Possible sources of rare earth elements near different classes of road in Poland and their phytoextraction to herbaceous plant species.

The growing use of rare earth elements (REE) in industry determines their increased transport to the environment. The higher concentration of this group of elements in soils near roads may also suggest that traffic plays a significant role in their distribution. The aim of this study was to examine the content of REEs in selected consumables (car parts, asphalt) and environmental samples (plants, soils) in order to estimate the extent to which these elements derive from traffic and also to analyze their phytoextraction from soil by selected herbaceous plants species. Research materials were car parts (5 brake pads, 10 new tires - summer and winter), 20 samples of asphalt and road dust settled on its surface; soil, and 7 plants species growing at a distance of 1 m from the edge of the 5 roads located in the Wielkopolska Voivodeship, Poland. The content of REEs in the collected samples was determined using inductively coupled plasma optical emission spectrometer. The content of REEs in asphalt and brake pads was similar and significantly higher than in tires. According to the mass of particular stripped materials, the main source of these elements was asphalt. The amount of REEs released from tires to the environment was found to be much lower than REEs released from asphalt but generally higher than from brake pads. The content of REEs in the soil was found to increase in accordance with traffic intensity, but chemical composition of soil was the main determinant of the uptake these elements, mainly via the root systems of plants. The obtained results suggest that densely vegetated roadsides and verges could be an effective strategy for decontamination of soils polluted with REEs, although the most effective remedy would involve significant changes in the production technologies of automotive parts and asphalt that would limit the emission of elements to environment.

Metal Homeostasis and Gas Exchange Dynamics in Pisum sativum L. Exposed to Cerium Oxide Nanoparticles.

Cerium dioxide nanoparticles are pollutants of emerging concern. They are rarely immobilized in the environment. This study extends our work on Pisum sativum L. as a model plant, cultivated worldwide, and is well suited for investigating additive interactions induced by nanoceria. Hydroponic cultivation, which prompts accurate plant growth control and three levels of CeO2 supplementation, were applied, namely, 100, 200, and 500 mg (Ce)/L. Phytotoxicity was estimated by fresh weights and photosynthesis parameters. Additionally, Ce, Cu, Zn, Mn, Fe, Ca, and Mg contents were analyzed by high-resolution continuum source atomic absorption and inductively coupled plasma optical emission techniques. Analysis of variance has proved that CeO2 nanoparticles affected metals uptake. In the roots, it decreased for Cu, Zn, Mn, Fe, and Mg, while a reversed process was observed for Ca. The latter is absorbed more intensively, but translocation to above-ground parts is hampered. At the same time, nanoparticulate CeO2 reduced Cu, Zn, Mn, Fe, and Ca accumulation in pea shoots. The lowest Ce concentration boosted the photosynthesis rate, while the remaining treatments did not induce significant changes. Plant growth stimulation was observed only for the 100 mg/L. To our knowledge, this is the first study that demonstrates the effect of nanoceria on photosynthesis-related parameters in peas.

Pathogenicity and virulence of Acinetobacter baumannii: Factors contributing to the fitness in healthcare settings and the infected host.

Acinetobacter baumannii is a common cause of healthcare-associated infections and hospital outbreaks, particularly in intensive care units. Much of the success of A. baumannii relies on its genomic plasticity, which allows rapid adaptation to adversity and stress. The capacity to acquire novel antibiotic resistance determinants and the tolerance to stresses encountered in the hospital environment promote A. baumannii spread among patients and long-term contamination of the healthcare setting. This review explores virulence factors and physiological traits contributing to A. baumannii infection and adaptation to the hospital environment. Several cell-associated and secreted virulence factors involved in A. baumannii biofilm formation, cell adhesion, invasion, and persistence in the host, as well as resistance to xeric stress imposed by the healthcare settings, are illustrated to give reasons for the success of A. baumannii as a hospital pathogen.

Uptake and speciation of Zn and Pb by Miscanthus grown in contaminated soils.

The uptake by and distribution of Zn and Pb within a novel seed-based Miscanthus hybrid grown in contaminated soil was assessed. Results from juvenile plants in a pot-trial was compared with data for mature biomass of the same species harvested during a field-trial. Both Zn and Pb uptake by juvenile plants were observed to increase in proportion to the soil concentrations. Both Zn and Pb accumulation differed between leaf and stem structures, and both were different in the mature biomass compared with juvenile plants. Analysis of X-Ray Absorption Fine Structures (XAFS) revealed different Zn speciation in stems and leaves, and differences in Zn speciation with plant maturity. Sulfur ligands consistent with the presence of cysteine rich metallothioneins (MT) and phytochelatin (PC) complexes were the dominant Zn species in juvenile plant leaves, together with octahedral O/N species typified by Zn-malate. Sulfur ligands were also prevalent in stems from juvenile plants, but predominant O/N speciation shifted towards tetrahedral coordination. In contrast, tetrahedral Zn coordination with O/N species predominated in the mature biomass crop. The XAFS spectra for the mature biomass were consistent with Zn being retained within cell walls as pectin and/or phosphate complexes.

Novel Insights into Exogenous Phytohormones: Central Regulators in the Modulation of Physiological, Biochemical, and Molecular Responses in Rice under Metal(loid) Stress.

Rice (Oryza sativa) is a research model for monocotyledonous plants. Rice is also one of the major staple foods and the primary crop for more than half of the world's population. Increasing industrial activities and the use of different fertilizers and pesticides containing heavy metals (HMs) contribute to the contamination of agriculture fields. HM contamination is among the leading causes that affect the health of rice plants by limiting their growth and causing plant death. Phytohormones have a crucial role in stress-coping mechanisms and in determining a range of plant development and growth aspects during heavy metal stress. This review summarizes the role of different exogenous applications of phytohormones including auxin, cytokinin, gibberellins, ethylene, abscisic acid, strigolactones, jasmonates, brassinosteroids, and salicylic acids in rice plants for mitigating heavy metal stress via manipulation of their stress-related physiological and biochemical processes, and alterations of signaling and biosynthesis of genes. Exogenous administration of phytohormones and regulation of endogenous levels by targeting their biosynthesis/signaling machineries is a potential strategy for protecting rice from HM stress. The current review primarily emphasizes the key mechanistic phytohormonal-mediated strategies for reducing the adverse effects of HM toxicity in rice. Herein, we have provided comprehensive evidence for the effective role of exogenous phytohormones in employing defense responses and tolerance in rice to the phytotoxic effects of HM toxicity along with endogenous hormonal crosstalk for modulation of subcellular mechanisms and modification of stress-related signaling pathways, and uptake and translocation of metals. Altogether, this information offers a systematic understanding of how phytohormones modulate a plant's tolerance to heavy metals and may assist in directing the development of new approaches to strengthen rice plant resistance to HM toxicity.

Rice Husk-Based Adsorbents for Removal of Metals from Aqueous Solutions.

Adsorption is one of the main methods of water purification. Novel advanced, eco-friendly, cost-effective adsorbents with high adsorption capacity and selectivity are required to remove pollutants from aqueous solutions. Plant polymers are viewed as both prospective adsorbents and as raw materials to produce them instead of conventional adsorption materials. There is widespread interest in using rice husk as a universal sorbent to remove different contaminants from aqueous media because of its surplus availability, low cost, and high content of oxygen containing functional and silanol groups as active sites for adsorptive extraction. Different methods of heat and chemical treatments have been developed to improve the sorption properties of raw rice husk. Unmodified rice husk and rice-husk-based sorbents have been tested to uptake non-ferrous, ferrous, minor, precious, rare, and rare-earth metals and radionuclides from artificial and industrial solutions, natural contaminated water, and industrial wastewater. This review summarizes the results of numerous studies and characterizes the current state of work in this area, with recommendations for further development.

Strategic evaluation of limiting factors affecting algal growth - An approach to waste mitigation and carbon dioxide sequestration.

This work outlines major critical physico-chemical parameters that play a key role in increasing the fixation of CO2 from coal-fired flue gas CO2 into green microalgae biomass. Nitrogen concentration, gas flow rate, initial medium pH, and incident light intensity were determined to be the most important process variables with significant impact on CO2 fixation. Therefore, NaNO3 (500-3000 mg L-1), pH (6.8-8.0), light (50-200 mol m-2 s-1) and aeration (0.1-1.0 vvm) were varied to assess the biological assimilation potential of CO2 from the flue gas. The parameters that resulted in maximal CO2 fixation from raw flue gas, resulting in a maximum biomass density of 3.1 g L-1, were NaNO3 = 1500 mg L-1, pH =7.2-7.5, incident light intensity = 133.33 mol m-2 s-1, and 0.5-0.75 vvm aeration without any cost-incurring flue gas pre-treatment step. The inductively coupled plasma-mass spectrometer (ICP-MS) was used to investigate heavy metals uptake from raw flue gas, and it was discovered that no net intake of trace metals had a significant influence on biomass production. The research lays the path for efficient large-scale microalgal cultivations for industrial uses, as well as bolstering the circular economy concept.

Enhancing the lithium content of white button mushrooms Agaricus bisporus using LiNO3 fortified compost: effects on the uptake of Li and other trace elements.

Attempts to bio-enrich fungal biomass with an essential trace elements to produce dietary supplements have some tradition and an example is selenium. Lithium salts have medical applications, but safer forms are sought after, and lithiated foods and food supplements may be an alternative. This study evaluated the lithiation of white Agaricus bisporus mushrooms using commercial compost fortified with LiNO3 and investigated the effects on co-accumulation of trace elements. The fortifications at levels of 1.0, 5.0, 10, 50 and 100 mg·kg-1 dw, resulted in corresponding median increases in mushroom Li concentrations of 0.74, 5.0, 7.4, 19 and 21 mg kg-1 dw, respectively, relative to 0.031 mg kg-1 dw in control mushrooms. The bio-concentration potential for Li uptake decreased at higher levels of fortification, with saturation occurring at 100 mg·kg-1, and the level of 500 mg kg-1 mycelium failed to produce mushrooms. The compost fortification resulted in up to several hundred-fold enrichment of mushrooms compared to those grown on control compost, underlining their potential therapeutic use. At higher fortification levels, some effects were seen on the co-accumulation of other elements, such as Ag (stems), As, Cd, Cr, Cs, Cu, Hg (stems), Mn, Rb, Sr, U (stems) and Zn; 0.05 < p < 0.10), but no effects were seen for Ag (caps), Al, Ba, Co, Hg (caps) Ni, Tl, U (caps), and V (p > 0.05).

Insights into the accumulation and transformation of Ch-SeNPs by Raphanus sativus and Brassica juncea: Effect on essential elements uptake.

Selenium (Se) at very low doses has important functions for humans. Unfortunately, the low levels of Se in soils in various regions of the world have implemented the agronomic biofortification of crops by applying Se-enriched fertilizers (mainly based on selenate). Lately, the use of nanofertilizers is growing in interest as their low size reduces the amount of chemicals and minimizes nutrient losses in comparison with conventional bulk fertilizers. However, the knowledge on their fate and environmental impact is still scarce. This study aims to evaluate the biotransformation of chitosan-modified Se nanoparticles (Ch-SeNPs) as well as their effect on the metabolism of essential metals (Fe, Cu, Zn and Mo) when applied to hydroponic cultivation of R. sativus and B. juncea. In house-synthesized Ch-SeNPs were characterized in both synthesis and hydroponic culture media by transmission electron microscopy (TEM), dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA). The composition of one-tenth strength Hoagland's solution did not affect the size, shape and concentration in number of particles per mL of Ch-SeNPs. The plants were grown inside a box at 25 °C during the months of May-July in 2018. After a week of treatment with Ch-SeNPs, plants were harvested and divided into roots and aerial part. The biotransformation of Ch-SeNPs was evaluated through a process of enzymatic hydrolysis and subsequent analysis by HPLC-ICP-MS and HPLC-ESI-MS/MS. The results confirmed the transformation of Ch-SeNPs to seleno-amino acids: Selenomethionine (SeMet), Semethylselenocysteine (SeMetSeCys) and É£-glutamyl-Se-MetSeCys. Moreover, Multiple-way analysis of variance (ANOVA) and principal component analysis (PCA) showed that, regardless the plant species, Ch-SeNPs supplementation affected the absorption of Zn.

Maize productivity, heavy metals uptake and their availability in contaminated clay and sandy alkaline soils as affected by inorganic and organic amendments.

Contamination of arid and semi-arid ecosystems by toxic heavy metals is a serious concern due to its impact on growth and productivity of crop and health risk through food chain. Therefore, the aims of this investigation were to study the impact of inorganic (i.e. nano hydroxyapatite, NHA and polyacrylamide, PAM) and organic (i.e. sugar beet factory lime, SBFL and biochar, BI) soil amendments on maize productivity grown in contaminated silty clay (i.e. fluvial, lacustrine) and sandy (i.e. marine) alkaline soils. In addition, the effect of those amendments on the content of heavy metals in plant organs and their fractions in alkaline soils at harvest as well as human health risk assessment were investigated. Application of amendments, particularly SBFL, followed by NHA and BI resulted in an improvement for maize growth and its productivity in comparison to PAM application and untreated soil. However, application of NHA significantly reduced the mobile fraction of Cd, Pb and Ni in soil and consequently in different maize organs, followed by application of SBFL and BI in comparison to untreated soil or soil treated with PAM. Additionally, transfer factors and health risk of metals were lesser when NHA and SBFL were applied into soil than those obtained from application of PAM. In conclusion, applications of NHA, SBFL and BI into contaminated alkaline soils with toxic heavy metals can be considered a vital option for ameliorating such soils from the view of environment and sustainable management in terms of heavy metals immobilization and reducing the metals content in plant organs.

Arsenic and Lead Uptake by Vegetable Crops Grown on an Old Orchard Site Amended with Compost.

The potential for lead (Pb) and arsenic (As) transfer into vegetables was studied on old orchard land contaminated by lead arsenate pesticides. Root (carrot), leafy (lettuce), and vegetable fruits (green bean, tomato) were grown on seven "miniplots" with soil concentrations ranging from near background to ≈ 800 and ≈ 200 mg kg-1 of total Pb and As, respectively. Each miniplot was divided into sub-plots and amended with 0% (control), 5% and 10% (by weight) compost and cropped for 3 years. Edible portions of each vegetable were analyzed for total Pb and As to test the effect of organic matter on transfer of these toxic elements into the crop. Vegetable Pb and As concentrations were strongly correlated to soil total Pb and As, respectively, but not to soil organic matter content or compost addition level. For Pb vegetable concentrations, carrot ≥ lettuce > bean > tomato. For As, lettuce > carrot > bean > tomato. A complementary single-year study of lettuce, arugula, spinach, and collards revealed a beneficial effect of compost in reducing both Pb and As concentrations in leafy vegetables. Comparisons of all measured vegetable concentrations to international health-based standards indicate that tomatoes can be grown without exceeding standards even in substantially Pb- and As-contaminated soils, but carrots and leafy greens may exceed standards when grown in soils with more than 100-200 mg kg-1 Pb. Leafy greens may also exceed health-based standards in gardens where soil As is elevated, with arugula having a particularly strong tendency to accumulate As.

Concentrations of lead, cadmium and barium in urban garden-grown vegetables: the impact of soil variables.

Paired vegetable/soil samples from New York City and Buffalo, NY, gardens were analyzed for lead (Pb), cadmium (Cd) and barium (Ba). Vegetable aluminum (Al) was measured to assess soil adherence. Soil and vegetable metal concentrations did not correlate; vegetable concentrations varied by crop type. Pb was below health-based guidance values (EU standards) in virtually all fruits. 47% of root crops and 9% of leafy greens exceeded guidance values; over half the vegetables exceeded the 95th percentile of market-basket concentrations for Pb. Vegetable Pb correlated with Al; soil particle adherence/incorporation was more important than Pb uptake via roots. Cd was similar to market-basket concentrations and below guidance values in nearly all samples. Vegetable Ba was much higher than Pb or Cd, although soil Ba was lower than soil Pb. The poor relationship between vegetable and soil metal concentrations is attributable to particulate contamination of vegetables and soil characteristics that influence phytoavailability.

Crescimento da cultura da cenoura após aplicações de resíduos de curtume e carboniferos no solo / Growth of carrot crop after application of tannery waste and coal mining in soil

Com a industrialização, a produção de resíduos tem aumentado durante os anos. Além disso, a disposição destes resíduos é uma posição discutida entre os órgãos ambientais. Em virtude disto, o objetivo foi estudar o efeito residual de adições sucessivas de resíduos de curtume e carboníferos sobre as propriedades químicas do solo e o acumulo de metais pesados nas plantas de cenoura. Os tratamentos aplicados a campo foram T1 = Controle, somente solo; T2 = Adubação com NPK + calcário para atingir pH 6,0; T3 = Lodo de curtume em quantidade adequada para atingir pH 6,0 + PK; T4 = Duas vezes a quantidade de lodo de curtume utilizada no tratamento 3 + PK; T5 = Resíduo carbonífero + NPK + calcário em quantidade adequada para atingir pH 6,0; T6 = Resíduo carbonífero + lodo de curtume em quantidade adequada para atingir pH 6,0 + PK; T7 = Serragem cromada + NPK + calcário em quantidade adequada para atingir pH 6,0; T8 = Cr mineral + lodo de curtume em quantidade adequada para atingir pH 6,0 + PK. O experimento foi conduzido em delineamento inteiramente casualizado, com três repetições por tratamento. A adição de cromo, tanto via mineral, quanto via resíduos não afetaram o crescimento da cenoura. Além disso, os teores encontrados na parte aérea, radicular, e córtex da raiz são considerados baixos, demonstrando um baixo potencial de contaminação destes resíduos.

With the industrialization, waste production has been increased over the years. Moreover, the disposition of these wastes is a position discussed among environmental agencies. So, the aim of this study was to evaluate the residual effect of successive additions of tannery waste and coal on the chemical properties of the soil and the accumulation of heavy metals in carrot plants. The treatments were applied to field: T1 = Control, only solo; T2 = fertilization with NPK + lime to reach pH 6.0; T3 = tannery sludge in adequate quantity to achieve pH 6.0 + PK; T4 = Twice the amount tannery sludge used in treatment 3 + PK; T5 = waste coal + NPK + lime in adequate quantity to achieve pH 6.0; T6 = waste coal + tannery sludge in adequate quantity to achieve pH 6.0 + PK; T7 = Sawdust = chrome + NPK + lime in adequate quantity to reach pH 6.0; T8 = Cr + mineral tannery sludge in adequate quantity to achieve pH 6.0 + PK. The experiment was conducted in a completely randomized design, with three replicates per treatment. The results demonstrate that carrot plants grew normally in the treatments with high chromium concentrations, either addition with residues or mineral. Furthermore, the levels found in the shoots, roots and roots cortex were low, indicating a low potential of these waste contamination.