Mechanistic Studies on the Self-Assembly of PLGA Patchy Particles and Their Potential Applications in Biomedical Imaging.

Currently, several challenges prevent poly(lactic-co-glycolic acid) (PLGA) particles from reaching clinical settings. Among these is a lack of understanding of the molecular mechanisms involved in the formation of these particles. We have been studying in depth the formation of patchy polymeric particles. These particles are made of PLGA and lipid-polymer functional groups. They have unique patch-core-shell structural features: hollow or solid hydrophobic cores and a patchy surface. Previously, we identified the shear stress as the most important parameter in a patchy particle's formation. Here, we investigated in detail the role of shear stress in the patchy particle's internal and external structure using an integrative experimental and computational approach. By cross-sectioning the multipatch particles, we found lipid-based structures embedded in the entire PLGA matrix, which represents a unique finding in the PLGA field. By developing novel computational fluid dynamics and molecular dynamics simulations, we found that the shear stress determines the internal structure of the patchy particles. Equally important, we discovered that these particles emit a photoacoustic (PA) signal in the optical clinical imaging window. Our results show that particles with multiple patches emit a higher PA signal than single-patch particles. This phenomenon most likely is due to the fact that multipatchy particles absorb more heat than single-patchy particles as shown by differential scanning calorimetry analysis. Furthermore, we demonstrated the use of patchy polymeric particles as photoacoustic molecular probes both in vitro and in vivo studies. The fundamental studies described here will help us to design more effective PLGA carriers for a number of medical applications as well as to accelerate their medical translation.

Encapsulation of 67Cu therapeutic radiometal in luminescent lanthanide phosphate core and core-shell nanoparticles.

Copper-67 (67Cu) has physical characteristics useful for both therapy and imaging. However, its applicability has been hindered by the complexity of obtaining large quantities of a product with high specific activity. With the advancement of 67Cu production methods, suitable radioisotope carriers are sought. Lanthanide phosphate nanoparticles have demonstrated their multifunctional characteristics for biomedical applications and, more recently, their potential in radiopharmaceuticals. Thus, we produced luminescent lanthanide phosphate nanoparticles with core and core-shell structures, incorporating 67Cu during their synthesis. The nanoparticles exhibited hexagonal crystalline structure and spherical morphology with sizes below 6 nm. The luminescent colloidal suspensions evidenced the characteristic 5D0-7FJ for Eu3+, providing the red color under UV light. A radiochemical yield of 67Cu >95% was obtained with both core and core-shell LaPO4:Eu. The core-shell nanoparticles reduced the release of 67Cu by a factor of ∼2 over that from the core, which continuously decreased with time. Multifunctional LnPO4 nanoparticles have the potential to be used as a carrier of single or multiple radioisotopes to enhance image-guided targeted nano-radiopharmaceutical therapy.

Analysis of metal radioisotope impurities generated in [(18)O]H(2)O during the cyclotron production of fluorine-18.

We show the separation of metal radioisotope impurities using capillary electrophoresis (CE). The methodology used is an improvement of existent protocols for separation of stable metal ions. Production of fluorine-18 using [(18)O]H(2)O-enriched water encased in a titanium target body results in the production of several metal radioisotope impurities. Optimisation of the conditions for CE separation of the metal radioisotope impurities incorporated the use of 6 mM 18-Crown-6 in combination with 12 mM glycolic acid as complexing agents within the running buffer (10 mM pyridine, pH 4.0). Using this optimised procedure, we were able to separate and detect a number of metal radioisotopes, including chromium, cobalt, manganese, vanadium and berillium, within the fM concentration range.

Microfluidic technology for PET radiochemistry.

This paper describes the first application of a microfabricated reaction system to positron emission tomography (PET) radiochemistry. We have applied microfluidic technology to synthesise PET radiopharmaceuticals using (18)F and (124)I as labels for fluorodeoxyglucose (FDG) and Annexin-V, respectively. These reactions involved established methods of nucleophilic substitution on a mannose triflate precursor and direct iodination of the protein using iodogen as an oxidant. This has demonstrated a proof of principle of using microfluidic technology to radiochemical reactions involving low and high molecular weight compounds. Using microfluidic reactions, [(18)F]FDG was synthesised with a 50% incorporation of the available F-18 radioactivity in a very short time of 4s. The radiolabelling efficiency of (124)I Annexin-V was 40% after 1 min reaction time. Chromatographic analysis showed that such reaction yields are comparable to conventional methods, but in a much shorter time. The yields can be further improved with more optimisation of the microfluidic device itself and its fluid mixing profiles. This demonstrates the potential for this technology to have an impact on rapid and simpler radiopharmaceutical synthesis using short and medium half-life radionuclides.

Microfluidic reactor for the radiosynthesis of PET radiotracers.

Here we show the first application of a microfabricated reaction system to PET radiochemistry, we term "microfluidic PET". The short half-life of the positron emitting isotopes and the trace chemical quantities used in radiolabelling make PET radiochemistry amenable to miniaturisation. Microfluidic technologies are capable of controlling and transferring tiny quantities of liquids which allow chemical and biochemical assays to be integrated and carried out on a small scale. Such technologies provide distinct advantages over current methods of PET radiochemical synthesis. To demonstrate "proof of principle" we have investigated the radiohalogenation of small and large molecular weight molecules using the microfluidic device. These reactions involved the direct radioiodination of the apoptosis marker Annexin V using iodine-124, the indirect radioiodination of the anti-cancer drug doxorubicin from a tin-butyl precursor and the radiosynthesis of 2-[(18)F]FDG from a mannose triflate precursor and fluorine-18 and hence provide a test bed for microfluidic reactions. We demonstrate the rapid radioiodination of the protein Annexin V (40% radiochemical yield within 1 min) and the rapid radiofluorination of 2-[(18)F]FDG (60% radiochemical yield within 4s) using a polymer microreactor chip. Chromatographic analysis showed that the labelling efficiency of the unoptimised microfluidic chip is comparable to conventional PET radiolabelling reactions.

Imaging herpes virus thymidine kinase gene transfer and expression by positron emission tomography.

We report a series of studies that assess the feasibility and sensitivity of imaging of herpes virus type one thymidine kinase (HSV1-tk) gene transfer and expression with [124I]-5-iodo-2'-fluoro-1-beta-D-arabinofuranosyluracil ([124I]-FIAU) and positron emission tomography (PET) and the ability of [124I]-FIAU-PET imaging to discriminate different levels of HSV1-tk gene expression. Studies were performed in rats bearing multiple s.c. tumors derived from W256 rat carcinoma and RG2 rat glioma cells. In the first set, we tested the sensitivity of [124I]-FIAU-PET imaging to detect low levels of HSV1-tk gene expression after retroviral-mediated gene transfer. HSV1-tk gene transduction of one of preestablished wild-type W256 tumor in each animal was accomplished by direct intratumoral injection of retroviral vector-producer cells (W256-->W256TK* tumors). Tumors produced from W256 and W256TK+ cells served as the negative and positive control in each animal. Highly specific images of [124I]-FIAU-derived radioactivity were obtained in W256TK* tumors (that were transduced in vivo) and in W256TK+ tumors but not in nontransduced wild-type W256 tumors. The level of "specific" incorporated radioactivity in transduced portions of both W256TK* and W256TK+ tumors was relatively constant between 4 and 50 h. In the second set, we tested whether [124I]-FIAU and PET imaging can measure and discriminate between different levels of HSV1-tk gene expression. Multiple s.c. tumors were produced from wild-type RG2 cells and stably transduced RG2TK cell lines that express different levels of HSV1-tk. A highly significant relationship between the level of [124I]-FIAU accumulation [% injected dose/g and incorporation constant (Ki)] and an independent measure of HSV1-tk expression (sensitivity of the transduced tumor cells to ganciclovir, IC50) was demonstrated, and the slope of this relationship was defined as a sensitivity index. We have demonstrated for the first time that highly specific noninvasive images of HSV1-tk expression in experimental animal tumors can be obtained using radiolabeled 2'-fluoro-nucleoside [124I]-FIAU and a clinical PET system. The ability to image the location (distribution) of gene expression and the level of expression over time provides new and useful information for monitoring clinical gene therapy protocols in the future.

A causal link from ALK to hexokinase II overexpression and hyperactive glycolysis in EML4-ALK-positive lung cancer.

A high rate of aerobic glycolysis is a hallmark of malignant transformation. Accumulating evidence suggests that diverse regulatory mechanisms mediate this cancer-associated metabolic change seen in a wide spectrum of cancer. The echinoderm microtubule-associated protein-like 4-anaplastic lymphoma kinase (EML4-ALK) fusion protein is found in approximately 3-7% of non-small cell lung carcinomas (NSCLC). Molecular evidence and therapeutic effectiveness of FDA-approved ALK inhibitors indicated that EML4-ALK is a driving factor of lung tumorigenesis. A recent clinical study showed that NSCLC harboring EML4-ALK rearrangements displayed higher glucose metabolism compared with EML4-ALK-negative NSCLC. In the current work, we presented evidence that EML4-ALK is coupled to overexpression of hexokinase II (HK2), one of the rate-limiting enzymes of the glycolytic pathway. The link from EML4-ALK to HK2 upregulation is essential for a high rate of glycolysis and proliferation of EML4-ALK-rearranged NSCLC cells. We identified hypoxia-inducible factor 1α (HIF1α) as a key transcription factor to drive HK2 gene expression in normoxia in these cells. EML4-ALK induced hypoxia-independent but glucose-dependent accumulation of HIF1α protein via both transcriptional activation of HIF1α mRNA and the phosphatidylinositol 3 kinase-AKT pathway to enhance HIF1α protein synthesis. The EML4-ALK-mediated upregulation of HIF1α, HK2 and glycolytic metabolism was also highly active in vivo as demonstrated by fluorodeoxyglucose-positron emission tomography imaging of xenografts grown from EML4-ALK-positive NSCLC cells. Our data reveal a novel EML4-ALK-HIF1α-HK2 cascade to enhance glucose metabolism in EML4-ALK-positive NSCLC.

Developments in whole-body molecular imaging of live subjects.

New molecular imaging technologies are being developed specifically for imaging animal models of human disease. Positron emission tomography (PET) in particular allows in vivo biochemistry to be studied with a high degree of sensitivity and specificity, and provides direct in vivo information on molecular and cellular pathways that underlie disease mechanisms and therapeutics. However, clinical PET systems have inadequate resolution for imaging small animals. Thus, specialized high-resolution PET hardware and software are now being developed.

Effect of regional angiotensin II infusion on the relationship between tumour blood flow and fluorouracil uptake in a liver metastasis animal model.

The aim of this study was to assess the relationship between tumour:liver blood flow and 5-fluorouracil (5-FU) uptake ratios in a hypovascular liver metastasis animal model, and examine whether they were similarly affected by a 5 min infusion of angiotension II via the hepatic artery. Tumour:liver blood flow ratio was measured using the isotope tracer 64Copper (II)-pyruvaldehyde bis(n-4 methyl thiosemicarbazone, and 5-FU was tritiated. There was a wide variation in tumour:liver blood flow and 5-FU uptake ratios which could only partly be explained by between animal variation, and was not related either to individual tumour size or overall tumour burden within the liver. There was a close correlation (r = 0.957, P < 0.0001) between tumour:liver blood flow and 5-FU uptake ratios. Angiotensin II infusion significantly increased tumour:liver blood flow (nested analysis of variance, P= 0.05) but not 5-FU uptake (P = 0.29) ratios. There was a poor correlation (r = 0.51, P = 0.13) between tumour:liver blood flow and 5-FU uptake ratios with angiotensin II infusion. Thus, despite an increased 5-FU blood concentration arising from angiotensin-induced reduction in blood flow at constant 5-FU infusion dose, tumour:liver 5-FU uptake ratio did not increase as expected, and there ceased to be a significant correlation between tumour:liver blood flow and 5-FU uptake ratios. We conclude that the vasoactive changes within the hypovascular tumour circulation produced by a 5 min angiotensin II infusion did not significantly increase tumour 5-FU uptake.

Immuno-PET of human colon xenograft- bearing BALB/c nude mice using 124I-CDR-grafted humanized A33 monoclonal antibody.

UNLABELLED: Radiolabeling monoclonal antibodies (mAbs) allows the evaluation of biodistribution of constructs in vivo through gamma camera imaging and also permits quantitation of mAb uptake in tumors through biopsy-based counting techniques. The quantitation of radiolabeled mAb uptake in cancer patients is complicated by the attenuation of gamma emissions of routinely used isotopes (e.g., 131I and 111In) and the spatial resolution and sensitivity of gamma cameras. METHODS: We used the positron-emitting isotope 124I (half-life [T1/2] = 4.2 d) to label the recombinant humanized anti-colorectal cancer A33 antibody (huA33) and evaluated its biodistribution properties and PET imaging characteristics in BALB/c nude mice bearing SW1222 colorectal xenografts and control colon tumors. RESULTS: The immunoreactivity of radioconjugate was 78% as determined using the cell-binding Lindmo assay. The apparent association constant was found to be 2.2 x 10(9) M(-1), and the number of antibody binding sites per cell was 371,000. The radioconjugate was found to be stable in serum obtained from mice at various times after injection. Assuming a two-compartment model with a four-parameter fit of mean blood levels, the T1/2alpha was 1.5 h and the T1/2beta was 38.2 h. Excellent tumor uptake was obtained, with maximal uptake reaching 50.0 +/- 7.0 percentage injected dose per gram of tumor by 4 d after injection. Specificity of localization was shown by lack of uptake in control tumor. PET imaging detected antigen-positive tumor by 4 h after injection, and high-resolution images were obtained by 24 h after injection. CONCLUSION: In clinical trials using PET, huA33 labeled with 124I has potential for imaging and staging colon tumors and quantifying antibody uptake in colon tumors in vivo.

Copper radionuclides and radiopharmaceuticals in nuclear medicine.

The chemistry, radiochemistry, radiobiology, and radiopharmacology of radiopharmaceuticals containing copper radionuclides are reviewed. Copper radionuclides offer application in positron emission tomography, targeted radiotherapy, and single photon imaging. The chemistry of copper is relatively simple and well-suited to radiopharmaceutical application. Current radiopharmaceuticals include biomolecules labelled via bifunctional chelators primarily based on cyclic polyaminocarboxylates and polyamines, and pyruvaldehyde-bis(N4-methylthiosemicarbazone) (PTSM) and its analogues. The chemistry of copper, of which only a fraction has yet been exploited, is likely to be applied more fully in the future.

Metal complexes of bleomycin: evaluation of [Rh-105]-bleomycin for use in targeted radiotherapy.

Bleomycin has been used as a carrier for several radioisotopes; however, its potential for clinical use has been limited either by the in vivo stability of the complexes or the half-life of the isotope used. The chemical, biological, and radiological properties of 105Rhodium appear to make it an ideal choice for targeted radiotherapy. The synthesis and purification of a hereto unreported 105Rhodium-bleomycin (105Rh-BLM) complex is described. The stability of this complex in plasma is sufficient to allow targeted delivery of the radioisotope. 57Cobalt-bleomycin was studied under identical conditions for comparative purposes. The suitability of 105Rh-BLM for targeted therapy, which appears to be limited by the renal clearance of this agent, is discussed.

Radionuclides and carrier molecules for therapy.

Although radionuclide therapy has been around for a long time, this modality of cancer treatment has been limited mainly to the use of [32P]-phosphate and [131I]-sodium iodide. The last few years, however, have seen an increased interest in this area due to new developments of radionuclides and carrier molecules that may provide selective targeting of tumour sites. The potential of this technique can be further realized if the radionuclide is carefully selected to match both the localization of the carrier molecule and tumour morphology. This paper briefly reviews radionuclides in current use and potential candidates for targeted therapy. Decay characteristics, production methods and relevant chemical properties are discussed.

Performance of a block detector PET scanner in imaging non-pure positron emitters--modelling and experimental validation with 124I.

The key performance measures of resolution, count rate, sensitivity and scatter fraction are predicted for a dedicated BGO block detector patient PET scanner (GE Advance) in 2D mode for imaging with the non-pure positron-emitting radionuclides 124I, 55Co, 61Cu, 62Cu, 64Cu and 76Br. Model calculations including parameters of the scanner, decay characteristics of the radionuclides and measured parameters in imaging the pure positron-emitter 18F are used to predict performance according to the National Electrical Manufacturers Association (NEMA) NU 2-1994 criteria. Predictions are tested with measurements made using 124I and show that, in comparison with 18F, resolution degrades by 1.2 mm radially and tangentially throughout the field-of-view (prediction: 1.2 mm), count-rate performance reduces considerably and in close accordance with calculations, sensitivity decreases to 23.4% of that with 18F (prediction: 22.9%) and measured scatter fraction increases from 10.0% to 14.5% (prediction: 14.7%). Model predictions are expected to be equally accurate for other radionuclides and may be extended to similar scanners. Although performance is worse with 124I than 18F, imaging is not precluded in 2D mode. The viability of 124I imaging and performance in a clinical context compared with 18F is illustrated with images of a patient with recurrent thyroid cancer acquired using both [124I]-sodium iodide and [18F]-2-fluoro-2-deoxyglucose.

Rapid screening of 2-[18F]-fluoro-2-deoxy-D-glucose infusions for volatile organic compound contaminants by solid phase microextraction with gas chromatography-selective ion monitoring mass spectrometry (SPME-GC-SIMMS).

A method compatible with radioactive samples, capable of detecting trace volatile components in a sample volume of ca. 1cm(3) of 2-[18F]-fluoro-2-deoxy-D-glucose solution is described. The approach, based on solid phase micro-extraction gas chromatography-mass spectrometry with a carboxen/polydimethylsiloxane based fibre, was optimised with respect to extraction time (10 min), extraction temperature (60 degrees C) and phase volume ratio (1). The analysis time, including extraction, was less than 20 min with linear responses for acetonitrile and ethanol over the ranges: 0.09-80 microg cm(-3) (22 degrees C, acetonitrile) and 0.78-79 microg cm(-3) (22 degrees C, ethanol). The detection limits were estimated to be ca. 0.78 microg cm(-3) for ethanol and 0.09 microg cm(-3) for acetonitrile. Stability studies indicated analyte losses of up to 75% over 24h and analysis of aged 2-[18F]FDG samples showed that levels of ethanol and acetonitrile were not less than 100 microg cm(-3), indicative of levels substantially greater than this in the original infusions given to human subjects.

SU-D-217A-04: Evaluation of the Spatial Concordance Between the Intratumoral Patterns of 18F-FLT and 18F-FDG Uptake in a Small Animal Tumor Model.

PURPOSE: PET imaging allows for the visualization of tumor microenvironment and identification of aggressive or radioresistant tumor subvolumes that can be targeted with an escalated radiation dose. Multiple PET tracers have been developed for visualization of different aspects of tumor microenvironment; however, the spatial distribution of tracers in tumors is equally affected by tumor tissue viability and tracer delivery limitations. Given these issues and the low resolution associated with PET imaging, two different PET tracers can produce very similar images. Therefore, it is important to demonstrate that a novel PET tracer does provide additional useful information to that obtained with other tracers. This study investigates the added value of performing 18F-FLT PET imaging as well as 18F-FDG imaging. METHODS: Head and neck tumor xenografts grown in nude mice were used to study intratumoral tracerdistributions. 18F-FDG and 18F-FLT PET images were obtained on subsequent days using a small animal PET/CT. Pinnacle 9 was used to deformably register the CT image from the FLT PET/CT to the FDG PET/CT image set. The generated deformation was applied to the FLT PET image to achieve an unbiased FLT to FDG PET image registration. The Pearson correlation coefficient between FDG and FLT was calculated voxel- by-voxel within a tumor contour. Overlap analysis of thresholded tracer distributions was carried out by comparing Dice similarity coefficients. RESULTS: Both SQ20B and FaDu tumors showed a moderate voxel-by-voxel correlation between FDG and FLT intratumoral patterns of uptake with an average rho value of .56 and .63 respectively (range .37-.76) despite significant differences in tumor morphology. The average volumes under thedice coefficient surface for SQ20B and FaDu tumors were not significantly different. CONCLUSIONS: Despite being equally affected by the issues of tracer delivery, necrosis and PET resolution, FDG and FLT PET images displayed an observable difference at clinically relevant thresholds.

A phase II study of a 5T4 oncofoetal antigen tumour-targeted superantigen (ABR-214936) therapy in patients with advanced renal cell carcinoma.

In a phase II study, 43 renal cell carcinoma patients were treated with individualised doses of ABR-214936; a fusion of a Fab recognising the antigen 5T4, and Staphylococcal enterotoxin A. Drug was given intravenously on 4 consecutive days, treatment was repeated 1 month later. Treatment was associated with moderate fever and nausea, but well tolerated. Of 40 evaluable patients, 28 had disease control at 2 months, and at 4 months, one patient showed partial response (PR) and 16 patients stable disease. Median survival, with minimum follow-up of 26 months was 19.7 months with 13 patients alive to date. Stratification by the Motzer's prognostic criteria highlights prolonged survival compared to published expectation. Patients receiving higher drug exposure had greater disease control and lived almost twice as long as expected, whereas the low-exposure patients survived as expected. Sustained interleukin-2 (IL-2) production after a repeated injection appears to be a biomarker for clinical effect, as the induced-IL-2 level on the day 2 of treatment correlated with survival. The high degree of disease control and the prolonged survival suggest that this treatment can be effective. These findings will be used in the trial design for the next generation of drug, with reduced antigenicity and toxicity.

Production of gallium-66, a short-lived, positron emitting radionuclide.

The excitation functions for the production of 66Ga and some other radionuclides produced by the 4He-particle bombardment of a natural copper target have been measured up to 31 MeV incident energy. The radiochemical separation of 66Ga from the irradiated copper target as well as from the other radionuclides formed is described. The yield of 66Ga at 18 MeV incident energy is 708 microCi/microAh at end of bombardment and the contamination of 67Ga is 0.25%. The intended use of the 66Ga produced is to label monoclonal antibodies for PET scanning.

A method for the production of iron-52 with a very low iron-55 contamination.

The production and radiochemical separation of 52Fe from 4He irradiation of enriched 50Cr target is described. Methods developed for the recovery of the target material (50Cr) are also described. The yield of 52Fe at 38 MeV incident 4He energy is 1667 +/- 133 MBq/C (163 +/- 13 microCi/microAh) at end of bombardment and the contamination of 55Fe is only 0.008%.

Nickel-57-doxorubicin, a potential radiotracer for pharmacokinetic studies using PET: production and radiolabelling.

The clinical use of anthracyclines, such as doxorubicin (DXR), is hampered by tumour development of multidrug resistance (MDR). The drug efflux associated with MDR could be characterised in vivo using Positron Emission Tomography (PET) in conjunction with a suitable radiolabelled drug. We are investigating DXR labelled with the positron emitter 57Ni as a potential analogue of the parent drug. Essential to this work is the production of a high purity radionuclide in a suitable chemical form for the preparation of radiolabelled DXR. To optimise production parameters, excitation functions (reaction cross section as a function of beam energy) for proton induced reactions in cobalt were measured up to 60 MeV. The excitation function for the 59Co(p,3n)57Ni reaction shows a maximum cross section of 13.8 +/- 1.5 mb at 38 MeV. The optimum energy range for production of 57Ni was found to be 41-->26 MeV resulting in an experimental thick target yield of 17.8 MBq/muAh. The level of the 56Ni impurity is only 0.21% at the end of bombardment. A radiochemical procedure, based on cation-exchange chromatography, has been developed for the separation of radionickel from the cobalt target and other radiochemical and chemical impurities. The 57Ni activity was eluted, using 2M HCl, from a Dowex-50Wx8(H+) column, in a 95% radiochemical yield. Optimum labelling of DXR has been investigated in terms of pH, reaction time and temperature, achieving radiochemical yields > 94%. DXR labelled with 57Ni therefore shows promise as a radiotracer for pharmacokinetic studies using PET.