Bioactive immunostimulants as health-promoting feed additives in aquaculture: A review.

Bioactive immunostimulants could be derived from different sources like plants, animals, microbes, algae, yeast, etc. Bioactive immunostimulants are the most significant role to enhance aquatic production, as well as the cost of this method, which is effective, non-toxic, and environment-friendly. These immunostimulants are supportive to increase the immune system, growth, antioxidant, anti-inflammatory, and disease resistance of aquatic animals' health and also improve aquatic animal feed. Diseases are mainly targeted to the immune system of aquatic organisms in such a way that different processes of bioactive immunostimulants progress are considered imperative techniques for the development of aquaculture production. Communicable infections are the main problem for aquaculture, while the mortality and morbidity connected with some outbreaks significantly limit the productivity of some sectors. Aquaculture is considered the mainly developing food production sector globally. Protein insists is an important issue in human nutrition. Aquaculture has been an exercise for thousands of years, and it has now surpassed capture fisheries as the most vital source of seafood in the world. Limited study reports are available to focal point on bioactive immunostimulants in aquaculture applications. This review report provides information on the nutritional administration of bioactive immunostimulants, their types, functions, and beneficial impacts on aquatic animals' health as well as for the feed quality development in the aquaculture industry. The scope of this review combined to afford various kinds of natural derived bioactive molecules utilization and their beneficial effects in aquaculture applications.

Water Activity Prediction in Sugar and Polyol Systems Using Theoretical Molecular Descriptors.

Water activity is a key factor in the development of pharmaceutical, cosmetic, and food products. In aqueous solutions of nonelectrolytes, the Norrish model provides a simple and effective way to evaluate this quantity. However, it contains a parameter, known as the Norrish constant, that must be estimated from experimental data. In this study, a new strategy is proposed for the prediction of water activity in the absence of experimental information, based on the use of theoretical molecular descriptors for characterizing the effects of a solute. This approach was applied to the evaluation of water activity in the presence of sugars (glucose, fructose, xylose, sucrose) and polyols (sorbitol, xylitol, glycerol, erythritol). The use of two descriptors related to the constitutional and connectivity properties of the solutes was first investigated. Subsequently, a new theoretical descriptor, named the global information index (G), was developed. By using this index, the water activity curves in the binary systems were reconstructed. The positive results obtained support the proposed strategy, as well as the possibility of including, in a single information index, the main molecular features of a solute that determine its effects on water activity.

Microorganisms: A Potential Source of Bioactive Molecules for Antioxidant Applications.

Oxidative stress originates from an elevated intracellular level of free oxygen radicals that cause lipid peroxidation, protein denaturation, DNA hydroxylation, and apoptosis, ultimately impairing cell viability. Antioxidants scavenge free radicals and reduce oxidative stress, which further helps to prevent cellular damage. Medicinal plants, fruits, and spices are the primary sources of antioxidants from time immemorial. In contrast to plants, microorganisms can be used as a source of antioxidants with the advantage of fast growth under controlled conditions. Further, microbe-based antioxidants are nontoxic, noncarcinogenic, and biodegradable as compared to synthetic antioxidants. The present review aims to summarize the current state of the research on the antioxidant activity of microorganisms including actinomycetes, bacteria, fungi, protozoa, microalgae, and yeast, which produce a variety of antioxidant compounds, i.e., carotenoids, polyphenols, vitamins, and sterol, etc. Special emphasis is given to the mechanisms and signaling pathways followed by antioxidants to scavenge Reactive Oxygen Species (ROS), especially for those antioxidant compounds that have been scarcely investigated so far.

Enhanced Lycopene Extraction from Tomato Peels by Optimized Mixed-Polarity Solvent Mixtures.

Mounting evidence from clinical and epidemiological studies suggests that lycopene, the most abundant carotenoid in tomatoes, may be beneficial in the prevention or treatment of some important diseases. Ripe tomato peels are the richest source of lycopene, but the use of conventional solvent extraction methods without pretreatment of the plant material results in very poor recovery. The reason lies in the localization of lycopene in the plant tissue and the low permeability of the latter to solvent molecules. In this paper, a mixture design procedure was used to formulate solvent mixtures allowing the recovery of lycopene from non-pretreated tomato peels. Two ternary systems were investigated: (a) n-hexane-ethanol-acetone and (b) ethyl lactate-ethanol-acetone. Optimization of the ternary mixture composition led to a recovery of over 90% of the lycopene present in the peels. The high extraction efficiency was explained in terms of lycopene affinity combined with the ability to swell the plant material. A tomato oleoresin with high antioxidant activity and a lycopene content of about 13% (w/w) was also produced. Overall, the results indicate that highly effective solvents for direct recovery of lycopene from tomato peels can be easily prepared by a mixture design approach.

Degradation and antibiotic activity reduction of chloramphenicol in aqueous solution by UV/H2O2 process.

The efficacy of the UV/H2O2 process to degrade the antibiotic chloramphenicol (CHL) was investigated at 20 °C using a low-pressure mercury lamp as UV source. A preliminary analysis of CHL degradation showed that the process followed apparent first-order kinetics and that an optimum H2O2 concentration existed for the degradation rate. The first-order rate constant was used as the response variable and its dependence on initial CHL and H2O2 concentrations, UV light intensity and reaction time was investigated by a central composite design based on the response surface methodology. Analysis of response surface plots revealed a large positive effect of radiation intensity, a negative effect of CHL concentration and that there was a region of H2O2 concentration leading to maximum CHL degradation. CHL solutions submitted to the UV/H2O2 process were characterized by TOC and their activity against Escherichia coli and Staphylococcus aureus was assessed. No residual antibiotic activity was detected, even at CHL concentrations higher than those used in the designed experiments. Overall, the obtained results strongly support the possibility of reducing the risks associated with the release of CHL into the environment, including the spread of antibiotic resistance, by the UV/H2O2 process.

Microalgae: A potential bioagent for treatment of emerging contaminants from domestic wastewater.

Water crisis around the world leads to a growing interest in emerging contaminants (ECs) that can affect human health and the environment. Research showed that thousands of compounds from domestic consumers, such as endocrine disrupting chemicals (EDCs), personal care products (PCPs), and pharmaceuticals active compounds (PhAcs), could be found in wastewater in concentration mostly from ng L-1 to µg L-1. However, generally, wastewater treatment plants (WWTPs) are not designed to remove these ECs from wastewater to their discharge levels. Scientists are looking for economically feasible biotreatment options enabling the complete removal of ECs before discharge. Microalgae cultivation in domestic wastewater is likely a feasible approach for removing emerging contaminants and simultaneously removing any residual organic nutrients. Microalgal growth rate and contaminants removal efficiency could be affected by various factors, including light intensity, CO2 addition, presence of different nutrients, etc., and these parameters could greatly help make microalgae treatment more efficient. Furthermore, the algal biomass harvests could be repurposed to produce various bulk chemicals such as sustainable aviation fuel, biofuel, bioplastic, and biochar; this could significantly enhance the economic viability. Therefore, this review summarizes the microalgae-based bioprocess and their mechanisms for removing different ECs from different wastewaters and highlights the different strategies to improve the ECs removal efficiency. Furthermore, this review shows the role of different ECs in biomass profile and the relevance of using ECs-treated microalgae biomass to produce green products, as well as highlights the challenges and future research recommendations.

Response surface methodology (RSM) analysis of photodegradation of sulfonated diazo dye Reactive Green 19 by UV/H2O2 process.

A central composite design was used to investigate the influence of the main process parameters on the degradation of Reactive Green 19 (RG19) azo dye by the UV/H2O2 treatment. The combined use of UV radiation and H2O2 resulted in the decolorization and dearomatization of the dye. They were monitored by measuring the spectral changes occurring, respectively, in the visible and UV regions of the dye spectrum. RG19 degradation was found to be practically complete over a time of 15-60 min, for decolorization, and 50-200 min, for dearomatization, depending on the applied conditions. Both processes followed apparent first-order kinetics. The associated rate constants were used as the response variables and their dependence on initial dye and H2O2 concentrations, pH and reaction time was investigated by the response surface methodology. Response surface plots for the decolorization and dearomatization processes were very similar in shape. For both processes, the initial dye and H2O2 concentrations were the key factors controlling dye degradation.

Enhanced antibacterial and anti-quorum sensing activities of triclosan by complexation with modified ß-cyclodextrins.

Triclosan (TCS), an antimicrobial agent widely used in consumer and medical products, was complexed with 2-hydroxypropyl-ß-cyclodextrin (HPßCD) and methyl-ß-cyclodextrin (MßCD). Phase-solubility studies indicated that inclusion complexes of 1:1 stoichiometry were formed and allowed estimation of the associated equilibrium constants and free-energy changes. At the highest cyclodextrin concentrations investigated, an almost 20-fold increase in the apparent water solubility of TCS was determined. Susceptibility tests against Escherichia coli and Staphylococcus aureus showed that the TCS-HPßCD and TCS-MßCD complexes exhibited antibacterial properties higher than those of uncomplexed TCS. The two complexes were also found capable of interfering with cell-to-cell communication mechanisms in the C. violaceum model system relying on N-acylhomoserine lactone autoinducers. The inhibitory activity of TCS increased significantly upon inclusion of the drug in HPßCD or MßCD, with small differences between the two CDs. The results obtained suggest that the investigated complexes could be used for treating infections caused by TCS-susceptible pathogens or for preventing biofilm formation on indwelling medical devices such as catheters, stents and orthopedic implants.

Microbial Synthesis of Lactic Acid from Cotton Stalk for Polylactic Acid Production.

Cotton stalk, a waste product in agriculture, serves as a beneficial, low-cost material as a medium for microbial synthesis of lactic acid as desired for polylactic acid synthesis. Cotton stalk was used as a substrate for microbial lactic acid synthesis, and a novel strain of Lactococcus cremoris was reported to synthesize 51.4 g/L lactic acid using cellulose recovered from the cotton stalk. In total, 18 Lactobacillus isolates were isolated from kitchen waste, soil, sugarcane waste, and raw milk samples screened for maximum lactic acid production. It was found that one of the Lactococcus cremoris isolates was found to synthesize maximum lactic acid at a concentration of 51.4 g/L lactic acid in the hydrolysate prepared from cotton stalk. The upstream process parameters included 10% inoculum size, hydrolysate containing reducing sugars 74.23 g/L, temperature 37 °C, agitation 220 rpm, production age 24 h. Only the racemic (50:50) mixture of D-LA and L-LA (i.e., D/L-LA) is produced during the chemical synthesis of lactic acid, which is undesirable for the food, beverage, pharmaceutical, and biomedical industries because only the L-form is digestible and is not suitable for biopolymer, i.e., PLA-based industry where high optically purified lactic acid is required. Furthermore, polylactic acid was synthesized through direct polycondensation methods using various catalysts such as chitosan, YSZ, and Sb2O3. PLA is biocompatible and biodegradable in nature (its blends and biocomposites), supporting a low-carbon and circular bioeconomy.

Impact of Biomass Drying Process on the Extraction Efficiency of C-Phycoerythrin.

Drying the biomass produced is one of the critical steps to avoid cell degradation; however, its high energy cost is a significant technological barrier to improving this type of bioprocess's technical and economic feasibility. This work explores the impact of the biomass drying method of a strain of Potamosiphon sp. on the extraction efficiency of a phycoerythrin-rich protein extract. To achieve the above, the effect of time (12-24 h), temperature (40-70 °C), and drying method (convection oven and dehydrator) were determined using an I-best design with a response surface. According to the statistical results, the factors that most influence the extraction and purity of phycoerythrin are temperature and moisture removal by dehydration. The latter demonstrates that gentle drying of the biomass allows removing the most significant amount of moisture from the biomass without affecting the concentration or quality of temperature-sensitive proteins.

Bioplastic production in terms of life cycle assessment: A state-of-the-art review.

The current transition to sustainability and the circular economy can be viewed as a socio-technical response to environmental impacts and the need to enhance the overall performance of the linear production and consumption paradigm. The concept of biowaste refineries as a feasible alternative to petroleum refineries has gained popularity. Biowaste has become an important raw material source for developing bioproducts and biofuels. Therefore, effective environmental biowaste management systems for the production of bioproducts and biofuels are crucial and can be employed as pillars of a circular economy. Bioplastics, typically plastics manufactured from bio-based polymers, stand to contribute to more sustainable commercial plastic life cycles as part of a circular economy in which virgin polymers are made from renewable or recycled raw materials. Various frameworks and strategies are utilized to model and illustrate additional patterns in fossil fuel and bioplastic feedstock prices for various governments' long-term policies. This review paper highlights the harmful impacts of fossil-based plastic on the environment and human health, as well as the mass need for eco-friendly alternatives such as biodegradable bioplastics. Utilizing new types of bioplastics derived from renewable resources (e.g., biowastes, agricultural wastes, or microalgae) and choosing the appropriate end-of-life option (e.g., anaerobic digestion) may be the right direction to ensure the sustainability of bioplastic production. Clear regulation and financial incentives are still required to scale from niche polymers to large-scale bioplastic market applications with a truly sustainable impact.

Green Synthesis of Silver Nanoparticles Using Spent Coffee Ground Extracts: Process Modelling and Optimization.

Large amounts of spent coffee grounds (SCGs) are produced annually worldwide. SCGs contain high levels of phenolics and other bioactive compounds that make them a potential source of reducing and stabilizing agents for the synthesis of metal nanoparticles. This study investigates the use of SCG extracts as a green strategy to produce silver nanoparticles (AgNPs). SCG extracts were obtained using aqueous ethanol as the solvent and then contacted with a silver nitrate solution under the selected conditions. A central composite design coupled with response surface methodology was used to evaluate the effects of solvent composition (C = 30-70% v/v), silver-to-phenolic ratio (R = 3-7 mol/mol), temperature (T = 25-55 °C) and pH (10-12) on the production of AgNPs. Characterization of AgNPs by DLS, TEM and XRD techniques showed that they were highly crystalline with a narrow size distribution. Under optimal reaction conditions, AgNPs with an average size of about 10 nm and a zeta potential of -30.5 to -20.7 mV were obtained. Overall, the results of this study indicate that SCGs are a promising material for the green synthesis of small-sized and stable AgNPs.

Comparison of sunlight-AOPs for levofloxacin removal: kinetics, transformation products, and toxicity assay on Escherichia coli and Micrococcus flavus.

Levofloxacin (LFX) is a widely used antibiotic medication. Persistent traces of LFX in water and wastewater may induce bacterial resistance. Photon-driven advanced oxidation processes (AOPs) can assist in attaining complete abatement of LFX for environmental protection. This work benchmarks different solar AOPs based on hydroxyl radical (OH•) and sulphate radical (SO4•-) chemistry. Other oxidant precursors, as radical sources, were used to selectively control the generation of either hydroxyl radical (i.e., H2O2), sulphate radical (i.e., peroxydisulphate (PDS)), or a controlled mixture ratio of both OH•/SO4•- (i.e., peroxymonosulphate (PMS)). The influence of pH on degradation performance was evaluated using unbuffered and buffered solutions. Simulated irradiation/PMS process exhibited a strong pH-dependence attaining partial degradation of ca. 56% at pH 5 up to complete degradation at pH 7. Despite the similitudes on the abatement of target pollutant LFX in pristine solutions, only simulated irradiation/PDS treatment achieved effective abatement of LFX in wastewater samples given the higher selectivity of SO4•-. Toxicity tests were conducted with Escherichia coli (LMG2092) and Micrococcus flavus (DSM1790), demonstrating successful inhibition of the antibiotic character of polluted waters, which would contribute to preventing the development of resistant bacterial strains. Finally, a degradative pathway was suggested from the by-products and intermediates identified by LC-MS. Results demonstrate that the degradation of specific functional groups (i.e., piperazine ring) is associated with the loss of antibacterial character of the molecule.

Enhancement of Phycobiliprotein Accumulation in Thermotolerant Oscillatoria sp. through Media Optimization.

Phycobiliproteins (PBPs) are a group of brilliant pigment proteins found in cyanobacteria and red algae; their synthesis and accumulation depend on several factors such as the type of strain employed, nutrient concentration, light intensity, light regimes, and others. This study evaluates the effect of macronutrients (citrate buffer, NaNO3, K2HPO4, MgSO4, CaCl2, Na2CO3, and EDTA) and the concentration of trace metals in BG-11 media on the accumulation of PBPs in a thermotolerant strain of Oscillatoria sp. The strain was grown in BG-11 media at 28 °C with a light:dark cycle of 12:12 h at 100 µmol m-2 s-1 for 15 days, and the effect of nutrients was evaluated using a Plackett-Burman Design followed by optimization using a response surface methodology. Results from the concentration of trace metals show that it can be reduced up to half-strength in its initial concentration without affecting both biomass and PBPs. Results from the Plackett-Burman Design revealed that only NaNO3, Na2CO3, and K2HPO4 show a significant increase in PBP production. Optimization employed a central Non-Factorial Response Surface Design with three levels and four factors (34) using NaNO3, Na2CO3, K2HPO4, and trace metals as variables, while the other components of BG-11 media (citrate buffer, MgSO4, CaCl2, and EDTA) were used in half of their initial concentration. Results from the optimization show that interaction between Na2CO3 and K2HPO4 highly increased PBPs' concentration, with values of 15.21, 3.95, and 1.89 (% w/w), respectively. These results demonstrate that identifying and adjusting the concentration of critical nutrients can increase the concentration of PBPs up to two times for phycocyanin and allophycocyanin while four times for phycoerythrin. Finally, the reduction in non-key nutrients' concentration will reduce the production costs of colorants at an industrial scale and increase the sustainability of the process.

Economic Evaluation and Techno-Economic Sensitivity Analysis of a Mass Integrated Shrimp Biorefinery in North Colombia.

The high freshwater consumption requirements in shrimp biorefinery approaches represents one of the major drawbacks of implementing these technologies within the shrimp processing industry. This also affects the costs associated with the plant operation, and consequently, the overall economic performance of the project. The application of mass integration tools such as water pinch analysis can reduce frewshwater consumption by up to 80%, contributing to shrimp biorefinery sustainability. In this work, the economic evaluation and the techno-economic sensitivity analysis for a mass integrated approach for shrimp biorefinery were performed to determine the economic feasibility of the project when located in the North-Colombia region and to identify the critical techno-economic variables affecting the profitability of the process. The integrated approach designed to process 4113.09 tons of fresh shrimp in Colombia reaches a return on investment (%ROI) at 65.88% and a net present value (NPV) at 10.40 MM USD. The process supports decreases of up to 28% in capacity of production and increases of 12% and 11% in the cost of raw materials and variable operating costs without incurring losses, respectively. These findings suggest that the proposed design of the water recycling network coupled to a shrimp biorefinery approach is attractive from an economic point of view.

Effect of an enzymatic treatment with cellulase and mannanase on the structural properties of Nannochloropsis microalgae.

The effects of an enzymatic treatment with cellulase and mannanase on the properties of marine microalgae Nannochloropsis sp. were investigated. The combined use of these enzymes synergistically promoted the recovery of lipids from the microalgae, increasing the extraction yield from 40.8 to over 73%. Untreated and enzymatically treated microalgae were characterized by chemical analysis and by TGA/DTG, FTIR, XRD and SEM. Significant changes were observed in the chemical composition and thermal behavior of the microalgae. The enzymatic treatment also resulted in an increase of the crystalline-to-amorphous cellulose ratio. SEM images revealed dramatic changes in cell morphology, extensive cell damage and release of intracellular material. Overall, the results obtained indicate that the enzymes used are capable of disrupting the microalgal cell wall and that a combination of common analytical techniques can be used to assess the enzyme-induced damage.

Effect of Different Compatibilizers on Sustainable Composites Based on a PHBV/PBAT Matrix Filled with Coffee Silverskin.

This work investigates the feasibility of using coffee silverskin (CSS), one of the most abundant coffee waste products, as a reinforcing agent in biopolymer-based composites. The effect of using two compatibilizers, a maleinized linseed oil (MLO) and a traditional silane (APTES, (3-aminopropyl)triethoxysilane), on mechanical and thermal behavior of sustainable composites based on a poly(butylene adipate-co-terephthalate/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) PBAT/PHBV blend filled with coffee silverskin, in both the as-received state and after the extraction of antioxidants, was studied. Thermal (by differential scanning calorimetry), mechanical (by tensile testing), and morphological properties (by scanning electron microscopy) of injection molded biocomposites at three different weight contents (10, 20, and 30 wt %) were considered and discussed as a function of compatibilizer type. The effects of extraction procedure and silane treatment on surface properties of CSS were investigated by infrared spectroscopy. Obtained results confirmed that extracted CSS and silane-treated CSS provided the best combination of resistance properties and ductility, while MLO provided a limited compatibilization effect with CSS, due to the reduced amount of hydroxyl groups on CSS after extraction, suggesting that the effects of silane modification were more significant than the introduction of plasticizing agent.

UHPLC-PDA-ESI-TOF/MS metabolic profiling and antioxidant capacity of arabica and robusta coffee silverskin: Antioxidants vs phytotoxins.

A deeper knowledge of the chemical composition of coffee silverskin (CS) is needed due to the growing interest in its use as a food additive or an ingredient of dietary supplements. Accordingly, the aim of this paper was to investigate the metabolic profile of aqueous extracts of two varieties of CS, Coffee arabica (CS-A), Coffee canephora var. robusta (CS-R) and of a blend of the two (CS-b) and to compare it to the profile of Coffee arabica green coffee (GC). Chlorogenic acids, caffeine, furokauranes, and atractyligenins, phytotoxins not previously detected in CS, were either identified or tentatively assigned. An unknown compound, presumably a carboxyatractyligenin glycoside was detected only in GC. Caffeine and chlorogenic acids were quantified while the content of furokauranes and atractyligens was estimated. GC and CS were also characterized in terms of total polyphenols and antioxidant capacity. Differences in the metabolites distribution, polyphenols and antioxidant capacity in GC and CS were detailed.

Artichoke (Cynara cardunculus L. var. scolymus) waste as a natural source of carbonyl trapping and antiglycative agents.

The role of polyphenolic compounds extractable from artichoke solid wastes in the formation of advanced glycation end products (AGEs) was studied. Outer bracts and stems were extracted using different water-ethanol mixtures and HPLC-DAD analyses indicated aqueous and hydro-alcoholic 20:80 stem extracts as the richest in polyphenols. The samples were characterized in their phenolic composition (using mass spectrometry) and antioxidant capacity. Antiglycative capacity was evaluated by in vitro BSA-sugars (glucose, fructose, and ribose) and BSA-methylglyoxal (MGO) tests, formation of Amadori products assay, direct glyoxal (GO) and MGO trapping capacity. Results indicated both extracts as effective inhibitors of fructosamine formation and antiglycative agents. In particular, aqueous extract showed the best activity in the systems containing glucose and fructose, differently from ethanolic extract, that was demonstrated able to better inhibit AGEs formation when ribose or MGO act as precursors. Ethanolic extract was also shown to be able to trap MGO and GO, with efficiency increasing after 24hours of incubation time. These activities are partially correlated with the antioxidant effect of the extract, as demonstrated by the scavenger capacity against ABTS cation and DPPH stable radicals; this relationship is evident when the model system, containing protein incubated with ribose or MGO, is considered. The different activities of the tested extracts could probably be ascribed to the different composition in chlorogenic acids (CQAs), being aqueous extract richer in 1-CQA, 3-CQA, and 1,3-di-CQA, and ethanolic extract in 5-CQA, caffeic acid, 1,5-di-CQA. These findings support further investigations to study the stability of the different CQAs in simil-physiological conditions and the feasibility of artichoke waste as antiglycative agents in food or pharmacological preparations. CHEMICAL COMPOUNDS: 5-caffeoylquinic acid (PubChem CID 5280633); 3-caffeoylquinic acid (PubChem CID 1794427); 1-caffeoylquinic acid (PubChem CID 10155076); 1,3-di-caffeoylquinic acid (PubChem CID 24720973); 1,5 - di-caffeoylquinic acid (PubChem CID 122685); caffeic acid (PubChem CID 689043); apigenin-7-glucuronide (PubChem CID 5319484); methylglyoxal PubChem CID (880); aminoguanidine hydrochloride (PubChem CID 2734687).