A fluorescence turn "on-off" imaging probe for sequential detection of Al3+ and L-Cysteine in HeLa cells.

At this "Aluminum Age", exposure to aluminum (metallic or ionic form) is inevitable and inestimable. The presence of aluminum in biological systems is evident but more often aluminum toxicity is less understood. Therefore, the presence of biologically reactive aluminum needs to be identified and quantified. Alongside metals, L-cysteine, an essential amino acid, plays a pivotal role in the homeostasis of cellular oxidative and reductive stress. However, excess (<7g) could be lethal and can lead to death. Thus, in-situ selective detection of aluminum and L-cysteine is of larger interest. Here we report a fluorogenic probe (R) for the sequential selective detection and quantification of Al3+ and L-cysteine in a semi-aqueous medium (3:7; water: DMSO). The probe (R) was synthesized by a one-step acid-mediated condensation reaction between pyridine-3,4-diamine and 2-hydroxy-1-napthaldehyde. The synthesized probe was characterized using 1H and 13C NMR, and HR-Mass spectroscopic techniques. The probe (R) is non-emissive in nature, but on recognition of Al3+, the probe R showed "turn-on" emission (bright yellow colour) showing two emission maxima (522 nm and 547 nm), and no naked eye observable color change. Other competing cations do not show any noticeable fluorescence outcome. The R + Al3+ ensemble can specifically detect L-cysteine among all the essential amino acids by showing a fluorescence "turn-off" response. The sensing mechanism of Al3+ is obeying the chelation-enhanced fluorescence (CHEF) effect. The binding constant of R + Al3+ is 0.3 × 104 M-1. The limit of detection (LoD) for Al3+ and L-cysteine are 2.02 × 10-7 M and 0.5 × 10-5 M respectively. The probe (R) can show maximum efficiency within the pH range (7.0-10.0). The probe is found non-toxic (>80 % cell viability with 15 µM concentration) and employed for the in-vitro fluorescence imaging in the HeLa cell.

Nanoalum adjuvanted vaccines: small details make a big difference.

Purified vaccine antigens offer important safety and reactogenicity advantages compared with live attenuated or whole killed virus and bacterial vaccines. However, they require the addition of adjuvants to induce the magnitude, duration and quality of immune response required to achieve protective immunity. Aluminium salts have been used as adjuvants in vaccines for almost a century. In the literature, they are often referred to as aluminium-based adjuvants (ABAs), or aluminium salt-containing adjuvants or more simply "alum". All these terms are used to group aluminium suspensions that are very different in terms of atomic composition, size, and shape. They differ also in stability, antigen-adsorption, and antigen-release kinetics. Critically, these parameters also have a profound effect on the character and magnitude of the immune response elicited. Recent findings suggest that, by reducing the size of aluminium from micro to nanometers, a more effective adjuvant is obtained, together with the ability to sterile filter the vaccine product. However, the behaviour of aluminium nanoparticles in vaccine formulations is different from microparticles, requiring specific formulation strategies, as well as a more detailed understanding of how formulation influences the immune response generated. Here we review the current state of art of aluminium nanoparticles as adjuvants, with a focus on their immunobiology, preparation methods, formulation optimisation and stabilisation.

Guard Cell-Inspired Ion Channels: Harnessing the Photomechanical Effect via Supramolecular Assembly of Cross-Linked Azobenzene/Polymers.

Stimuli-responsive ion nanochannels have attracted considerable attention in various fields because of their remote controllability of ionic transportation. For photoresponsive ion nanochannels, however, achieving precise regulation of ion conductivity is still challenging, primarily due to the difficulty of programmable structural changes in confined environments. Moreover, the relationship between noncontact photo-stimulation in nanoscale and light-induced ion conductivity has not been well understood. In this work, a versatile design for fabricating guard cell-inspired photoswitchable ion channels is presented by infiltrating azobenzene-cross-linked polymer (AAZO-PDAC) into nanoporous anodic aluminum oxide (AAO) membranes. The azobenzene-cross-linked polymer is formed by azobenzene chromophore (AAZO)-cross-linked poly(diallyldimethylammonium chloride) (PDAC) with electrostatic interactions. Under UV irradiation, the trans-AAZO isomerizes to the cis-AAZO, causing the volume compression of the polymer network, whereas, in darkness, the cis-AAZO reverts to the trans-AAZO, leading to the recovery of the structure. Consequently, the resultant nanopore sizes can be manipulated by the photomechanical effect of the AAZO-PDAC polymers. By adding ionic liquids, the ion conductivity of the light-driven ion nanochannels can be controlled with good repeatability and fast responses (within seconds) in multiple cycles. The ion channels have promising potential in the applications of biomimetic materials, sensors, and biomedical sciences.

Phase Engineering via Aluminum Doping Enhances the Electrochemical Stability of Lithium-Rich Cobalt-Free Layered Oxides for Lithium-Ion Batteries.

Lithium-rich, cobalt-free oxides are promising potential positive electrode materials for lithium-ion batteries because of their high energy density, lower cost, and reduced environmental and ethical concerns. However, their commercial breakthrough is hindered because of their subpar electrochemical stability. This work studies the effect of aluminum doping on Li1.26Ni0.15Mn0.61O2 as a lithium-rich, cobalt-free layered oxide. Al doping suppresses voltage fade and improves the capacity retention from 46% for Li1.26Ni0.15Mn0.61O2 to 67% for Li1.26Ni0.15Mn0.56Al0.05O2 after 250 cycles at 0.2 C. The undoped material has a monoclinic Li2MnO3-type structure with spinel on the particle edges. In contrast, Al-doped materials (Li1.26Ni0.15Mn0.61-xAlxO2) consist of a more stable rhombohedral phase at the particle edges, with a monoclinic phase core. For this core-shell structure, the formation of Mn3+ is suppressed along with the material's decomposition to a disordered spinel, and the amount of the rhombohedral phase content increases during galvanostatic cycling. Whereas previous studies generally provided qualitative insight into the degradation mechanisms during electrochemical cycling, this work provides quantitative information on the stabilizing effect of the rhombohedral shell in the doped sample. As such, this study provides fundamental insight into the mechanisms through which Al doping increases the electrochemical stability of lithium-rich cobalt-free layered oxides.

Doping Regulation Stabilizing δ-MnO2 Cathode for High-Performance Aqueous Aluminium-ion Batteries.

δ-MnO2 is a promising cathode material for aqueous aluminium-ion batteries (AAIBs) for its layered crystalline structure with large interlayer spacing. However, the excellent Al ion storage performance of δ-MnO2 cathode remains elusive due to the frustrating structural collapse during the intercalation of high ionic potential Al ion species. Here, it is discovered that introducing heterogeneous metal dopants with high bond dissociation energy when bonded to oxygen can significantly reinforce the structural stability of δ-MnO2 frameworks. This reinforcement translates to stable cycling properties and high specific capacity in AAIBs. Vanadium-doped δ-MnO2 (V-δ-MnO2) can deliver a high specific capacity of 518 mAh g-1 at 200 mA g-1 with remarkable cycling stability for 400 cycles and improved rate capabilities (468, 339, and 285 mAh g-1 at 0.5, 1, and 2 A g-1, respectively), outperforming other doped δ-MnO2 materials and the reported AAIB cathodes. Theoretical and experimental studies indicate that V doping can substantially improve the cohesive energy of δ-MnO2 lattices, enhance their interaction with Al ion species, and increase electrical conductivity, collectively contributing to high ion storage performance. These findings provide inspiration for the development of high-performance cathodes for battery applications.

The stem cell niche transcription factor ETHYLENE RESPONSE FACTOR 115 participates in aluminum-induced terminal differentiation in Arabidopsis roots.

Aluminum-dependent stoppage of root growth requires the DNA damage response (DDR) pathway including the p53-like transcription factor SUPPRESSOR OF GAMMA RADIATION 1 (SOG1), which promotes terminal differentiation of the root tip in response to Al dependent cell death. Transcriptomic analyses identified Al-induced SOG1-regulated targets as candidate mediators of this growth arrest. Analysis of these factors either as loss-of-function mutants or by overexpression in the als3-1 background shows ERF115, which is a key transcription factor that in other scenarios is rate-limiting for damaged stem cell replenishment, instead participates in transition from an actively growing root to one that has terminally differentiated in response to Al toxicity. This is supported by a loss-of-function erf115 mutant raising the threshold of Al required to promote terminal differentiation of Al hypersensitive als3-1. Consistent with its key role in stoppage of root growth, a putative ERF115 barley ortholog is also upregulated following Al exposure, suggesting a conserved role for this ATR-dependent pathway in Al response. In contrast to other DNA damage agents, these results show that ERF115 and likely related family members are important determinants of terminal differentiation of the root tip following Al exposure and central outputs of the SOG1-mediated pathway in Al response.

The Quest for Stable Borozene Core in Main-Group Capped Inverse Sandwich Complexes, [(HE)2B6H6]2- (E=B, Al, Ga, In, and Tl).

The ubiquitous chemistry of benzene led us to explore ways to stabilise analogous borozene, by capping them with appropriate groups. The mismatch in overlap of ring-cap fragment molecular orbitals in [(HB)2B6H6]2- is overcome by replacing the two BH caps with higher congeners of boron. We calculated the relative energies of all the polyhedral structural candidates for [(HE)2B6H6]2- (E=Al-Tl) and found hexagonal bipyramid (HBP) to be more stable with Al-H caps. A global minimum search also gives HBP as the most stable structure for [Al2B6H8]2-. The capped B6H6 ring in [(HAl)2B6H6]2- has aromaticity comparable to that of benzene.

A New Structural Motif in Aggregation of Methylalumoxanes: Non-hydrolytic Route by the Alkylation of Dicarboxylic Acids.

Alumoxanes are typically produced via controlled hydrolysis of short-chain alkyl aluminium compounds which leads to oligomeric species that are usually difficult to obtain in crystalline form. Simultaneously, various alternative non-hydrolytic approaches to alumoxanes have also been used. In this work, we report on a new methylalumoxane scaffold derived from the alkylation of a series of dicarboxylic acids: itaconic acid (HO2CCH2C(=CH2)CO2H), succinic acid (HO2CCH2CH2CO2H) and homophthalic acid (HO2CCH2C6H4CO2H). The reactions of AlMe3 with a selected dicarboxylic acid in the molar ratio 4:1 conducted at elevated temperature occur with double methylation of each carboxylic group and provide to the formation of a new methylalumoxane aggregate, Me10Al6O4, flanked by methylaluminium diolate units. We also aimed to obtain dialkylaluminium derivatives of dicarboxylic acids by the controlled reaction of the appropriate acid with AlMe3 in the 1:2 stoichiometry. While the synthesis of organoaluminium derivatives of flexible aliphatic dicarboxylic acids (itaconic and succinic acids) is challenging due to their insolubility, the related homophtalate compound readily forms a molecular tetranuclear cluster, [(homophtalate)(AlMe2)2]2. The molecular and crystal structures of the resulting compounds were determined via NMR spectroscopic analysis and single crystal X-ray diffraction crystallography.

Spectroscopy and Photochemistry of [Al, N, C, O, H]: Connectivity to Aluminium-Bearing Species in the Universe.

Aluminium is one of the most abundant metals in the universe and impacts the evolution of various astrophysical environments. Currently detected Al-bearing molecules represent only a small fraction of the aluminium budget, suggesting that aluminium may reside in other species. AlO and AlOH molecules are abundant in the oxygen-rich supergiant stars such as VY Canis Majoris, a stellar molecular factory with 60+ molecules including the prebiotic NC-bearing species. Additional Al-bearing molecules with N, C, O, and H may form in O-rich environments with radiation-accelerated chemistry. Here, we present spectroscopic identification of novel aluminium-bearing molecules composed of [Al, N, C, O, H] and [Al, N, C, O] from the reactions of Al atoms and HNCO in solid argon matrix, which are potential Al-bearing molecules in space. Photoinduced transformations among six [Al, N, C, O, H] isomers and three [Al, N, C, O] isomers, along with their dissociation reactions forming the known interstellar species, have been disclosed. These results provide new insight into the chemical network of astronomically detected Al-bearing species in space.

Access to a peri-Annulated Aluminium Compound via C-H Bond Activation by a Cyclic Bis-Aluminylene.

Carbocyclic aluminium halides [(ADC)AlX2]2 (2-X) (X=F, Cl, and I) based on an anionic dicarbene (ADC=PhC{N(Dipp)C}2, Dipp = 2,6-iPr2C6H3) framework are prepared as crystalline solids by dehydrohalogenations of the alane [(ADC)AlH2]2 (1). KC8 reduction of 2-I affords the peri-annulated Al(III) compound [(ADCH)AlH]2 (4) (ADCH=PhC{N(Dipp)C2(DippH)N}, DippH=2-iPr,6-(Me2C)C6H3)) as a colorless crystalline solid in 76 % yield. The formation of 4 suggests intramolecular insertion of the putative bis-aluminylene species [(ADC)Al]2 (3) into the methine C-H bond of HCMe2 group. Calculations predict singlet ground state for 3, while the conversion of 3 into 4 is thermodynamically favored by 61 kcal/mol. Compounds 2-F, 2-Cl, 2-I, and 4 have been characterized by NMR spectroscopy and their solid-state molecular structures have been established by single crystal X-ray diffraction.

Influence of 3D Structural Design on the Electrochemical Performance of Aluminum Metal as Negative Electrode for Li-Ion Batteries.

Aluminum (Al) is one of the most promising active materials for producing next-generation negative electrodes for lithium (Li)-ion batteries. It features low density, high specific capacity, and low working potential, making it ideal for producing energy-dense cells. However, this material loses its electrochemical activity within 100 cycles, making it practically unusable. Several claims in the literature support the idea that a dual degradation mechanism is at play. First, the slow diffusion of Li in the Al matrix causes the electrochemical reactions to be partly irreversible, making the initial capacity of the cell drop. Second, the stress caused by cycling make the active material pulverize and lose activity. Recent work shows that shortening the diffusion path of Li by 3D structuring is an effective way to mitigate the first capacity loss mechanism, while alloying Al with other elements effectively mitigates the second one. In this work, we demonstrate that the benefits of 3D structuring and alloying are cumulative and that a mesh made of an Al-magnesium alloy performs better than both a pure Al foil and a foil of an Al-Mg alloy.

An aluminium adjuvant compound with ginseng stem leaf saponins enhances the potency of inactivated Pseudomonas plecoglossicida vaccine in large yellow croaker (Larimichthys crocea).

Large yellow croaker (Larimichthys crocea) farm industry in China suffered from huge economic loss caused by Pseudomonas plecoglossicida infection. Due to multi-antibiotic resistance, efficient vaccines are urgent to be developed to combat this pathogen. In this study, an inactivated vaccine was developed with an aluminium adjuvant (Alum) plus ginseng stem and leaf saponins (GSLS). As a result, the relative percentage survival (RPS) against P. plecoglossicida was up to 67.8 %. Comparatively, RPS of groups that vaccinated with only inactivated vaccine and vaccine containing Alum or Montanide™ 763A as adjuvant were 21.8 %, 32.2 % and 62.1 %, respectively. Assays for total serum protein and serum lysozyme activity in group vaccinated with inactivated vaccine plus Alum + GSLS adjuvant were significantly higher than that in control group. Moreover, specific antibody in serum elicited a rapid and persistent level. According to the expression of some immune related genes, inactivated vaccine plus Alum + GSLS adjuvant induced a stronger cellular immune response which was vital to defend against P. plecoglossicida. In conclusion, our study demonstrated that the compound Alum and GSLS adjuvant is a potential adjuvant system to develop LYC vaccine.

Dynamics of non-Newtonian methanol conveying aluminium alloy over a rotating disc: consideration of variable nanoparticle radius and inter-particle spacing.

The advancement of non-Newtonian nanofluid innovation is a crucial area of research for physicists, mathematicians, manufacturers, and materials scientists. In engineering and industries, the fluid velocity caused by rotating device and nanofluid has a lot of applications such as refrigerators, chips, heat ex-changers, hybrid mechanical motors, food development, and so on. Due to the tremendous usage of the non-Newtonian nanofluid, the originality of the current study is to explore the influence of nanoparticle radii and inter-particle spacing effects on the flow characteristics of Casson methanol-based aluminium alloy (AA7072) nanofluid through a rotating disc with Joule heating and magnetic dipole. The present problem is modeled in the form of partial differential equations (PDEs), and these PDEs are converted into ordinary differential equations with the help of suitable similarity transformations. The analytical solution to the current modeled problem has been obtained by using the homotopy analysis method (HAM) and numerical solutions are obtained by employing Runge-Kutta-Fehlberg method along with shooting technique. The main purpose of the present research work is to analyze the behavior of the velocity and temperature of the nanofluid for small and large radius of the aluminium alloy (AA7072) nanoparticles and inter-particle spacing. The radial and tangential velocities are enhanced due to rising ferro-hydrodynamic interaction parameter and the skin friction force for radial and tangential directions are enhanced 10.51% and 2.16% whenh= 0.5. Also, the heat transfer rate is reduced 18.71% and 16.70% whenh= 0.5% andRp= 1.5. In fact, the present results are compared with the published results and they met good agreement.

ZnO-Salen NPs Employed as Chemosensor for Detection of Al3+ and K+ in Aqueous Medium, Developing Human Cell Images.

ZnO nanoparticles (NPs) were prepared and characterized by different analytical methods and then they were used to decorate with N, N´-bis(salicylidene)ethylenediamine (salen) in order to perform as receptor for the metal ions in an aqueous medium. The results show that ZnO-salen selectively detects Al3+ ions in aqueous medium since the intensity of fluorescence has been enhanced significantly. However, the presence of K+ in the medium further intensified the fluorescence emission for the [ZnO-salen-Al3+] system. The above system has been applied to recognize Al3+ and K+ in cells by developing the cell images, for which, the fluorescence image is brightened if a human glioblastoma U251 cell contains [ZnO-salen-Al3+] + K+ ions, consisting of the fluorescence titration. The binding global constant for Al3+ and the subsequent recognition of K+ by ZnO-salen resulted in ß2(Al3+) = 6.61 × 103 and ß2(K+) = 3.71 × 103 with a detection limit of 36.51 µM for Al3+ and 17.39 µM for K+. In the cell toxicity analysis, the cell viability was over 85% for the ZnO-salen even in the concentration as high as 100 mM.

Aluminium-doped Carbon Dots for the Simultaneous Selective Detection of Five Tetracycline Antibiotics.

In this paper, the aluminium-doped carbon dots (Al-CDs) were developed for simultaneous selective detection of five tetracycline antibiotics (TCs), including minocycline (MC), tetracycline (TC), oxytetracycline (OTC), doxycycline (DOC) and chlortetracycline (CTC). With the bright blue fluorescence, Al-CDs displayed excellent stability and showed no obvious fluorescence intensity changes under different ionic strength, acidic or alkaline environment, continuous ultraviolet light illumination, and even longtime storage at room temperature. As adding different antibiotics, the fluorescence of Al-CDs was strongly quenched by five TCs and showed no distinguished changes with the addition of other kinds of antibiotics. The presence of interferential metal ions, anions and small organic molecules imposed no effect on the simultaneous selective detection of five TCs. A good linear relationship was achieved for five TCs in the range of 0-100 µM, and the limit of detection for MC, TC, OTC, DOC, and CTC were 13.91 (0-100 µM), 15.54 (0-100 µM), 14.26 (0-100 µM), 13.48 (0-100 µM) and 13.88 nM (0-100 µM), respectively. Moreover, Al-CDs was successfully used to the detection of five TCs in real samples with recovery ranging from 92.47% to 122.05%, confirming a bright future for the practical applications in the assays of foods, medicines, and environments.

A Novel AIE-Active Salicylaldehyde-Schiff Base Probe with Carbazole Group for Al3+ Detection in Aqueous Solution.

A donor-acceptor Schiff-base fluorescent probe BKS with chelation enhanced fluorescence (CHEF) mechanism was designed and synthesized via benzophenone(Acceptor), salicylaldehyde and carbazole(Donor) for Al3+ detection, which exhibited typical aggregation-induced emission (AIE) characteristic. BKS probe could provide outstanding selectivity to Al3+ with a prominent fluorescence "turn-on" at 545 nm in a wide pH range from 2 to 11. By the Job's plot, the binding stoichiometry ratio of probe BKS to Al3+ was determined 1:1. The proposed strategy offered a very low limit of detection at 1.486 µM in THF/H2O(V/V = 1:4, HEPBS = 10 mM, pH = 7.40), which was significantly lower than the standard of WHO (Huang et al., Microchem J 151:104195, 2019)-(Yongjie Ding et al., Spectrochim Acta Mol Biomol Spectrosc 167:59-65, 2021) guidelines for drinking water. BKS probe could provide a wider linear detection range of 50 to 500 µM. Furthermore, the probe could hardly be interfered by other examined metal ions. The analysis of Al3+ in real water samples with appropriate recovery (100.72 to 102.85) with a relative standard deviation less than 2.82% indicated the accuracy and precision of BKS probe and the great potential in the environmental monitoring of Al3+.

Mapping elemental solutes at sub-picogram levels during aqueous corrosion of Al alloys using diffusive gradients in thin films (DGT) with LA-ICP-MS.

A novel approach using diffusive gradients in thin films (DGT) with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) for two-dimensional mapping of elemental solute release at sub-picogram levels during aqueous corrosion of Al alloys is presented. Evaluation of different DGT gels with mixed micro-sized binding phases (polyacrylamide-Chelex-Metsorb, polyurethane (PU)-Chelex-Metsorb, PU-Chelex-Zr(OH)4) demonstrated the superior performance of PU gels due to their tear-proof handling, low shrinkage, and compliance with green chemistry. DGT devices containing PU-Chelex-Zr(OH)4 gels, which have not been characterized for Al sampling before, showed quantitative uptake of Al, Zn, and Cu solutes over time (t = 4-48 h) with higher Al capacity (ΓDGT = 6.25 µg cm-2) than different gels. Application of PU-Chelex-Zr(OH)4 gels on a high-strength Al-Cu alloy (Al2219) exposed to NaCl (w = 1.5%, pH = 4.5, T = 21 °C) for 15 min in a novel piston-type configuration revealed reproducible patterns of Al and Zn co-solubilization with a spatial expansion ranging between 50 and 1000 µm. This observation, together with complementary solid-state data from secondary electron microscopy with energy-dispersive X-ray spectroscopy, showed the presence of localized pitting corrosion at the material surface. Detection limits for total solute masses of Al, Zn, and Cu were ≤0.72 pg, ≤8.38 pg, and ≤0.12 pg, respectively, for an area of 0.01 mm2, demonstrating the method's unique capability to localize and quantify corrosion processes at ultra-trace levels and high resolution. Our study advances the assessment of Al alloy degradation in aqueous environments, supporting the design of corrosion-resistant materials for fostering technological safety and sustainability.

Prenatal double-hit with aluminium and cadmium mediate testicular atrophy and hypothalamic hypoplasia: the role of oxido-nitrergic stress and endocrine perturbations.

There is limited experimental evidence on the biochemical consequences of aluminium (Al) and cadmium (Cd) co-exposures during pregnancy and postnatal life.This study investigated the impacts of perinatal Al chloride (AlCl3) and Cd chloride (CdCl2) co-exposures on neuroendocrine functions in mice offspring during postnatal life. The study comprised of four pregnant experimental groups. Group 1 received AlCl3 (10 mg/kg), group 2 were administered CdCl2 (1.5 mg/kg), while group 3 received both AlCl3 (10 mg/kg) and CdCl2 (1.5 mg/kg) (AlCl3+CdCl2), and group 4 received saline (10 mL/kg) only and served as control group. All experimental animals were chemically exposed once daily from gestation days 7-20. Upon delivery, male pups were regrouped based on maternal chemical exposure on postnatal day 21 (PND 21) and allowed to grow to adulthood until PND 78, after which they were sacrificed for assessment of neuroendocrine markers and histological investigations. There was no statistical significance (p > 0.05) on follicle stimulating hormone, testosterone, estrogen and progesterone, thyroid stimulating hormone, thyroxine (T4) in all treatment groups relative to controls|. However, AlCl3 and AlCl3-CdCl2 significantly (p < 0.05) reduced triiodothyronine (T3) levels, with a profound increase in T3:T4 ratio by AlCl3, and AlCl3+CdCl2 compared to control. Furthermore, pups from pregnant mice treated with CdCl2 and AlCl3+CdCl2 demonstrated increased testicular malondialdehyde concentration with increased catalase activity relative to controls, suggesting oxidative imbalance. In addition, AlCl3, CdCl2, and AlCl3+CdCl2 exposures induced testicular and hypothalamic architectural disruption compared to controls, with marked architectural derangement in the AlCl3+CdCl2 group. Our findings suggest that prenatal co-exposures to Alcl3 and CdCl2 induce testicular and hypothalamic alterations in offspring via a testicular oxidative stress and thyrotoxicosis-dependent mechanisms.

Impact of welding occupation on serum aluminium level and its association with physical health, cognitive function, and quality of life: a cross-sectional study.

OBJECTIVE: There is an occupational health concern about welders' inhalation of toxic aluminium fumes. We investigated whether serum aluminium level (SAL) and demographic variables can significantly predict physical health parameters, cognition, and quality of life (QoL) among welders. METHODS: The cross-sectional study involved 100 age- and location-matched men (50 welders and 50 non-welders). SAL obtained using a graphite furnace atomic absorption spectrometer, and data collected using blood pressure and body mass index (BMI) apparatuses, biodata form, pain rating scale, General Practitioner Assessment of Cognition, WHOQoL-BREF, and Nordic musculoskeletal symptoms (MSS) questionnaire were analysed using independent samples t test, chi-square, Pearson's correlation, and hierarchical linear regression. RESULTS: Welders had significantly higher SAL (mean difference [MD] = 1.77 µg/L, p < 0.001), lower QoL (MD = 3.92, p = 0.039), and higher prevalence of MSS on the neck (χ2 = 10.187, p = 0.001), shoulder (χ2 = 9.007, p = 0.003), upper back (χ2 = 6.832, p = 0.009), and knee (χ2 = 12.190, p < 0.001) than non-welders. There was a significant bivariate association between SAL, systolic blood pressure (ß = 0.313, p = 0.002), and BMI (ß = 0.279, p = 0.005), but not pain intensity, cognition, or QoL. SAL remained a significant predictor of systolic blood pressure after adjustment for physical health and QoL parameters (ß = 0.191, p = 0.044). The association between SAL and social QoL became significant after adjustment for physical health and other QoL domains (ß = - 0.210, p = 0.032) and demographic variables (ß = - 0.233, p = 0.046). CONCLUSION: Welders had significantly higher SAL, musculoskeletal symptoms, blood pressure, and lower QoL than non-welders. SAL was associated with adverse physical health parameters and social-related QoL, not cognition. We recommend routine aluminium bioavailability and physical health checks among welders.

Association between atopic disease and vaccination granulomas: A nested case-control study.

BACKGROUND: Vaccination granulomas are observed in 1% of all children vaccinated with an aluminium-adsorbed vaccine. Most children with granulomas also have aluminium contact allergy (CA). CA and atopic diseases are both highly prevalent among children and may be associated. OBJECTIVE: To investigate the association between vaccination granulomas and atopic dermatitis (AD), asthma and rhinitis in children. METHODS: We sourced a cohort of all Danish children born from 2009 to 2017 and conducted a nested case-control study, with cases defined as children with vaccination granulomas, matched to controls 1:10 on sex, socioeconomic class, gestational age and season of birth. All cases and controls were vaccinated with aluminium-adsorbed vaccines and followed until their second birthday. We used conditional logistic regression to estimate the odds ratios (ORs). RESULTS: The study included 2171 cases with vaccination granulomas, and 21 710 controls. Children with a diagnosis of AD had a significantly higher risk of a vaccination granuloma (OR 1.50, 95% confidence intervals [CI] 1.25-1.80). No significant association was found between granulomas and asthma or rhinitis. The association between granulomas and AD was even higher in an additional sensitivity-analysis, following the children until their fourth birthday (OR 2.71, 95% CI 2.36-3.11). CONCLUSION: AD was significantly associated with vaccination granulomas, but not with other atopic diseases, within both the first 2 and 4 years of life.