RESUMEN
To mitigate the environmental impact of the improper disposal of spent LiFePO4 batteries and reduce resource waste, the development of LiFePO4 recycling technologies is of paramount importance. Meanwhile, olivine-structured NaFePO4 in sodium-ion batteries has received great attention, due to its high theoretical specific capacity of 154 mAh g-1 and excellent stability. However, olivine NaFePO4 only can be synthesized from olivine LiFePO4. Accordingly, in this proposal, developing the continuous flow electrochemical solid-liquid reactor-based metal ion insertion technology is to utilize the olivine FePO4, recycled from LiFePO4, and to synthesize NaFePO4. Additionally, by employing I- as the reducing agent, NaFePO4 is successfully synthesized with a discharge-specific capacity of 134 mAh g-1 at 0.1C and a remarkable capacity retention rate of 86.5% after 100 cycles at 0.2C. And the reasons for sodium deficiency in the synthesized NFP are elucidated through first-principles calculations. Furthermore, the kinetics of the solid-solution reaction 2 (Na2/3+ßPO4â Na1-αFePO4) mechanism improve with cycling and are sensitive to temperature. Utilizing a minimal amount of reducing agent in the electrochemical reactor, NaFePO4 synthesis is successfully achieved. This innovative approach offers a new, cost-effective, and environmentally friendly strategy for preparing NaFePO4 from recycling LiFePO4.
RESUMEN
Olivine FePO4 is widely regarded as an optimal cathode material for sodium-ion batteries due to its impressive theoretical capacity of 177.7 mAh g-1. Nonetheless, the material's limited application stems from its intrinsic low electronic and ionic conductivities and ion diffusion rate. Previously, most modifications of olivine FePO4 are conducted through electrochemical or ion exchange processes in organic solvents, which severely restricted its potential for large-scale applications. In this research, a novel water-based ion exchange method is proposed for the synthesis of Ni-doped, Mn-doped, and Ni, Mn co-doped FePO4@C, which is non-toxic, cost-effective, and demonstrating promising prospects for various applications. Fe2.7Mn0.2Ni0.1PO4@C (0.2Mn0.1Ni-FP@C) is synthesized by a straightforward ion exchange method in aqueous media. The material exhibits a discharge capacity of 154.4 mAh g-1 at 0.1C rate. After 300 cycles at 1C, the capacity retention rate remains at 70.7 %. Numerous tests and calculations conducted in this study demonstrate that 0.2Mn0.1Ni-FP@C, modified through Mn3+ and Ni3+ co-doping, exhibits superior electrochemical performance due to its enhanced electronic conductivity and ion diffusion rate.
RESUMEN
The surface of olivine NaFePO4 was modified with polythiophene (PTh) to develop a high-performance cathode material for use in Na-ion batteries. The Rietveld refinement results of the prepared material reveal that PTh-coated NaFePO4 belongs to a space group of Pnma with lattice parameters of a = 10.40656 Å, b = 6.22821 Å, and c = 4.94971 Å. Uncoated NaFePO4 delivers a discharge capacity of 108 mAh g(-1) at a current density of 10 mA g(-1) within a voltage range of 2.2-4.0 V. Conversely, the PTh-coated NaFePO4 electrode exhibits significantly improved electrochemical performance, where it exhibits a discharge capacity of 142 mAh g(-1) and a stable cycle life over 100 cycles, with a capacity retention of 94%. The NaFePO4/PTh electrode also exhibits satisfactory performance at high current densities, and reversible capacities of 70 mAh g(-1) at 150 mA g(-1) and 42 mAh g(-1) at 300 mA g(-1) are obtained compared with negligible capacities without coating. The related electrochemical reaction mechanism has been investigated using in situ X-ray absorption spectroscopy (XAS), which revealed a systematic change of Fe valence and reversible contraction/expansion of Fe-O octahedra upon desodiation/sodiation. The ex situ X-ray diffraction (XRD) results suggest that the deintercalation in NaFePO4/PTh electrodes proceeds through a stable intermediate phase and the lattice parameters show a reversible contraction/expansion of unit cell during cycling.
RESUMEN
Olivine NaFePO4/C microsphere cathode is prepared by a facile aqueous electrochemical displacement method from LiFePO4/C precursor. The NaFePO4/C cathode shows a high discharge capacity of 111 mAh g(-1), excellent cycling stability with 90% capacity retention over 240 cycles at 0.1 C, and high rate capacity (46 mAh g(-1) at 2 C). The excellent electrochemical performance demonstrates that the aqueous electrochemical displacement method is an effective and promising way to prepare NaFePO4/C material for Na-based energy storage applications. Moreover, the Na2/3FePO4 intermediate is observed for the first time during the Na intercalation process through conventional electrochemical techniques, corroborating an identical two-step phase transition reaction both upon Na intercalation and deintercalation processes. The clarification of the electrochemical reaction mechanism of olivine NaFePO4 could inspire more attention on the investigation of this material for Na ion batteries.
RESUMEN
NaFePO4 with an olivine structure is synthesized via chemical delithiation of LiFePO4 followed by electrochemical sodiation of FePO4. Butylmethylpyrrolidinium-bis(trifluoromethanesulfonyl)imide (BMP-TFSI) ionic liquid (IL) with various sodium solutes, namely NaBF4, NaClO4, NaPF6, and NaN(CN)2, is used as an electrolyte for rechargeable Na/NaFePO4 cells. The IL electrolytes show high thermal stability (>350 °C) and nonflammability, and are thus ideal for high-safety applications. The highest conductivity and the lowest viscosity of the electrolyte are obtained with NaBF4. At an elevated temperature (above 50 °C), the IL electrolyte is more suitable than a conventional organic electrolyte for the sodium cell. At 75 °C, the measured capacity of NaFePO4 in a NaBF4-incorporated IL electrolyte is as high as 152 mAh g(-1) (at 0.05 C), which is near the theoretical value (154 mAh g(-1)). Moreover, 60% of this capacity can be retained when the charge-discharge rate is increased to 1 C.