Cone-beam computed tomography of accessory canals of the canalis sinuosus and analysis of the related risk factors.

PURPOSE: Cone-beam computed tomography (CBCT) was used in this study for evaluating the diameter, prevalence, spatial location, and risk factors of the accessory canal (AC) of the canalis sinuosus. METHODS: A comprehensive assessment of the incidence rate, diameter, three-dimensional (3D) spatial location, and direction of travel of AC was performed on 1003 CBCT images. The CBCT data were used to reconstruct a 3D model of the maxilla to determine the alveolar bone volume. The obtained data were further analyzed and processed. RESULTS: AC was present in 50.1% of images. Male patients more frequently had ACs than female patients did (P < 0.01) and was positively correlated with the maxillary alveolar bone volume (P < 0.001, OR 1.532). Age or nasopalatine canal diameter were not significantly associated with the occurrence of AC (P > 0.05). Among the 502 patients with AC, AC was present on the left side, right side, and bilaterally in 189, 98, and 215, respectively. The maximum number of ACs observed per individual was eight. The average AC diameter was 0.89 ± 0.26 mm (minimum, 0.5 mm; maximum, 2.02 mm). CONCLUSIONS: As the prevalence of AC and its trajectory display considerable variation among individuals, surgeons must consider the possibility of the presence of AC when devising surgical plans involving the anterior maxillary region.

Anatomy and function of the canalis sinuosus and its injury prevention and treatment strategies in implant surgery. / çª¦ç®¡çš„è§£å‰–ä¸ŽåŠŸèƒ½åŠå ¶åœ¨ç§æ¤æœ¯ä¸­æŸä¼¤çš„é˜²æ²»ç­–ç•¥.

The canalis sinuosus, a canal containing the anterior superior alveolar nerve bundle, originates from the infraorbital canal and extends along the maxillary sinus and nasal cavity edges to the anterior maxilla. It was once regarded as an anatomical variation. However, with the widespread application of cone beam computed tomography (CBCT), the detection rate of canalis sinuosus in the population has increased. The canalis sinuosus exhibits diverse courses, branching into multiple accessory canals and terminating at the nasal floor or the anterior tooth region, with the majority traversing the palatal side of the central incisor. The anterior superior alveolar nerve bundle within the canalis sinuosus not only innervates and nourishes the maxillary anterior teeth, their corresponding soft tissues, and the maxillary sinus mucosa, but also relates to the nasal septum, lateral nasal wall, and parts of the palatal mucosa. To minimize surgical complications, implantologists need to investigate strategies for preventing and treating canalis sinuosus injuries. Preoperatively, implantologists should use CBCT to identify the canalis sinuosus and virtually design implant placement at a distance of more than 2 mm from the canalis sinuosus. Intraoperatively, implantologists should assess bleeding and patient comfort, complemented by precision surgical techniques such as the use of implant surgical guide plates. Postoperatively, CBCT can be employed to examine the relationship between the implant and the canalis sinuosus, and treatment of canalis sinuosus injuries can be tailored based on the patient's symptoms. This review summarizes the detection of canalis sinuosus in the population, its anatomical characteristics, and its physiological functions in the anterior maxilla, and discusses strategies for effectively avoiding canalis sinuosus injuries during implant surgery, thereby enhancing implantologists' awareness and providing references for clinical decision-making.

Assessment of Canalis Sinuosus located in maxillary anterior region by using cone beam computed tomography: a retrospective study.

BACKGROUND: The aim of the study is to determine the distribution, location, diameter, and distance measurements of Canalis Sinusosus (CS) in relation with age and sex. METHODS: 300 Cone-Beam Computed Tomography (CBCT) images were evaluated. The distance between CS and nasal cavity floor (NCF), buccal cortical bone margin (BCM), alveolar ridge (AR), respectively.The presence of CS smaller than 1 mm, and the diameter of CS larger than 1 mm were determined. Accessory canals (AC) were classified according to their position relative to the teeth. RESULTS: 435 CS with a diameter of at least 1 mm and 142 CS < 1 mm were identified. The most frequently observed location of CS was the region of the right central incisors. The mean diameter of the canals ( CS ≥ 1) was 1.31 ± 0.19 on the right side and 1.29 ± 0.17 on the left side. No gender differences were found in canal diameter were observed (p > 0.05). There was no significant difference between men and women in the distance between CS and the NCF on the right side, and a significant difference was found in the distance of CS-NCF on the left side (p = 0.047). There were no significant differences between age groups in all parameters. CONCLUSION: CBCT is a useful tool for identifying CS. Location and diameter of ACs could not be associated with a specific age group or sex.

Neurological Risks During Implant Placement in the Anterior Maxilla and Mandible: A Literature Review.

The placement of implants in the anterior maxillary and mandibular region requires esthetic proficiency and surgical finesse. It is important to consider the esthetic outcome while avoiding any type of nerve injury for the patient. In this literature review, anatomical structures of the anterior jaw were reviewed from a gross anatomical and radiographic interpretation. A discussion on the frequency of neurosensory complications for patients as a result of nerve damage in this region was evaluated. The purpose of this literature review was to educate the dental surgeon to consider the anterior jaw's neurological structures when performing procedures like implant surgery. The mandibular incisive canal (MIC) presents as an extension of the inferior alveolar canal that runs between the mental foramina. The MIC is a structure that is easily depicted in cone-beam computed tomography (CBCT) imaging and is present in most subjects in gross anatomical studies. The anterior loop of the mental nerve is another structure that is discussed in this paper. Although its structure is accurately depicted in CBCT images, its anatomical variations in patients can make implant treatment planning difficult. The maxilla contains 2 neurovascular structures that were discussed. First, the nasopalatine canal and its relation and impact on implant placement is evaluated. Case reports are reviewed that outline a prophylactic enucleation and bone grafting of the canal prior to implant placement. Second, the canalis sinuosus, which houses the anterior superior alveolar nerve, is of concern during implant placement in the lateral incisor region. Case reports involving nerve damage with follow-up are discussed.

Anatomical variations in the maxillary anterior region: a cone beam computed tomographic study of the canalis sinuosus and its accessory canals.

The objective of this study was to verify the frequency, diameter, and location of the canalis sinuosus (CS) and its accessory canals (ACs) using cone beam computed tomographic (CBCT) images and to correlate these findings with patient sex, age, and skeletal facial pattern. This observational retrospective study assessed the CBCT scans of 398 patients. The laterality, diameter, and location of the terminal portion of the canals were recorded. Linear measurements of the nasal cavity floor, buccal cortical bone, and alveolar ridge crest were also made. The χ2 and Fisher exact tests were used to verify the relationships between patient sex, age, and facial pattern and the presence of CS and ACs. The presence of CS and ACs was verified in 195 (48.99%) and 186 (46.73%) individuals, respectively, and showed no correlations with sex, age, or facial pattern. In 165 cases (84.61%), the CS emerged bilaterally. For ACs, most cases (n = 97; 52.14%) were unilateral. A total of 277 ACs were detected, and 161 (58.12%) of these were located in the palatal or incisive foramen region and 116 (41.88%) in the buccal region. Their terminal portions were located more frequently in the central incisor region (38.26%). The mean CS diameter was significantly larger in men than in women (P < 0.001). The linear measurements of the nasal cavity floor, buccal cortical bone, and alveolar ridge crest did not reveal statistically significant differences between the sexes. This knowledge is helpful for maxillary surgical planning to avoid damage to the neurovascular bundle and subsequent complications.

Assessment of the knowledge of canalis sinuosus amongst dentists and dental students: An online-based cross-sectional study.

INTRODUCTION: Canalis sinuosus (CS) is a neurovascular canal that corresponds to a small branch of the infraorbital canal. This study aimed at assessing the knowledge and detection performance of CS amongst dentists and dental students. MATERIALS AND METHODS: Four-hundred and five dentists and dental students answered a questionnaire with three parts: 1. Socio-demographical; 2. Clinical cases with cone- beam computed tomography (CBCT) sections showing CS and 3. Previous knowledge about CS. The chi-squared test and Spearman's correlation test were used to compare results as appropriate. p-values below .05 were considered statistically significant. RESULTS: Most participants did not identify CS in any CBCT. There was an association between the number of correct answers and dental specialties. Most individuals had not learned about CS previously. There was an association between past knowledge of CS and gender, highest academic degree, working environment, dental specialty and number of correct answers but not with age or experience in Dentistry. CONCLUSION: This study suggests that most dentists are not aware about CS and do not know how to diagnose it. Previous knowledge about CS positively influenced its identification in CBCT.

Prevalence, Radiographic Features and Clinical Relevancy of Accessory Canals of the Canalis Sinuosus in Cypriot Population: A Retrospective Cone-Beam Computed Tomography (CBCT) Study.

Background and Objectives: This retrospective study aims to evaluate the prevalence, radiographic features, and clinical relevancy of the accessory canals (AC) of the canalis sinuosus (CS) in patients referred for implant surgery. Materials and Methods: Cone-beam computed tomography (CBCT) images of the patients were collected and ACs were evaluated. Age, sex, bilateral distribution, localization, diameter, distance to the buccal cortical plate, distance to the crest of the alveolar ridge, terminal ending localization, and the presence of tooth or implant were recorded. Ninety-one patients who were eligible for this study were enrolled. Results: A total of 188 ACs were found in 91 patients with 86 bilateral and 5 unilateral distributions. The mean age of the patients was 45.39. All ACs had a terminal ending at the palatal cortical border. All parameters showed a non-normal distribution; thus, the Mann-Whitney U test was preferred. Bilateral AC distribution (p = 0.761), AC distance to the crest of the alveolar ridge (p = 0.614), AC distance to the buccal cortical plate (p = 0.105), and AC diameter (p = 0.423) showed no significant difference between females and males. According to our study, a CS might be an anatomical structure rather than an anatomical variation, as all patients had at least one AC of the CS. It can be inferred that the detection of ACs will be achievable once clinicians are aware of these structures with continuous regular anatomy reworks and with small voxel-sized CBCT devices. Conclusion: This study was conducted to find the features and prevalence of the CS, and it was found that the CS is an anatomical structure rather than an anatomical variation. This argument is in line with the information on the CS in Gray's Anatomy, 42nd Edition. Impaired healings and complications of the CS can be avoided if clinicians follow the American Academy of Oral and Maxillofacial Radiology guidelines regarding pre-operative implant examination. Otherwise, avertible complications may cause significant impairments in quality of life.

Canalis sinuosus: anatomical variation or structure?

PURPOSE: The main goal of the present study was to verify the presence, spatial location, the end of the canalis sinuosus (CS) trajectory and size of CS using cone beam computed tomography (CBCT) to characterise it as either a structure or an anatomical variation. METHODS: A trained examiner specialist in dental radiology and imagenology selected 200 CBCT images of the maxilla from 107 (53.5%) female and 93 (46.5%) male individuals aged between 18 and 85 years. RESULTS: A total of 133 (66.5%) patients had CS, being 61 (45.86%) unilateral and 72 (54.14%) bilateral. A higher frequency of CS was observed in males (P < 0.05) and no relationship was found between its presence and age. The end of the CS trajectory was more frequent in the regions of central incisor (n = 91; 44.39%), followed by lateral incisor (n = 45; 21.95%) and canine (n = 29; 14.15%). In our sample, the majority of these canals had a diameter of up to 1 mm (n = 198/205; 96.6%). No statistically significant relationship between diameter and the end of the CS trajectory, with location (i.e. bilateral or unilateral) was found. Gender and age had no influence on diameter, spatial location and the end of the CS trajectory (P > 0.05%). CONCLUSION: As CS was frequently found in our sample, it can be considered an anatomical structure, and as such, it is fundamental that the dentist requests a CBCT examination before performing any invasive procedure in the maxillary region to preserve this important structure.

An anatomical variant: evaluation of accessory canals of the canalis sinuosus using cone beam computed tomography.

BACKGROUND: The anatomical variation of the anterior superior alveolar nerve described as canalis sinuosus (CS) is a less known structure of anterior maxilla. Due to the fact that it contains anterior superior alveolar nerve as well as veins and arteries, exact localisation of this structure will allow surgeons to avoid complications. Hence, the aim of this study was to verify the presence, reveal the frequency and characteristics of accessory canals of CS. MATERIALS AND METHODS: This study was based on retrospective evaluation of cone beam computed tomography (CBCT) scans. A total of 1460 CBCT images were analysed and collected data were noted. The following parameters were recorded: age, sex, presence or absence of CS, location in relation to the adjacent teeth and impaction of canine teeth. RESULTS: A total of 6668 accessory canals were found in 1460 CBCT images. Of these, 672 (46.0%) were from female patients, and 788 (54.0%) were from male patients. 1034 (70.8%) of 1460 images had at least one accessory canal of CS. Maxillary intercentral region is the area where accessory canals were seen most frequently (n = 653, 44.72%). CONCLUSIONS: Canalis sinuosus is a bony canal which is incidentally found and less known structure of anterior portion of maxilla. Knowing the accessory canals deriving from this structure will allow surgeons to avoid complications and non-integration after dental implant procedures. Conventional imaging modalities have limited value in detecting this neurovascular structures. Therefore CBCT may have an important role for accurate diagnosis to reveal anatomical variations.

Canalis Sinuosus Mimicking Periapical Pathology on, Radiographic Assessment.

The canalis sinuosus is an anatomical variation whereby the infraorbital canal sometimes generates a small, lateral branch (canal) close to its midpoint, to allow the passage of the anterior superior alveolar neurovascular bundle in the anterior maxilla. This article focuses on an incidental finding of this variant, in a 74-year-old Trinidadian female of Afro-Caribbean descent with an endodontic presenting complaint. The canalis sinuosus shadow on conventional radiography resulted in uncertainty as to the offending tooth until a 3-dimensional scan was undertaken in this region. This report will discuss the implications of the presence of this canal from radiologic, endodontic, and surgical perspectives.

A cone-beam computed tomography study of canalis sinuosus and its accessory canals in a South African population.

OBJECTIVES: Canalis sinuosus (CS) is a clinically relevant structure in the anterior maxilla. The present study aimed to determine the prevalence and distribution of CS and its accessory canals (ACs) in the South African population and describe its anatomical variations. METHODS: In total, 500 cone-beam computed tomography (CBCT) scans of the anterior maxilla were assessed for prevalence, sidedness, diameter, and distribution of CS. The frequency, number, diameter, configuration, and point of termination of ACs were also recorded. Statistical analysis was performed using analysis of variance, Kruskal-Wallis, chi-squared, and Fisher Exact tests with P < 0.05. RESULTS: CS was present in most cases (99.6%), and commonly occurred bilaterally (98.8%). The mean diameter of CS was 1.08 mm (range: 0.50 mm-2.39 mm). Sex, population group, and age had no significant effect on the prevalence or sidedness of CS. Additionally, 535 ACs were observed in 58.8% of the sample, with 42.9% of ACs found bilaterally and 57.1% unilaterally. The mean diameter of the ACs was 0.86 mm on the left and 0.87 mm on the right (range; 0.50 mm-1.52 mm). The majority of ACs maintained a straight vertical configuration (72.3%). ACs most commonly terminated in the anterior palatal region of the maxilla (57.2%). No significant differences were found in any groups mentioned (P > 0.05). CONCLUSIONS: A high prevalence of CS as well as ACs were observed in the sample population. Due to their clinical significance, surgical planning with the aid of high quality CBCT scans of the anterior maxilla is advisable.

Assessment of canalis sinuosus, rare anatomical structure using cone-beam computed tomography: A prospective study.

Objectives: This prospective study was performed with cone-beam computed tomography (CBCT) images for evaluating canalis sinuosus (CS), determine its location and diameter in relation to gender, age, and distances from important structures, including floor of nasal cavity, incisive foramen, edge of buccal cortical bone, and palatal cortical bone. Material and Methods: The scans of 650 patients in total were included in this prospective analysis. Gender, age, the position of the CS, its presence or absence, diameter, and its location in reference to the adjacent teeth were the factors that were noted. Results: The study had 301 female participants and 349 male participants, with a mean age of 42.19. Compared to females, males had a statistically higher frequency of CS. Higher age groups showed a higher presence of CS in comparison to the other age groups. The mean distances of these parameters on the left and right side did not differ significantly. Nonetheless, the distance on both sides between CS and nasal cavity floor for males and females, as well as the diameter and border of buccal-palatal cortical bone on the right side, were statistically significant different. On the left side, both genders demonstrated significance in buccal cortical margin and nasal cavity floor. IIn addition, in females, the diameter of the CS on the right and left sides differed on average. The associations between age and number of CS, CS diameter, and number of CS versus sex were all extremely weak. Overall, the study findings showed that CS is a typical anatomical feature in anterior maxillary region, irrespective of age, or gender. Conclusion: The bony canal, CS is an obscure feature located in the frontal region of the maxilla. Surgeons can avoid complications by being aware of the auxiliary canals derived from this structure. With the use of CBCT, it is now feasible to examine the course of CS as it passes through the maxillary sinus's anterolateral wall with better radiological accuracy has already been documented.

Evaluation of the morphology of accessory canals of the canalis sinuosus via cone-beam computed tomography.

PURPOSE: This study aims to assess the presence of accessory canal (AC) associated with canalis sinuous (CS), describing their frequency, lateralization, location, direction, and measurements in cone beam computed tomography (CBCT). METHODS: Axial, coronal, sagittal, and cross-sectional reconstructions were analyzed in 248 CBCT images and the presence of CS, the presence of AC associated with CS, the lateralization, localization, and direction course of AC associated with CS was evaluated. CS diameter, AC diameter, the distance between the nasal cavity floor and CS (M1), CS and the buccal cortical bone (M2), and CS and the alveolar ridge (M3) were measured. RESULTS: CS was detected in all CBCT scans as bilaterally. The prevalence of AC associated with CS was 35.5%. There was a significant difference between dental status anthe d presence of AC associated with CS. There was a significant difference between gender, dental status, and lateralization of AC associated with CS. While M1 was greater in male patients than females, M3 was greater in female patients. M2 and M3 were greater in younger patients. CONCLUSION: Clinicians performing surgical procedures should keep in mind that anatomical variations of the vascular nerve bundle may be seen. M1, M2, and M3 measurements can be affected by gender, age, and dental status.

Anatomical variations and accessory structures in the maxilla in relation to implantological procedures: an observational retrospective study of 212 cases using cone-bean computed tomography.

PURPOSE: This study used cone-beam computed tomography (CBCT) to analyze the prevalence of several maxillary anatomical/accessory structures, as well as variations within each type, assessing how accurate diagnosis can minimize the risk of intraoperative complications during implantological procedures in the oral cavity. METHODS: 212 CBCT scans of the maxilla were analyzed, captured over a period of 18 months for surgical planning purposes. The prevalence of posterior superior alveolar arteries (PSAA), maxillary sinus septa (MSS), and branches of the canalis sinuosus (CS) were evaluated, as were the diameter and location of each anatomical structure in horizontal and vertical planes. P < 0.05 was considered statistically significant. RESULTS: PSAAs were observed in 99.1% of cases, the intrasinus type being the most frequent; MSS were noted in 15.6% of the sample, mainly in the posterior region with sagittal orientation; CS branches were observed in 50% of patients, mainly in relation to the incisors and significantly more prevalent among males. CONCLUSIONS: The use of CBCT significantly increases the possibility of clearly identifying these anatomical structures. The differences found between patients highlight the importance of carrying out an exhaustive radiological study of the individual to prevent complications, such as Schneiderian membrane perforation, neurovascular damage or bleeding during surgery.

[Misinterpretation of a periapical radiograph: the canalis sinuosus mimicking a root resorption]. / Fehlinterpretation im Röntgenbild. Der Canalis sinuosus als radiologisch-anatomische Vortäuschung einer Wurzelresorption.

There is widespread knowledge that the mental foramen or incisive foramen can be projected onto tooth roots in conventional radiographs, thus simulating apical lesions. In contrast, the anatomical structure of the canalis sinuosus and its branching canals in the anterior maxilla are less known. Sometimes these bone canals mimic a dentino- or osteolysis on conventional radiographs. If these bone canals project onto the roots of the anterior maxillary teeth, there is a risk of misinterpretation as root resorption or apical periodontitis. This case report presents an incidental radiological finding. Due to a radiolucency within the root of tooth 11, root resorption was suspected. Using cone beam-computed tomography, the origin of this radiolucency was clearly identified as an anatomical structure, and the suspected diagnosis was ruled out. This case highlights the importance of the knowledge of anatomical structures to avoid misinterpretations and unnecessary treatments.

Evaluation of canalis sinuosus in individuals with cleft lip and palate: a cross-sectional study using cone beam computed tomography.

OBJECTIVE: To evaluate the canalis sinuosus (CS) in individuals with cleft lip and palate (CLP) and compare the findings with individual's NON-CLP using cone beam computed tomography (CBCT). MATERIALS AND METHODS: The sample consisted of 100 CBCT exams of NON-CLP individuals (G1 group) and 200 of CLP individuals (G2 group). Recorded parameters included presence of CS, accessory canal to the CS, diameter greater than 1 mm, gender, age, localization in relation to teeth, and adjacent structures. Statistical tests were used to compare the findings between groups. A p value of < 0.05 was considered as significant. RESULTS: A higher prevalence of accessory canal was found in the G2 (p < 0.001). The anteroposterior diameter of the right side CS in G2 was higher than G1 (p < 0.05), with average of 1.4 mm ± 0.4 mm. The accessory canal had a larger diameter in G2 than G1 (p < 0.05) with average of 1.3 mm ± 0.3 mm. Between UCLP, the CS presented the largest diameter for the side NON-CLP (p < 0.001). The accessory canal was more distant from the cortical buccal in G2 (P < 0.05). The dental region incidence of the accessory canal was molars and premolars for G2 and canines and incisors in G1. CONCLUSION: Individuals with CLP show higher prevalence of accessory canal to the CS with larger diameters than NON-CLP. It is necessary that the professional make adequate planning prior to surgeries, using the CBCT, in order to avoid neurovascular lesions, since these individuals undergo several surgeries in the CS region.

New accessory palatine canals and foramina in cone-beam computed tomography.

BACKGROUND: Palatal surgeries are associated with many complications. Accessory foramina may be a cause of concern. The present study was conducted to assess the presence and to evaluate the anatomical characteristics of accessory palatine foramina (APF) and related bony canals in cone beam computed tomography (CBCT) scans. MATERIALS AND METHODS: The incidence, location, and types of foramina on the palate were evaluated in 170 CBCT scans. Readings from coronal, sagittal, and axial planes were recorded using a computer programme and evaluated. RESULTS: Other than nasopalatine, greater and lesser palatine foramina, 278 foramina were seen in the palate in different locations. New APF were found posteriorly in 14.71% of the studied scans with wide anatomical variations. Unusual foraminal canals were seen crossing the antral floor laterally. The anterior APF were seen in 73.53% of scans while bilateral APF were found in 43.53% of cases. CONCLUSIONS: Accessory palatine foramina and related canals are frequently seen in CBCT with many anatomical variations. New unusual connecting canals are found passing through the antral floor from palatine foramina to the lateral antral wall. These anatomical structures should be considered in preoperative planning for local analgesia and surgical interventions in the palate.

Three-dimensional anatomy of the transantral intraseptal infraorbital canal with the use of cone-beam computed tomography.

The transantral or ectopic infraorbital canal (IOC) courses diagonally through the maxillary sinus (MS), thereby being exposed to risk during a number of surgical procedures. A few prior reports have presented evidence of a septa-embedded IOC, albeit only on single-plane slices. We identified this extremely rare variation of the IOC during a retrospective study of the cone-beam computed tomography files of 2 patients. In the first case, which involved a 34-year-old female patient, the canals and septa within the MS were bilaterally asymmetrical. On the right side, the sinus roof was attached to a short transverse septum that was traversed by the IOC, while the left sinus featured an oblique large septum that divided it into antero-superior and posterior chambers. The left IOC was embedded within the septum rather than within the orbital floor above the septum. In the second case, which concerned a 36-year-old male patient, the left MS featured an almost completely oblique/vertical septum that divided it into anterior and posterior chambers and also embedded the respective IOC, which was thus absent from the orbital floor. In both cases, infraorbital recesses in the anterior chambers of the MS were found that, if not documented on three-dimensional (3D) renderisations, could have been misidentified as infraorbital (Haller) cells. To the best of our knowledge, this is the first report to document the 3D anatomy of an extremely rare variant, namely a septum-embedded transantral IOC. Such a variant, if not adequately documented preoperatively, could divert the transmaxillary corridors down false paths or else expose the IOC to damage during surgical procedures involving access to tumours.

Visualization features of canalis sinuosus with cone beam computed tomography.

INTRODUCTION: One of the key stages of evaluating an edentulous ridge prior to dental implant placement is the analysis of neighboring anatomical structures such as canalis sinuosus (CS) with cone-beam computed tomography (CBCT). CBCT visualization has its own features, such as the change of slice thickness. The aim of the study was to analyze CS prevalence in relation to the slice thickness and CS diameter according to CBCT scans. MATERIALS AND METHODS: In total, 100 CBCT scans of 39 males and 61 females in the age span of 46 to 81 years were retrospectively studied. Terminal alveolar part of CS was analyzed in Ez3D2009 (Vatech) software on panoramic and cross-sectional views with 0.5 mm, 1 mm, 3 mm, and 10 mm slice thicknesses. The prevalence was documented with regard to the diameter and slice thickness and was statistically compared in age and gender groups. RESULTS: This CBCT study demonstrated 55.5% CS prevalence. There was no statistically significant difference in presence between age and gender groups regarding diameter as well as within different slice thickness. The study also showed the importance of the slice thickness choice for CS visualization: the best visualization was reached with 0.5 mm and 1 mm slice thicknesses. Visualization with 0.5 mm and 1 mm slice thicknesses was absolutely the same (55.5%). General CS prevalence with a 10 mm slice thickness (16.5%) was significantly lower (P < 0.05) than the prevalence with a 3 mm slice thickness (20.5%). The correlation between the slice thickness and a diameter more than 1.5 mm in size was not found. CONCLUSION: CBCT analysis showed that the highest CS prevalence was detected with the use of 0.5/1 mm slice thickness. As well, the higher CS diameter, the better is its visualization.

Estudio Anatómico y Prevalencia del Canalis sinuosus Evaluado Mediante Cone Beam CT en Pacientes Chilenos / Anatomical Study and Prevalence of Canalis sinuosus Evaluated by Cone Beam CT in Chilean Patients

Canalis sinuosus, canal intraóseo localizado en región maxilar anterior, contiene elementos vasculonerviosos alveolares anterosuperiores. Diversas intervenciones en región maxilar anterior como colocación de implantes, exodoncias, instalación de microtornillos ortodóncicos, procedimientos quirúrgicos, entre otros, pueden comprometer al Canalis sinuosus y/o sus canales accesorios dañando los elementos contenidos en su interior causando complicaciones como hemorragias, parestesia, disestesia, etc. Dado el gran desconocimiento de su existencia, el Canalis sinuosus frecuentemente es confundido con lesiones patológicas y/o endodónticas. Clásicamente la literatura lo describe como una variación anatómica variación anatómica, sin embargo, presenta elevadas prevalencias (51,7 %-100 %), siendo cuestionada esta aseveración. Determinar prevalencia y característica s anatómicas del Canalis sinuosus mediante Cone Beam CT en pacientes chilenos del centro radiológico IMAPROX® entre 2017- 2021. Análisis retrospectivo de 220 CBCT maxilares anonimizados, considerando variables sexo, presencia del Canalis sinuosus, Canalis sinuosus uni/bilateral, diámetro mayor del Canalis sinuosus, presencia/número de accesorios. Análisis estadístico uni y bivariado. 100 % de prevalencia del Canalis sinuosus en ambos sexos, presencia bilateral 100 %. Diámetro mayor promedio del Canalis sinuosus: 2,58 mm. El 76,8 % presentó accesorios, siendo más prevalente la presencia de 2 CA (34,1 %). Una estructura anatómica normal habitual debe presentar sobre 50 % de prevalencia para ser considerada como tal, pero no hay consensos en criterios empleados para definir variación anatómica o estructura anatómica normal habitual. Literatura describe al Canalis sinuosus como variación anatómica, pero estudios actuales muestran elevadas prevalencias: Rusia 67 %, Brasil 88 %, Turquía, Colombia y Chile 100 %. Este estudio encontró 100 % de prevalencia, sugiriendo que Canalis sinuosus es una estructura anatómica normal habitual. Sin embargo, Canalis sinuosus es poco conocido asociándose a numerosas complicaciones por procedimientos odontológicos y/o quirúrgicos en RMA pudiendo generar hemorragias, parestesia/disestesia, dolor agudo, etc. Elevadas prevalencias reportadas sugieren que Canalis sinuosus es una estructura anatómica normal habitual y no una variación anatómica, pero se requieren más estudios y consensos para aseverarlo. Es de relevancia clínica conocer la existencia y localización del Canalis sinuosus para evitar complicaciones.

Canalis sinuosus, an intraosseous canal located in the anterior maxillary region, contains anterosuperior alveolar vascular-nervous elements. Various interventions in anterior maxillary region such as implant placement, extractions, installation of orthodontic microscrews, surgical procedures, among others, can compromise the Canalis sinuosus and/or its accessory canals, damaging the elements contained inside, causing complications such as bleeding, paresthesia, dysesthesia, etc. Given the great ignorance of its existence, Canalis sinuosus is frequently confused with pathological and/or endodontic lesions. Classically, the literature describes it as an anatomical variation, however, it presents high prevalence (51.7 %-100 %), this assertion being questioned. Objective: to determine the prevalence and anatomical characteristics of Canalis sinuosus using Cone Beam CT in Chilean patients from the IMAPROX® radiological center between 2017-2021. Retrospective analysis of 220 anonymous maxillary CBCT, considering variables sex, presence of Canalis sinuosus, uni/bilateral Canalis sinuosus, largest diameter of Canalis sinuosus, presence/number of accessory canals. Univariate and bivariate statistical analysis. The 100 % prevalence of Canalis sinuosus in both sexes, 100 % bilateral presence. Canalis sinuosus average major diameter: 2.58 mm, 76.8 % presented accessory canals, with the presence of 2 accessory canals being more prevalent (34.1 %). A habitual normal anatomical structure must have a prevalence of over 50 % to be considered as such, but there is no consensus on the criteria used to define anatomical variation or normal anatomical structure. Literature describes Canalis sinuosus as anatomical variation, but current studies show high prevalence: Russia 67 %, Brazil 88 %, Turkey, Colombia and Chile 100 %. This study found 100 % prevalence, suggesting that Canalis sinuosus is an normal anatomical structure. However, Canalis sinuosus is little known as it is associated with numerous complications from dental and/or surgical procedures in anterior maxillary region, which can cause bleeding, paresthesia/ dysesthesia, acute pain, etc. High reported prevalences suggest that Canalis sinuosus is an normal anatomical structure and not an anatomical variation, but more studies and consensus are required to confirm this. It is clinically relevant to know the existence and location of Canalis sinuosus to avoid complications.