Evaluation of treatment of methicillin-resistant Staphylococcus aureus biofilms with intermittent electrochemically generated H2O2 or HOCl.

Chronic wound infections can be difficult to treat and may lead to impaired healing and worsened patient outcomes. Novel treatment strategies are needed. This study evaluated the effects of intermittently produced hydrogen peroxide (H2O2) and hypochlorous acid (HOCl), generated via an electrochemical bandage (e-bandage), against methicillin-resistant Staphylococcus aureus biofilms in an agar membrane biofilm model. By changing the working electrode potential, the e-bandage generated either HOCl (1.5 VAg/AgCl) or H2O2 (-0.6 VAg/AgCl). The degree of biocidal activity of intermittent treatment with HOCl and H2O2 correlated with HOCl treatment time; HOCl treatment durations of 0, 1.5, 3, 4.5, and 6 hours (with the rest of the 6-hour total treatment time devoted to H2O2 generation) resulted in mean biofilm reductions of 1.36 ± 0.2, 2.22 ± 0.16, 3.46 ± 0.38, 4.63 ± 0.74, and 7.66 ± 0.5 log CFU/cm2, respectively, vs. non-polarized controls, respectively. However, application of H2O2 immediately after HOCl treatment was detrimental to biofilm removal. For example, 3 hours HOCl treatment followed by 3 hours H2O2 resulted in a 1.90 ± 0.84 log CFU/cm2 lower mean biofilm reduction than 3 hours HOCl treatment followed by 3 hours non-polarization. HOCl generated over 3 hours exhibited biocidal activity for at least 7.5 hours after e-bandage operation ceased; 3 hours of HOCl generation followed by 7.5 hours of non-polarization resulted in a biofilm cell reduction of 7.92 ± 0.12 log CFU/cm2 vs. non-polarized controls. Finally, intermittent treatment with HOCl (i.e., interspersed with periods of e-bandage non-polarization) for various intervals showed similar effects (approximately 6 log CFU/cm2 reduction vs. non-polarized control) to continuous treatment with HOCl for 3 hours, followed by 3 hours of non-polarization. These findings suggest that timing and sequencing of HOCl and H2O2 treatments are crucial for maximizing biofilm control when using an e-bandage strategy.

Introduction of a ß-leucine residue instead of leucine9 and glycine10 residues in Temporin L for improved cell selectivity, stability and activity against planktonic and biofilm of methicillin resistant S. aureus.

Leucine and glycine residues, at the 9th and 10th positions of helical domain of naturally occurring antimicrobial peptide (AMP), Temporin L were substituted with an unnatural amino acid, ß-leucine (homovaline) to improve its serum protease stability, haemolytic/cytotoxic properties and reduce the size to some extent. The designed analogue, L9ßl-TL showed either equal or improved antimicrobial activity to TL against different microorganisms including the resistant strains. Interestingly, L9ßl-TL also exhibited lower haemolytic and cytotoxic activities against human red blood cells and 3T3 cells, respectively. Moreover, L9ßl-TL showed antibacterial activity in presence of 25% (v/v) human serum and showed resistance against proteolytic cleavage in presence of it that suggested the serum protease stability of the TL-analogue. L9ßl-TL exhibited un-ordered secondary structures in both bacterial and mammalian membrane mimetic lipid vesicles as compared to the helical structures of TL in these environments. However, tryptophan fluorescence studies demonstrated more selective interaction of L9ßl-TL with bacterial membrane mimetic lipid vesicles in comparison to non-selective interactions of TL with both kinds of lipid vesicles. Membrane depolarization studies with live MRSA and bacterial membrane-mimetic lipid vesicles suggested a membrane-disrupting mode of action of L9ßl-TL. L9ßl-TL showed faster bactericidal mechanism compared to TL against MRSA. Interestingly, L9ßl-TL was found as more potent than TL either in inhibiting biofilm formation or in eradicating the mature biofilm formed by MRSA. Overall, the present work demonstrates a simple and useful strategy to design of an analogue of TL, with minimal modifications while maintaining its antimicrobial activity with lesser toxicity and higher stability which could be attempted for other AMPs as well.

Synthesis and biofilm inhibition studies of 2-(2-amino-6-arylpyrimidin-4-yl)quinazolin-4(3H)-ones.

Synthesis of novel 4(3H)-quinazolinonyl aminopyrimidine derivatives has been achieved via quinazolinonyl enones which in turn were obtained from 2-acyl-4(3H)-quinazolinone. They have been assayed for biofilm inhibition against Gram-positive (methicillin-resistant Staphylococcus aureus (MRSA)) and Gram-negative bacteria (Acinetobacter baumannii). The analogues with 2,4,6-trimethoxy phenyl, 4-methylthio phenyl, and 3-bromo phenyl substituents (5h, 5j & 5k) have been shown to inhibit biofilm formation efficiently in MRSA with IC50 values of 20.7-22.4 µM). The analogues 5h and 5j have demonstrated low toxicity in human cells in vitro and can be investigated further as leads.

Bioactivity of Spongian Diterpenoid Scaffolds from the Antarctic Sponge Dendrilla antarctica.

The Antarctic sponge Dendrilla antarctica is rich in defensive terpenoids with promising antimicrobial potential. Investigation of this demosponge has resulted in the generation of a small chemical library containing diterpenoid secondary metabolites with bioactivity in an infectious disease screening campaign focused on Leishmania donovani, Plasmodium falciparum, and methicillin-resistant Staphylococcus aureus (MRSA) biofilm. In total, eleven natural products were isolated, including three new compounds designated dendrillins B-D (10-12). Chemical modification of abundant natural products led to three semisynthetic derivatives (13-15), which were also screened. Several compounds showed potency against the leishmaniasis parasite, with the natural products tetrahydroaplysulphurin-1 (4) and dendrillin B (10), as well as the semisynthetic triol 15, displaying single-digit micromolar activity and low mammalian cytotoxicity. Triol 15 displayed the best profile against the liver-stage malaria parasites, while membranolide (5) and dendrillin C (11) were strong hits against MRSA biofilm cultures.

Genomic analyses of two novel biofilm-degrading methicillin-resistant Staphylococcus aureus phages.

BACKGROUND: Methicillin-resistant Staphylococcus aureus (MRSA) biofilm producers represent an important etiological agent of many chronic human infections. Antibiotics and host immune responses are largely ineffective against bacteria within biofilms. Alternative actions and novel antimicrobials should be considered. In this context, the use of phages to destroy MRSA biofilms presents an innovative alternative mechanism. RESULTS: Twenty-five MRSA biofilm producers were used as substrates to isolate MRSA-specific phages. Despite the difficulties in obtaining an isolate of this phage, two phages (UPMK_1 and UPMK_2) were isolated. Both phages varied in their ability to produce halos around their plaques, host infectivity, one-step growth curves, and electron microscopy features. Furthermore, both phages demonstrated antagonistic infectivity on planktonic cultures. This was validated in an in vitro static biofilm assay (in microtiter-plates), followed by the visualization of the biofilm architecture in situ via confocal laser scanning microscopy before and after phage infection, and further supported by phages genome analysis. The UPMK_1 genome comprised 152,788 bp coding for 155 putative open reading frames (ORFs), and its genome characteristics were between the Myoviridae and Siphoviridae family, though the morphological features confined it more to the Siphoviridae family. The UPMK_2 has 40,955 bp with 62 putative ORFs; morphologically, it presented the features of the Podoviridae though its genome did not show similarity with any of the S. aureus in the Podoviridae family. Both phages possess lytic enzymes that were associated with a high ability to degrade biofilms as shown in the microtiter plate and CLSM analyses. CONCLUSIONS: The present work addressed the possibility of using phages as potential biocontrol agents for biofilm-producing MRSA.

Optimal Irrigation and Debridement of Infected Total Joint Implants with Chlorhexidine Gluconate.

Previous study at our institution demonstrated that scrubbing a methicillin-resistant Staphylococcus aureus (MRSA)-coated titanium disk with chlorhexidine gluconate (CG) solution achieved superior biofilm eradication compared to alternative solutions. The current study aimed to identify the minimum CG concentration for effective bacteria eradication of an in vitro periprosthetic joint infection (PJI) model. MRSA colony-forming units (CFUs) were counted following simulated irrigation and debridement with varying CG solutions before and after a 24-hour reincubation period. Significant decrease was noted on all disks before reincubation. Postreincubation, significant decrease in CFUs was found in the 4% and 2% groups. This study demonstrated that I+D of an infected PJI model with 4% CG solution was effective at treating MRSA biofilm at concentrations as low as 2%.

Charge adaptive phytochemical-based nanoparticles for eradication of methicillin-resistant staphylococcus aureus biofilms.

The intrinsic resistance of MRSA coupled with biofilm antibiotic tolerance challenges the antibiotic treatment of MRSA biofilm infections. Phytochemical-based nanoplatform is a promising emerging approach for treatment of biofilm infection. However, their therapeutic efficacy was restricted by the low drug loading capacity and lack of selectivity. Herein, we constructed a surface charge adaptive phytochemical-based nanoparticle with high isoliquiritigenin (ISL) loading content for effective treatment of MRSA biofilm. A dimeric ISL prodrug (ISL-G2) bearing a lipase responsive ester bond was synthesized, and then encapsulated into the amphiphilic quaternized oligochitosan. The obtained ISL-G2 loaded NPs possessed positively charged surface, which allowed cis-aconityl-d-tyrosine (CA-Tyr) binding via electrostatic interaction to obtain ISL-G2@TMDCOS-Tyr NPs. The NPs maintained their negatively charged surface, thus prolonging the blood circulation time. In response to low pH in the biofilms, the fast removal of CA-Tyr led to a shift in their surface charge from negative to positive, which enhanced the accumulation and penetration of NPs in the biofilms. Sequentially, the pH-triggered release of d-tyrosine dispersed the biofilm and lipase-triggered released of ISL effectively kill biofilm MRSA. An in vivo study was performed on a MRSA biofilm infected wound model. This phytochemical-based system led to ∼2 log CFU (>99 %) reduction of biofilm MRSA as compared to untreated wound (P < 0.001) with negligible biotoxicity in mice. This phytochemical dimer nanoplatform shows great potential for long-term treatment of resistant bacterial infections.

Evaluation of Treatment of Methicillin-Resistant Staphylococcus aureus Biofilms with Intermittent Electrochemically-Generated H2O2 or HOCl.

Chronic wound infections can be difficult to treat and may lead to impaired healing and worsened patient outcomes. Novel treatment strategies are needed. This study evaluated effects of intermittently produced H2O2 and HOCl, generated via an electrochemical bandage (e-bandage), against methicillin-resistant Staphylococcus aureus biofilms in an agar membrane biofilm model. By changing the working electrode potential, the e-bandage generated either HOCl (1.5 VAg/AgCl) or H2O2 (-0.6 VAg/AgCl). The degree of biocidal activity of intermittent treatment with HOCl and H2O2 correlated with HOCl treatment time; HOCl treatment durations of 0, 1.5, 3, 4.5, and 6 hours (with the rest of the 6 hour total treatment time devoted to H2O2 generation) resulted in mean biofilm reductions of 1.36±0.2, 2.22±0.16, 3.46±0.38, 4.63±0.74 and 7.66±0.5 log CFU/cm2, respectively vs. non-polarized controls, respectively. However, application of H2O2 immediately after HOCl treatment was detrimental to biofilm removal. For example, 3-hours HOCl treatment followed by 3-hours H2O2 resulted in a 1.90±0.84 log CFU/cm2 lower mean biofilm reduction than 3-hours HOCl treatment followed by 3-hours non-polarization. HOCl generated over 3-hours exhibited biocidal activity for at least 7.5-hours after e-bandage operation ceased; 3-hours of HOCl generation followed by 7.5-hours of non-polarization resulted in a biofilm cell reduction of 7.92±0.12 log CFU/cm2 vs. non polarized controls. Finally, intermittent treatment with HOCl (i.e., interspersed with periods of e-bandage non-polarization) for various intervals showed similar effects (approximately 6 log CFU/cm2 reduction vs. non-polarized control) to continuous treatment with HOCl for 3-hours, followed by 3-hours of non-polarization. These findings suggest that timing and sequencing of HOCl and H2O2 treatments are crucial for maximizing biofilm control.

Synergistic berberine chloride and Curcumin-Loaded nanofiber therapies against Methicillin-Resistant Staphylococcus aureus Infection: Augmented immune and inflammatory responses in zebrafish wound healing.

BACKGROUND: Wound healing pivots on a finely orchestrated inflammatory cascade, critical for tissue repair. Chronic wounds, compounded by persistent inflammation and susceptibility to infection, pose formidable clinical challenges. Nanofiber dressings offer promising avenues for wound care, yet their interaction with inflammation and infection remains elusive. We aim to delineate the inflammatory cascade preceding wound closure and assess Cu@Bbc nanofibers' therapeutic efficacy in mitigating inflammation and combating infection. Their unique attributes suggest promise in modulating inflammation, fostering tissue regeneration, and preventing microbial colonization. Investigating the intricate interplay between nanofiber scaffolds, inflammation, and infection may unveil mechanisms of enhanced wound healing. Our findings could stimulate the development of tailored dressings, urgently needed for effective wound management amidst immune dysregulation, infection, and inflammation. METHODS: In this investigation, we synthesized Cu@Bbc nanofibers, incorporating curcumin and berberine chloride, for wound healing applications. We evaluated their individual and combined antibacterial, anti-biofilm, and antioxidant activities, alongside binding affinity with pro-inflammatory cytokines through molecular docking. Morphological characterization was conducted via SEM, FTIR assessed functional groups, and wettability contact angle measured hydrophobic properties. The physical properties, including tensile strength, swelling behavior, and thermal stability, were evaluated using tensile testing, saline immersion method and thermogravimetric analysis. Biodegradability of the nanofibers was assessed through a soil burial test. Biocompatibility was determined via MTT assay, while wound healing efficacy was assessed with in vitro scratch assays. Controlled drug release and antibacterial activity against MRSA were examined, with in vivo assessment in a zebrafish model elucidating inflammatory responses and tissue remodeling. RESULTS: In this study, the synergistic action of curcumin and berberine chloride exhibited potent antibacterial efficacy against MRSA, with significant anti-mature biofilm disruption. Additionally, the combination demonstrated heightened antioxidant potential. Molecular docking studies revealed strong binding affinity with pro-inflammatory cytokines, suggesting a role in expediting the inflammatory response crucial for wound healing. Morphological analysis confirmed nanofiber quality, with drug presence verified via FTIR spectroscopy. Cu@Bbc demonstrated higher tensile strength, optimal swelling behavior, and robust thermal stability as evaluated through tensile testing and thermogravimetric analysis. Additionally, the Cu@Bbc nanofiber showed enhanced biodegradability, as confirmed by the soil burial test. Biocompatibility assessments showed favorable compatibility, while in vitro studies demonstrated potent antibacterial activity. In vivo zebrafish experiments revealed accelerated wound closure, re-epithelialization, and heightened immune response, indicative of enhanced wound healing. CONCLUSION: In summary, our investigation highlights the efficacy of Cu@Bbc nanofibers, laden with curcumin and berberine chloride, in displaying robust antibacterial and antioxidant attributes while also modulating immune responses and inflammatory cascades essential for wound healing. These results signify their potential as multifaceted wound dressings for clinical implementation.

Multifunctional NIR-II nanoplatform for disrupting biofilm and promoting infected wound healing.

Healing wounds presents a significant challenge due to bacterial biofilm infections and the inherent drug resistance of these biofilms. This report introduces a multifunctional nanoplatform (NPs) designed to combat wound biofilm infections using NIR-II photothermal therapy. The NPs are self-assembled from amphiphilic polymers (AP) to encapsulate photothermal polymers (PT) through classic electrostatic interactions. Importantly, these NPs are electrically neutral, which enhances their ability to penetrate biofilms effectively. Once inside the biofilm, the NPs achieve complete thermal ablation of the biofilm under NIR-II laser irradiation. Additionally, when exposed to laser and the GSH microenvironment, the NPs exhibit strong photothermal effects and self-degradation capabilities. In vitro tests confirm that the NPs have excellent antibacterial and anti-biofilm properties against methicillin-resistant Staphylococcus aureus (MRSA). In vivo studies demonstrate that the NPs can efficiently clear wound biofilm infections and promote wound healing. Notably, the NPs show superior photothermal effects under NIR-II laser irradiation compared to NIR-I lasers. In summary, the developed NPs serve as an integrated diagnostic and therapeutic nano-antimicrobial agent, offering promising applications for biofilm wound infections and wound healing.

PLA-HPG based coating enhanced anti-biofilm and wound healing of Shikonin in MRSA-infected burn wound.

Burn wounds are susceptible to bacterial infections, including Methicillin-resistant Staphylococcus aureus (MRSA), which typically form biofilms and exhibit drug resistance. They also have specific feature of abundant exudate, necessitating frequent drug administration. Shikonin (SKN) has been reported to reverse MRSA drug resistance and possesses anti-biofilm and wound healing properties, however, it suffers from drawbacks of low solubility and instability. In this study, we developed PLA-HPG based bioadhesive nanoparticles SKN/BNP, which demonstrated a drug loading capacity of about 3.6%, and exhibited sustained-release behavior of SKN. The aldehyde groups present on the surface of BNP improved the local adhesion of SKN/BNP both in vitro and in vivo, thereby reducing the frequency of drug dosing in exudate-rich burn wounds. BNP alone enhanced proliferation and migration of the fibroblast, while SKN/BNP promoted fibroblast proliferation and migration as well as angiogenesis. Due to its bioadhesive property, BNP directly interacted with biofilm and enhanced the efficacy of SKN against MRSA biofilm in vitro. In a mouse model of MRSA-infected burn wounds, SKN/BNP demonstrated improved anti-biofilm and wound healing efficiency. Overall, our findings suggest that SKN/BNP holds great promise as a novel and effective treatment option for clinical applications in MRSA-infected burn wounds.

A Sustained-Release Nanosystem with MRSA Biofilm-Dispersing and -Eradicating Abilities Accelerates Diabetic Ulcer Healing.

Introduction: Drug-resistant bacterial infections and biofilm formation play important roles in the pathogenesis of diabetic refractory wounds. Tea tree oil (TTO) exhibits antimicrobial, antimycotic, and antiviral activities, especially against common clinically resistant strains, such as methicillin-resistant Staphylococcus aureus (MRSA), making it a potential natural antimicrobial for the treatment of acute and chronic wounds. However, TTO is insoluble in water, volatile, light-sensitive, and cytotoxic. While previous macroscopic studies have focused on sterilization with TTO, none have sought to alter its structure or combine it with other materials to achieve sustained release. Methods: Electrospun TTO nanoliposomes (TTO-NLs), arranged linearly via high-pressure homogenization, could stabilize the structure and performance of TTO to achieve slow drug release. Herein, we established a composite nano-sustained release system, TTO-NL/polyvinyl alcohol/chitosan (TTO-NL@PCS), using high-voltage electrospinning. Results: Compared with the control, TTO-NL@PCS exhibits higher concentrations of the active TTO drug components, terpinen-4-ol and 1,8-cineole. Owing to its increased stability and slow release, early exposure to TTO-NL@PCS increases the abundance of reactive oxygen species in vitro, ultimately causing the biofilm to disperse and completely killing MRSA without inducing cytotoxic effects to the host. Moreover, in BKS-Leprem2Cd479/Gpt mice with a whole-layer skin infection, untargeted metabolomics analysis of wound exudates reveals upregulated PGF2α/FP receptor signaling and interleukin (IL)-1ß and IL-6 expression following application of the composite system. The composite also ameliorates the chemotaxis disorder in early treatment and attenuates the wound inflammatory response during the repair stage of diabetic inflammatory wounds, and upregulates VEGF expression in the wound bed. Conclusion: TTO-NL@PCS demonstrates the remarkable potential for accelerating diabetic and MRSA-infected wound healing.

Harnessing the power of PLA-PEG nanoparticles for Linezolid delivery against methicillin-resistant Staphylococcus aureus.

This study deals with the development of novel poly(lactic acid)-poly(ethylene glycol) nanoparticles (PLA-PEG NPs) for the efficient and prolonged delivery of Linezolid (LNZ), a synthetic antibacterial agent used against methicillin-resistant Staphylococcus aureus (MRSA). A two-step synthetic strategy based on carbodiimide coupling and copper-catalyzed azide-alkyne cycloaddition was first exploited for the conjugation of PLA with PEG. The encapsulation of LNZ into medium-molecular-weight PLA-PEG NPs was carried out by different methods including nanoprecipitation and dialysis. The optimal PLA-PEG@LNZ nanoformulation resulted in 3.5% LNZ payload (15% encapsulation efficiency, with a 10:3 polymer to drug mass ratio) and sustained release kinetics with 65% of entrapped antibiotic released within 80 h. Moreover, the zeta potential values (from -31 to -39 mV) indicated a good stability without agglomeration even after freeze-drying and lyophilization. The PLA-PEG@LNZ NPs exerted antimicrobial activity against a panel of Gram-positive bacteria responsible for human infections, such as Staphylococcus aureus including MRSA, Staphylococcus epidermidis, Staphylococcus lugdunensis and vancomycin-resistant Enterococcus faecium (VREfm). Moreover, PLA-PEG@LNZ NPs showed inhibitory activity on both planktonic growth and preformed biofilm of MRSA. The antibacterial activity of LNZ incorporated in polymeric NPs was well preserved and the nanosystem served as an antibiotic enhancer with a potential role in MRSA-associated infections management.

Ultrasound-Enhanced Antibacterial Activity of Polymeric Nanoparticles for Eradicating Bacterial Biofilms.

Bacterial biofilms are a major healthcare concern resulting in refractory conditions such as chronic wounds, implant infections and failure, and multidrug-resistant infections. Aggressive and invasive strategies are employed to cure biofilm infections but are prone to long and expensive treatments, adverse side-effects, and low patient compliance. Recent strategies such as ultrasound-based therapies and antimicrobial nanomaterials have shown some promise in the effective eradication of biofilms. However, maximizing therapeutic effect while minimizing healthy tissue damage is a key challenge that needs to be addressed. Here a combination treatment involving ultrasound and antimicrobial polymeric nanoparticles (PNPs) that synergistically eradicate bacterial biofilms is reported. Ultrasound treatment rapidly disrupts biofilms and increases penetration of antimicrobial PNPs thereby enhancing their antimicrobial activity. This results in superior biofilm toxicity, while allowing for a two- to sixfold reduction in both the concentration of PNPs as well as the duration of ultrasound. Furthermore, that this reduction minimizes cytotoxicity toward fibroblast cells, while resulting in a 100- to 1000-fold reduction in bacterial concentration, is demonstrated.

Enhanced Near-Infrared Photocatalytic Eradication of MRSA Biofilms and Osseointegration Using Oxide Perovskite-Based P-N Heterojunction.

Methicillin-resistant Staphylococcus aureus (MRSA) biofilm infections after orthopedic implant increase the risk of failure and potentially cause amputation of limbs or life-threatening sepsis in severe cases. Additionally, satisfactory bone-implant integration is another important indicator of an ideal implant. Here, an antibiotic-free antibacterial nanofilm based on oxide perovskite-type calcium titanate (CTO)/fibrous red phosphorus (RP) on titanium implant surface (Ti-CTO/RP) in which the P-N heterojunction and internal electric field are established at the heterointerface, is designed. Near-infrared light-excited electron-hole pairs are effectively separated and transferred through the synergism of the internal electric field and band offset, which strongly boosts the photocatalytic eradication of MRSA biofilms by reactive oxygen species with an efficacy of 99.42% ± 0.22% in vivo. Additionally, the charge transfer endows the heterostructure with hyperthermia to assist biofilm eradication. Furthermore, CTO/RP nanofilm provides a superior biocompatible and osteoconductive platform that enables the proliferation and osteogenic differentiation of mesenchymal stem cells, thus contributing to the subsequent implant-to-bone osseointegration after eradicating MRSA biofilms.

pH responsive superporogen combined with PDT based on poly Ce6 ionic liquid grafted on SiO2 for combating MRSA biofilm infection.

Background: Biofilm infection caused by multidrug-resistant bacteria is difficult to eradicate by conventional therapies. Photodynamic therapy (PDT) is an effective antibacterial method for fighting against biofilm infection. However, the blocked photosensitizers outside of biofilm greatly limit the efficacy of PDT. Methods: Herein, a novel acid-responsive superporogen and photosensitizer (SiO2-PCe6-IL) was developed. Because of the protonation of the photosensitizer and the high binding energy of the polyionic liquid, SiO2-PCe6-IL changed to positive SiO2-PIL+ in an acidic microenvironment of biofilm infection. SiO2-PIL+ could combine with negatively charged extracellular polymeric substances (EPS) and create holes to remove the biofilm barrier. To strengthen the interaction between SiO2-PIL+ and EPS, SiO2-PIL+ of high charge density was prepared by grafting the high-density initiation site of ATRP onto the surface of the SiO2 base. Results: Due to the rapid protonation rate of COO- and the strong binding energy of SiO2-PIL+ with EPS, SiO2-PCe6-IL could release 90% of Ce6 in 10 s. With the stronger electrostatic and hydrophobic interaction of SiO2-PIL+ with EPS, the surface potential, hydrophobicity, adhesion and mechanical strength of biofilm were changed, and holes in the biofilm were created in 10 min. Combining with the release of photosensitizers and the porous structure of the biofilm, Ce6 was efficiently concentrated in the biofilm. The in vitro and in vivo antibacterial experiments proved that SiO2-PCe6-IL dramatically improved the PDT efficacy against MRSA biofilm infection. Conclusion: These findings suggest that SiO2-PCe6-IL could rapidly increase the concentration of photosensitizer in biofilm and it is an effective therapy for combating biofilm infection.

Chitosan-based nitric oxide-releasing dressing for anti-biofilm and in vivo healing activities in MRSA biofilm-infected wounds.

Bacterial biofilms on wounds impair the healing process and often lead to chronic wounds. Chitosan is a well-known biopolymer with antimicrobial and anti-biofilm effects. S-nitrosoglutathione (GSNO) has been identified as a promising nitric oxide (NO) donor to defend against pathogenic biofilms and enhance wound healing activities. In this study, we prepared NO-releasing chitosan film (CS/NO film) and evaluated its anti-biofilm activity and in vivo wound healing efficacy against methicillin-resistant Staphylococcus aureus (MRSA) biofilm-infected wounds in diabetic mice. The in vitro release study showed sustained release of NO over 3 days in simulated wound fluid. The CS/NO film significantly enhanced antibacterial activity against MRSA by > 3 logs reduction in bacterial viability. Moreover, CS/NO film exhibited a 3-fold higher anti-biofilm activity than the control and CS film. In in vivo MRSA biofilm-infected wounds, the CS/NO film-treated group showed faster biofilm dispersal, wound size reduction, epithelialization rates, and collagen deposition than the untreated and CS film-treated groups. Therefore, the CS/NO film investigated in this study could be a promising approach for the treatment of MRSA biofilm-infected wounds.

Sol-Gel-Derived Bioactive and Antibacterial Multi-Component Thin Films by the Spin-Coating Technique.

Although metallic alloys commonly used as prosthetics are durable and mechanically strong, they are often bioinert and lack antibacterial properties. Implementing a bioactive glass material with antibacterial properties as a coating on a metallic substrate provides mechanical strength and bioactivity, as well as antibacterial properties. Many coating methods have been extensively investigated; however, most of them can be expensive, are difficult to scale up, or do not form thin films, which could prevent their translation to clinical practice. The formation of thin films by spin-coating multi-component solution-gelation (sol-gel)-derived glass with antibacterial and bioactive properties has not been achieved previously. For this study, stainless steel 316L substrates were spin-coated with a sol-gel-derived bioactive and antibacterial glass coating in SiO2 58.3-P2O5 7.1-CaO 25.6-Al2O5 5.4-Ag2O 2.1-Na2O 1.5 wt% system (Ag-BG). A sol-gel processing condition that avoids elemental separation upon spin-coating when sintering happens at below the calcination temperature (500 °C) has been developed. This work demonstrates that silver reduction occurs when the concentrations of other cations such as Ca2+ and Na+ in the solution increase. Increasing the stirring duration time prior to the increase of cations, Ag+ ions are stabilized by aluminum tetrahedra, and their reduction to metallic silver does not occur. This study also shows that large dilution ratios (water:tetraethyl orthosilicate) greater than 25:1, accompanied by long stirring durations, produce morphologically homogeneous coatings. Using this strategy, thin films were formed with antibacterial properties against methicillin-resistant Staphylococcus aureus (MRSA) biofilm and biological responses that promote eukaryotic cell adhesion and proliferation. In total, the improved synthesis strategy opens new avenues for the development of novel bioactive and antibacterial thin-film coatings, as it reveals the processing characteristics that control the physicochemical and morphological properties of the formed films.

Naphthylthiazoles: Targeting Multidrug-Resistant and Intracellular Staphylococcus aureus with Biofilm Disruption Activity.

Thirty-two new naphthylthiazole derivatives were synthesized with the aim of exploring their antimicrobial effect on multidrug-resistant Gram-positive bacteria. Compounds 25 and 32, with ethylenediamine and methylguanidine side chains, represent the most promising derivatives, as their antibacterial spectrum includes activity against multidrug-resistant staphylococcal and enterococcal strains. Moreover, the new derivatives are highly advantageous over the existing frontline therapeutics for the treatment of multidrug-resistant Gram-positive bacteria. In this vein, compound 25 possesses three attributes: no bacterial resistance was developed against it even after 15 passages, it was very efficient in targeting intracellular pathogens, and it exhibited a concentration-dependent ability to disrupt the preformed bacterial biofilm.