RESUMEN
Distal ulna locking bone plates (DLBPs) are commonly employed in the treatment of distal ulna fractures. However, commercially available metallic bone plates experience stress shielding and lack corrosion resistance. Poly lactic acid (PLA) is highly favored biopolymer due to its biocompatible and bioabsorbable nature with human tissues. The use of additive layer manufacturing (ALM) is gaining attention for creating customized implants with intricate structures tailored to patient autonomy. ALM-based PLA bone plates must provide high resistance against impact and torsional forces, necessitating the adjustment of printing process parameters. This study focuses on examining the influence of key printing parameters, on the impact strength and torque-withstanding capability of DLBPs. Experimental results, along with microscopic images, reveal that an increase in infill density (IF) and wall thickness imparts strong resistance to layers against crack propagation under impact and torsional loads. On the contrary, an increase in layer height and printing speed leads to delamination and early fracture of layers during impact and torsional testing. IF significantly contributes to improving the impact strength and torque-withstanding capability of DLBPs by 70.53% and 80.65%, respectively. The study highlights the potential of the ALM technique in developing DLBPs with sufficient mechanical strength for biomedical applications.
RESUMEN
Fixation methods for posterior malleolar fracture (PMF) are a source of great controversy. This study aims to compare complications, clinical and radiological outcomes between PA screws and posterior plate in PMF using current literature. A systematic search strategy was conducted following the PRISMA protocol. Medline (PubMed), Embase (Elsevier), and Lilacs databases were used to identify complication rates (infection, non-union, loss of reduction, osteoarthrosis, and sural nerve injury) and to compare reported functional outcomes. The level of evidence in the articles was assessed using the GRADE tool. The studies eligible for meta-analysis were processed using The Review Manager version 5.4.1 software. Twelve articles met the inclusion criteria; five articles were included for subgroup meta-analysis. Overall infection rate, loss of reduction and sural nerve injury were each 2%. Osteoarthritis rate was 10%. There was no difference in risk reduction for infection rate (RD= 0.01; 95% CI: -0.03 - 0.06; p= 0.50), loss of reduction (RD= - 0.00; 95 CI: -0.03 - 0.03; p= 0.88), sural nerve injury (RD= 0.01; 95% CI:-0.03 - 0.04; p= 0.70), osteoarthrosis (RD= -0.00; 95% CI: -0.09 - 0.09; p= 0.97), functional (MD= 0.70; 95% CI: -1.06 - 2.45; p= 0.44) or pain scores (MD= 0.12; 95% CI: -0.31 - 0.55; p= 0.58), nor deficit in dorsiflexion (MD= -0.26; 95% CI: -1.64 - 1.12; p= 0.71). There were no clinical nor radiological significant differences when comparing fixation of PMF with plates or PA screws. With current literature it is not possible to establish the superiority of either fixation.
RESUMEN
PURPOSE: There are two main surgical fixation methods for the posterior malleolar fractures (PMFs), the anterior-to-posterior (AP) screws or via the posterolateral (PL) approach utilizing a buttress plate. This review aims to compare the clinical outcome between the AP screw fixation and the PL plate fixation for treating PMFs. METHODS: We searched all relevant publications about PMFs treated with AP screws or PL plates through electronic databases including the PubMed, the Cochrane Library, the Embase, the Wiley online library and the Web of Science. The meta-analysis was conducted to evaluated clinical outcomes including reduction quality, post-operative function and complications. RESULTS: Six studies (one single randomized controlled trial and five retrospective cohort studies) were enrolled. 172 patients underwent AP screw fixation and 214 patients underwent PL plate fixation with a total of 386 patients (169 males and 217 females). The PL plating group yielded better AOFAS scores(MD = 6.97, 95 % CI=[4.68, 9.27], Pï¼0.00001, I2 =0 %) and was more likely to achieve excellent anatomical reduction(OR=5.49, 95 % CI=[1.06, 28.42], P = 0.04, I2 =80 %). No differences were found in the bad reduction quality, incidences of complications (arthritis, neuralgia, superficial wound healing problems and implant failure), the walking VAS scores and the dorsiflexion restriction degrees. CONCLUSION: We suggest that the PL plate fixation method has the clinical benefit of achieving anatomical reduction and better AOFAS scores over the AP screw fixation for treating PMFs. No differences were found in the incidences of complications ( arthritis, neuralgia, superficial wound healing problems and implant failure), the walking VAS scores and the dorsiflexion restriction degrees. The posterior approach and the direct reduction are recommended for the treatment of the PMFs. LEVEL OF CONFIDENCE: â ¡b.
RESUMEN
INTRODUCTION: Scaphoid fractures represent 5-10% of nonunion rate and the treatment options consist of an open reduction with correction of deformity, restoration of the scaphoid length with autologous wedge grafting and fixation. However, there is still no consensus in the literature on the best fixation method. Therefore, the purpose of the study is to compare plate fixation and screw fixation in treating scaphoid nonunion with humpback deformity and carpal instability. METHODS: Prospective, non-randomised study comparing the treatment of two groups of patients with scaphoid nonunion. A total of 19 patients were included in the study, the first ten patients were included in group 1 (plate fixation), subsequently nine patients were included in group 2 (screw fixation). The nonunion duration was longer than 6 months and patients did not present type III Scaphoid Nonunion Advanced Collapse (SNAC). Clinical evaluations included pain intensity, range of motion, grip strength, pinch test and functional scales Disabilities of the Arm, Shoulder and Hand (DASH) and Mayo Wrist Score. Radiographic evaluations consisted of radiographs of both wrists in AP, AP with ulnar deviation, lateral and oblique views. Patients further underwent a tomography of the affected wrist for bone deformity, carpal collapse and later consolidation evaluation. RESULTS: According to post-operative measurements, group 1 showed a significant improvement in the scapholunate angle (p = 0.011) and in the intrascaphoid angle (p = 0.002). Group 2 only showed an improvement in the scapholunate angle (p = 0.011). All patients in group 1 achieved consolidation in 8 weeks, while group 2 patients had a slower consolidation, with a mean of 14 weeks and standard deviation (SD) of 4.2, with statistical significance (p = 0.006). CONCLUSION: Our prospective study, despite the limitations, contributes to the literature for demonstrating a better fixation using plate, with a better correction of humpback deformity and Dorsal Intercalated Segment Instability (DISI) and a faster consolidation. LEVEL OF EVIDENCE: II, therapeutics studies; prospective comparative study.
Asunto(s)
Hueso Escafoides , Extremidad Superior , Humanos , Estudios Prospectivos , Hueso Escafoides/diagnóstico por imagen , Hueso Escafoides/cirugía , Muñeca , Tornillos ÓseosRESUMEN
OBJECTIVE: An inferior pole fracture of the patella requires surgical treatment to restore the knee extension mechanism of the knee joint. Different from other types of patellar fractures, inferior pole fractures are usually comminuted, and other traditional fixation methods, such as tension band wiring, may not meet the fixation needs. We propose fixing inferior pole fractures of the patella with a custom-made anchor-like plate combined with cerclage and report the surgical outcomes. MATERIAL AND METHODS: This is a retrospective clinical study. From June 2018 to August 2020, 21 patients with inferior patella fracture treated at Hong Hui Hospital Affiliated to Xi'an Jiaotong University received a custom-made anchor-like plate combined with cerclage. Complications of the surgical fixation methods and final knee function were used as the main outcome measures. RESULTS: All fractures achieved good union, and the union time ranged from 8 to 12 weeks. No patients had serious complications, such as internal fixation failure or infection. The average duration of surgery of patients was 75.05 7.26 min, and the intraoperative blood loss was 60.099.49 ml. At the last follow-up, the range of motion of the knee was 120°-140°, with an average of 131.436.92°, the Bostman score was 27-30, and the Lysholm score ranged from 82 to 95. All patients showed good knee function one year after the operation. CONCLUSION: We used a modified T-shaped plate combined with cerclage technology to fix inferior fractures pole of the patella, providing reliable fixation, allowing early functional exercise of the knee joint, and providing patients with good knee joint function after surgery.
Asunto(s)
Fracturas Óseas , Fracturas Conminutas , Traumatismos de la Rodilla , Placas Óseas , Hilos Ortopédicos , Fijación Interna de Fracturas/métodos , Fracturas Óseas/diagnóstico por imagen , Fracturas Óseas/cirugía , Fracturas Conminutas/cirugía , Humanos , Rótula/diagnóstico por imagen , Rótula/cirugía , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
BACKGROUND: Combined medial and lateral plate fixation is recommended for complex tibial plateau fractures with medial fragments or no cortical bone contact. Although such fixation is adequate to resist forces during range of motion, it may be insufficient to support immediate postoperative weightbearing. Here, we analyzed displacement, stiffness, and fixation failure during simulated full weightbearing of bicondylar tibial plateau fractures treated with combined medial and lateral locking plate fixation. METHODS: We used 10 fresh-frozen adult human cadaveric tibias and mated femurs. Osteotomies were performed with an oscillating saw and cutting template to simulate an AO Foundation and Orthopaedic Trauma Association (AO/OTA) 41-C2 fracture (simple articular, multifragmentary metaphyseal fracture). Specimens were anatomically reduced and stabilized with combined medial and lateral locking plates (AxSOS, Stryker, Mahwah, NJ). Specimens were loaded axially to simulate 4 weeks of walking in a person weighing 70 kg. The specimens were cyclically loaded from 200 N to a maximum of 2800 N. Then, if no failure, loading continued for 200,000 cycles. We measured displacement of each bone fragment and defined fixation failure as ≥5 mm of displacement. Construct stiffness and load at failure were calculated. Categorical and continuous data were analyzed using Chi-squared and unpaired t-tests, respectively. RESULTS: Mean total displacement values after 10,000 loading cycles were as follows: lateral, 0.4 ± 0.8 mm; proximal medial, 0.3 ± 0.7 mm; distal medial, 0.3 ± 0.6 mm; and central 0.4 ± 0.5 mm. Mean stiffness of the construct was 562 ± 164 N/mm. Fixation failure occurred in 6 of 10 specimens that reached 5 mm of plastic deformation before test completion. In the failure group, the mean load at failure was 2467 ± 532 N, and the mean number of cycles before failure was 53,155. After test completion, the greatest displacement was found at the distal medial fracture site (2.3 ± 1.4 mm) and lateral fracture site (2.2 ± 1.7 mm). CONCLUSIONS: Although combined medial and lateral plate fixation of complex tibial plateau fractures provides adequate stability to allow early range of motion, immediate full weightbearing is not recommended.
Asunto(s)
Fijación Interna de Fracturas , Fracturas de la Tibia , Adulto , Fenómenos Biomecánicos , Placas Óseas , Humanos , Fracturas de la Tibia/diagnóstico por imagen , Fracturas de la Tibia/cirugía , Soporte de PesoRESUMEN
PURPOSE: We performed a biomechanical analysis using the finite element method to assess the effects of plate length and the number of screws on construct stiffness, stress distribution, and fracture displacement in the fixation of type A2 distal humerus fractures. METHODS: A 3-dimensional humerus model was constructed using computed tomography of a healthy man. After creating a 2-mm extra-articular fracture gap, orthogonal double-plate fixation was performed with an incremental increase in plate length and the number of screws, creating 17 fixation models. Four screws were placed in each plate's distal segment, and the number of screws was increased incrementally in the segment proximal to the fracture, starting from 2 in the medial (M) and 2 in the lateral (L) plate (M2∗L2). RESULTS: The fifth screw proximal to the fracture in the lateral plate (L5) played an essential role in increasing stiffness under bending, axial, and torsional forces surpassing the intact bone, which may have been due to the bypassing of the stress riser area. Minimum construct stiffness was created when 5 (M3∗L2) screws were inserted into the proximal segment. For bending forces, the M4∗L2 construct was stronger than M3∗L3 (total 6 proximal screws), and M5∗L3 was stronger than M4∗L4 (total 8 proximal screws), showing higher stiffness when the plates ended at different levels. The M4∗L2 construct (6 screws) had stiffness comparable with M4∗L3, M4∗L4, and M5∗L4 during bending, showing comparable stiffness with the least instrumentation density. CONCLUSION: Our findings suggested M3∗L5 as the optimum and M3∗L2 as the minimum construct to resist all bending, axial and torsional forces. CLINICAL RELEVANCE: Applying the results may improve surgical techniques, decrease the rate of complications, including fixation failure and nerve injury, and optimize the time of surgery. Moreover, hardware removal is less cumbersome with fewer screws.
Asunto(s)
Placas Óseas , Fijación Interna de Fracturas , Fenómenos Biomecánicos , Tornillos Óseos , Análisis de Elementos Finitos , Fijación Interna de Fracturas/métodos , Humanos , Húmero , MasculinoRESUMEN
BACKGROUND: Because of the irregular shape of the scapula and the different types of fractures, a standard internal fixation device is lacking in clinical practice, even though there are many options available. This study aimed to compare the therapeutic efficacy of titanium anatomic and reconstructive plates for extra-articular fractures of the scapula (Miller types IIb, IIc, and IV). METHODS: A retrospective study of 41 patients who underwent treatment for extra-articular fractures of the scapula between March 2017 and March 2020 was conducted. Patients were divided into 2 groups based on the fixation device: titanium anatomic plate group (20 patients) and titanium reconstructive plate group (21 patients). After follow-up for 12-18 months, the general characteristics, perioperative characteristics, postoperative follow-up findings, and imaging data of the 2 groups were compared. RESULTS: The surgical procedures were uneventful in both groups. The anatomic plate group significantly outperformed the reconstructive plate group with respect to surgical duration and intraoperative blood loss (P < .001). At 3-month postoperative follow-up, the Constant-Murley score (P = .026), shoulder flexion range of motion, and shoulder abduction range of motion in the anatomic plate group were all significantly better than those in the reconstructive plate group (P < .001). The postoperative Western Ontario Shoulder Instability scores of the 2 groups were similar. Imaging showed functional recovery and stable and reliable fixation in both groups. Time to bone union was similar in both groups (9.10 ± 1.25 weeks in anatomic plate group and 9.24 ± 1.41 weeks in reconstructive plate group, P = .742). No complications occurred in any patient, such as fixation failure, instability, or bone nonunion. CONCLUSION: Surgeons should favorably consider titanium anatomic plates for the treatment of extra-articular scapular fractures owing to their clear efficacy associated with a shorter surgical time, less intraoperative blood loss, better fixation, and rapid short-term functional recovery.
Asunto(s)
Fracturas Óseas , Inestabilidad de la Articulación , Articulación del Hombro , Pérdida de Sangre Quirúrgica , Placas Óseas , Fijación Interna de Fracturas/métodos , Fracturas Óseas/cirugía , Humanos , Rango del Movimiento Articular , Estudios Retrospectivos , Escápula/diagnóstico por imagen , Escápula/cirugía , Articulación del Hombro/diagnóstico por imagen , Articulación del Hombro/cirugía , Titanio , Resultado del TratamientoRESUMEN
OBJECTIVE: The primary goal of maxillary alveolar cleft reconstruction in patients with cleft lip/palate at the phase of mixed dentition is to build bone in the cleft area which in turn allows closure of the oronasal fistula, establishes arch continuity, and improve maxillary stability. This study aimed to evaluate the double iliac corticocancellous bone plates grafting technique for initial alveolar cleft grafting. DESIGN: This prospective study was conducted on 12 consecutive patients with unilateral complete alveolar cleft and previous cleft lip and palate corrective surgery. INTERVENTION: For all patients, the iliac crest graft was harvested and cut into 2 cortical bone plates and adapted labially and palatally. Both plates were fixed with screws then the gap between the 2 plates was filled with cancellous bone. The grafted side was compared to the contralateral side 9 months postoperatively regarding labio-palatal alveolar width and bone density, while the 9 months postoperative graft height was compared to the immediate postoperative height using computed tomography scans. RESULTS: All grafted sides showed similarity to the contralateral sides regarding both alveolar width and bone density with minimal crestal bone resorption. CONCLUSION: The double iliac corticocancellous bone plate grafting technique seems to be a reliable method for alveolar cleft reconstruction with adequate bone quality and contour.
Asunto(s)
Injerto de Hueso Alveolar , Labio Leporino , Fisura del Paladar , Placas Óseas , Trasplante Óseo/métodos , Labio Leporino/diagnóstico por imagen , Labio Leporino/cirugía , Fisura del Paladar/diagnóstico por imagen , Fisura del Paladar/cirugía , Dentición Mixta , Humanos , Ilion/trasplante , Estudios ProspectivosRESUMEN
OBJECTIVE: To investigate the effect of different types of transverse sinus stenosis on blood flow patterns in the ipsilateral superior curve of the sigmoid sinus. METHODS: According to the morphology of transverse and sigmoid sinus sections in pulsatile tinnitus patients, ten idealized models with different degrees and positions of transverse sinus stenosis were constructed. Computational fluid dynamics simulations were performed to compare the hemodynamic characteristics among these models. Follow-up images of previous cases were included, which preliminarily confirmed the hypothesis that bone plate erosion of the sigmoid sinus sulcus is related to blood flow impingement. RESULTS: Blood flow impingement on the superior curve of the sigmoid sinus wall intensified with increasing degree of stenosis and decreased with increasing distance between the stenosis and the sigmoid sinus. The impact zone was generally confined to the anterior and lateral walls of the superior curve of the sigmoid sinus. When the stenosis was located far from the middle of the transverse sinus, the blood flow impingement on the sigmoid sinus wall was very weak. CONCLUSIONS: When stenosis is located far from the sigmoid sinus, the causes of tinnitus should be comprehensively considered instead of assuming that stenosis is the main cause. Bone plate erosion of the sigmoid sinus sulcus was promoted by blood flow impingement. KEY POINTS: ⢠Ten idealized models with different degrees and positions of stenosis were constructed. ⢠The causes of pulsatile tinnitus should be comprehensively considered. ⢠Sigmoid sinus plate dehiscence was promoted by blood flow impingement.
Asunto(s)
Hidrodinámica , Acúfeno , Constricción Patológica/diagnóstico por imagen , Senos Craneales/diagnóstico por imagen , Hemodinámica , HumanosRESUMEN
Treatment of skeletal Class III malocclusion in young patients is very challenging. Facemask therapy has been proven to be effective in early correction of Class III malocclusion. With the aid of skeletal anchorage, the orthopaedic effects are expected to be greater than the effects with conventional facemask with tooth-borne anchorage. However, only a few studies have reported on the long-term stability of facemask therapy combined with skeletal anchorage. This report examines two patients with skeletal Class III malocclusion who were treated with facemask and skeletal anchorage followed by orthodontic treatment using fixed orthodontic appliances. The long-term effects of facemask therapy with skeletal anchorage are discussed and compared with the conventional facemask therapy.
Asunto(s)
Maloclusión de Angle Clase III , Métodos de Anclaje en Ortodoncia , Cirugía Ortognática , Cefalometría , Aparatos de Tracción Extraoral , Humanos , Maloclusión de Angle Clase III/terapia , Máscaras , Maxilar , Técnica de Expansión PalatinaRESUMEN
Objective: To explore the outcomes after treatment of the complex bicondylar tibial plateau fracture through a midline longitudinal approach. Methods: A review of fifteen patients with an average age of (51.3±12.3) years old (range17-65yers;7 males, 8 females) surgically treated from October 2013 to Febuary 2018 were included. Sahatker â ¤ in 10, Sahatker â ¥ in 5; fractures of medial and lateral columns in 9, fractures of three columns in 6. All the patients were adopt a midline longitudinal approach combined with the posterior approach and bone grafting were conducted. Results: All cases were followed-up for (14.4±3.8) month, with an average of 12-24 month. All patients gained bone union during 12-16 weeks after operation, with an average of (15.2±1.3) weeks. There were significant differeces in both tibial plateau angle and posterior slope angle on radiography between preoperation and postoperation (P<0.05), there were no significant differeces in either tibial plateau angle or posterior slope angle on radiography between immediate postoperation and 12 months postoperation (P>0.05). At final follow-up,both the Lachman test and the Pivot-shift test were negative. All patients had complete knee extension, knee flexion angle 100°-135°, with an average of 117.7°±11.3°. The HSS (the Hospital for Special Surgery) score were 66-98, with an average of 85.1±9.3, six cases were excellent and seven cases were good, two cases was fair, the excellent and good rate was 86.7%. The Rasmussen radiological evaluationre were 9-18, with an average of 15.1±2.5, three cases were excellent and eleven cases were good, one cases was fair, the excellent and good rate was 93.3%. 1 patient had fat liquefactionof in antero incision, and got good outcomes after debridement dressing. Conclusion: The treatment of the complex bicondylar tibial plateau fracture through a midline longitudinal approach combined with the posterior approach can result in good exposure and satisfying knee function in short-term.
Asunto(s)
Fracturas de la Tibia , Adolescente , Adulto , Anciano , Placas Óseas , Femenino , Fijación Interna de Fracturas , Humanos , Articulación de la Rodilla , Masculino , Persona de Mediana Edad , Tibia , Fracturas de la Tibia/cirugía , Resultado del Tratamiento , Adulto JovenRESUMEN
Locking intramedullary nails and locking plates are widely used. There is a lack of consensus about optimal surgical treatment. We compare these techniques. This retrospective study included 97 patients : 51 with nail, 46 with plate. Absolute and relative Constant-Murley scores and Simple Shoulder Test (SST) were used to assess postoperative function. Time of fracture union and complications were recorded. Two fragment fractures were preferentially treated by nails and 4 fragment fractures by plates. There is no difference for union except advantage for nails in 2 fragment fractures. The functional outcome is similar, relative Constant-Murley score is 72,7 ± 0,3 %, SST 6,7 ± 3,9 after nailing and relative Constant-Murley score is 65,4 ± 0,3 %, SST 6,0 ± 3,6 after plating. Number of complications is similar after plating (67,4 %) and nailing (62,7 %). We propose to promote nailing for 2 fragment fractures and treatment with plates for 4 fragment fractures. Three fragment fractures can be treated by both techniques.
L'ostéosynthèse par enclouage et par plaque sont répandus dans le traitement des fractures de l'humérus proximal. Il n'y a pas de consensus concernant le traitement chirurgical optimal. Nous avons comparé ces deux techniques. Cette étude rétrospective comprend 97 patients : 51 enclouages, 46 traitements par plaque. Les scores de Constant-Murley absolu et relatif et le Simple Shoulder Test (SST) ont été utilisés pour évaluer la fonction. Le temps de consolidation et les complications ont été évalués. Les fractures 2 fragments ont été préférentiellement enclouées et les 4 fragments traitées par plaque. Il n'y a pas de différence si ce n'est un temps de consolidation plus court après enclouage pour les fractures 2 fragments. Le résultat fonctionnel est similaire, le score de Constant-Murley relatif est de 72,7 ± 0,3 % et le SST de 6,7 ± 3,9 après enclouage. Le score de Constant-Murley relatif est de 65,4 ± 0,3 % et le SST 6,0 ± 3,6 après ostéosynthèse par plaque. Le nombre de complications est équivalent entre le traitement par plaque (67,4 %) et par clou (62,7 %). Nous proposons de favoriser l'ostéosynthèse par enclouage pour les fractures 2 fragments et par plaque pour les fractures 4 fragments. Les fractures 3 fragments peuvent être traitées selon le choix du chirurgien.
Asunto(s)
Clavos Ortopédicos , Fracturas del Hombro , Placas Óseas , Fijación Interna de Fracturas , Humanos , Estudios Retrospectivos , Fracturas del Hombro/diagnóstico por imagen , Fracturas del Hombro/cirugía , Resultado del TratamientoRESUMEN
BACKGROUND: Fixed-angle locking compression plate (LCP) and variable-angle LCP are utilized for internal fixation of Lisfranc injuries. However, studies regarding the difference of clinical outcomes of these two plates are limited. The purpose of present study was to compare postoperative outcomes between these two plate types in Lisfranc injuries. METHODS: A total of 45 consecutive patients (22 patients with fixed-angle LCP and 23 patients with variable-angle LCP) who underwent surgical treatment for Lisfranc injury were reviewed for this retrospective study. The Foot Function Index (FFI), numerical rating scale (NRS) for pain, development of complications, operative time, and patient satisfaction for current activity were compared. RESULTS: There were no significant differences in FFI and NRS for pain at three months and 12 months following surgery. Postoperative complication rate was similar between two groups. Patients with variable-angle LCP had an 18 min shorter mean length of operation (p = 0.040). Patient satisfaction for current activity was not differ between two groups. CONCLUSIONS: The use of variable-angle LCP for treatment of Lisfranc injuries did not show superiority in functional outcomes, pain, complication rates, or patient satisfaction to fixed-angle LCP, but operative time was shorter with variable-angle LCP. LEVEL OF EVIDENCE: Level III, retrospective comparative study.
Asunto(s)
Fracturas de Tobillo/cirugía , Placas Óseas , Fijación Interna de Fracturas/métodos , Articulaciones Tarsianas/cirugía , Adulto , Anciano , Fracturas de Tobillo/diagnóstico , Femenino , Humanos , Masculino , Persona de Mediana Edad , Tempo Operativo , Complicaciones Posoperatorias , Estudios Retrospectivos , Articulaciones Tarsianas/diagnóstico por imagen , Articulaciones Tarsianas/lesiones , Tomografía Computarizada por Rayos X , Adulto JovenRESUMEN
PURPOSE: Reduction and fixation in femoral neck fracture in young patients have a problem of nonunion requiring additional procedure like valgus osteotomy but fixation devices are technically difficult for inexperienced surgeons. We aims to assess the results of valgus osteotomy in femoral neck fracture in our setup. METHODS: We report a series of 20 patients of higher Pauwel's angled fracture of femoral neck fracture presenting late wherein for valgus osteotomy was added to reduction fixation secured with a commonly available 135° dynamic hip screw and plate. RESULTS: Femoral neck fractures united in 16 patients (80%). Excellent to good results (Harris hip score >80) were seen in 70% patients. Angle of correction of preoperative Pauwels has been changed from 68.3 to 34.3. CONCLUSION: 135° dynamic hip screw and plate provides rigid internal fixation after valgus osteotomy and being a more familiar fixation device simplifies the procedure with good results.
Asunto(s)
Placas Óseas , Tornillos Óseos , Fracturas del Cuello Femoral/cirugía , Cuello Femoral/cirugía , Fijación Interna de Fracturas/métodos , Osteotomía/métodos , Adulto , Femenino , Estudios de Seguimiento , Humanos , Masculino , Persona de Mediana Edad , Huesos Pélvicos/cirugíaRESUMEN
Severe symptomatic hallux valgus deformities are usually not treatable with conservative methods in the long-term. Surgical treatment currently aims for mechanical restitution of the first ray with preserved mobility of the first metatarsophalangeal (MTP 1) joint and with low risk of recurrence after surgery. Keeping these aims in mind the surgical methods consist of osteotomy at the proximal part of the first metatarsal bone with a high potential for correction of the deformity. Surgical interventions at the midshaft level of the first metatarsal are only useful if the anatomical shape of the metatarsal shows a wide shaft, which allows a large shift in the osteotomy. In all other cases of severe hallux valgus deformity two different surgical principles are currently used and recommended: 1. proximal or basal osteotomy of the first metatarsal bone in all cases with a preserved MTP 1 and tarsometatarsal (TMT-1) joint without signs of instability. 2. Arthrodesis of the TMT-1 joint in all cases of instability or degenerative changes with an intact MTP 1 joint, the so-called Lapidus arthrodesis. This article gives an overview over the most important and widely used surgical techniques for correction of severe hallux valgus deformities. Emphasis is placed on the different osteosynthesis techniques and the recommended postoperative regimens. The advantages and disadvantages of the most frequently employed osteotomy techniques are discussed based on the current literature and the authors own experience.
Asunto(s)
Artrodesis/métodos , Hallux Valgus/cirugía , Inestabilidad de la Articulación/diagnóstico , Inestabilidad de la Articulación/cirugía , Huesos Metatarsianos/cirugía , Osteotomía/métodos , Procedimientos de Cirugía Plástica/métodos , Medicina Basada en la Evidencia , Hallux Valgus/diagnóstico por imagen , Humanos , Resultado del TratamientoRESUMEN
Biomechanical characteristics of 5 tibial osteotomy plates for the treatment of medial knee joint osteoarthritis were examined. Fourth-generation tibial bone composites underwent a medial open-wedge high tibial osteotomy, using TomoFix™ standard, PEEKPower®, ContourLock®, TomoFix™ small stature plates, and iBalance® implants. Static compression load to failure and load-controlled cyclic fatigue failure tests were performed. All plates had sufficient stability up to 2400 N in the static compression load to failure tests. Screw breakage in the iBalance® group and opposite cortex fractures in all constructs occurred at lower loading conditions. The highest fatigue strength in terms of maximal load and number of cycles performed prior to failure was observed for the ContourLock® group followed by the iBalance® implants, the TomoFix™ standard and small stature plates. PEEKPower® had the lowest fatigue strength. All plates showed sufficient stability under static loading. Compared to the TomoFix™ and the PEEKPower® plates, the ContourLock® plate and iBalance® implant showed a higher mechanical fatigue strength during cyclic fatigue testing, suggesting that both mechanical static and fatigue strength increase with a wider proximal Tshaped plate design together with diverging proximal screws. Mechanical strength of the bone-implant constructs decreases with a narrow Tshaped proximal end design and converging proximal screws (TomoFix™) or a short vertical plate design (PEEKPower®). Published results indicate high fusion rates and good clinical results with the TomoFix™ plate, which is contrary to our findings. A certain amount of interfragmentary motion rather than high mechanical strength and stiffness seem to be important for bone healing which is outside the scope of this paper.
Asunto(s)
Fenómenos Biomecánicos/fisiología , Placas Óseas , Articulación de la Rodilla/cirugía , Osteoartritis de la Rodilla/cirugía , Osteotomía/instrumentación , Tibia/cirugía , Soporte de Peso/fisiología , Tornillos Óseos , Diseño de Equipo , Falla de Equipo , Humanos , Articulación de la Rodilla/fisiopatología , Osteoartritis de la Rodilla/fisiopatologíaRESUMEN
PURPOSE: Tibial fracture is the most common long bone fracture. Distal third tibial fractures are challenging though open reduction and plating can result in anatomical reduction and rigid fixation. This paper aimed to evaluate and compare the results of medial and lateral locking compression plates for distal third tibial fractures. METHODS: This prospective clinical study involved 36 patients with distal tibial fractures admitted in Department of Orthopaedics, Sawai Mansingh Medical College & Affiliated Hospital, Jaipur, India, from June 2011 to May 2012, including 29 closed fractures and 7 open fractures at the mean age of 38.9 years. Thirty-six patients were divided equally into two groups based on treatment method, including medial plating group (18 patients) and lateral plating group (18 patients). They were followed up for at least 5 months after discharge. The functional outcomes were evaluated using Tenny and Wiss clinical assessment criteria. RESULTS: Malunion was found in 3 cases of medial plating group and in 1 case of lateral plating group. In the medial plating group, there were 5 cases of superficial infections, 1 deep infection, 1 nonunion and 3 wound dehiscence. In the lateral plating group, there was 1 case of superficial infections, 1 deep infection and 1 nonunion. In the lateral plating group, 4 patients reported feeling the plates and screws but none of them asked to remove the hardware. In the medial plating group, 9 patients reported symptomatic hardware problems and 7 asked to remove the hardware. The number of cases graded as excellent/good/fair was 1/8/7 in the medial plating group and 3/7/7 in the lateral plating group respectively. In the medial plating group, the final range of motion was 17.2° in ankle dorsiflexion and 30.7° in ankle plantar flexion. In the lateral plating group, the final range of motion was 19° in ankle dorsiflexion and 34.2° in ankle plantar flexion. CONCLUSION: Lateral plating of distal tibia is safe and feasible, which can provide biological fixation and prevent the soft tissue complications associated with medial plating.
Asunto(s)
Placas Óseas , Fijación Interna de Fracturas/métodos , Fracturas de la Tibia/cirugía , Adulto , Femenino , Fijación Interna de Fracturas/efectos adversos , Fijación Interna de Fracturas/instrumentación , Humanos , Masculino , Estudios ProspectivosRESUMEN
BACKGROUND: Previous studies have shown good clinical results in patients with proximal humeral fractures (PHFs) treated with locking intramedullary nails or locking plates. Our study compared the clinical and radiographic outcomes in patients with 2- and 3-part surgical neck fractures. METHODS: In this prospective, randomized controlled trial, 72 patients with 2- or 3-part surgical neck PHFs were randomly assigned to receive fixation with locking intramedullary nails (nail group) or locking plates (plate group). The primary outcome was the 12-month Constant-Murley score. The secondary outcomes included the Disabilities of the Arm, Shoulder and Hand score, the visual analog scale pain score, the shoulder passive range of motion, the neck-shaft angle, and complication rates. RESULTS: There was no significant mean treatment group difference in the Constant-Murley score at 12 months (70.3 points for the nail group vs. 71.5 points for the plate group; P = .750) or at individual follow-up assessments. There were no differences in the 3-, 6- and 12-month Disabilities of the Arm, Shoulder and Hand scores, visual analog scale scores, and range of motion, except for the medial rotation at 6 months. The neck-shaft angle was equivalent between the groups at 12 months. There were significant differences over 12 months in total complication rates (P = .002) and reoperation rates (P = .041). There were no significant differences for the rotator cuff tear rate (P = .672). CONCLUSION: Fixation of PHFs with locking plates or locking intramedullary nails produces similar clinical and radiologic results. Nevertheless, the complication and reoperation rates were higher in the nail group.
Asunto(s)
Clavos Ortopédicos , Placas Óseas , Fijación Intramedular de Fracturas/instrumentación , Fracturas del Hombro/cirugía , Anciano , Clavos Ortopédicos/efectos adversos , Placas Óseas/efectos adversos , Evaluación de la Discapacidad , Femenino , Fijación Intramedular de Fracturas/efectos adversos , Fijación Intramedular de Fracturas/métodos , Humanos , Masculino , Persona de Mediana Edad , Dolor Postoperatorio/etiología , Estudios Prospectivos , Radiografía , Rango del Movimiento Articular , Reoperación , Lesiones del Manguito de los Rotadores/etiología , Fracturas del Hombro/diagnóstico por imagen , Articulación del Hombro/fisiopatologíaRESUMEN
INTRODUCTION: Dynamic Hip Screw fixation is currently considered as a standard treatment for pre-trochanteric fractures; however, due to the long-term hospitalization and some other complications, some researchers have proposed intramedullary nailing as the alternative surgical treatment. The aim of this study was to compare and examine the consequences of the using intramedullary nailing method versus Dynamic Hip Screw. METHODS: In this study 114 patients with unstable Intertrochanteric fracture refer to Rasoul Akram hospital during 2011 to 2013 has been selected. After reduction, fixation surgery with PFN nail (60 patients) and Dynamic Hip Screw (54 patients) has been performed. All patients were screen during surgery and six months after surgery and some parameters like, bleeding, union, as well as complications such as collapse, varus and medialization of the distal fragment were record and patients. RESULTS: About some parameters like cutting length, surgery duration, bleeding there were significant differences between two groups. In six months follow up period 2 patinas from nail and 8 patients from DHS group had non-union. Also from the point of radiologic and clinical parameters, like anterior thigh pain, cut out, medialization of the distal fragment, collapse of the neck, walking recovery and daily activities were significant between two groups. CONCLUSION: Due to the reduced hospital stay in intramedullary nailing method and the necessity of doing repeated surgery and applying intramedullary nailing when the patients are not treated with external fixation, the researchers recommend intramedullary nailing as the first option in treating such patients.