RESUMEN
Berries are a rich source of natural antioxidant compounds, which are essential to profile, as they add to their nutritional value. However, the complexity of the matrix and the structural diversity of these compounds pose challenges in extraction and chromatographic separation. By relying on multivariate curve resolution alternating least squares (MCR-ALS) ability to extract components from complex spectral mixtures, our study evaluates the contributions of various extraction techniques to interference, extractability, and quantifying different groups of overlapping compounds using liquid chromatography diode array detection (LC-DAD) data. Additionally, the combination of these methods extends its applicability to evaluate polyphenol degradation in stored berry smoothies, where evolving factor analysis (EFA) is also used to elucidate degradation products. Results indicate that among the extraction techniques, ultrasonication-assisted extraction employing 1% formic acid in methanol demonstrated superior extractability and selectivity for the different phenolic compound groups, compared with both pressurized liquid extraction and centrifugation of the fresh berry smoothie. Employing MCR-ALS on the LC-DAD data enabled reliable estimation of total amounts of compound classes with high spectral overlaps. Degradation studies revealed significant temperature-dependent effects on anthocyanins, with at least 50% degradation after 7 months of storage at room temperature, while refrigeration and freezing maintained fair stability for at least 12 months. The EFA model estimated phenolic derivatives as the main possible degradation products. These findings enhance the reliability of quantifying polyphenolic compounds and understanding their stability during the storage of berry products.
RESUMEN
This study investigated degradation kinetics of five selected organic micropollutants (OMPs) present in poultry litter (namely: sulfadiazine, tetracycline, and doxycycline hyclate (antibiotics); estrone and 17-ß-estradiol (hormones)) during hydrothermal carbonization (HTC) treatment as the temperature stepwise increased to 250 °C. All five pure OMPs were completely degraded before 250 °C was reached during the HTC process. Nevertheless, presence of poultry litter slowed down the degradation of OMPs. Through elemental mass balance calculation, it is noted that after 15 min (temperature less than 137 °C), 69-82% of organic carbon and 50-66% of organic nitrogen initially consisting part of the target antibiotics were fully mineralized. Both HTC filtrates and hydrochars obtained from poultry litter inhibited Escherichia coli and Bacillus subtilis growth. A combination of high salinity, high nutrients, dissolved organic carbon, and other ions in the filtrate as well as the adsorption of OMPs on hydrochars were probably the reason for the high toxicity.
Asunto(s)
Antibacterianos , Aves de Corral , Animales , Carbono , Temperatura , EstradiolRESUMEN
Pesticide residues and microplastics (MPs) in agricultural soils are two major concerns for soil health and food safety. The degradation of chlorpyrifos (CPF), an organophosphorus pesticide, releases phosphates. This process may be affected by the presence of MPs in the soil. The combination of CPF and MPs presence in the soil may thus produce interaction effects that alter the soil phosphorus (P) balance. This study explores the degradation pathways of CPF (6â¯mgâ¯kg-1, 12â¯mgâ¯kg-1 of CPF addition) in soils with different levels of polylactic acid MPs (PLA-MPs) (0.0 %, 0.1 %, 0.5 %, 1.0 % w/w), and analyzes soil P fractions and phosphatase enzyme activities to investigate soil P bioavailability under different treatments. Results show that the degradation of CPF fits to a first-order decay model, with half-lives (DT50) ranging from 11.0 to 14.8 d depending on PLA-MPs treatment. The concentration of its metabolite 3, 5, 6-trichloropyridine 2-phenol (TCP) reached a peak of 0.93-1.67â¯mgâ¯kg-1 within 7-14â¯days. Similarly, the degradation of CPF led to a significant transient increase in P bioavailability within 3-7â¯days (p < 0.05), with a peak range of 22.55-26.01â¯mgâ¯kg-1 for Olsen-P content and a peak range of 4.63-6.76 % for the proportions of available P fractions (H2O-P+NaHCO3-P+NaOH-P), before returning to prior levels (Olsen-P: 11.28-19.52â¯mgâ¯kg-1; available soil P fractions: 4.15-5.61 %). CPF degradation (6â¯mgâ¯kg-1) was significantly inhibited in soil with 1.0 % PLA-MPs addition. The effects of MPs and CPF on soil P fractions occur at different time frames, implying that their modes of action and interactions with soil microbes differ.
Asunto(s)
Cloropirifos , Microplásticos , Fósforo , Contaminantes del Suelo , Suelo , Contaminantes del Suelo/análisis , Contaminantes del Suelo/metabolismo , Fósforo/análisis , Suelo/química , Disponibilidad Biológica , Biodegradación Ambiental , Poliésteres/química , Poliésteres/metabolismo , Insecticidas/análisisRESUMEN
Macrophytes are crucial in maintaining the equilibrium of aquatic ecosystems. However, the pattern of macrophyte-derived caffeic acid (CA) release under heavy metal stress is yet to be fully understood. More importantly, due to its functional groups, CA may be a precursor to the formation of disinfection by-products, posing threats to water ecology and even safety of human drinking water. This study analyzed the responses of CA released by Vallisneria natans (V. natans) and Pistia stratiotes (P. Stratiotes) when exposed to Cu2+ and Mn2+ stress. Additionally, the CA levels in two constructed wetland ponds were detected and the degradation kinetics of CA during chlorination were investigated. Results indicated that CA occurred in two constructed wetland ponds with the concentrations of 44.727⯵g/L (planted with V. natans) and 61.607⯵g/L (planted with P. Stratiotes). Notably, heavy metal stress could significantly affect CA release from V. natans and P. Stratiotes. In general, under Cu2+ stress, V. natans secreted far more CA than under Mn2+ stress, the level could reach up to 435.303⯵g/L. However, compared to V. natans, P. Stratiotes was less affected by Cu2+ and Mn2+ stress, releasing a maximum CA content of 55.582⯵g/L under 5â¯mg/L Mn2+ stress. Aquatic macrophytes secreted more CA in response to heavy metal stresses and protected macrophytes from harmful heavy metals. CA degradation followed the pseudo first-order kinetics model, and the chlorination of CA conformed to a second-order reaction. The reaction rate significantly accelerated as NaClO, pH, temperature and Br- concentration increased. A new pathway for CA degradation and a new DBP 2, 2, 3, 3-tetrachloropropanal were observed. These findings pointed at a new direction into the adverse effect of CA, potentially paving the way for new strategies to solve drinking water safety problems.
Asunto(s)
Araceae , Ácidos Cafeicos , Agua Potable , Metales Pesados , Contaminantes Químicos del Agua , Humanos , Ecosistema , Contaminantes Químicos del Agua/análisis , Halogenación , Araceae/metabolismo , Metales Pesados/análisisRESUMEN
Solar Fenton is an important and extensively used advanced oxidation process (AOP) to degrade pharmaceutical pollutants. The objective of this study was to evaluate the performance of simultaneous degradation of the mixed pollutants (amoxicillin, acetaminophen, and ciprofloxacin) for an aqueous solution using the solar Fenton process. Operating parameters such as pH, iron doses, H2O2 doses, pollutant concentrations, and time were studied. From the experimental results, the ideal conditions were obtained for the removal of mixed pollutants such as pH 3, Fe2+ 0.04 mM, H2O2 4 mM, the concentration of the mixed pollutants 5 mg/L, solar radiation 400 W/m2, and time 10 min, respectively. The pseudo-first-order kinetics were utilized to investigate the degradation efficacy of the mixed pollutants. The result of the study indicates that the degradation efficiency was > 99% for the mixed pollutants. A maximum of 63% mineralization was observed, and hydroxyl radical scavenger effects were studied. The best optimal conditions were applied to assess the spiked wastewater (municipal wastewater (MWW) and hospital wastewater (HWW)). The highest elimination rates for AMX, ACET, and CIP were observed as 65%, 89%, and 85% for MWW and 76%, 92%, and 80% for HWW, respectively. The degraded by-products were detected by LC-ESI-MS in the water matrix (aqueous solution and spiked wastewater), and ECOSAR analysis was performed for the transformed products. The study concluded that the solar Fenton technique is promising and effective for the removal of mixed pollutants from the water matrix.
Asunto(s)
Peróxido de Hidrógeno , Hierro , Luz Solar , Eliminación de Residuos Líquidos , Contaminantes Químicos del Agua , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/química , Peróxido de Hidrógeno/química , Cinética , Hierro/química , Eliminación de Residuos Líquidos/métodos , Aguas Residuales/química , Oxidación-Reducción , Ciprofloxacina/química , Ciprofloxacina/análisis , Acetaminofén/química , Acetaminofén/análisis , Amoxicilina/química , Amoxicilina/análisisRESUMEN
Dichloromethane (DCM) has been listed as a toxic and harmful water pollutant, and its removal needs attention. Microbial electrolysis cells (MECs) are viewed as a promising alternative for pollutant removal, which can be strengthened from two aspects: microbial inoculation and acclimation. In this study, the MEC for DCM degradation was inoculated with the active sludge enhanced by Methylobacterium rhodesianum H13 (strain H13) and then acclimated in the form of a microbial fuel cell (MFC). Both the introduction of strain H13 and the initiation in MFC form significantly promoted DCM degradation. The degradation kinetics were fitted by the Haldane model, with Vmax, Kh, Ki and vmax values of 103.2 mg/L/hr, 97.8 mg/L, 268.3 mg/L and 44.7 mg/L/hr/cm2, respectively. The cyclic voltammogram implies that DCM redox reactions became easier with the setup of MEC, and the electrochemical impedance spectrogram shows that the acclimated and enriched microbes reduced the charge transfer resistance from the electrode to the electrolyte. In the biofilm, the dominant genera shifted from Geobacter to Hyphomicrobium in acclimation stages. Moreover, Methylobacterium played an increasingly important role. DCM metabolism mainly occurred through the hydrolytic glutathione S-transferase pathway, given that the gene dcmA was identified rather than the dhlA and P450/MO. The exogenous electrons facilitated the reduction of GSSG, directly or indirectly accelerating the GSH-catalyzed dehalogenation. This study provides support for the construction of an efficient and stable MEC for DCM removal in water environment.
Asunto(s)
Fuentes de Energía Bioeléctrica , Microbiota , Cloruro de Metileno/metabolismo , Electrólisis , Cinética , ElectrodosRESUMEN
This study investigated degradation behaviors of a nonsteroidal anti-inflammatory drug Nabumetone (NMT) and its major metabolite 6-methoxy-2-naphthylacetic acid (MNA) in the coupling process of ultraviolet and monochloramine (UV/NH2Cl). The second-order rate constants of the contaminants reacting with reactive radicals (HOâ¢, Clâ¢, Cl2â¢â», and CO3â¢â») were determined by laser flash photolysis experiments. HO⢠and Cl⢠contributed predominantly with 52.3% and 21.7% for NMT degradation and 60.8% and 22.3% for MNA degradation. The presence of chlorides retarded the degradation of NMT, while promoted the destruction of MNA, which was ascribed to the photosensitization effects of MNA under UV irradiation. Density functional theory (DFT) calculations revealed that radical adduct formation (RAF) was dominant pathway for both HO⢠and Cl⢠reacting with the contaminants, and hydrogen atom transfer (HAT) preferred to occur on side chains of NMT and MNA. NMT reacted with NO2⢠through single electron transfer (SET) with the second-order rate constant calculated to be 5.35 × 107 (mol/L)-1 sec-1, and the contribution of NO2⢠was predicted to be 13.0% of the total rate constant of NMT in pure water, which indicated that NO2⢠played a non-negligible role in the degradation of NMT. The acute toxicity and developmental toxicity of NMT were enhanced after UV/NH2Cl treatment, while those of MNA were alleviated. The transformation products of both NMT and MNA exhibited higher mutagenicity than their parent compounds. This study provides a deep understanding of the mechanism of radical degradation of NMT and MNA in the treatment of UV/NH2Cl.
Asunto(s)
Cloraminas , Contaminantes Químicos del Agua , Purificación del Agua , Nabumetona , Dióxido de Nitrógeno , Contaminantes Químicos del Agua/análisis , Cinética , Rayos Ultravioleta , Oxidación-Reducción , Modelos Teóricos , CloroRESUMEN
The degradation and transformation of iodinated alkanes are crucial in the iodine chemical cycle in the marine boundary layer. In this study, MP2 and CCSD(T) methods were adopted to study the atmospheric transformation mechanism and degradation kinetic properties of CH3 I and CH3 CH2 I mediated by â OH radical. The results show that there are three reaction mechanisms including H-abstraction, I-substitution and I-abstraction. The H-abstraction channel producing â CH2 I and CH3 C â HI radicals are the main degradation pathways of CH3 I and CH3 CH2 I, respectively. By means of the variational transition state theory and small curvature tunnel correction method, the rate constants and branching ratios of each reaction are calculated in the temperature range of 200-600â K. The results show that the tunneling effect contributes more to the reaction at low temperatures. Theoretical reaction rate constants of CH3 I and CH3 CH2 I with â OH are calculated to be 1.42×10-13 and 4.44×10-13 â cm3 molecule-1 s-1 at T=298â K, respectively, which are in good agreement with the experimental values. The atmospheric lifetimes of CH3 I and CH3 CH2 I are evaluated to be 81.51 and 26.07â day, respectively. The subsequent evolution mechanism of â CH2 I and CH3 C â HI in the presence of O2 , NO and HO2 indicates that HCHO, CH3 CHO, and I-atom are the main transformation end-products. This study provides a theoretical basis for insight into the diurnal conversion and environmental implications of iodinated alkanes.
RESUMEN
In this study, three cold-tolerant phenol-degrading strains, Pseudomonas veronii Ju-A1 (Ju-A1), Leifsonia naganoensis Ju-A4 (Ju-A4), and Rhodococcus qingshengii Ju-A6 (Ju-A6), were isolated. All three strains can produce cis, cis-muconic acid by ortho-cleavage of catechol at 12 â. Response surface methodology (RSM) was used to optimize the proportional composition of low-temperature phenol-degrading microbiota. Degradation of phenol below 160 mg L-1 by low-temperature phenol-degrading microbiota followed first-order degradation kinetics. When the phenol concentration was greater than 200 mg L-1, the overall degradation trend was in accordance with the modified Gompertz model. The experiments showed that the microbial agent (three strains of low-temperature phenol-degrading bacteria were fermented separately and constructed in the optimal ratio) could completely degrade 200 mg L-1 phenol within 36 h. The above construction method is more advantageous in bio-enhanced treatment of actual wastewater. Through the construction of microbial agents to enhance the degradation effect of phenol, it provides a feasible scheme for the biodegradation of phenol wastewater at low temperature and shows good application potential.
Asunto(s)
Fenol , Aguas Residuales , Fenol/metabolismo , Temperatura , Fenoles/metabolismo , Frío , Biodegradación AmbientalRESUMEN
MoTe2garnered much attention among 2D materials due to stable polymorphs with distinctive structural and electronic properties. Among the polymorphs, 1T'-MoTe2in bulk form is type-II Weyl semimetal while, in monolayer form is a quantum spin Hall insulator. Thus, it is suitable for a wide variety of applications. Nevertheless, 1T'-MoTe2degrades within a few hours when exposed to the atmosphere and causes hindrances in device fabrication. Here the degradation kinetics of CVD-synthesized 1T'-MoTe2was investigated using Raman spectroscopy, XPS, and microscopic characterizations. The degradation rate of as-grown 1T'-MoTe2obtained was 9.2 × 10-3min-1. Further, we prevented the degradation of 1T'-MoTe2by introducing a thin coating of S that encapsulates the flakes. 1T'-MoTe2flakes showed stability for several days when covered using sulphur, indicating 25 times enhanced structural stability.
Asunto(s)
Electrónica , Azufre , Cinética , Neutrófilos , Oxidación-ReducciónRESUMEN
The residual imidacloprid, a widely used insecticide is causing serious environmental concerns. Knowledge of its biodegradation will help in assessing its residual mass in soil. In view of this, a soil microcosm-based study was performed to test the biodegradation potential of Agrobacterium sp. InxBP2. It achieved â¼88% degradation in 20 days and followed the pseudo-first-order kinetics (k = 0.0511 day-1 and t1/2=7 days). Whole genome sequencing of Agrobacterium sp. InxBP2 revealed a genome size of 5.44 Mbp with 5179 genes. Imidacloprid degrading genes at loci K7A42_07110 (ABC transporter substrate-binding protein), K7A42_07270 (amidohydrolase family protein), K7A42_07385 (ABC transporter ATP-binding protein), K7A42_16,845 (nitronate monooxygenase family protein), and K7A42_20,660 (FAD-dependent monooxygenase) having sequence and functional similarity with known counterparts were identified. Molecular docking of proteins encoded by identified genes with their respective degradation pathway intermediates exhibited significant binding energies (-6.56 to -4.14 kcal/mol). Molecular dynamic simulation discovered consistent interactions and binding depicting high stability of docked complexes. Proteome analysis revealed differential protein expression in imidacloprid treated versus untreated samples which corroborated with the in-silico findings. Further, the detection of metabolites proved the bacterial degradation of imidacloprid. Thus, results provided a mechanistic link between imidacloprid and associated degradative genes/enzymes of Agrobacterium sp. InxBP2. These findings will be of immense significance in carrying out the lifecycle analysis and formulating strategies for the bioremediation of soils contaminated with insecticides like imidacloprid.
Asunto(s)
Insecticidas , Contaminantes del Suelo , Biodegradación Ambiental , Simulación del Acoplamiento Molecular , Multiómica , Neonicotinoides/análisis , Insecticidas/análisis , Nitrocompuestos/análisis , Nitrocompuestos/química , Nitrocompuestos/metabolismo , Bacterias/metabolismo , Contaminantes del Suelo/análisis , SueloRESUMEN
Methylisothiazolinone (MIT) is widely used in daily chemicals, fungicides, and other fields and its toxicity has posed a threat to water system and human health. In this study, ultraviolet (UV)/trichloroisocyanuric acid (TCCA), which belongs to advanced oxidation processes (AOP), was adopted to degrade MIT. Total chlorine attenuation detection proved that TCCA has medium UV absorption and a strong quantum yield (0.49 mol E-1). At a pH of 7.0, 93.5% of MIT had been decontaminated after 60 min in UV/TCCA system (kobs = 4.4 × 10-2 min-1, R2 = 0.978), which was much higher than that in the UV alone system and TCCA alone system, at 65% (1.7 × 10-2 min-1, R2 = 0.995) and 10% (1.8 × 10-3 s-1, R2 = 0.915), respectively. This system also behaved well in degrading other five kinds of contaminants. Tert-butanol (TBA) and carbonate (CO32-) were separately used in quenching experiments, and the degradation efficiency of MIT decreased by 39.5% and 46.5% respectively, which confirmed that HO⢠and reactive chlorine species (RCS) were dominant oxidants in UV/TCCA system. With TCCA dosage increasing in a relatively low concentration range (0.02-0.2 mM) and pH decreasing, the effectiveness of this AOP system would be strengthened. The influences of coexisting substances (Cl-, SO42-, CO32-, NO2- and NO3-) were explored. MIT degradation pathways were proposed and sulfur atom oxidation and carboxylation were considered as the dominant removal mechanisms of MIT. Frontier orbital theory and Fukui indexes of MIT were employed to further explore the degradation mechanism.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Humanos , Cloro/química , Rayos Ultravioleta , Agua , Cinética , Oxidación-Reducción , Contaminantes Químicos del Agua/análisis , Peróxido de HidrógenoRESUMEN
A green micellar stability-indicating high-performance liquid chromatography method was developed for rupatadine fumarate determination in existence with its main impurity desloratadine. Separation was attained using Hypersil ODS column (150 × 4.6 mm, 5 µm), the micellar mobile phase consisted of 0.13 M sodium dodecyl sulfate, 0.1 M disodium hydrogen phosphate adjusted by phosphoric acid to pH 2.8 and 10% n-butanol. The column was maintained at 45⦠C and detection was carried out at 267 nm. A linear response was achieved over the range of 2-160 µg/ml for rupatadine and 0.4-8 µg/ml for desloratadine. The method was applied for rupatadine determination in alergoliber tablets and alergoliber syrup without the interference of methyl paraben and propyl paraben present as main excipients. Rupatadine fumarate revealed pronounced susceptibility to oxidation; further study of oxidative degradation kinetics was carried out. Rupatadine was found to follow pseudo-first-order kinetics when exposed to 10% H2 O2 at 60 and 80°C and the activation energy was found to be 15.69 Kcal/mol. At a lower temperature (40°C), degradation kinetics regression was best fitted as a polynomial quadratic relationship, thus rupatadine oxidation at a lower temperature tends to adopt a second-order kinetics rate. Oxidative degradation product structure was revealed using infrared and found to be rupatadine N-oxide at all temperature values.
Asunto(s)
Micelas , Parabenos , Cromatografía Líquida de Alta Presión/métodos , Cinética , Comprimidos/química , Fumaratos , Estrés Oxidativo , Estabilidad de Medicamentos , Reproducibilidad de los ResultadosRESUMEN
The value of an integrated mathematical modelling approach for protein degraders which combines the benefits of traditional turnover models and fully mechanistic models is presented. Firstly, we show how exact solutions of the mechanistic models of monovalent and bivalent degraders can provide insight on the role of each system parameter in driving the pharmacological response. We show how on/off binding rates and degradation rates are related to potency and maximal effect of monovalent degraders, and how such relationship can be used to suggest a compound optimization strategy. Even convoluted exact steady state solutions for bivalent degraders provide insight on the type of observations required to ensure the predictive capacity of a mechanistic approach. Specifically for PROTACs, the structure of the exact steady state solution suggests that the total remaining target at steady state, which is easily accessible experimentally, is insufficient to reconstruct the state of the whole system at equilibrium and observations on different species (such as binary/ternary complexes) are necessary. Secondly, global sensitivity analysis of fully mechanistic models for PROTACs suggests that both target and ligase baselines (actually, their ratio) are the major sources of variability in the response of non-cooperative systems, which speaks to the importance of characterizing their distribution in the target patient population. Finally, we propose a pragmatic modelling approach which incorporates the insights generated with fully mechanistic models into simpler turnover models to improve their predictive ability, hence enabling acceleration of drug discovery programs and increased probability of success in the clinic.
Asunto(s)
Modelos Biológicos , Modelos Teóricos , Humanos , Proteínas , Descubrimiento de DrogasRESUMEN
The tandem mass spectrometry (MS/MS) approach employing an ion trap mass analyzer (IT) was evaluated in isomers recognition. The proposed approach consists of sole, simple, and rapid liquid chromatographic separation (HPLC) without requiring resolution between the analytes. Then, the MS/MS properties were optimized to solve the signal assignment using post-processing data elaboration (LEDA). The IT-MS/MS experiment uses the same site, helium as collision gas, and different time steps to modify the applied conditions on the studied ions. Nevertheless, helium cannot ensure the quick energization of the precursor ion due to its small cross-section. Then, different combinations between excitation amplitude (ExA) and excitation time (ExT) were tested to achieve the activation of the fragmentation channels and the formation of the MS/MS spectrum. Usually, the IT-MS/MS acquisition cycle is longer for other multistage instruments, decreasing the frequency of sample data collection and influencing the chromatographic profile. To solve these problems, two time segments were set up, and the elution conditions were optimized with a compromise between peaks distinction and run time reduction. The developed HPLC-MS/MS method was checked and applied to analyze a series of human plasma samples spiked with an equimolar mixture of pair of isomers.
Asunto(s)
Helio , Espectrometría de Masas en Tándem , Humanos , Cromatografía Líquida de Alta Presión , Espectrometría de Masas en Tándem/métodos , Cromatografía Liquida/métodos , AlgoritmosRESUMEN
Despite the identification of numerous bioplastic-degrading bacteria, the inconsistent rate of bioplastic degradation under differing cultivation conditions limits the intercomparison of results on biodegradation kinetics. In this study, we isolated a poly (Æ-caprolactone) (PCL)-degrading bacterium from a plastic-contaminated landfill and determined the principle-based biodegradation kinetics in a confined model system of varying cultivation conditions. Bacterial degradation of PCL films synthesized by different polymer number average molecular weights (Mn) and concentrations (% w/v) was investigated using both solid and liquid media at various temperatures. As a result, the most active gram-negative bacterial strain at ambient temperature (28 °C), designated CY2-9, was identified as Aquabacterium sp. Based on 16 S rRNA gene analysis. A clear zone around the bacterial colony was apparently exhibited during solid cultivation, and the diameter sizes increased with incubation time. During biodegradation processes in the PCL film, the thermal stability declined (determined by TGA; weight changes at critical temperature), whereas the crystalline proportion increased (determined by DSC; phase transition with temperature increment), implying preferential degradation of the amorphous region in the polymer structure. The surface morphologies (determined by SEM; electron optical system) were gradually hydrolyzed, creating destruction patterns as well as alterations in functional groups on film surfaces (determined by FT-IR; infrared spectrum of absorption or emission). In the kinetic study based on the weight loss of the PCL film (4.5 × 104 Da, 1% w/v), â¼1.5 (>±0.1) × 10-1 day-1 was obtained from linear regression for both solid and liquid media cultivation at 28 °C. The biodegradation efficiencies increased proportionally by a factor of 2.6-7.9, depending on the lower polymer number average molecular weight and lower concentration. Overall, our results are useful for measuring and/or predicting the degradation rates of PCL films by microorganisms in natural environments.
Asunto(s)
Plásticos , Poliésteres , Poliésteres/metabolismo , Espectroscopía Infrarroja por Transformada de Fourier , Cinética , Polímeros , Bacterias/metabolismoRESUMEN
BACKGROUND: Rutin is a natural bioactive flavonoid that is poor in water solubility and chemical stability. Encapsulation can be used to protect bioactive molecules from chemical or physical decomposition during food processing and storage. Thus, the effect of initial particle size on the ability of oil-in-water emulsions to retain rutin during storage was investigated. RESULTS: Rutin was encapsulated in oil-in-water emulsions with different mean surface-weighted diameters: d3,2 = 0.56 µm (small), 0.73 µm (medium), and 2.32 µm (large). As expected, the resistance of the emulsions to coalescence and creaming during storage increased as the particle size decreased due to weakening of the colloidal and gravitational forces acting on the droplets. The concentration of rutin in the emulsions decreased during storage (28 days), which was mainly attributed to photodegradation of the flavonoid. The loss of rutin from the emulsions during storage was fitted using a second-order equation. The rutin degradation rate constant k decreased and the half-life t1/2 increased with decreasing droplet size, which was attributed to the stronger encapsulation and light scattering by smaller oil droplets reducing the amount of light that can penetrate into the emulsions. CONCLUSION: This study has important implications for the design of more efficacious emulsion-based delivery systems for incorporating health-promoting nutraceuticals into foods. © 2022 Society of Chemical Industry.
Asunto(s)
Flavonoides , Rutina , Emulsiones/química , Tamaño de la Partícula , Cinética , Agua/químicaRESUMEN
BACKGROUND: The present study focused on the effect of isothermal treatment (5-90 °C) and pH (2.0-6.0) of aqueous olive leaf phenolic extract solutions on the kinetics of degradation of single and total phenolic compounds and radical scavenging activity, with the objective of predicting and optimizing the thermal treatments in foods enriched with olive leaf extracts. RESULTS: The major compound, oleuropein, showed higher degradation at low pH 2.0 and temperature-dependent reaction rates, which fitted well a first-order kinetic model, with an estimated activation energy of 98.03 ± 0.08 kJ mol-1 . Oleuropein hydrolysis resulted in a zero-order increase in hydroxytyrosol concentration at same pH (Ea = 71.59 ± 1.5 kJ mol-1 ), whereas a 100-fold slower degradation rate was observed at higher pH. Verbascoside was only degraded at pH 6.0, also following first-order kinetics. These changes in oleuropein and hydroxytyrosol concentrations led to significant changes in fluorescence maximum intensities centered around 315 and 360 nm and in the 425-500 nm spectral zone for samples at pH 6.0, which could be associated with verbacoside degradation. Conversely, analysis of total phenolic content and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity showed little changes, indicating a rather constant overall reducing capacity of the resulting pool of compounds after thermal treatments. CONCLUSION: The present study can contribute to the knowledge related to oleuropein and phenolic fraction degradation as a result of matrix (pH) and processing. The kinetic parameters obtained could be applied for predicting and optimizing the thermal treatments in foods and drinks enriched with olive leaf extracts. © 2022 Society of Chemical Industry.
Asunto(s)
Antioxidantes , Olea , Antioxidantes/química , Calor , Iridoides/química , Fenoles/química , Olea/química , Extractos Vegetales/química , Concentración de Iones de Hidrógeno , Hojas de la PlantaRESUMEN
Kinetic modeling of accelerated stability data serves an important purpose in the development of pharmaceutical products, providing support for shelf life claims and expediting the path to clinical implementation. In this context, a Bayesian kinetic modeling framework is considered, accommodating different types of nonlinear kinetics with temperature and humidity dependent rates of degradation and accounting for the humidity conditions within the packaging to predict the shelf life. In comparison to kinetic modeling based on nonlinear least-squares regression, the Bayesian approach allows for interpretable posterior inference, flexible error modeling and the opportunity to include prior information based on historical data or expert knowledge. While both frameworks perform comparably for high-quality data from well-designed studies, the Bayesian approach provides additional robustness when the data are sparse or of limited quality. This is illustrated by modeling accelerated stability data from two solid dosage forms and is further examined by means of artificial data subsets and simulated data.
Asunto(s)
Embalaje de Medicamentos , Estabilidad de Medicamentos , Teorema de Bayes , Cinética , TemperaturaRESUMEN
The objective of this study was to establish and to mathematically describe the phenol degrading properties of a new Acinetobacter towneri CFII-87 strain, isolated from a bioreactor treating landfill leachate. For this purpose, the biokinetic parameters of phenol biodegradation at various initial phenol concentrations of the A. towneri CFII-87 strain have been experimentally measured, and four different mathematical inhibition models (Haldane, Yano, Aiba and Edwards models) have been used to simulate the substrate-inhibited phenol degradation process. The results of the batch biodegradation experiments show that the new A. towneri CFII-87 strain grows on and metabolizes phenol up to 1000 mg/L concentration, manifests significant substrate inhibition and lag time only at concentrations above 800 mg/L phenol, and has a maximum growth rate at 300 mg/L initial phenol concentration. The comparison of the model predictions with the experimental phenol and biomass data revealed that the Haldane, Aiba and Edwards models can be used with success to describe the phenol biodegradation process by A. towneri CFII-87, while the Yano model, especially at higher initial phenol concentrations, fails to describe the process. The best performing inhibition model was the Edwards model, presenting correlation coefficients of R2 > 0.98 and modelling efficiency of ME > 0.94 for the prediction of biomass and phenol concentrations on the validation datasets. The calculated biokinetic model parameters place this new strain among the bacteria with the highest tolerance towards phenol. The results suggest that the A. towneri CFII-87 strain can potentially be used in the treatment of phenolic wastewaters.