RESUMEN
Charge compensation on anionic redox reaction (ARR) has been promising to realize extra capacity beyond transition metal redox in battery cathodes. The practical development of ARR capacity has been hindered by high-valence oxygen instability, particularly at cathode surfaces. However, the direct probe of surface oxygen behavior has been challenging. Here, the electronic states of surface oxygen are investigated by combining mapping of resonant Auger electronic spectroscopy (mRAS) and ambient pressure X-ray photoelectron spectroscopy (APXPS) on a model LiCoO2 cathode. The mRAS verified that no high-valence oxygen can sustain at cathode surfaces, while APXPS proves that cathode electrolyte interphase (CEI) layer evolves and oxidizes upon oxygen gas contact. This work provides valuable insights into the high-valence oxygen degradation mode across the interface. Oxygen stabilization from surface architecture is proven a prerequisite to the practical development of ARR active cathodes.
RESUMEN
The ever-growing demand for portable electronic devices has put forward higher requirements on the energy density of layered LiCoO2 (LCO). The unstable surface structure and side reactions with electrolytes at high voltages (>4.5 V) however hinder its practical applications. Here, considering the high-voltage stability and three-dimensional lithium-ion transport channel of the high-voltage Li-containing spinel (M = Ni and Co) LiMxMn2-xO4, we design a conformal and integral LiNixCoyMn2-x-yO4 spinel coating on the surface of LCO via a sol-gel method. The accurate structure of the coating layer is identified to be a spinel solid solution with gradient element distribution, which compactly covers the LCO particle. The coated LCO exhibits significantly improved cycle performance (86% capacity remained after 100 cycles at 0.5C in 3-4.6 V) and rate performance (150 mAh/g at a high rate of 5C). The characterizations of the electrodes from the bulk to surface suggest that the conformal spinel coating acts as a physical barrier to inhibit the side reactions and stabilize the cathode-electrolyte interface (CEI). In addition, the artificially designed spinel coating layer is well preserved on the surface of LCO after prolonged cycling, preventing the formation of an electrochemically inert Co3O4 phase and ensuring fast lithium transport kinetics. This work provides a facile and effective method for solving the surface problems of LCO operated at high voltages.
RESUMEN
The dissolution of transition-metal (TM) cations into a liquid electrolyte from cathode material, such as Mn ion dissolution from LiMn2O4 (LMO), is detrimental to the cycling performance of Li-ion batteries (LIBs). Though much attention has been paid to this issue, the behavior of Mn dissolution has not been clearly revealed. In this work, by using a refined in situ ultraviolet-visible (UV-vis) spectroscopy technique, we monitored the concentration changes of dissolved Mn ions in liquid electrolyte from LMO at different state of charge (SOC), confirming the maximum dissolution concentration and rate at 4.3 V charged state and Mn2+ as the main species in the electrolyte. Through ab initio molecular dynamics (AIMD) simulations, we revealed that the Mn dissolution process is highly related to surface structure evolution, solvent decomposition, and lithium salt. These results will contribute to understanding TM dissolution mechanisms at working conditions as well as the design of stable cathodes.
RESUMEN
Cathode electrolyte interphase (CEI) layer plays an essential role in determining the electrochemical performance of Li-ion batteries (LIBs), but the detailed mechanisms of CEI formation and evolution are not yet fully understood. With the pursuit of LIBs possessing a high energy density, fundamental investigations on the CEI have become increasingly important. Herein, X-ray photoelectron spectroscopy (XPS) is employed to fingerprint CEI formation and evolution on three of the most prevailing high-voltage cathodes including layered Li1.144Ni0.136Co0.136Mn0.544O2 (LR-NCM), Li2Ru0.5Mn0.5O3 (LRMO), and spinel LiNi0.5Mn1.5O4 (LNMO). The influences of crystal structure, chemical constitution and cut-off voltage on CEI composition are clarified. Among these cathodes, the spinel cathode exhibits the most stable CEI layer throughout the battery cycle. While the layered cathodes based on the 4d transition metal Ru favor CEI formation upon contacting the electrolyte. Most importantly, anionic redox reaction (ARR) activation at high voltages is verified to dominate CEI evolution in subsequent cycles. The distinct CEI behaviors in diverse cathodes can be attributed to a series of entangled processes, including electrolyte/Li salt decomposition, CEI component dissociation and dissociated CEI species redeposition. Based on these findings, rational guidelines are provided for the interface design of high-voltage LIBs.
RESUMEN
The use of anion redox reactions is gaining interest for increasing rechargeable capacities in alkaline ion batteries. Although anion redox coupling of S2- and (S2)2- through dimerization of S-S in sulfides have been studied and reported, an anion redox process through electron hole formation has not been investigated to the best of our knowledge. Here, we report an O3-NaCr2/3Ti1/3S2 cathode that delivers a high reversible capacity of ~186 mAh g-1 (0.95 Na) based on the cation and anion redox process. Various charge compensation mechanisms of the sulfur anionic redox process in layered NaCr2/3Ti1/3S2, which occur through the formation of disulfide-like species, the precipitation of elemental sulfur, S-S dimerization, and especially through the formation of electron holes, are investigated. Direct structural evidence for formation of electron holes and (S2)n- species with shortened S-S distances is obtained. These results provide valuable information for the development of materials based on the anionic redox reaction.
RESUMEN
Serum samples were collected from 2643 suspected cases of paragonimiasis in 2000-2007 from the outpatient departments of the city hospitals and surrounding areas, and the infection rate in the inhabitants, the first and second intermediate hosts, and animal reservoir hosts were investigated in the historical endemic areas. Serum samples were detected and 417 were found antibody positive (15.8%). Among residents in the historical endemic areas, the seropositive rate was 3.1% (46/1462), 2.8% (18/649) and 3.2% (26/813) in males and females respectively (CHI2 = 0.1833, P > 0.05). The infection rate in first intermediate host (snails), second intermediate host (crabs) and animal reservoir hosts was 0.05% (9/ 19,368), 31.1% (15,627/ 50,313) and 11.9% (52/438) respectively. Evidently, natural nidi for Paragonimus spp. still exist in Ningbo City.
Asunto(s)
Paragonimiasis/epidemiología , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Animales , Anticuerpos Antihelmínticos/sangre , Braquiuros/parasitología , Niño , Preescolar , China/epidemiología , Femenino , Humanos , Lactante , Masculino , Persona de Mediana Edad , Paragonimiasis/sangre , Paragonimiasis/parasitología , Recuento de Huevos de Parásitos , Estudios Seroepidemiológicos , Caracoles/parasitologíaRESUMEN
Lithium-rich layered oxides with the capability to realize extraordinary capacity through anodic redox as well as classical cationic redox have spurred extensive attention. However, the oxygen-involving process inevitably leads to instability of the oxygen framework and ultimately lattice oxygen release from the surface, which incurs capacity decline, voltage fading, and poor kinetics. Herein, it is identified that this predicament can be diminished by constructing a spinel Li4 Mn5 O12 coating, which is inherently stable in the lattice framework to prevent oxygen release of the lithium-rich layered oxides at the deep delithiated state. The controlled KMnO4 oxidation strategy ensures uniform and integrated encapsulation of Li4 Mn5 O12 with structural compatibility to the layered core. With this layer suppressing oxygen release, the related phase transformation and catalytic side reaction that preferentially start from the surface are consequently hindered, as evidenced by detailed structural evolution during Li+ extraction/insertion. The heterostructure cathode exhibits highly competitive energy-storage properties including capacity retention of 83.1% after 300 cycles at 0.2 C, good voltage stability, and favorable kinetics. These results highlight the essentiality of oxygen framework stability and effectiveness of this spinel Li4 Mn5 O12 coating strategy in stabilizing the surface of lithium-rich layered oxides against lattice oxygen escaping for designing high-performance cathode materials for high-energy-density lithium-ion batteries.
RESUMEN
As one of the most fascinating cathode candidates for Na-ion batteries (NIBs), P2-type Na layered oxides usually exhibit various single-phase domains accompanied by different Na+/vacancy-ordered superstructures, depending on the Na concentration when explored in a limited electrochemical window. Therefore, their Na+ kinetics and cycling stability at high rates are subjected to these superstructures, incurring obvious voltage plateaus in the electrochemical profiles and insufficient battery performance as cathode materials for NIBs. We show that this problem can be effectively diminished by reasonable structure modulation to construct a completely disordered arrangement of Na-vacancy within Na layers. The combined analysis of scanning transmission electron microscopy, ex situ x-ray absorption spectroscopy, and operando x-ray diffraction experiments, coupled with density functional theory calculations, reveals that Na+/vacancy disordering between the transition metal oxide slabs ensures both fast Na mobility (10-10 to 10-9 cm2 s-1) and a low Na diffusion barrier (170 meV) in P2-type compounds. As a consequence, the designed P2-Na2/3Ni1/3Mn1/3Ti1/3O2 displays extra-long cycle life (83.9% capacity retention after 500 cycles at 1 C) and unprecedented rate capability (77.5% of the initial capacity at a high rate of 20 C). These findings open up a new route to precisely design high-rate cathode materials for rechargeable NIBs.
RESUMEN
Sodium-ion batteries (SIBs) have been considered as potential candidates for stationary energy storage because of the low cost and wide availability of Na sources. O3-type layered oxides have been considered as one of the most promising cathodes for SIBs. However, they commonly show inevitable complicated phase transitions and sluggish kinetics, incurring rapid capacity decline and poor rate capability. Here, a series of sodium-sufficient O3-type NaNi0.5 Mn0.5-x Ti x O2 (0 ≤ x ≤ 0.5) cathodes for SIBs is reported and the mechanisms behind their excellent electrochemical performance are studied in comparison to those of their respective end-members. The combined analysis of in situ X-ray diffraction, ex situ X-ray absorption spectroscopy, and scanning transmission electron microscopy for NaNi0.5 Mn0.2 Ti0.3 O2 reveals that the O3-type phase transforms reversibly into a P3-type phase upon Na+ deintercalation/intercalation. The substitution of Ti for Mn enlarges interslab distance and could restrain the unfavorable and irreversible multiphase transformation in the high voltage regions that is usually observed in O3-type NaNi0.5 Mn0.5 O2 , resulting in improved Na cell performance. This integration of macroscale and atomicscale engineering strategy might open up the modulation of the chemical and physical properties in layered oxides and grasp new insight into the optimal design of high-performance cathode materials for SIBs.
RESUMEN
Li-rich layered materials have been considered as the most promising cathode materials for future high-energy-density lithium-ion batteries. However, they suffer from severe voltage decay upon cycling, which hinders their further commercialization. Here, we report a Li-rich layered material 0.5Li2MnO3·0.5LiNi0.8Co0.1Mn0.1O2 with high nickel content, which exhibits much slower voltage decay during long-term cycling compared to conventional Li-rich materials. The voltage decay after 200 cycles is 201 mV. Combining in situ X-ray diffraction (XRD), ex situ XRD, ex situ X-ray photoelectron spectroscopy, and scanning transmission electron microscopy, we demonstrate that nickel ions act as stabilizing ions to inhibit the Jahn-Teller effect of active Mn(3+) ions, improving d-p hybridization and supporting the layered structure as a pillar. In addition, nickel ions can migrate between the transition-metal layer and the interlayer, thus avoiding the formation of spinel-like structures and consequently mitigating the voltage decay. Our results provide a simple and effective avenue for developing Li-rich layered materials with mitigated voltage decay and a long lifespan, thereby promoting their further application in lithium-ion batteries with high energy density.