Nano-hydroxyapatite/carbon nanotube: An excellent anode modifying material for improving the power output and diclofenac sodium removal of microbial fuel cells.

Anode material and surface properties have a crucial impact on the performance of MFCs. Designing and fabricating various modified carbon-based anodes with functional materials is an effective strategy to improve anode performance in MFCs. Anode materials with excellent bioaffinity can promote bacterial attachment, growth, and extracellular electron transfer. In this study, positively charged nano hydroxyapatite (nHA) with remarkable biocompatibility combined with carbon nanotubes (CNTs) with unique structure and high conductivity were used as anode modifying material. The nHA/CNTs modified carbon brush (CB) exhibited improved bacteria adsorption capacity, electrochemical activity and reticular porous structure, thus providing abundant sites and biocompatible microenvironment for the attachment and growth of functional microbial and accelerating extracellular electron transfer. Consequently, the nHA/CNTs/CB-MFCs achieved the maximum power density of 4.50 ± 0.23 mW m-2, which was 1.93 times higher than that of the CB-MFCs. Furthermore, diclofenac sodium (DS), which is a widely used anti-inflammatory drug and is also a persistent toxic organic pollutant constituting a serious threat to public health, was used as the model organic pollutant. After 322 days of long-term operation, enhanced diclofenac sodium removal efficiency and simultaneous bioelectricity generation were realized in nHA/CNTs/CB-MFCs, benefiting from the mature biofilm and the diverse functional microorganisms revealed by microbial community analysis. The nHA/CNTs/CB anode with outstanding bioaffinity, electrochemical activity and porous structure presents great potential for the fabrication of high-performance anodes in MFCs.

Decorating graphene oxide with zeolitic imidazolate framework (ZIF-8) and pseudo-boehmite offers ultra-high adsorption capacity of diclofenac in hospital effluents.

This study reports on an easy and scalable synthesis method of a novel magnetic nanocomposite (GO/ZIF-8/γ-AlOOH) based on graphene oxide (GO) nanosheets decorated with zeolitic imidazolate framework-8 (ZIF-8), pseudo-boehmite (γ-AlOOH), and iron oxide (Fe3O4) nanoparticles by combining solvothermal and solid-state dispersion (SSD) methods. The nanocomposite was successfully applied to remove of diclofenac sodium (DCF) - a widely used pharmaceutical - from water. Response Surface Methodology (RSM) was used to optimize the adsorption process and assess the interactions among the influencing factors on DCF removal efficiency; including contact time, adsorbent dosage, initial pH, solution temperature, and DCF concentration. Adsorption isotherm results showed a good fitting with the Langmuir isotherm model with an exceptional adsorption capacity value of 2594 mg g-1 at 30 °C, which was highly superior to the previously reported adsorbents. In addition, kinetic and thermodynamic investigations further illustrated that the adsorption process was fast (equilibrium time = 50 min) and endothermic. The regeneration of GO/ZIF-8/γ-AlOOH nanocomposite using acetic acid solution (10% v/v) after a simple magnetic separation was confirmed in five consecutive cycles, which eliminate the usage of organic solvents. The nanocomposite has also shown a superior performance in treating a simulated hospital effluent that contained various pharmaceuticals as well as other organic, and inorganic constituents.

Synthesis of chitosan composite iron nanoparticles for removal of diclofenac sodium drug residue in water.

Iron composite nanoparticles were prepared (90% yield) using macromolecule chitosan and characterized by spectroscopic techniques (FT-IR, XRD, SEM, TEM & EDX). These were utilized to remove diclofenac sodium in water. The adjusted parameters were 400 µg/ L, 50.0 min., 5.0, 2.0 g/ L and 25.0 °C as concentration, contact time, pH, adsorbent amount and temperature for the elimination of diclofenac sodium in water with maximum 85% elimination. The sorption was spontaneous with exothermic. Data followed Langmuir, Temkin and Dubinin-Radushkevich models. Thermodynamic parameter ΔG° values were -12.19, -13.74 and -15.67 kJ/mol at 20, 25 and 30 °C temperatures. The values of ΔH° and ΔS° were 8.58 and 20.84 kJ/mol. Pseudo-first-order and liquid film diffusion mechanisms were proposed for the adsorption. This adsorption method is fast, effective eco-friendly and low-cost as it may be used in natural circumstances of water resources. The sorption method may be applied for the elimination of diclofenac sodium in any water body at a huge and financial scale.