient ( s21) measurements. Experiments were performed with applied powers ranging between 30-50 W per antenna for 53-1219 s. Transient s21 spectra over the course of ablations were analyzed to determine feasibility of predicting extent of ablation zones and compared against ground truth assessment from images of sectioned tissue. A linear regression-based mapping between the two datasets was derived to predict ablation extent. RESULTS: Normalized average transmission coefficient initially rapidly decreased and then increased before asymptotically approaching steady state, with the transition time ranging between 53 s (45 W) and 109 s (30 W). Analysis of ground truth ablation zone images indicated time to complete ablation of 230-350 s. The relative prediction error for time to complete ablation derived from the s21 data was in the range of 1.6%-2.3% compared to ground truth. CONCLUSION: We have demonstrated the feasibility of monitoring transient evolution of thermal ablation zones using microwave transmission coefficient measurements in ex vivo tissue. SIGNIFICANCE: The presented technique has potential to contribute towards addressing the clinical need for a method of monitoring evolution of thermal ablation zones.

Multi stage peroxide and activated peroxide bleaching of kenaf bast pulp.

Soda-anthraquinone kenaf bast pulp (12.5 kappa number and 32% ISO brightness) has been bleached with multi stage peroxide bleaching process. Bleaching process was carried out in different sequences of peroxide stage without and with activator (tetraacetylethylenediamine, TAED) to about 80% ISO brightness. Full bleached pulp production with high brightness and viscosity and also, low chemical oxygen demand (COD) and no adsorbable organic halogens (AOX) in effluent are the aims of this study. The effects of temperature, retention time, chemical charges, TAED/peroxide ratio and alkalinity have been studied in order to maximize the brightness gain at the lowest viscosity loss. H(2)O(2) was activated as bleaching agent under milder conditions, such as low alkalinity or low temperature, by TAED activator. Therefore, TAED charge caused to an improvement in viscosity, pulp yield and effluent COD load. Pre-treatment with EDTA for 30 min and in acidic condition gave 2-4% gain in ISO brightness.