Enhanced Seamless Video Fusion: A Convolutional Pyramid-Based 3D Integration Algorithm.

Video fusion aims to synthesize video footage from different sources into a unified, coherent output. It plays a key role in areas such as video editing and special effects production. The challenge is to ensure the quality and naturalness of synthetic video, especially when dealing with footage of different sources and qualities. Researchers continue to strive to optimize algorithms to adapt to a variety of complex application scenarios and improve the effectiveness and applicability of video fusion. We introduce an algorithm based on a convolution pyramid and propose a 3D video fusion algorithm that looks for the potential function closest to the gradient field in the least square sense. The 3D Poisson equation is solved to realize seamless video editing. This algorithm uses a multi-scale method and wavelet transform to approximate linear time. Through numerical optimization, a small core is designed to deal with large target filters, and multi-scale transformation analysis and synthesis are realized. In terms of seamless video fusion, it shows better performance than existing algorithms. Compared with editing multiple 2D images into video after Poisson fusion, the video quality produced by this method is very close, and the computing speed of the video fusion is improved to a certain extent.

Mapping nanocrystal orientations via scanning Laue diffraction microscopy for multi-peak Bragg coherent diffraction imaging.

The recent commissioning of a movable monochromator at the 34-ID-C endstation of the Advanced Photon Source has vastly simplified the collection of Bragg coherent diffraction imaging (BCDI) data from multiple Bragg peaks of sub-micrometre scale samples. Laue patterns arising from the scattering of a polychromatic beam by arbitrarily oriented nanocrystals permit their crystal orientations to be computed, which are then used for locating and collecting several non-co-linear Bragg reflections. The volumetric six-component strain tensor is then constructed by combining the projected displacement fields that are imaged using each of the measured reflections via iterative phase retrieval algorithms. Complications arise when the sample is heterogeneous in composition and/or when multiple grains of a given lattice structure are simultaneously illuminated by the polychromatic beam. Here, a workflow is established for orienting and mapping nanocrystals on a substrate of a different material using scanning Laue diffraction microscopy. The capabilities of the developed algorithms and procedures with both synthetic and experimental data are demonstrated. The robustness is verified by comparing experimental texture maps obtained with Laue diffraction microscopy at the beamline with maps obtained from electron back-scattering diffraction measurements on the same patch of gold nanocrystals. Such tools provide reliable indexing for both isolated and densely distributed nanocrystals, which are challenging to image in three dimensions with other techniques.

Continuous-wave terahertz quantum cascade microlaser arrays operating on various bound states in the continuum.

We report on the continuous-wave (CW) operation of 1D terahertz quantum cascade (THz QC) microlaser arrays working on various bound states in the continuum (BICs). We first created a quasi-BIC state by breaking the inversion symmetry of the microlaser array, which enables flexible control of the radiation efficiency. The optimized multi-periods array exhibits single-mode emission with the maximum output power of 21 mW (at 30 K), and the maximum operation temperature (Tcw) of 45 K. To further increase Tcw, we created a hybrid-BIC state by hybridizing a quasi-BIC generated in a few-periods array and a high-Q surface plasmon polariton mode formed in an unbiased array. The hybridization minimizes the pumping area with no obvious degradation of the threshold current density. The reduced pumping area, together with the discrete distribution of microlasers, significantly decreases the device thermal resistance. Such scheme improves the Tcw up to 79 K with a low beam divergence of 17°×17°, and the output power remains 3.4 mW at 20 K. Our work provides a novel solution to control the output power, the operating temperature, and the beam quality of THz QC lasers in CW mode.

Establishing stereochemical comparability in phosphorothioate oligonucleotides with nuclease P1 digestion coupled with LCMS analysis.

Stereochemical comparability is critical for ensuring manufacturing consistency in therapeutic phosphorothioate oligonucleotides. Currently, analytical methods for this assessment are limited. We hereby report on a novel protocol capable of detecting a stereochemistry change in a single phosphorothioate linkage by employing nuclease P1 digestion of the oligonucleotide with subsequent LCMS analysis of the resulting fragments. The method proves valuable for establishing stereochemical comparability and for ensuring manufacturing consistency of oligonucleotide therapeutics.

Tunable Cherenkov Radiation of Phonon Polaritons in Silver Nanowire/Hexagonal Boron Nitride Heterostructures.

Polaritons in two-dimensional (2D) materials have shown their unique capabilities to concentrate light into deep subwavelength scales. Precise control of the excitation and propagation of 2D polaritons has remained a central challenge for future on-chip nanophotonic devices and circuits. To solve this issue, we exploit Cherenkov radiation, a classic physical phenomenon that occurs when a charged particle moves at a velocity greater than the phase velocity of light in that medium, in low-dimensional material heterostructures. Here, we report an experimental observation of Cherenkov phonon polariton wakes emitted by superluminal one-dimensional plasmon polaritons in a silver nanowire and hexagonal boron nitride heterostructure using near-field infrared nanoscopy. The observed Cherenkov radiation direction and radiation rate exhibit large tunability through varying the excitation frequency. Such tunable Cherenkov phonon polaritons provide opportunities for novel deep subwavelength-scale manipulation of light and nanoscale control of energy flow in low-dimensional material heterostructures.

Amphiphilic Polypeptoids Rupture Vesicle Bilayers To Form Peptoid-Lipid Fragments Effective in Enhancing Hydrophobic Drug Delivery.

Peptoids are highly biocompatible pseudopeptidic polyglycines with designable substituents on the nitrogen atoms. The therapeutic and drug-carrying potential of these materials requires a fundamental understanding of their interactions with lipid bilayers. In this work, we use amphiphilic polypeptoids with up to 100 monomeric units where a significant fraction (26%) of the nitrogen atoms are functionalized with decyl groups (hydrophobes) that insert into the lipid bilayer through the hydrophobic effect. These hydrophobically modified polypeptoids (HMPs) insert their hydrophobes into lipid bilayers creating instabilities that lead to the rupture of vesicles. At low HMP concentrations, such rupture leads to the creation of large fragments which remarkably anchor to intact vesicles through the hydrophobic effect. At high HMP concentrations, all vesicles rupture to smaller HMP-lipid fragments of the order of 10 nm. We show that the technique for such nanoscale polymer-lipid fragments can be exploited to sustain highly hydrophobic drug species in solution. Using the kinase inhibitor, Sorafenib as a model drug, it is shown that HMP-lipid fragments containing the drug can efficiently enter a hepatocellular carcinoma cell line (Huh 7.5), indicating the use of such fragments as drug delivery nanocarriers.

Solution Self-Assemblies of Sequence-Defined Ionic Peptoid Block Copolymers.

A series of amphiphilic ionic peptoid block copolymers where the total number (1 or 3) and position of ionic monomers along the polymer chain are precisely controlled have been synthesized by the submonomer method. Upon dissolution in water at pH = 9, the amphiphilic peptoids self-assemble into small spherical micelles having hydrodynamic radius in ∼5-10 nm range and critical micellar concentration (CMC) in the 0.034-0.094 mg/mL range. Small-angle neutron scattering (SANS) analysis of the micellar solutions revealed unprecedented dependence of the micellar structure on the number and position of ionic monomers along the chain. It was found that the micellar aggregation number ( Nagg) and the micellar radius ( Rm) both increase as the ionic monomer is positioned progressively away from the junction of the hydrophilic and hydrophobic segments along the polymer chain. By defining an ionic monomer position number ( n) as the number of monomers between the junction and the ionic monomer, Nagg exhibited a power law dependence on n with an exponent of ∼1/3 and ∼3/10 for the respective singly and triply charged series. By contrast, Rm exhibited a weaker dependence on the ionic monomer position by a power law relationship with an exponent of ∼1/10 and ∼1/20 for the respective singly and triply charged series. Furthermore, Rm was found to scale with Nagg in a power-law relationship with an exponent of 0.32 for the singly charged series, consistent with a weakly charged ionic star-like polymer model in the unscreened regime. This study demonstrated a unique method to precisely tailor the structure of small spherical micelles based on ionic block copolymers by controlling the sequence and position of the ionic monomer.

A study on the role that quorum sensing play in antibiotic-resistant plasmid conjugative transfer in Escherichia coli.

Horizontal genes transfer (HGT) plays an important role in the dissemination of antibiotic resistance genes (ARGs) in the environment. However, the mechanisms of HGT of ARGs under the influence of antibiotics in sub-MIC remain rarely explored. Moreover, given its collective nature, HGT was considered to be relative to quorum sensing (QS) system. To investigate whether QS has any impact on horizontal gene transfer of ARGs, experiments were conducted to determine the conjugative efficiency of plasmid RP4 on Escherichia coli (E.coli) under the influences of tetracyclines (TCs), quorum sensing autoinducers (AIs) and quorum sensing inhibitors (QSIs). The results indicated that the sub-MIC TCs could facilitate the conjugative transfer of RP4, a process which could be enhanced by AIs but inhibited by QSIs. This study demonstrated the roles that QS played in the dissemination of ARGs, and provided theoretical insights into the mechanism of HGT of ARGs in the environment.

Amphiphilic Polypeptoids Serve as the Connective Glue to Transform Liposomes into Multilamellar Structures with Closely Spaced Bilayers.

We report the ability of hydrophobically modified polypeptoids (HMPs), which are amphiphilic pseudopeptidic macromolecules, to connect across lipid bilayers and thus form layered structures on liposomes. The HMPs are obtained by attaching hydrophobic decyl groups at random points along the polypeptoid backbone. Although native polypeptoids (with no hydrophobes) have no effect on liposomal structure, the HMPs remodel the unilamellar liposomes into structures with comparable diameters but with multiple concentric bilayers. The transition from single-bilayer to multiple-bilayer structures is revealed by small-angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM). The spacing between bilayers is found to be relatively uniform at ∼6.7 nm. We suggest that the amphiphilic nature of the HMPs explains the formation of multibilayered liposomes; i.e., the HMPs insert their hydrophobic tails into adjacent bilayers and thereby serve as the connective glue between bilayers. At higher HMP concentrations, the liposomes are entirely disrupted into much smaller micellelike structures through extensive hydrophobe insertion. Interestingly, these small structures can reattach to fresh unilamellar liposomes and self-assemble to form new two-bilayer liposomes. The two-bilayer liposomes in our study are reminiscent of two-bilayer organelles such as the nucleus in eukaryotic cells. The observations have significance in designing new nanoscale drug delivery carriers with multiple drugs on separate lipid bilayers and extending liposome circulation times with entirely biocompatible materials.

Aggregation of cyclic polypeptoids bearing zwitterionic end-groups with attractive dipole-dipole and solvophobic interactions: a study by small-angle neutron scattering and molecular dynamics simulation.

Aggregation behavior of cyclic polypeptoids bearing zwitterionic end-groups in methanol has been studied using a combination of experimental and simulation techniques. The data from SANS and cryo-TEM indicate that the solution contains small clusters of these cyclic polypeptoids, ranging from a single polypeptoid chain to small oligomers, while the linear counterpart shows no cluster formation. Atomistic molecular dynamics simulations reveal that the driving force for this clustering behavior is due to the interplay between the effective repulsion due to the solvation of the dipoles formed by the charged end-groups in each polypeptoid chain and the attractive forces due to dipole-dipole interactions and the solvophobic effect.

Tuning the Wettability of Halloysite Clay Nanotubes by Surface Carbonization for Optimal Emulsion Stabilization.

The carbonization of hydrophilic particle surfaces provides an effective route for tuning particle wettability in the preparation of particle-stabilized emulsions. The wettability of naturally occurring halloysite clay nanotubes (HNT) is successfully tuned by the selective carbonization of the negatively charged external HNT surface. The positively charge chitosan biopolymer binds to the negatively charged external HNT surface by electrostatic attraction and hydrogen bonding, yielding carbonized halloysite nanotubes (CHNT) on pyrolysis in an inert atmosphere. Relative to the native HNT, the oil emulsification ability of the CHNT at intermediate levels of carbonization is significantly enhanced due to the thermodynamically more favorable attachment of the particles at the oil-water interface. Cryogenic scanning electron microscopy (cryo-SEM) imaging reveals that networks of CHNT attach to the oil-water interface with the particles in a side-on orientation. The concepts advanced here can be extended to other inorganic solids and carbon sources for the optimal design of particle-stabilized emulsions.

Release of surfactant cargo from interfacially-active halloysite clay nanotubes for oil spill remediation.

Naturally occurring halloysite clay nanotubes are effective in stabilizing oil-in-water emulsions and can serve as interfacially-active vehicles for delivering oil spill treating agents. Halloysite nanotubes adsorb at the oil-water interface and stabilize oil-in-water emulsions that are stable for months. Cryo-scanning electron microscopy (Cryo-SEM) imaging of the oil-in-water emulsions shows that these nanotubes assemble in a side-on orientation at the oil-water interface and form networks on the interface through end-to-end linkages. For application in the treatment of marine oil spills, halloysite nanotubes were successfully loaded with surfactants and utilized as an interfacially-active vehicle for the delivery of surfactant cargo. The adsorption of surfactant molecules at the interface serves to lower the interfacial tension while the adsorption of particles provides a steric barrier to drop coalescence. Pendant drop tensiometry was used to characterize the dynamic reduction in interfacial tension resulting from the release of dioctyl sulfosuccinate sodium salt (DOSS) from halloysite nanotubes. At appropriate surfactant compositions and loadings in halloysite nanotubes, the crude oil-saline water interfacial tension is effectively lowered to levels appropriate for the dispersion of oil. This work indicates a novel concept of integrating particle stabilization of emulsions together with the release of chemical surfactants from the particles for the development of an alternative, cheaper, and environmentally-benign technology for oil spill remediation.

Collapse of carbon nanotubes due to local high-pressure from van der Waals encapsulation.

Van der Waals (vdW) assembly of low-dimensional materials has proven the capability of creating structures with on-demand properties. It is predicted that the vdW encapsulation can induce a local high-pressure of a few GPa, which will strongly modify the structure and property of trapped materials. Here, we report on the structural collapse of carbon nanotubes (CNTs) induced by the vdW encapsulation. By simply covering CNTs with a hexagonal boron nitride flake, most of the CNTs (≈77%) convert from a tubular structure to a collapsed flat structure. Regardless of their original diameters, all the collapsed CNTs exhibit a uniform height of ≈0.7 nm, which is roughly the thickness of bilayer graphene. Such structural collapse is further confirmed by Raman spectroscopy, which shows a prominent broadening and blue shift in the Raman G-peak. The vdW encapsulation-induced collapse of CNTs is fully captured by molecular dynamics simulations of the local vdW pressure. Further near-field optical characterization reveals a metal-semiconductor transition in accompany with the CNT structural collapse. Our study provides not only a convenient approach to generate local high-pressure for fundamental research, but also a collapsed-CNT semiconductor for nanoelectronic applications.

Hormetic dose-response of halogenated organic pollutants on Microcystis aeruginosa: Joint toxic action and mechanism.

Quinolones (QNs), dechloranes (DECs), and chlorinated paraffins (CPs) are three kinds of new halogenated organic pollutants (HOPs), which originate from the use of flame retardants, lubricants and pesticides. Since QNs, DECs, and CPs are frequently detected in waters and sediments, it is necessary to investigate the toxic effects of these HOPs with dwelling phytoplankton, especially for cyanobacteria, to explore their potential hormetic effects and contributions to algal blooms. In the present study, we investigate single and joint toxicity of QNs, DECs and CPs on Microcystis aeruginosa (M. aeruginosa), a cyanobacterium that is frequently implicated with algal blooms. The results indicate single QNs and DECs induce marked hormetic effects on the proliferation of M. aeruginosa but CPs do not. The stimulatory effect of hormesis is linked with accelerated replication of DNA, which is considered to stem from the moderate rise in intracellular reactive oxygen species (ROS). Joint toxicity tests reveal that both QNs & CPs mixtures and DECs & CPs mixtures show hormetic effects on M. aeruginosa, but QNs & DECs mixtures show no hormetic effect. QNs & DECs mixtures exhibit synergistic toxic actions, which may be caused by a sharp rise in intracellular ROS simultaneously produced by the agents. Joint toxic actions of both QNs & CPs, and DECs & CPs shift from addition to antagonism as concentration increases, and this shift may mainly depend on the influence of CPs on cell membrane hydrophobicity of M. aeruginosa. This study provides data and toxic mechanisms for the hormetic phenomenon of single and joint HOPs on M. aeruginosa. The hormetic effects of HOPs may benefit the proliferation of M. aeruginosa in the aquatic environment, aggravating the formation of algal blooms. This study also reflects the important role of hormesis in environmental risk assessment of pollutants.

Broadband and photovoltaic THz/IR response in the GaAs-based ratchet photodetector.

High-performance broadband infrared (IR)/terahertz (THz) detection is crucial in many optoelectronic applications. However, the spectral response range of semiconductor-based photodetectors is limited by the bandgaps. This paper proposes a ratchet structure based on the GaAs/AlxGa1-xAs heterojunction, where the quasi-stationary hot hole distribution and intravalence band absorption from light or heavy hole states to the split-off band overcome the bandgap limit, ensuring an ultrabroadband photoresponse from near-IR to THz region (4 to 300 THz). The peak responsivity of the proposed structure can reach 7.3 A/W, which is five orders of magnitude higher than that of the existing broadband photon-type detector. Because of the ratchet effect, the proposed photodetector has a bias-tunable photoresponse characteristic and can operate in the photovoltaic mode with a broad photocurrent spectrum (18 to 300 THz). This work not only demonstrates a broadband photon-type THz/IR photodetector but also provides a method to study the light-responsive ratchet.

Hydrophobe Containing Polypeptoids Complex with Lipids and Induce Fusogenesis of Lipid Vesicles.

The hydrophobic effect of alkyl group insertion into phospholipid bilayers is exploited in modifying and modulating vesicle structure. We show that amphiphilic polypeptoids (peptide mimics) with n-decyl side chains, which we term as hydrophobe-containing polypeptoids (HCPs), can insert the alkyl hydrophobes into the membrane bilayer of phospholipid-based vesicles. Such insertion leads to disruption of the liposomes and the formation of HCP-lipid complexes that are colloidally stable in aqueous solution. Interestingly, when these complexes are added to fresh liposomes, remnant uncomplexed hydrophobes (the n-decyl groups) bridge liposomes and fuse them. The fusion leads to the engulfing of liposomes and the formation of multilayered vesicles. The morphology of the liposome system can be changed from stopping fusion and forming clustered vesicles to the continued formation of multilayered liposomes simply by controlling the amount of the HCP-lipid complex added. The entire procedure occurs in aqueous systems without the addition of any other solvents. There are several implications to these observations including the biological relevance of mimicking fusogenic proteins such as the SNARE proteins and the development of new drug delivery technologies to impact delivery to cell organelles.

A trigger mechanism of herbicides to phytoplankton blooms: From the standpoint of hormesis involving cytochrome b559, reactive oxygen species and nitric oxide.

The cause of phytoplankton blooms has been extensively discussed and largely attributed to favorable external conditions such as nitrogen/phosphorus resources, pH and temperature. Here from the standpoint of hormesis response, we propose that phytoplankton blooms are initiated by stimulatory effects of low concentrations of herbicides as environmental contaminants spread over estuaries and lakes. The experimental results revealed general stimulations by herbicides on Microcystis aeruginosa and Selenastrum capricornutum, with the maximum stimulation in the 30-60% range, depending on the agent and experiment. In parallel with enhancing stimulation, the ratio of HP (high-potential) form to LP (low-potential) form of cytochrome b559 (RHL) was observed decreasing, while intracellular reactive oxygen species (ROS) were observed increasing. We propose that the ROS originated from the thermodynamic transformation of cytochrome b559, enhancing the stimulatory response. Furthermore, the results also proved that thermodynamic states of cytochrome b559 could be modulated by nitric oxide, thus affecting cellular equilibrium of oxidative stress (OS) and correspondingly causing the inhibitory effect of higher concentrations of herbicides on phytoplankton. This suggests that hormesis substantially derives from equilibrium shifting of OS. Moreover, it is reasonable to infer that phytoplankton blooms would be motivated by herbicides or other environmental pollutants. This study provides a new thought into global phytoplankton blooms from a contaminant perspective.

Tetramethylpyrazine alleviates acute kidney injury by inhibiting NLRP3/HIF­1α and apoptosis.

The aim of the present study was to investigate the protective effect and underlying mechanism of tetramethylpyrazine (TMP) on renal ischemia reperfusion injury (RIRI) in rats, which refers to the injury caused by the restoration of blood supply and reperfusion of the kidney after a period of ischemia. Sprague­Dawley rats were randomly divided into a Sham group, renal ischemia­reperfusion (I/R) group and TMP group. TMP hydrochloride (40 mg/kg, 6 h intervals) was given via intraperitoneal injection immediately after reperfusion in the TMP group, after 24 h the kidney tissues were taken for follow­up experiments. Pathological changes in the kidney tissues were observed by periodic acid­Schiff staining. Renal function was assessed by measuring levels of serum creatinine and blood urea nitrogen, and inflammatory cytokines tumor necrosis factor (TNF)­α and interleukin (IL)­6. Renal cell apoptosis was detected by TUNEL­DAPI double staining, mRNA and protein changes were analyzed by reverse transcription­quantitative PCR and western blotting. Cell viability was measured using a CCK­8 assay. It was found that the renal tissues of the sham operation group were notably abnormal, and the renal tissues of the I/R group were damaged, while the renal tissues of the TMP group were less damaged compared with those of the I/R group. Compared with the I/R group, the serum creatinine and blood urea nitrogen levels in the TMP group were low (all P<0.05), levels of inflammatory cytokines TNF­α and IL­6 decreased, the apoptotic rate was low (all P<0.05), and the relative expression levels of nucleotide­oligomerization domain­like receptor 3 (NLRP3) protein and mRNA in renal tissues were low (all P<0.05). The expression levels of hypoxia­inducible factor 1­α and NLRP3 increased after oxygen and glucose deprivation (OGD), and reduced after treatment with OGD and TMP (all P<0.05). It was concluded that TMP can reduce renal injury and improve renal function in RIRI rats, and its mechanism may be related to the reduction of NLRP3 expression in renal tissues.

Time-Dependent Toxicities of Quorum Sensing Inhibitors to Aliivibrio fischeri and Bacillus subtilis.

Quorum sensing inhibitors (QSIs) are being used widely as a promising alternative to antibiotics and drawing attention as potential pollutants. However, the assessment methods of the toxicities of QSIs, including model organism and affecting time, have not been established. To investigate how model organism and acting time impact the toxicities of QSIs, the effect of 4 QSIs to Aliivibrio fischeri and Bacillus subtilis were determined at different exposing time in the present study. The results showed that the toxic effects of QSIs to gram-negative bacteria (A fischeri) and gram-positive bacteria (B subtilis) were different and time dependent. As for A fischeri, QSI (furaneol acetate, FA) merely showed inhibition on the bioluminescence from hours 1 to 2. But from hours 3 to 6, low concentration FA exerted stimulation on the bioluminescence. Then, this stimulation disappeared from hours 7 to 14, and after hour 15 the stimulation appeared again. That is to say, QSIs showed intermittent hormesis effect on the bioluminescence of A fischeri. By contrast, only inhibition was observed in the toxicity test process of QSIs to B subtilis. As exposing time goes, the inhibition weakened gradually when FA was at low concentration regions. What is more, in the present, study toxic mechanisms were also discussed based on model organisms and exposing time. This study demonstrates appreciable impacts of model organism and exposing time on toxicities of QSIs and provides a theoretical basis for risk assessments after QSIs being widely used into the environment.

Broadband THz to NIR up-converter for photon-type THz imaging.

High performance terahertz imaging devices have drawn wide attention due to their significant application in healthcare, security of food and medicine, and nondestructive inspection, as well as national security applications. Here we demonstrate a broadband terahertz photon-type up-conversion imaging device, operating around the liquid helium temperature, based on the gallium arsenide homojunction interfacial workfunction internal photoemission (HIWIP)-detector-LED up-converter and silicon CCD. Such an imaging device achieves broadband response in 4.2-20 THz and can absorb the normal incident light. The peak responsivity is 0.5 AW-1. The light emitting diode leads to a 72.5% external quantum efficiency improvement compared with the one widely used in conventional up-conversion devices. A peak up-conversion efficiency of 1.14 × 10-2 is realized and the optimal noise equivalent power is 29.1 pWHz-1/2. The up-conversion imaging for a 1000 K blackbody pin-hole is demonstrated. This work provides a different imaging scheme in the terahertz band.