RESUMEN
For the first time, dendrimers based on thiacalix[4]arenes bearing imidazolium dendrons on one side and alkyl fragments on another side of the macrocyclic platform and symmetrical dendrimers with four dendrons on both sides were synthesized. Dendrons consist of gallic acid-based branches functionalized with imidazolium and triazolium groups. The physicochemical properties of the dendrimers such as micellar concentration (CMC), size, and solubilization capacity were measured. Novel dendrimers exhibit high binding efficiency with calf thymus DNA (ctDNA) as revealed by fluorescence quenching of the DNA-EtBr complex in the presence of macrocycles. Dendrimers have been used as supports for Pd nanoparticles, which show high catalytic activity for the reduction of nitroaromatic compounds.
RESUMEN
Amorphous polymers currently have a wide range of applications, including the production of amorphous solid dispersions in the pharmaceutical industry. This application requires knowledge of the kinetic parameters of the glass transition process, which are the key to the formation of the end product. In the present work, we have thoroughly investigated the glass transition in the biocompatible polymer polyvinylpyrrolidone as a function of the polymer molecular mass, using differential scanning calorimetry, fast scanning calorimetry, and broadband dielectric spectroscopy. We have determined the dependence of the difference between the isobaric specific heat capacities of the liquid and the glass on the dynamic glass transition temperature, volume, and number of particles included in the cooperatively rearranging regions. A linear dependence between the shift factor from the Frenkel-Kobeko-Reiner equation and the molecular mass of polyvinylpyrrolidone was established. The results of the present work help in choosing the optimal excipient for the development of solid dispersions based on amorphous polymers.
RESUMEN
The first evidence of native cyclodextrins fusion was registered using fast scanning calorimetry (FSC) with heating rates up to 40,000 K s-1. The endothermal effects, detected at low heating rates, correspond to the decomposition processes. Upon the increase of the heating rate the onset of these effects shifts to higher temperatures, reaching a limiting value at high heating rates. The limiting temperatures were identified as the melting points of α-, ß- and γ-cyclodextrins, as the decomposition processes are suppressed at high heating rates. For γ-cyclodextrin the fusion enthalpy was measured. The activation energies of thermal decomposition of cyclodextrins were determined by dependence of the observed thermal effects on heating rates from 4 K min-1 in conventional differential scanning calorimetry to 40,000 K s-1 in FSC. The lower thermal stability and activation energy of decomposition of ß-cyclodextrin than for the other two cyclodextrins were found, which may be explained by preliminary phase transition and chemical reaction without mass loss. The obtained values of fusion parameters of cyclodextrins are needed in theoretical models widely used for prediction of solubility and solution rates and in preparation of cyclodextrin inclusion compounds involving heating.
Asunto(s)
Ciclodextrinas , Ciclodextrinas/química , Rastreo Diferencial de Calorimetría , Calorimetría , Termodinámica , SolubilidadRESUMEN
The key role of water in the formation of cyclo(leucyl-leucyl) organogels was demonstrated. The conditions required for preparation of previously unknown gels with aliphatic hydrocarbons at room temperature were determined. Cyclo(leucyl-leucyl) self-assembles to form different structures depending on the medium used. The molecular organization of gels was studied by the methods of microscopy, spectroscopy and X-ray powder diffractometry. The organogel of cyclo(leucyl-leucyl) can reversibly change volume during the heating/cooling cycle. We showed the possibility of practical application of cyclo(leucyl-leucyl) for water purification. The results obtained give a new insight into the mechanism of gelation with cyclo(dipeptide)-based low-molecular-weight gelators and may be useful for the preparation of new physical gels.
RESUMEN
Thermal treatment of short-chain oligopeptides is able to initiate the process of their self-assembly with the formation of organic nanostructures with unique properties. On the other hand, heating can lead to a chemical reaction with the formation of new substances with specific properties and ability to form structures with different morphology. Therefore, in order to have a desired process, researcher needs to find its temperature range. In the present work, cyclization of L -isoleucyl-L -alanine dipeptide in the solid state upon heating was studied. Kinetic parameters of this reaction were estimated within the approaches of the nonisothermal kinetics. The correlation between side chain structure of dipeptides and temperature of their cyclization in the solid state was found for the first time. This correlation may be used to predict the temperature, at which dipeptide self-assembly changes to chemical reaction. The differences in self-assembly of linear and cyclic dipeptides were demonstrated using atomic force microscopy. The effect of dipeptide concentration in a source solution and an organic solvent used on self-assembly of dipeptides was shown. The new information obtained on the thermal properties and self-assembly of linear and cyclic forms of L -isoleucyl-L -alanine may be useful for the design of new nanomaterials based on oligopeptides, as well as for the synthesis of cyclic oligopeptides.
Asunto(s)
Alanina/química , Dipéptidos/síntesis química , Isoleucina/química , Temperatura , Ciclización , Dipéptidos/química , Cromatografía de Gases y Espectrometría de Masas , Cinética , Conformación MolecularRESUMEN
The self-association and solvation pattern of graphene oxide (GO) in water, ethylene glycol (EG), and their mixtures were analyzed by means of UV/Vis spectrophotometry. A careful analysis of the absorbance dependencies vs. the GO concentration shows that self-association of the GO sheets in EG occurs at higher concentration compared to that in water. It was established that depending on the mixed solvent composition, two different types of the GO solvates are formed. The results of quantum chemical calculations allow one to suggest that in the water-rich compositions, the GO oxygen-containing groups are in direct contact with water molecules while in the glycol-rich media the EG molecules fully substitute water in the GO's first solvation layer.
RESUMEN
The size exclusion of guests by α-cyclodextrin (aCD) in binary host-guest systems was observed to be a key structure-property relationship for the choice of this host as a receptor. For this, vapor sorption isotherms of water and volatile organic compounds were determined using dry aCD, which show an inclusion threshold by sorbate activity corresponding to a phase transition of guest (or water) inclusion. These phase transitions were also characterized using X-ray powder diffractograms. The analysis of these data shows that interaction of aCD with water does not differ much from that with organic compounds that can be included by aCD without water and therefore are water-mimicking as such. The inclusion and hydration Gibbs energies and composition of the saturated host-guest clathrates were determined from sorption isotherms. The Gibbs energies of guest inclusion by solid aCD and its hydration characterize the guest-host and water-host affinity in the solid state. The correlation of the obtained inclusion parameters with that of guest size indicate the ban on the inclusion of volatile hydrophilic organic compounds with more than three carbon atoms and smaller molecules without hydrophilic groups. These data may be used for estimation of the relative ability of more hydrophobic guests to replace water and organic solvents in solid aCD. The observed inclusion of water and small hydrophilic molecules by solid aCD with phase transition gives an alternative insight into the role of water in activating the inclusion of more hydrophobic guests. Furthermore, the results show the extent to which aCD may be preferable in applications using water or other solvents.
RESUMEN
The non-zeolitic behavior of l-leucyl-l-leucine and its self-organization in solid state and from solutions with the formation of different nanostructures are reported. This dipeptide forms porous crystals, but does not exhibit molecular sieve effects typical of classical zeolites and biozeolites. The specific sorption properties of l-leucyl-l-leucine result from a change in its crystal packing from channel-type to layered-type, when binding strong proton acceptors or proton donors of molecular size greater than 18-20 cm3 mol-1. The high sorption capacity of l-leucyl-l-leucine toward dichloromethane results from the self-organization of the dipeptide, by forming nanofibers or web-like structures. The low thermal stability of clathrates of the dipeptide containing large guest molecules and the selectivity of l-leucyl-l-leucine toward alcohols over nitriles can be used to separate organic mixtures such as methanol/n-butanol and methanol/acetonitrile.
Asunto(s)
Dipéptidos/química , Nanofibras/química , Acetonitrilos/química , Alcoholes/química , Hidrocarburos Clorados/química , Enlace de Hidrógeno , Piridinas/química , Temperatura , Agua/químicaRESUMEN
The strong effect of the amino acid sequence in L-alanyl-L-valine and L-valyl-L-alanine on their sorption properties toward organic compounds and water, and the thermal stability of the inclusion compounds of these dipeptides have been found. Generally, L-valyl-L-alanine has a greater sorption capacity for the studied compounds, but the thermal stability of the L-alanyl-L-valine clathrates is higher. Unusual selectivity of L-valyl-L-alanine for vapors of few chloroalkanes was observed. The correlation between the change in the surface morphology of thin film of dipeptides and stoichiometry of their clathrates with organic compounds was found. This discovery may be used to predict the influence of vapors on the morphology of films of short-chain oligopeptides.
Asunto(s)
Compuestos de Anilina/química , Dipéptidos/química , Temperatura , Terpenos/química , Valina/química , Estabilidad de Medicamentos , Volatilización , Agua/químicaRESUMEN
Lyotropic liquid crystals (LLCs) have attracted considerably growing interest in drug delivery applications over the last years. The structure of LLC matrices is complementary to cell membranes and provides an efficient, controlled, and selective release of drugs. In this work, a complex of experimental methods was used to characterize binary LLCs Pluronic P123/DMSO and triple LLC systems Pluronic P123/DMSO/Ibuprofen, which are interesting as transdermal drug delivery systems. Liquid crystalline, thermal, and rheological properties of LLCs were studied. Concentration and temperature areas of the lyomesophase existence were found, and phase transition enthalpies were evaluated. Intermolecular interactions among the components were studied by infrared (IR) spectroscopy. In vitro studies of Ibuprofen (Ibu) release from various LLCs allow differentiation of its release depending on the polymer content. Atomic force microscopy and contact angle methods were used to characterize the surface morphology of the hydrophobic membrane, which was used as a stratum corneum model, and also evaluate the adhesion work of the LLCs. A complex analysis of the results provided by these experimental methods allowed revealing correlations between the phase behavior and rheological characteristics of the LLCs and release kinetics of ibuprofen. The proposed biocompatible systems have considerable potential for a transdermal delivery of bioactive substances.
Asunto(s)
Ibuprofeno , Cristales Líquidos , Poloxaleno , Cristales Líquidos/química , Ibuprofeno/química , Ibuprofeno/administración & dosificación , Poloxaleno/química , Reología , Administración Tópica , Liberación de FármacosRESUMEN
A new principle of quantitative and qualitative analysis of binary organic mixtures is offered, which is based on an ability of calixarene receptor for specific polymorphic transitions related to the composition of the analyzed guest mixture. The ability of tert-butylcalix[6]arene to remember selectively some guests bound from headspace both of pure liquids and their binary mixtures is used. The image of guest mixture remains written in metastable polymorphs of host after partial or complete guest elimination from clathrates. The memory was read using differential scanning calorimetry as the enthalpy of exothermic polymorphic transition of host collapse. This enthalpy monotonously changes with the variation of guests' ratio in mixture, unlike the enthalpies of endothermic pseudopolymorphic transitions of guest release. So, the composition of volatile binary mixture can be estimated using only one receptor and only one its parameter even in absence of preferential binding from a binary mixture of guests. This is an example of a genuine molecular recognition.
Asunto(s)
Calixarenos/análisis , Fenoles/análisis , Estructura MolecularRESUMEN
The reaction of cyclopentaphosphine cyclo-(P5 Ph5 ) (1) with ketones (acetone and cyclooctanone) in the presence of [Mo(CO)4 (cod)] (cod=cycloocta-1,5-diene) led to air-stable trinuclear complexes in which the bis-phosphanido ligands (PPh-PPh-PPh-PPh-CMe2 O-PPh)2- (complex 2) and (PPh-PPh-PPh-PPh-C(CH2 )7 O-PPh)2- (complex 3) bridge a Mo(CO)3 -Mo(CO)3 unit. This extends the reaction of 1 with transition metal carbonyl complexes to further substrates and represents the first examples of insertion of carbonyl compounds into the P-P bond of cyclic oligophosphorus compounds. Complexes 2 and 3 have been characterized by 31 P NMR spectroscopy and single crystal X-ray diffraction. Furthermore, the thermal properties of the obtained complexes have been studied by differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC).
RESUMEN
The ability of highly ordered tripeptide structures to keep or change their morphology in contact with organic vapors was studied. A thin film of tripeptide L-leucyl-L-leucyl-L-leucine (LLL) was prepared having microcrystals and nanocrystals on its surface, which are stable upon vacuum drying but become objects of selective morphology change after a contact with vapors of organic solvents. Fine separate LLL crystals and their agglomerates of submicron and larger dimensions were observed by atomic force microscopy and scanning electron microscopy. After saturation with guest vapors, these crystals can remain intact or change their morphology with the increase in size or complete destruction depending on the guest molecular structure. The crystals completely lose their shape after the binding of pyridine vapors. The other studied guests produce much smaller transformations or have no effect on crystal morphology despite being sorbed by solid LLL, which was shown using quartz crystal microbalance sensor. The observed size-exclusion effect for guest sorption by LLL was found to be broken by the same guests that can change the initial crystal shape. This helps to explain the morphology changes of LLL crystals after the guest sorption and release.
Asunto(s)
Gases/química , Leucina/química , Oligopéptidos/química , Vapor , Algoritmos , Cristalización , Enlace de Hidrógeno , Microscopía de Fuerza Atómica , Compuestos Orgánicos/química , Estructura Cuaternaria de Proteína , Tecnicas de Microbalanza del Cristal de Cuarzo , Propiedades de SuperficieRESUMEN
The crystal nucleation and overall crystallization kinetics of cross-linked poly(ε-caprolactone) was studied experimentally by fast scanning calorimetry in a wide temperature range. With an increasing degree of cross-linking, both the nucleation and crystallization half-times increase. Concurrently, the glass transition range shifts to higher temperatures. In contrast, the temperatures of the maximum nucleation and the overall crystallization rates remain the same, independent of the degree of cross-linking. The cold crystallization peak temperature generally increases as a function of heating rate, reaching an asymptotic value near the temperature of the maximum growth rate. A theoretical interpretation of these results is given in terms of classical nucleation theory. In addition, it is shown that the average distance between the nearest cross-links is smaller than the estimated lamellae thickness, which indicates the inclusion of cross-links in the crystalline phase of the polymer.
RESUMEN
Synthetic organic 2D materials are attracting careful attention of researchers due to their excellent functionality in various applications, including storage batteries, catalysis, thermoelectricity, advanced electronics, superconductors, optoelectronics, etc. In this work, thiacalix[4]arene derivatives functionalized by geranyl fragments at the lower rim in cone and 1,3-alternate conformations, that are capable of controlled self-assembly in a 2D nanostructures were synthesized. X-ray diffraction analysis showed the formation of 2D monomolecular-layer nanosheets from synthesized thiacalix[4]arenes, the distance between which depends on the stereoisomer used. It was established by DSC, FSC, and PXRD methods that the obtained macrocycles are capable of forming different crystalline polymorphs, moreover dimethyl sulphoxide (DMSO) is contributing to the formation of a more stable polymorph for cone stereoisomer. The obtained crystalline 2D materials based on synthesized thiacalix[4]arenes can find application in material science and medicine for the development of modern pharmaceuticals and new generation materials.
RESUMEN
The formation and decomposition of inclusion compounds with a solid-solid phase transition may be very selective to the guest molecular structure. This selectivity may function in essentially different ways than defined by the classical concept of molecular recognition, which implies the preferential binding of complementary molecules. Solid inclusion compounds may take part as an initial or/and final state in several processes of different types summarized in this review, which selectivity is boosted by cooperativity of participating molecular crystals. Some of these processes resemble switching electronic devices and can be called smart giving practically absolute molecular recognition.
RESUMEN
Hydration history was found to control the inclusion capacity of α-cyclodextrin (aCD) for volatile organic guests, so that its level may be switched from zero to the stoichiometric value and back by the variation of aCD hydration/dehydration order and direction. Such variation of the inclusion capacity is caused by the balance of two water roles: the activation of guest inclusion and guest/water competition. These observed concurrent roles and the cooperativity of guest inclusion and hydration make possible the smart tuning of the guest inclusion by the subtle change of preparation procedure. Depending on the hydration history, aCD was shown to form hydrates with the same water contents but different packing types and different kinetics of dehydration, which correlates with their different inclusion capacities for organic guests. This correlation reveals how the "high-energy" and "low-energy" water works in the guest inclusion by aCD, which may be relevant for other cyclodextrins and hydrophilic receptors of biomimetic and biological natures. The results can help to rationalize the technologies of producing various inclusion compounds of cyclodextrins.
RESUMEN
The parameters of stability, guest binding reversibility, and Gibbs energy of guest inclusion were determined for clathrates of adamantylcalix[4]arene (1). These data provide a new insight into the structure-property relationships in vapor sensor applications of clathrate-forming hosts. A thin layer of 1, used in the quartz microbalance (QCM) sensor, demonstrates a selectivity for organic vapors, which depends on the regeneration technique after the guest binding. Complete regeneration of 1 on the sensor surface was reached through the exchange of bound guest with ethanol vapor, which forms an unstable clathrate with 1. The efficiency of the used regeneration technique was proved by comparing the QCM data with the isotherms of guest vapor sorption by guest-free host 1 and with the data of simultaneous thermogravimetry and differential scanning calorimetry for the saturated clathrates of 1. In sensor, the extent of host regeneration without guest exchange depends on the guest molecular structure. This extent, or guest-binding reversibility parameter, being determined in a combination with the sensor responses of completely regenerated 1 to guest vapors, increases the recognition capability of single sensor device. Using this technique, 13 of 15 studied guests were discriminated. The structural hints on the suitable sensor properties of 1 were found in the determined X-ray monocrystal data for clathrate of this host with toluene.
RESUMEN
Thermal treatment of oligopeptides is one of the methods for synthesis of organic nanostructures. However, heating may lead not only to self-assembly of the initial molecules, but also to chemical reactions resulting in the formation of new unexpected nanostructures or change in the properties of the existing ones. In the present work, the reaction of cyclization of dipeptide l-leucyl-l-leucine in solid state under heating was studied. The change in morphology of dipeptide thin film and formation of nanostructures after heating was visualized using atomic force microscopy. This method also was used for demonstration of differences in self-assembly of linear and cyclic dipeptides. The chemical structure of reaction product was characterized by NMR spectrometry, FTIR spectroscopy and GC-MS analysis. Kinetic parameters of cyclization were estimated within the approaches of the nonisothermal kinetics ("model-free" kinetics and linear regression methods for detection of topochemical equation). The results of present work are useful for explanation the changes in the properties of nanostructures based on short-chain oligopeptides, notably leucyl-leucine, after thermal treatment, as well as for the synthesis of cyclic oligopeptides.
Asunto(s)
Dipéptidos/química , Sustancias Macromoleculares/química , Ciclización , Calefacción , Enlace de Hidrógeno , Cinética , Propiedades de SuperficieRESUMEN
A lot of pharmaceutical substances have a poor solubility that limits their absorption and distribution to the targeted sites to elicit the desired action without causing untoward effects on healthy cells or tissues. For such drugs, new modes of delivery have to be developed for efficient and effective delivery of the drug to the target site. Formation of magnetically active solid dispersion of such drugs could be a useful approach to addressing this problem because they combine targeted delivery and good solubility. In this work, the distribution of superparamagnetic nanoparticles in the solid dispersion of polyethylene glycol with average molecular weight 950-1050 g/mol and phenacetin was studied using atomic force and magnetic force microscopy. The distribution of nanoparticles was found to be uniform in studied composites. Magnetically active solid dispersions may find application in the production of the capsulated drug delivery systems with enhanced solubility parameters.