High-performance K-ion half/full batteries with superb rate capability and cycle stability.

SignificanceThe present work might be significant for exploring advanced K-ion batteries with superb rate capability and cycle stability toward practical applications. The as-assembled K-ion half cell exhibits an excellent rate capability of 428 mA h g-1 at 100 mA g-1 and a high reversible specific capacity of 330 mA h g-1 with 120% specific capacity retention after 2,000 cycles at 2,000 mA g-1, which is the best among those based on carbon materials. The as-constructed full cell delivers 98% specific capacity retention over 750 cycles at 500 mA g-1, superior to most of those based on carbon materials that have been reported thus far.

In Situ Fe-Substituted Hexacyanoferrate for High-Performance Aqueous Potassium Ion Batteries.

The eco-friendliness, safety, and affordability of aqueous potassium batteries (AKIBs) have made them popular for large-scale energy storage devices. However, the cycling and rate performance of research materials, particularly cobalt hexacyanoferrate, have yet to meet satisfactory standards. Herein, a room-temperature drafted K1.66 Fe0.25 Co0.75 [Fe(CN)6 ]·0.83H2 O (KFCHCF) sample is reported using an in situ substitution strategy. A higher concentration of ferrocyanide ions decreases the water content and increases the potassium content, while citric acid works as a chelating agent and is responsible for Fe-substitution in the KFCHCF sample. The resultant KFCHCF sample exhibits good rate performance, and about 97% and 90.6% of discharge capacity are conserved after 400 and 1000 cycles at 100 and 200 mA g-1 , respectively. The full cell using the KFCHCF cathode and 1,4,5,8-naphthalenetetracarboxylic dianhydride-derived polyimide (PNTCDA) anode maintains ≈74.93% and 74.35% of discharge capacity at 200 mA g-1 and 1000 mA g-1 for 1000 and >10,000 cycles, respectively. Furthermore, ex situ characterizations demonstrate the high reversibility of K-ions and structural stability during the charge-discharge process. Such high performance is attributed to the fast K-ion migration and crystal structure stabilization caused by in situ Fe-substitution in the KFCHCF sample. Other hexacyanoferrates can be synthesized using this method and used in grid-scale storage systems.

Fabrication of a Cation Exchange Membrane with Largely Reduced Anion Permeability for Advanced Aqueous K-ion Battery in an Alkaline-Neutral Electrolyte Decoupling System.

Herein, an efficient method to prepare sulfonated polyether ether ketone (SPEEK) based cation exchange membranes (CEMs) is developed, where polyethersulfone (PES) is used as an additive. The optimized membrane of 30 wt.%PES/SPEEK-M exhibits a rather low anion permeability and a high ionic conductivity of 9.52 mS cm-1 together with low volume swelling in water. Meanwhile, tensile strength of the membrane is as high as 31.4 MPa with a tensile strain of 162%. As separators for aqueous K-ion batteries (AKIBs) with decoupled gel electrolytes (Zn anode in alkaline and Prussian blue (FeHCF) cathode in neutral). Discharge voltage of the AKIB can reach 2.3 V. Meanwhile, Zn dendrites can be effectively suppressed in the gel anolyte. Specific capacities of the FeHCF cathode are 116.7 mAh g-1 at 0.3 A g-1 (close to its theoretical value), and 95.0 mAh g-1 at 1.0 A g-1 , indicating good rate performance. Capacity retention of the cathode is as high as 91.2% after 1000 cycles' cycling owing to the well remained neutral environment of the catholyte. There is almost no pH change for the catholyte after cycling, indicating good anion-blocking or cation-selecting ability of the 30 wt.%PES/SPEEK-M, much better than other membranes.

A Conformal Protective Skin Producing Stable Cathode-Electrolyte Interface for Long-Life Potassium-Ion Batteries.

The development of K-based layered oxide cathodes is essential for boosting the competitiveness of potassium-ion batteries (PIBs) in grid-scale energy storage. However, their service life is dramatically limited by interfacial instability issues, which is still poorly understood. In this work, amorphous FePO4 (a-FP) is built on K0.5 Ni0.1 Mn0.9 O2 (KNMO) as the protective skin, whose elasticity for strain relaxation and the K-conducting nature guarantee its integrity during fast and constant K-ion insertion/extraction. The conformal coating leads to a robust interphase on the cathode surface, which qualifies excellent K-transport ability and significantly suppresses the mechanical cracking and transition metal dissolution. Breakthrough in cycle life of the K-based layered cathodes is therefore achieved, which of the amorphous FePO4 coated K0.5 Ni0.1 Mn0.9 O2 (KNMO@a-FP) reaches 2500 cycles. The insights gained from the surface protection layer construction and the in-depth analysis of its working mechanism pave the way for further development of K-based layered cathodes with both bulk structural and interfacial stability.

A Novel Two-Dimensional ZnSiP2 Monolayer as an Anode Material for K-Ion Batteries and NO2 Gas Sensing.

Using the crystal-structure search technique and first-principles calculation, we report a new two-dimensional semiconductor, ZnSiP2, which was found to be stable by phonon, molecular-dynamic, and elastic-moduli simulations. ZnSiP2 has an indirect band gap of 1.79 eV and exhibits an anisotropic character mechanically. Here, we investigated the ZnSiP2 monolayer as an anode material for K-ion batteries and gas sensing for the adsorption of CO, CO2, SO2, NO, NO2, and NH3 gas molecules. Our calculations show that the ZnSiP2 monolayer possesses a theoretical capacity of 517 mAh/g for K ions and an ultralow diffusion barrier of 0.12 eV. Importantly, the ZnSiP2 monolayer exhibits metallic behavior after the adsorption of the K-atom layer, which provides better conductivity in a period of the battery cycle. In addition, the results show that the ZnSiP2 monolayer is highly sensitive and selective to NO2 gas molecules.

Vitreum Etching-Assisted Fabrication of Porous Hollow Carbon Architectures for Enhanced Capacitive Sodium and Potassium-Ion Storage.

Carbonaceous materials exhibit promising application in electrochemical energy storage especially for hollow or porous structure due to the fascinating and outstanding properties. Although there has been achieved good progress, controllable synthesis of hollow or porous carbons with uniform morphology by a green and easy way is still a challenge. Herein, a new artful and green approach is designed to controllably prepare hollow porous carbon materials with the assistance of boron oxide vitreum under a relatively low temperature of 500 °C. The vitreous B2 O3 provides a flowing carbonization environment and acts as etching agent accompanying with boron doping. By this general strategy, hollow and porous carbon architectures with various morphology of spheres and hollow polyhedrons are successfully fabricated by metal organic framework (MOF) precursors. Furthermore, such hollow carbon materials exhibit considerably excellent Na+ /K+ storage properties through enhanced capacitive behavior due to due to the highly porous structure and large surface area. It is notable that hollow carbon spheres display nearly 90% initial Coulombic efficiency, outstanding rate capability with 130 mAh g-1 at 30 A g-1 and long cycling life for sodium ion storage.

Amidation-Dominated Re-Assembly Strategy for Single-Atom Design/Nano-Engineering: Constructing Ni/S/C Nanotubes with Fast and Stable K-Storage.

An amidation-dominated re-assembly strategy is developed to prepare uniform single atom Ni/S/C nanotubes. In this re-assembly process, a single-atom design and nano-structured engineering are realized simultaneously. Both the NiO5 single-atom active centers and nanotube framework endow the Ni/S/C ternary composite with accelerated reaction kinetics for potassium-ion storage. Theoretical calculations and electrochemical studies prove that the atomically dispersed Ni could enhance the convention kinetics and decrease the decomposition energy barrier of the chemically-absorbed small-molecule sulfur in Ni/S/C nanotubes, thus lowering the electrode reaction overpotential and resistance remarkably. The mechanically stable nanotube framework could well accommodate the volume variation during potassiation/depotassiation process. As a result, a high K-storage capacity of 608 mAh g-1 at 100 mA g-1 and stable cycling capacity of 330.6 mAh g-1 at 1000 mA g-1 after 500 cycles are achieved.

Superior Potassium Ion Storage via Vertical MoS2 "Nano-Rose" with Expanded Interlayers on Graphene.

Potassium has its unique advantages over lithium or sodium as a charge carrier in rechargeable batteries. However, progresses in K-ion battery (KIB) chemistry have so far been hindered by lacking suitable electrode materials to host the relatively large K+ ions compared to its Li+ and Na+ counterparts. Herein, molybdenum disulfide (MoS2 ) "roses" grown on reduced graphene oxide sheets (MoS2 @rGO) are synthesized via a two-step solvothermal route. The as-synthesized MoS2 @rGO composite, with expanded interlayer spacing of MoS2 , chemically bonded between MoS2 and rGO, and a unique nano-architecture, displays the one of the best electrochemical performances to date as an anode material for nonaqueous KIBs. More importantly, a combined K+ storage mechanism of intercalation and conversion reaction is also revealed. The findings presented indicate the enormous potential of layered metal dichalcogenides as advanced electrode materials for high-performance KIBs and also provide new insights and understanding of K+ storage mechanism.

High Entropy-Induced Kinetics Improvement and Phase Transition Suppression in K-Ion Battery Layered Cathodes.

Layered oxides are widely accepted to be promising cathode candidate materials for K-ion batteries (KIBs) in terms of their rich raw materials and low price, while their further applications are restricted by sluggish kinetics and poor structural stability. Here, the high-entropy design concept is introduced into layered KIB cathodes to address the above issues, and an example of high-entropy layered K0.45Mn0.60Ni0.075Fe0.075Co0.075Ti0.10Cu0.05Mg0.025O2 (HE-KMO) is successfully prepared. Benefiting from the high-entropy oxide with multielement doping, the developed HE-KMO exhibits half-metallic oxide features with a narrow bandgap of 0.19 eV. Increased entropy can also reduce the surface energy of the {010} active facets, resulting in about 2.6 times more exposure of the {010} active facets of HE-KMO than the low-entropy K0.45MnO2 (KMO). Both can effectively improve the kinetics in terms of electron conduction and K+ diffusion. Furthermore, high entropy can inhibit space charge ordering during K+ (de)insertion, and the transition metal-oxygen covalent interaction of HE-KMO is also enhanced, leading to suppressed phase transition of HE-KMO in 1.5-4.2 V and better electrochemical stability of HE-KMO (average capacity drop of 0.20%, 200 cycles) than the low-entropy KMO (average capacity drop of 0.41%, 200 cycles) in the wide voltage window.

Relaxation of Stress Propagation in Alloying-Type Sn Anodes for K-Ion Batteries.

Alloying-type metallic tin is perceived as a potential anode material for K-ion batteries owing to its high theoretical capacity and reasonable working potential. However, pure Sn still face intractable issues of inferior K+ storage capability owing to the mechanical degradation of electrode against large volume changes and formation of intermediary insulating phases K4 Sn9 and KSn during alloying reaction. Herein, the TiC/C-carbon nanotubes (CNTs) is prepared as an effective buffer matrix and composited with Sn particles (Sn-TiC/C-CNTs) through the high-energy ball-milling method. Owing to the conductive and rigid properties, the TiC/C-CNTs matrix enhances the electrical conductivity as well as mechanical integrity of Sn in the composite material and thus ultimately contributes to performance supremacy in terms of electrochemical K+ storage properties. During potassiation process, the TiC/C-CNTs matrix not only dissipates the internal stress toward random radial orientations within the Sn particle but also provides electrical pathways for the intermediate insulating phases; this tends to reduce microcracking and prevent considerable electrode degradation.