Ligand-assisted reprecipitation synthesis of highly luminescent and stable CsPbBr3@SiO2nanoparticles with formation kinetics analysis.

Cesium lead bromide (CsPbBr3) perovskite nanocrystals are becoming a popular alternative to chalcogenide quantum dots because of their bright green fluorescence and high color purity. However, owing to the poor stability caused by their highly ionic nature and the dynamic binding of long-chain capping ligands, their practical applications are limited. Although (3-aminopropyl)triethoxysilane (APTES) is a frequently used insulating material for wrapping CsPbBr3nanocrystals, it often causes surface etching. To address this issue, we introduced oleic acid into the anti-solvent toluene to inhibit the etching effect of APTES using a modified room-temperature ligand-assisted reprecipitation process. We utilized in situ time-dependent photoluminescence measurements to study the formation kinetics of CsPbBr3nanocrystals and determine the optimal ligands ratio. This innovative approach enables precise control over CsPbBr3@SiO2nanoparticles synthesis, yielding uniformly shaped nanocrystals with a silica shell, a consistent size around 10.17 ± 1.6 nm, and enhanced photoluminescence quantum yields ranging from 90% and 100%. The photoluminescence lifetimes of our CsPbBr3@SiO2nanoparticles were significantly prolonged owing to a reduction in non-radiative recombination. This boosts their stability in thermal and polar solvent environments, making them superior candidates for use in photonic devices.

Augmentin loaded functionalized halloysite nanotubes: A sustainable emerging nanocarriers for biomedical applications.

Clay minerals such as Halloysite nanotubes (HNTs), abundantly available green nanomaterial, exhibit a significant advantage in biomedical applications such as drug delivery, antibacterial and antimicrobials, tissue engineering or regeneration, etc. Because of the mesoporous structure and high absorbability, HNTs exhibit great potential as a nanocarrier in drug delivery applications. The sulfuric acid treatment enhances the surface area of the HNTs and thereby improves their drug-loading capacity by enlarging their lumen space/inner diameter. In the present investigation, based on the literature that supports the efficacy of drug loading after acid treatment, a dual treatment was performed to functionalize the HNTs surface. First, the HNTs were etched and functionalized using sulfuric acid. The acid-functionalized HNTs underwent another treatment using (3-aminopropyl) triethoxysilane (APTES) to better interact the drug molecules with the HNTs surfaces for efficient drug loading. Augmentin, a potential drug molecule of the penicillin group, was used for HNTs loading, and their antibacterial properties, cytotoxicity, and cumulative drug release (%) were evaluated. Different characterization techniques, such as X-ray diffractometer (XRD) and Fourier Transform Infra-Red (FT-IR), confirm the loading of Augmentin to the APTES@Acid HNTs. TEM images confirm the effective loading of the drug molecule with the HNTs. The drug encapsulation efficiency shows 40.89%, as confirmed by the Thermogravimetric Analysis (TGA). Also, the Augmentin-loaded APTES@Acid HNTs exhibited good antibacterial properties against E. coli and S. aureus and low cytotoxicity, as confirmed by the MTT assay. The drug release studies confirmed the sustainable release of Augmentin from the APTES@Acid HNTs. Hence, the treated HNTs can be considered as a potential nanocarrier for effectively delivering Augmentin and promoting enhanced therapeutic benefits.

CRET-based immunoassay on magnetic beads for selective and sensitive detection of Nanog antigen as a key cancer stem cell marker.

A method is presented for chemiluminescence resonance energy transfer (CRET) using APTES-Fe3O4 as a highly efficient energy acceptor with strong magnetic effectiveness over extended distances, while an Au@BSA-luminol composite acts as the donor. In order to boost the chemiluminescence reactions, CuO nanoparticles were successfully employed. The distance between the donor and acceptor is a crucial factor in the occurrence of the CRET phenomenon. A sensitive and high-throughput sandwich chemiluminescence immunosensor has been developed accordingly with a linear range of 1.0 × 10-7 g/L to 6.0 × 10-5 g/L and a limit of detection of 0.8 × 10-7 g/L. The CRET-based sandwich immunosensor has the potential to be implemented to early cancer diagnosis because of its high sensitivity in detecting Nanog, fast analysis (30 min), and simplicity. Furthermore, this approach has the potential to be adapted for the recognition of other antigen-antibody immune complexes by utilizing the corresponding antigens and their selective antibodies.

Design and synthesis of vancomycin-functionalized ZnFe2 O4 nanoparticles as an effective antibacterial agent against methicillin-resistant Staphylococcus aureus.

The emergence of antibiotic-resistant bacterial infections is a principal threat to global health. Functionalization of nanomaterial with antibiotics is known as a useful method for increasing the effectiveness of existing antibiotics. In this study, vancomycin-functionalized ZnFe2 O4 nanocomposite (ZnFe2 O4 @Cell@APTES@Van) was synthesized, and its functional groups and particle size were characterized using Fourier-transform infrared spectroscopy, thermogravimetric analysis, dynamic light scattering, scanning electron microscope, and transmission electron microscopy. The antibacteria activity of the synthesized nanocomposite was evaluated using minimum inhibitory concentration and minimum bactericidal concentration against Escherichia coli, Staphylococcus aureus, and methicillin-resistant Staphylococcus aureus (MRSA). Cytotoxicity assay was done by 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide method. Characterization analyses of synthesized nanocomposite confirmed the binding of vancomysin on the surface of ZnFe2 O4 @Cell@APTES. Nanocomposite exhibited an aggregated semi-spherical structure with hydrodynamic radii of ∼382 nm. In vitro antibacterial activity test showed that vancomycin and vancomycin functionalized ZnFe2 O4 have no antibacterial effect against E. coli. S. aureus was sensitive to vancomycin and ZnFe2 O4 @Cell@APTES@Van NPs and ZnFe2 O4 NPs did not improve vancomycin antibacterial activity against these bacteria. MRSA is resistant to vancomycin while ZnFe2 O4 @Cell@APTES@Van NPs was efficient in inhibiting MRSA growth. In summary, this study showed that attachment of vancomycin to ZnFe2 O4 NPs was increased its antibacterial activity against MRSA.

Analyzing (3-Aminopropyl)triethoxysilane-Functionalized Porous Silica for Aqueous Uranium Removal: A Study on the Adsorption Behavior.

This study synthesized (3-aminopropyl)triethoxysilane-functionalized porous silica (AP@MPS) to adsorb aqueous uranium (U(VI)). To comprehensively analyze the surface properties of the AP@MPS materials, a combination of SEM, BET, XPS, NMR, and zeta potential tests were conducted. The adsorption experiments for U(VI) revealed the rapid and efficient adsorption capacity of AP@MPS, with the solution condition of a constant solution pH = 6.5, an initial U(VI) concentration of 600 mg × L-1, a maximum U(VI) capacity of AP@MPS reaching 381.44 mg-U per gram of adsorbent, and a removal rate = 63.6%. Among the four types of AP@MPS with different average pore sizes tested, the one with an average pore size of 2.7 nm exhibited the highest U(VI) capacity, particularly at a pH of 6.5. The adsorption data exhibited a strong fit with the Langmuir model, and the calculated adsorption energy aligned closely with the findings from the Potential of Mean Force (PMF) analysis. The outcomes obtained using the Surface Complex Formation Model (SCFM) highlight the dominance of the coulombic force ΔG0coul as the principal component of the adsorption energy (ΔG0ads). This work garnered insights into the adsorption mechanism by meticulously examining the ΔG0ads across a pH ranging from 4 to 8. In essence, this study's findings furnish crucial insights for the future design of analogous adsorbents, thereby advancing the realm of uranium(VI) removal methodologies.

Bright, small sizes and hydro-dispersive NIR persistent luminescence nanoparticles modified with Si and amino groups for enhanced bioimaging.

Near-infrared (NIR) persistent luminescence nanoparticles (PLNPs) with high brightness, small sizes, good hydro-dispersivity, and intrinsic surface-functional groups are desirable in biological applications. In this work, Cr3+-doped zinc gallogermanates Zn1+xGa2-2xGexO4:Cr (ZGGC) PLNPs were hydrothermally synthesized via 3-aminopropyltriethoxysilane (APTES) as an additive, or APTES and cetyltrimethylammonium bromide (CTAB) as two co-additives. Addition of APTES not only dramatically enhances the 696 nm NIR luminescence intensity, but also obviously decreases the particle size and introduces amino groups. In particular, thex= 0.1 series ZGGC (ZGGC0.1) with the addition of n moles equivalent APTES (ZGGC0.1-nA) had smaller particle sizes than thex= 0.2 counterpart (ZGGC0.2-nA). The NIR afterglow intensities increased with the APTES introduction. The ZGGC0.2-2.5A sample (also named as ZGGC, Si, -NH2) exhibited maximum luminescence intensities both in solid and aqueous states. With APTES, Si atom is doped and -NH2groups are modified, the trap depth and density become larger, and the afterglow intensities and decay time are significantly enhanced. More notably, co-addition of CTAB (ZGGC0.2-2.5A-C) (also named as ZGGC, Si, -NH2') further enhances hydro-dispersivity and luminescence intensity, decreases particle sizes, and results in more prominent amino groups. The trap density is drastically higher than that without CTAB (i.e. ZGGC0.2-2.5A). Change of Cr3+microenvironment in the crystal and more defects introduction contribute to the enhanced brightness. As expected, the ZGGC,Si,-NH2' PLNPs possess excellent biocompatibility, deep tissue penetration and distinguished bioimaging properties, and rechargeability with orange LED light. The ZGGC,Si,-NH2' PLNPs should provide to be an excellent nanomaterial for various functionalization and bioimaging applications.

Capillary surface modification using millimolar levels of aminosilane reagent for highly efficient separation of phenolic acids and flavonols by capillary electrophoresis with UV detection.

INTRODUCTION: Phytochemical analysis of phenolic acids and flavonols poses a challenge, necessitating the development of an efficient separation method. This facilitates the quantification of these compounds, yielding valuable insights into their benefits. OBJECTIVE: To develop a highly effective separation of phenolic acids and flavonols by capillary electrophoresis and ultraviolet (UV) detection through the modification of the capillary surface using 3-aminopropyltriethoxysilane (APTES) at millimolar concentrations. METHODS: The capillary surface is modified with 0.36 mM-APTES solution. The electrolyte is 20.0 mM borate buffer (pH 9.0). Separation performance (plate number N, resolution Rs ), stability, and reproducibility of the coating procedure are evaluated using the analysis of phenolic acids, rutin and quercetin. RESULTS: The modified capillary provided efficient separation with plate numbers N ≥ 1.0 × 104 m-1 and resolution Rs ≥ 0.8 for all pairs of adjacent peaks of the separation of five selected phenolic acids, rutin, quercetin, caffeine and methylparaben (as internal standard). The precisions of the relative migration times for 17 consecutive analyses of samples over 3 h were 1% relative standard deviation (RSD) for rutin and 7% RSD for quercetin. The analysis of rutin and quercetin in 12 dietary supplement product samples only required a simple dilution step for sample preparation. CONCLUSION: A straightforward modification technique utilising millimolar concentrations of APTES resulted in highly efficient separation of phenolic acids, rutin and quercetin, accompanied by high precision and surface stability. The modified capillary proved successful in analysing rutin and quercetin content in dietary supplements.

A Multifunctional Polyethylene Glycol/Triethoxysilane-Modified Polyurethane Foam Dressing with High Absorbency and Antiadhesion Properties Promotes Diabetic Wound Healing.

The delayed healing of chronic wounds, such as diabetic foot ulcers (DFUs), is a clinical problem. Few dressings can promote wound healing by satisfying the demands of chronic wound exudate management and tissue granulation. Therefore, the aim of this study was to prepare a high-absorption polyurethane (PU) foam dressing modified by polyethylene glycol (PEG) and triethoxysilane (APTES) to promote wound healing. PEG-modified (PUE) and PEG/APTES-modified (PUESi) dressings were prepared by self-foaming reactions. Gauze and PolyMem were used as controls. Next, Fourier transform-infrared spectroscopy, thermomechanical analyses, scanning electron microscopy and tensile strength, water absorption, anti-protein absorption, surface dryness and biocompatibility tests were performed for in vitro characterization. Wound healing effects were further investigated in nondiabetic (non-DM) and diabetes mellitus (DM) rat models. The PUE and PUESi groups exhibited better physicochemical properties than the gauze and PolyMem groups. Moreover, PUESi dressing showed better anti-adhesion properties and absorption capacity with deformation. Furthermore, the PUESi dressing shortened the inflammatory phase and enhanced collagen deposition in both the non-DM and DM animal models. To conclude, the PUESi dressing not only was fabricated with a simple and effective strategy but also enhanced wound healing via micronegative-pressure generation by its high absorption compacity with deformation.

Investigation on the Mechanism of PAL (100) Surface Modified by APTES.

The interfacial mechanism has always been a concern for 3-aminopropyltriethoxysilane (APTES)-grafted palygorskite (PAL). In this research, the mechanism of graft modification for grafting of APTES to the surface of PAL (100) was studied using density functional theory (DFT) calculation. The results illustrated that different grafting states of the APTES influence the inter- and intramolecular interactions between APTES/PAL (100), which are reflected in the electronic structures. For single-, double-, and three-toothed state APTES-PAL (100), the charge transfer rates from the PAL (100) surface to APTES were 0.68, 1.02, and 0.77 e, respectively. The binding energy results show that PAL (100) modification performance in the double-tooth state is the best compared to the other states, with the lowest value of -181.91 kJ/mol. The double-toothed state has lower barrier energy (94.69, 63.11, and 153.67 kJ/mol) during the modification process. This study offers theoretical insights into the chemical modification of the PAL (100) surface using APTES coupling agents, and can provide a guide for practical applications.

Photocatalytic Inactivation of Co-Culture of E. coli and S. epidermidis Using APTES-Modified TiO2.

The presented work shows the antibacterial activity of TiO2 photocatalysts modified by 3-aminopropyltriethoxysilane (APTES). The APTES-functionalized TiO2 samples were obtained by the solvothermal process followed by calcination. The antibacterial activity of APTES/TiO2 samples was evaluated with two species of bacteria, Escherichia coli and Staphylococcus epidermidis, under artificial solar light (ASL) irradiation. The used bacteria are model organisms characterized by negative zeta potential (approx. -44.2 mV for E. coli and -42.3 mV for S. epidermidis). For the first time, the antibacterial properties of APTES-functionalized TiO2 were evaluated against mono- and co-cultured bacteria. The high antibacterial properties characterized the obtained APTES-modified nanomaterials. The best antibacterial properties were presented in the TiO2-4 h-120 °C-300 mM-Ar-300 °C sample (modified with 300 mM of APTES and calcined at 300 °C). The improvement of the antibacterial properties was attributed to a positive value of zeta potential, high surface area, and porous volume.

Evaluation of the impact of alkyl silane entity (APTES) on photocatalyst (TiO2) and their photocatalytic degradation of organic compounds for environmental remediation.

Environmental pollution by diverse organic pollutants is a serious issue facing humanity, and the scientific community is working hard to find a solution to climatic change due to pollution. Along the same lines, we have tried to find a material/method which is economical and less laborious for achieving the same desired objectives. In this work, the surface modification of titanium dioxide to be used as a photocatalyst was carried out with different concentrations of alkyl silane agent APTES (3-aminopropyltriethoxysilane) and studied their impact on the degradation of representative compound, i.e., methylene blue. The surface-modified TiO2-APTES nanoparticles were obtained via the solvothermal process. The APTES in different molar (0.21-0.41 M) concentrations was obtained by dissolving APTES in ethanol. The obtained samples were characterized through Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy, and UV-visible spectroscopy. The photocatalytic activity was inferred from the degradation ability of functionalized nanoparticles for methylene blue and evaluated by UV-visible spectroscopy. Our results demonstrated a significant 70% degradation rate of methylene blue.

Ligand-mediated CsPbBrxI3-x/SiO2quantum dots for red, stable and low-threshold amplify spontaneous emission.

The red-emitting perovskite material has received widespread attention as a long-wavelength optical gain media. But the easy phase change in the air limits its practical application. Herein, red CsPbBrxI3-x/SiO2quantum dots (QDs) are prepared by a ligand-mediated hot injection method in which 3-aminopropyl-triethoxysilane (APTES) is used instead of the usual oleylamine (OAm) ligand. Through the hydrolysis of amino groups, a thin silicon layer is formed on the QD surface, improving the stability and without causing the aggregation of QDs. We find that the ratio of I/Br and the size of QDs can be tuned by adjusting the APTES amount. Moreover, this ligand-mediated synthesis effectively passivates the surface defects, so the photoluminescence quantum yield is remarkably improved, and the carrier lifetime is prolonged. The amplified spontaneous emission is achieved under 532 nm nanosecond laser excitation. Compared with the original CsPbBrI2-OAm QD films, the threshold of CsPbBrxI3-x/SiO2QD films is reduced from 403.5 to 98.7µJ cm-2, and the radiation stability is significantly enhanced. Therefore, this material shows great potential in the random laser field.

Artificial Solar Light-Driven APTES/TiO2 Photocatalysts for Methylene Blue Removal from Water.

A visible-light photocatalytic performance of 3-aminopropyltriethoxysilane (APTES)-modified TiO2 nanomaterials obtained by solvothermal modification under elevated pressure, followed by calcination in an argon atmosphere at 800-1000 °C, is presented for the first time. The presence of silicon and carbon in the APTES/TiO2 photocatalysts contributed to the effective delay of the anatase-to-rutile phase transformation and the growth of the crystallites size of both polymorphous forms of TiO2 during heating. Thus, the calcined APTES-modified TiO2 exhibited higher pore volume and specific surface area compared with the reference materials. The change of TiO2 surface charge from positive to negative after the heat treatment increased the adsorption of the methylene blue compound. Consequently, due to the blocking of active sites on the TiO2 surface, the adsorption process negatively affected the photocatalytic properties. All calcined photocatalysts obtained after modification via APTES showed a higher dye decomposition degree than the reference samples. For all 3 modifier concentrations tested, the best photoactivity was noted for nanomaterials calcined at 900 °C due to a higher specific surface area than materials calcined at 1000 °C, and a larger number of active sites available on the TiO2 surface compared with samples annealed at 800 °C. It was found that the optimum concentration for TiO2 modification, at which the highest dye decomposition degree was noted, was 500 mM.

Protein Attachment Mechanism for Improved Functionalization of Affinity Monolith Chromatography (AMC).

This work aims at understanding the attachment mechanisms and stability of proteins on a chromatography medium to develop more efficient functionalization methodologies, which can be exploited in affinity chromatography. In particular, the study was focused on the understanding of the attachment mechanisms of bovine serum albumin (BSA), used as a ligand model, and protein G on novel amine-modified alumina monoliths as a stationary phase. Protein G was used to develop a column for antibody purification. The results showed that, at lower protein concentrations (i.e., 0.5 to 1.0 mg·mL-1), protein attachment follows a 1st-order kinetics compatible with the presence of covalent binding between the monolith and the protein. At higher protein concentrations (i.e., up to 10 mg·mL-1), the data preferably fit a 2nd-order kinetics. Such a change reflects a different mechanism in the protein attachment which, at higher concentrations, seems to be governed by physical adsorption resulting in a multilayered protein formation, due to the presence of ligand aggregates. The threshold condition for the prevalence of physical adsorption of BSA was found at a concentration higher than 1.0 mg·mL-1. Based on this result, protein concentrations of 0.7 and 1.0 mg·mL-1 were used for the functionalization of monoliths with protein G, allowing a maximum attachment of 1.43 mg of protein G/g of monolith. This column was then used for IgG binding-elution experiments, which resulted in an antibody attachment of 73.5% and, subsequently, elution of 86%, in acidic conditions. This proved the potential of the amine-functionalized monoliths for application in affinity chromatography.

Effect of APTES modified TiO2 on antioxidant enzymes activity secreted by Escherichia coli and Staphylococcus epidermidis.

In this work, the impact of APTES-modified TiO2 photocatalysts on antioxidant enzymes (catalase and superoxide dismutase) activity secreted by bacteria was presented. Microbial tests has been examined using Escherichia coli (ATCC 29425) and Staphylococcus epidermidis (ATCC 49461) as model organisms. It was found that APTES-TiO2 affected the activity of antioxidant enzymes. Additionally, obtained APTES-TiO2 photocatalysts were capable of total E. coli and S. epidermidis inactivation under artificial solar light irradiation. The sample modified with the concentration of APTES equals 300 mM (TiO2-4h-120°C-300mM) showed the strongest photocatalytic activity toward both bacteria species. The two-stage photocatalytic mechanism of bacteria response to photocatalysts was proposed.

Synthesis of iron oxide nanoparticles-antiubiquitin antibodies conjugates for depletion of dead/damaged spermatozoa from buffalo (Bubalus bubalis) semen.

The synthesis of iron oxide nanoparticles (IONPs)-antiubiquitin antibodies (Abs) complex for depletion of dead/damaged spermatozoa from buffalo semen was done. The IONPs synthesized were round in shape with size of 12.09 ± 0.91 nm. At the end of the two-step functionalization, that is, silanization and pegylation of bare IONPs and bioconjugation of functionalized IOPNs, particles with the sizes of 19.15 ± 1.46, 20.72 ± 0.95, and 73.01 ± 7.56 nm, respectively, were obtained. Twenty-four semen samples from four bulls with mean individual progressive motility (%) and sperm concentration (million/mL) of 77.1 ± 0.9 and 1,321.2 ± 84.7, respectively, were divided into Group I (control), and treatment groups viz. Groups II, III, and IV; with each group containing 150 ± 25 million dead/damaged spermatozoa. The IONPs-Abs complex was added at the ratio of 1:1 (0.5 µg/mL), 1:2 (1.0 µg/mL), and 1:4 (2.0 µg/mL), respectively, in the Groups II, III, and IV. The mean efficiency (%) of nanopurification was estimated to be greater in nanopurified semen with the increasing doses of the IONPs-Abs complex. A reduction of 29.3 ± 6.4%, 48.4 ± 5.3%, and 55.4 ± 4.4% in dead/damaged spermatozoa following nanopurification in Groups II, III, and IV, respectively, was observed. The study shows that in-house synthesized IONPs-Abs complex can be successfully used to deplete dead/damaged spermatozoa from buffalo semen with improvement in quality.

Functionalized magnetic nanomaterials for electrochemical biosensing of cholesterol and cholesteryl palmitate.

Synthesis and functionalization of magnetite nanoparticles (Fe3O4) was achieved with the view to covalently bind both cholesterol oxidase and cholesterol esterase biorecognition agents for the development of free and total cholesterol biosensors. Prior to enzyme attachment, Fe3O4 was functionalized with 3-aminopropyltriethoxysilane (APTES) and polyamidoamine (PAMAM) dendrimer. Characterization of the material was performed by FT-IR and UV spectroscopy, SEM/EDX surface analysis and electrochemical investigations. The response to cholesterol and its palmitate ester was examined using cyclic voltammetry. Optimum analytical performance for the free cholesterol biosensor was obtained using APTES-functionalized magnetite with a sensitivity of 101.9 µA mM-1 cm-2, linear range 0.1-1 mM and LOD of 80 µM when operated at 37 °C. In the case of the total cholesterol biosensor, the best analytical performance was obtained using PAMAM dendrimer-modified magnetite with sensitivity of 73.88 µA mM-1 cm-2 and linear range 0.1-1.5 mM, with LOD of 90 µM. A stability study indicated that the free cholesterol biosensors retained average activity of 98% after 25 days while the total cholesterol biosensors retained 85% activity upon storage over the same period. Graphical abstract Schematic representation of cholesterol esterase and oxidase loaded magnetic nanoparticles (Fe3O4@APTES or Fe3O4@APTES-PAMAM) generating hydrogen peroxide from cholesterol palmitate.

Impact of Silanization Parameters and Antibody Immobilization Strategy on Binding Capacity of Photonic Ring Resonators.

Ring resonator-based biosensors have found widespread application as the transducing principle in "lab-on-a-chip" platforms due to their sensitivity, small size and support for multiplexed sensing. Their sensitivity is, however, not inherently selective towards biomarkers, and surface functionalization of the sensors is key in transforming the sensitivity to be specific for a particular biomarker. There is currently no consensus on process parameters for optimized functionalization of these sensors. Moreover, the procedures are typically optimized on flat silicon oxide substrates as test systems prior to applying the procedure to the actual sensor. Here we present what is, to our knowledge, the first comparison of optimization of silanization on flat silicon oxide substrates to results of protein capture on sensors where all parameters of two conjugation protocols are tested on both platforms. The conjugation protocols differed in the chosen silanization solvents and protein immobilization strategy. The data show that selection of acetic acid as the solvent in the silanization step generally yields a higher protein binding capacity for C-reactive protein (CRP) onto anti-CRP functionalized ring resonator sensors than using ethanol as the solvent. Furthermore, using the BS3 linker resulted in more consistent protein binding capacity across the silanization parameters tested. Overall, the data indicate that selection of parameters in the silanization and immobilization protocols harbor potential for improved biosensor binding capacity and should therefore be included as an essential part of the biosensor development process.

The Effect of Silica Fume and Organosilane Addition on the Porosity of Cement Paste.

The present work systematically investigates the influence of silica fume and organosilane addition on the hydration dynamics and the capillary pore formation of a cement paste. The cement samples were prepared with two water-to-cement ratios with increasing amounts of silica fume and of (3-Aminopropyl)triethoxysilane (APTES) organosilane. Low-field 1H nuclear magnetic resonance (NMR) relaxation measurements were performed during the hydration of the samples and after hydration, in order to reveal the dynamics of water molecules and the pore distribution. Increasing concentrations of silica fume impact the perceived hydration dynamics through the addition of magnetic impurities to the pore solution. However, there is a systematic change in the capillary pore size distribution with an increase in silica fume concentration. The results also show that the addition of APTES majorly affects the hydration dynamics, by prolonging the dormancy and hardening stages. While it does not influence the pore size distribution of capillary pores, it prevents cyclohexane from saturating the capillary pores.

Amine-modified magnetic iron oxide nanoparticle as a promising carrier for application in bio self-healing concrete.

Self-healing mechanisms are a promising solution to address the concrete cracking issue. Among the investigated self-healing strategies, the biotechnological approach is distinguished itself by inducing the most compatible material with concrete composition. In this method, the potent bacteria and nutrients are incorporated into the concrete matrix. Once cracking occurs, the bacteria will be activated, and the induced CaCO3 crystals will seal the concrete cracks. However, the effectiveness of a bio self-healing concrete strictly depends on the viability of bacteria. Therefore, it is required to protect the bacteria from the resulted shear forces caused by mixing and drying shrinkage of concrete. Due to the positive effects on mechanical properties and the high compatibility of metallic nanoparticles with concrete composition, for the first time, we propose 3-aminopropyltriethoxy silane-coated iron oxide nanoparticles (APTES-coated IONs) as a biocompatible carrier for Bacillus species. This study was aimed to investigate the effect of APTES-coated IONs on the bacterial viability and CaCO3 yield for future application in the concrete structures. The APTES-coated IONs were successfully synthesized and characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The results show that the presence of 100 µg/mL APTES-coated IONs could increase the bacterial viability. It was also found that the CaCO3-specific yield was significantly affected in the presence of APTES-coated IONs. The highest CaCO3-specific yield was achieved when the cells were decorated with 50 µg/mL of APTES-coated IONs. This study provides new insights for the application of APTES-coated IONs in designing bio self-healing strategies.